User manual SYLVANIA 6637LCT

37 inch Digital / Analog LCD TV Owner's Manual 6637LCT A 6637LCT POWER INPUT SLEEP SELECT 1 4 7 SETUP 2 5 8 0 3 6 AUDIO 9 STILL SCREEN MODE ENTER BACK INFO CH RETURN VOL. MUTE CH HIGH-DEFINITION TELEVISION TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. 5. CLEANING - Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. ATTACHMENTS - Do not use attachments not recommended by the TV manufacturer as they may cause hazards. 7. WATER AND MOISTURE - Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. ACCESSORIES - Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. PORTABLE CART WARNING Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to S3126A overturn. AMEUBLES - Cet appareil ne doit être placé SYMBOLE D'AVERTISSEMENT POUR LES COMPOSANTES APPAREIL ET MEUBLE A ROULETTES que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l'installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l'utilisation d'une force excessive et des surfaces irrégulières risquent de déstaS3126A biliser l'ensemble et de le renverser. 9. VENTILATION - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. POWER SOURCES - This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions. 11. GROUNDING OR POLARIZATION - This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the leadin wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A 14. LIGHTNING - For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges. 2 EN 15. POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. 18. SERVICING - Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. DAMAGE REQUIRING SERVICE - Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance, this indicates a need for service. 20. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. SAFETY CHECK - Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. HEAT - This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. PRECAUTIONS · · · · Place your TV in a room with adequate ventilation. Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. Do not place your TV on soft surfaces, such as rugs or blankets. Leave enough room for air to circulate around the bottom, top and back of the set. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the owner's manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Model No. Serial No. Dealer Purchase from Date of Purchase Dealer Phone No. Dealer Address A NOTE ABOUT RECYCLING: This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. 3 EN IMPORTANT SAFEGUARDS / PRECAUTIONS SUPPLIED ACCESSORIES · Owner's Manual (1EMN21968A) · Remote control unit (NF000UD) · Batteries ("AA" x 2) · If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our toll free customer support line found on the cover of this manual. · Depending on your antenna system, you may need different types of Combiners (Mixers) or Separator (Splitters). Contact your local electronics store for these items. FEATURES · DTV/TV/CATV You can use your remote control to select channels which are broadcast in conventional analog, standard definition, and high definition formats. Also, cable subscribers can access their cable TV channels. · Program Information Display (DTV only) You can display the title, contents and other information of the current DTV program on the screen. · Autoscan This TV can automatically scan and memorize the channels receivable in your residential area. This feature eliminates the need of a difficult setting procedure. · V-CHIP This feature allows you to block children's access to inappropriate programs. · Closed Caption Decoder This TV contains the built-in Closed Caption Decoder that displays text across the screen. It allows you to read the dialogue of a TV program or other information in the Closed Caption-supported programs. · MTS/SAP Tuner This feature allows you to select with the remote control your desired audio language. · Auto Shut Off Function If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn itself off automatically. · Choices for On-Screen Menu Language Select your setup menu language: English, Spanish or French. · Stereo Sound Function · Full-Function Remote Control · PLL Frequency Synthesized Tuning · HDMI Input This TV accepts 480i / 480p / 720p / 1080i video signals and 32kHz / 44.1kHz / 48kHz audio signals. · Component VIDEO Input This TV accepts 480i / 480p / 720p / 1080i video signals. · S-VIDEO Input · AV Input · Analog Audio Output · Digital Audio Output (Coaxial) · Resume This feature will automatically memorize settings if a power failure occurs. 4 EN CONTENTS FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 REMOTE CONTROL, TOP AND REAR PANEL FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BATTERY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CONNECTION TO CABLE/SATELLITE BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CONNECTING OTHER DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 COMPONENT CABLE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 S-VIDEO CABLE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 VIDEO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 DIGITAL AUDIO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 ANALOG AUDIO CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 INITIAL SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 CHANNEL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 AUTOSCAN . . . . . . . . . . . . CHANNEL LIST . . . . . . . . . MANUAL REGISTER . . . . . ANTENNA CONFIRMATION LANGUAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 14 15 16 17 18 18 19 19 20 21 22 23 23 24 25 26 26 28 31 WATCHING TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 CHANNEL SELECTION . . . . . . . . . . . . . . . VOLUME ADJUSTMENT . . . . . . . . . . . . . . STILL MODE . . . . . . . . . . . . . . . . . . . . . . . SELECTING AUDIO CHANNELS . . . . . . . . ACCESSING EXTERNAL DEVICES . . . . . . CHANGING THE SCREEN DISPLAY MODE SCREEN INFORMATION . . . . . . . . . . . . . . SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . SETUP SCREEN . . . . . . . PICTURE ADJUSTMENT . CLOSED CAPTION . . . . . . DTV CLOSED CAPTION . . CLOSED CAPTION STYLE V-CHIP . . . . . . . . . . . . . . . HDMI AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPTIONAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 MISCELLANEOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover SYMBOLS USED IN THIS MANUAL The following is the description for the symbols used in this manual. TV DTV : Analog TV operation. : Digital TV operation. · If neither symbol appears under the function heading, operation is applicable to both. 5 EN SUPPLIED ACCESSORIES / FEATURES / CONTENTS IMPORTANT SAFEGUARDS PRECAUTIONS . . . . . . . . . . SUPPLIED ACCESSORIES . FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 4 4 FUNCTIONS REMOTE CONTROL, TOP AND REAR PANEL FUNCTION SLEEP button (p23) Press to activate the sleep timer. POWER INPUT SLEEP SELECT INPUT SELECT button (p20) Press to access connected external devices like a DVD recorder or VCR. AUDIO button (p19) · Analog mode (TV) Selects audio mode. · Digital mode (DTV) Selects audio language. POWER button (p12) Press to turn the TV on and off. Number buttons (p18) Press to select a channel. 1 4 7 SETUP 2 5 8 0 3 6 AUDIO SETUP button (p23) Press to display on-screen menu. s / B / K / L buttons (p12) To move left / right / up / down through the items. 9 STILL STILL button (p19) Press to pause screen image. SCREEN MODE SCREEN MODE button (p21) Press to select screen aspect ratio. ENTER button (p12) Press to confirm your selection. BACK ENTER INFO INFO button · Analog mode (TV) (p22) To display channel No., signal type and