User manual SYLVANIA 6626LG

26 inch Digital / Analog LCD TV Owner's Manual 6626LG POWER INPUT SLEEP SELECT 1 4 7 SETUP 2 5 8 0 3 6 AUDIO 9 STILL SCREEN MODE ENTER BACK INFO CH RETURN VOL. MUTE CH STANDBY POWER ON HIGH-DEFINITION TELEVISION TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-605-8453, OR VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS-All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS-The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS-All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS-All operating and use instructions should be followed. 5. CLEANING-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. ATTACHMENTS-Do not use attachments not recommended by the TV manufacturer as they may cause hazards. 7. WATER AND MOISTURE-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. ACCESSORIES-Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. PORTABLE CART WARNING Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to S3126A overturn. SYMBOLE D'AVERTISSEMENT POUR AMEUBLES- Cet appareil ne doit être placé LES COMPOSANTES APPAREIL ET MEUBLE A ROULETTES que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l'installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l'utilisation d'une force excessive et des surfaces irrégulières risquent de déstaS3126A biliser l'ensemble et de le renverser. 9. VENTILATION-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. POWER SOURCES-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions. 11. GROUNDING OR POLARIZATION-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. POWER-CORD PROTECTION-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. OUTDOOR ANTENNA GROUNDING-If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the leadin wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A 2 14. LIGHTNING-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges. 15. POWER LINES-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or EN 16. 17. 18. 19. where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. OVERLOADING-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. SERVICING-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance, this indicates a need for service. 20. REPLACEMENT PARTS-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. SAFETY CHECK-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. HEAT-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. PRECAUTIONS · · · · Place your TV in a room with adequate ventilation. Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. Do not place your TV on soft surfaces, such as rugs or blankets. Leave enough room for air to circulate around the bottom, top and back of the set. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the owner's manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Model No. Serial No. Dealer Purchase from Date of Purchase Dealer Phone No. Dealer Address A NOTE ABOUT RECYCLING: This produc's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. 3 EN IMPORTANT SAFEGUARDS / PRECAUTIONS SUPPLIED ACCESSORIES · Owner's Manual (1EMN21880) · Remote control unit (NF000UD: Black / Silver) or (NF006UD: Black) · Batteries ("AA" x 2) · If you need to replace these accessories, please refer to the PART NO, with the illustrations and call our help line mentioned on the front page. · Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator (Splitter). Contact your local electronics store for these items. FEATURES · DTV/TV/CATV This TV lets you easily switch TV(NTSC) and DTV(ATSC) with the remote control. This feature enables you to simply view from conventional analog TV to Standard Definition TV, High Definition TV. You can also connect this TV to CATV if you have a CATV box. · Program Information Display (DTV) You can display the title, contents and other information of the current DTV program on the screen. · Autoscan This TV can automatically scan and memorize the channels receivable in your residential area. This feature eliminates the need of a difficult setting procedure. · V-CHIP This feature lets you set the viewing limitations to prevent your children from watching inappropriate programs. · Closed Caption Decoder This TV contains the built-in Closed Caption Decoder that displays text across the screen. It allows you to read the dialogue of a TV program or other information in the Closed Caption-supported programs. · MTS/SAP Tuner This feature allows you to select with the remote control your desired audio language. · Auto Shut Off Function If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn itself off automatically. · On-Screen Function Display (English / Spanish / French) This feature lets you select the language displayed in the setup screen from English, Spanish or French. · Stereo Sound Function · Full-Function Remote Control · PLL Frequency Synthesized Tuning · HDMI Input This TV accepts 480i / 480p / 720p / 1080i video signals and 32kHz / 44.1kHz / 48kHz audio signals. · Component VIDEO Input This TV accepts 480i / 480p / 720p / 1080i video signals. · S-VIDEO Input · AV Input · Analog Audio Output · Digital Audio Output (Coaxial) · Resume This feature will automatically memorize settings if a power failure occurs. 4 EN CONTENTS FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 REMOTE CONTROL, TOP AND REAR PANEL FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BATTERY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CONNECTION TO CABLE/SATELLITE BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 HDMI CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 COMPONENT CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 S-VIDEO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 ANALOG AUDIO/VIDEO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 AUDIO OUTPUT CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 CHANNEL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 AUTOSCAN . . . . . . . . . . . . CHANNEL LIST . . . . . . . . . MANUAL REGISTER . . . . . ANTENNA CONFIRMATION LANGUAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 14 15 16 17 18 18 19 19 20 21 22 23 23 24 25 26 26 28 31 WATCHING TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 CHANNEL SELECTION . . . . . . . . . . . . . . . VOLUME ADJUSTMENT . . . . . . . . . . . . . . . STILL MODE . . . . . . . . . . . . . . . . . . . . . . . . SWITCHING AUDIO . . . . . . . . . . . . . . . . . . SWITCHING EXTERNAL INPUT . . . . . . . . . CHANGING THE SCREEN DISPLAY MODE SCREEN INFORMATION . . . . . . . . . . . . . . SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . SETUP SCREEN . . . . . . . PICTURE ADJUSTMENT . CLOSED CAPTION . . . . . . DTV CLOSED CAPTION . . CLOSED CAPTION STYLE V-CHIP . . . . . . . . . . . . . . . HDMI AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPTIONAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 MISCELLANEOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BACK COVER SYMBOLS USED IN THIS MANUAL The following is the description for the symbols used in this manual. TV DTV : Settings only for the analog mode : Settings only for the digital mode · If there is no symbol under the function heading, those are common settings for the analog mode and digital mode. 5 EN SUPPLIED ACCESSORIES / FEATURES / CONTENTS IMPORTANT SAFEGUARDS PRECAUTIONS . . . . . . . . . . SUPPLIED ACCESSORIES . FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 4 4 FUNCTIONS REMOTE CONTROL, TOP AND REAR PANEL FUNCTION SLEEP button (p23) To turn the power off automatically at POWER INPUT SLEEP SELECT INPUT SELECT button (p20) To select TV or external input mode (to access DVD, VCR, etc.) POWER button (p12) To turn TV on/off AUDIO button (p19) 1 4 7 SETUP Channel number buttons (p18) To select channels 2 5 8 0 3 6 AUDIO SETUP button (p14) To display on-screen menu s / B / K / L buttons (p12) To move left / right / up / down through · Analog mode (TV) To select audio mode · Digital mode (DTV) To select audio language 9 STILL STILL button (p19) Pauses the image shown on the screen SCREEN MODE SCREEN MODE button (p21) Selects aspect ratios available for the ENTER button (p12) To decide the command of setting when the menu is displayed BACK button (p22) To go back to the previous operation in menu VOL. X/ Y buttons (p18) To adjust volume ENTER BACK INFO INFO button · Analog mode (TV) (p22) To display channel No., signal type and TV setting · Digital mode (DTV) (p22) To display channel information, signal type and TV setting · External mode (p20) To display external mode, signal type and TV setting CH RETURN VOL. MUTE CH MUTE button (p18) To mute sound CH RETURN button (p18) To return to previously viewed channel CH K/ L buttons (p18/p20) To select channels and external input mode SETUP button (p14) To display on-screen menu VOLUME X/ Y buttons (p18) To adjust volume and move right(X)/left(Y) through the menu items CHANNEL K/ L buttons (p18) TV CONTROL SETUP VOLUME CHANNEL INPUT SELECT/ ENTER POWER To select channels and move up/down through the menu items POWER button To turn TV on/off INPUT SELECT/ENTER button (p20/p12) · To select TV or external input mode (to access DVD, VCR, etc.) · To decide the command of setting when the menu is displayed Infrared Sensor Window STANDBY POWER ON To receive the infrared rays transmitted from the remote control NOTE: 6 EN With buttons [VOL. X/Y] or [MUTE], you can only adjust the volume of the main unit. You cannot adjust the volume of the external devices with these buttons. ANT. IN jack Connect your antenna or cable box here. DIGITAL AUDIO OUT (COAXIAL) jack Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver. ANT. IN L AUDIO OUT DIGITAL AUDIO OUT (COAXIAL) R R HDMI L AUDIO HDMI IN AUDIO OUT jacks Connect the supplied audio cable here through the audio in jacks of audio equipment. HDMI IN jacks Connect HDMI cable and audio cable coming from the HDMI and audio out jack of external devices. Rear of this TV from underneath Y ANT. IN DIGITAL AUDIO OUT (COAXIAL) L AUDIO OUT R AUDIO R HDMI IN L AUDIO R Pr L Pb AUDIO R L Y VIDEO VIDEO Pb AUDIO Pr L AUDIO R VIDEO2 L S-VIDEO1 R VIDEO1 S-VIDEO2 HDMI INNER JACKS INNER JACKS COMPONENT2 COMPONENT1 from underneath Y Y VIDEO VIDEO Pb L AUDIO R COMPONENT2 Pr L AUDIO R Pb L Pr AUDIO R COMPONENT1 VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 S-VIDEO1 COMPONENT IN jacks Connect component cable and audio cable coming from the component and audio out jack of external devices. S-VIDEO IN jacks Connect S-video cable and audio cable coming from the S-video and audio jack of external devices. VIDEO IN jacks Connect video cable and audio cable coming from the video and audio out jack of external devices. INSTALLING THE BATTERIES Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. [BATTERY PRECAUTIONS] · Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. · Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. · If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. · Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. 7 EN FUNCTIONS PREPARATION FOR USE CONNECTION This section describes how to connect this TV to reception and other sources. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive digital signal. NOTE: Be sure that antenna or cable is connected properly before plugging the power cord. [ANTENNA CABLE CONNECTION] 1) When connecting TV to antenna Connect the RF cable or antenna cable on your home outlet to the ANT. IN jack of this TV. 2) When connecting TV to RF/Incoming cable (without box) Connect the RF cable or incoming cable on your home outlet to the ANT. IN jack of this TV. Aerial antenna RF Cable Y ANT. IN DIGITAL AUDIO OUT (COAXIAL) L AUDIO OUT R AUDIO R HDMI IN L AUDIO R Pr L Pb AUDIO R L Y VIDEO VIDEO Pb AUDIO Pr L AUDIO R VIDEO2 L S-VIDEO1 R VIDEO1 S-VIDEO2 HDMI INNER JACKS INNER JACKS COMPONENT2 COMPONENT1 or Cable TV signal Incoming Cable ANT. IN Cables not included Rear of this TV NOTES: · For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit. · If you use an antenna in order to receive analog TV, the same antenna generally will work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions. · To easily switch between antenna and cable wires, you can purchase "Antenna Selector" commercially available. · If you connect cable system directly, contact the CATV installer. *Once connections are completed, turn on the TV and begin initial setup. Channel scanning is necessary for the TV to memorize all available channels in your area if using antenna or RF/Incoming cable. (Refer to "INITIAL SETTINGS" on page 12.) [CONNECTION TO CABLE/SATELLITE BOX] 1) Connect the antenna cable on your home outlet to the input jack of the CABLE/SATELLITE box. 2) Use the corresponding cable to connect the ANT. IN jack of this TV and the output jack of the CABLE/SATELLITE box. *Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more information, please contact the cable/satellite provider. Satellite antenna CABLE Box or SATELLITE Box Cable TV signal or RF Cable ANT. IN Y ANT. IN DIGITAL AUDIO OUT (COAXIAL) L AUDIO OUT R AUDIO R HDMI IN L AUDIO R Pr L Pb AUDIO R L Y VIDEO VIDEO Pb AUDIO Pr L AUDIO R VIDEO2 L S-VIDEO1 R VIDEO1 S-VIDEO2 HDMI INNER JACKS INNER JACKS COMPONENT2 COMPONENT1 Cables not included Rear of this TV 8 EN EXTERNAL CONNECTION [HDMI CONNECTION] 1) This is the best method to connect this TV to video devices with the HDMI output jack, such as DVD player with HDMI output jack, etc. It can minimize the deterioration of image quality. Use the HDMI cable (commercially available) for connection. To HDMI INPUT jack HDMI OUT ANT. IN L AUDIO OUT L AUDIO R HDMI HDMI IN To HDMI output jack DVD Player with the HDMI output jack Cables not included DIGITAL AUDIO OUT (COAXIAL) R Rear of this TV NOTES: This TV accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals. This TV accepts only 2 channel audio signal (LPCM). You need to select "PCM" for the digital audio output of the device you connect or the HDMI audio setting. Audio sometimes makes no sound if you select "Bitstream", etc.. This TV only accept signals corresponding EIA861. 2) When your video devices has the DVI output jack, use the HDMI conversion cable from DVI output jack (commercially available) for connection as illustrated below. To DVI output jack DVI OUT To HDMI INPUT jack ANT. IN L AUDIO OUT L AUDIO R HDMI HDMI IN Cable Box or Satellite Box with the DVI output jack AUDIO OUT R L DIGITAL AUDIO OUT (COAXIAL) R To audio output jacks Cables not included To AUDIO INPUT jacks Rear of this TV NOTES: This TV accepts 480i / 480p / 720p / 1080i video signals. Audio signals are converted to an analog signal from the digital if you make a connection above. DVI does not show image if the 480i does not accept EIA/CEA-861/861B. "HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." 9 EN PREPARATION FOR USE [COMPONENT CONNECTION] 1) This is a better method to connect this TV to video devices with the Component output jack, such as DVD player, etc. Use the Component cable (commercially available) for connection. If you connect component output jack to COMPONENT1 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT1. If you connect component output jack to COMPONENT2 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT2. To component video output jacks Y To COMPONENT1 INPUT jacks Y VIDEO VIDEO Pb L L Pr AUDIO R COMPONENT2 Pb L Pr AUDIO R COMPONENT1 VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 DVD Player with the component video output jacks AUDIO R S-VIDEO1 To audio output jacks Cables not included To AUDIO INPUT jacks Rear of this TV NOTE: This TV accepts 480i / 480p / 720p / 1080i video signals. [S-VIDEO CONNECTION] 1) This is a good method to connect this TV to the video devices with the S-video output jack. You can expect better picture quality than the normal video cable connection. Use the S-video cable (commercially available) for connection. If you connect S-video output jack to S-VIDEO1 input jack, connect an audio cable to AUDIO L/R jacks of VIDEO1. If you connect S-video output jack to S-VIDEO2 input jack, connect an audio cable to AUDIO L/R jacks of VIDEO2. To S-VIDEO1 INPUT jack To S-video output jack AUDIO OUT VIDEO S-VIDEO OUT OUT L AUDIO Pr Y Y VIDEO VIDEO Pb L AUDIO R COMPONENT2 Pb L Pr AUDIO R COMPONENT1 VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 S-VIDEO1 DVD/VCR with the S-video output jack To audio output jacks R Cables not included To AUDIO INPUT jacks Rear of this TV NOTE: If you connect to the S-VIDEO jack and the VIDEO jack at the same time, S-video connection will have priority. 10 EN [ANALOG AUDIO/VIDEO CONNECTION] 1) This is the general method to connect this TV to video devices with the video and audio output jacks, such as VCR, Camcorder, Video Game, etc.. When the audio jack of video devices is monaural, connect this TV to the Audio L jack. To VIDEO1 INPUT jack Y Y VIDEO VIDEO AUDIO OUT VIDEO OUT L Pb L Pr AUDIO R COMPONENT2 Pb L Pr AUDIO R COMPONENT1 VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 Camcorder Video Game To audio output jacks VCR Cables not included AUDIO R S-VIDEO1 To AUDIO INPUT jacks Rear of this TV [AUDIO OUTPUT CONNECTION] 1) If you connect this TV to an external audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use the Digital Audio Coaxial cable or Audio cable (commercially available) for connection. To DIGITAL AUDIO OUTPUT jack MD deck, DAT deck etc. COAXIAL ANT. IN L AUDIO OUT L AUDIO R HDMI HDMI IN To coaxial digital audio input jack DIGITAL AUDIO OUT (COAXIAL) R Rear of this TV To AUDIO OUTPUT jacks Dolby Digital decoder or AUDIO IN To audio input jacks Stereo system Cables not included Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. 11 EN PREPARATION FOR USE To video output jack INITIAL SETTINGS Hint: Before starting initial setup you must connect antenna. INITIAL SETTINGS This section describes the initial settings when you first turn on the power after purchase. The initial setting items are shown below. · LANGUAGE SELECTION You can select the menu language displayed on the screen among English, Spanish and French. · AUTOSCAN (TV/DTV) (Select "Air" when using antenna) The channels broadcasted in TV and DTV are automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized. · AUTOSCAN (CATV) (Select "Cable" when using RF/Incoming cable) The channels broadcasted in CATV are automatically scanned and memorized. POWER INPUT SLEEP SELECT 3 Select your language using [K /L], press [ENTER]. When you first turn on the power, the following screen is displayed. Initial Setup Select the language used for setup. Elija idioma de preparación. Sélectionner langue écran config. English Español Français Select ENTER Enter SETUP Exit The Antenna Confirmation will be displayed in the selected language after you press [ENTER]. 4 Select destination of ANT. IN jack using [K /L], press [ENTER]. Initial Setup Make sure the antenna is connected to "ANT. IN" jack. Select the destination of "ANT. IN" jack. Air Air Cable Cable Or ANT. IN 1 4 7 SETUP 2 5 8 0 3 6 AUDIO Select ENTER Enter BACK Back SETUP Exit 9 STILL 5 Autoscan will start automatically. Initial Setup Now the system is scanning for channels,please wait. SCREEN MODE 5% ENTER BACK INFO Analog channels Digital channels 1ch 0ch SETUP Exit 1 2 After making all the necessary connections, turn on this TV. Press [POWER]. Initial Setup menu will appear. · This operation may take a few moments. · If Initial Setup menu does not appear press and hold [ENTER] for 3 seconds, initial setup will appear then proceed to step 3. If you have already turned on this TV before, refer to "LANGUAGE SELECTION" on page 17 to select a language for the on-screen displays. · When scanning is completed, the smallest memorized channel will be displayed. NOTES: · The initial Autoscan function can be executed for either "Air" or "Cable" only once. When you change the connection (Air/Cable), set the "Autoscan" again. (Refer to page 13.) · When the scanning is not completed, Helpful Hint will be displayed every time you turn on the power. If you have previously registered channels when this screen appears you can select a channel with number buttons. 2-0 No channel is registered. Press and hold "ENTER" key for 3 seconds. Contact support hotline provided on manual or back of unit. Sin canal registrado. Mantenga oprimida la tecla "ENTER" durante 3 segundos. Llame teléfono de apoyo en manual o atrás de TV. Pas de chaîne consign. Maintenir la touche "ENTER" pressée 3 secondes. Contacter numero d'urgence dans manuel ou arrière appareil. · Support hotline is provided on the front page of this manual. 12 EN CHANNEL SETTINGS AUTOSCAN If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, you need to perform Autoscan again. This function lets you easily select the receivable channels with [CH K/L] and the TV memorizes them even if you switch wires. STILL 3 For TV channels, using [K /L], select "Air". For CATV channels, select "Cable". Autoscan Autoscan will rescan all channels. This may take a while to complete. Select the destination of "ANT. IN" jack. Back Air Cable Cable 1hour Air Cable Or ANT. IN SETUP SCREEN MODE ENTER BACK INFO · Press [ENTER]. Scanning and memorizing the channels automatically starts. Now the system is scanning for channels, please wait. CH RETURN VOL. MUTE CH 72% Analog channels Digital channels SETUP 10ch 6ch Exit NOTE: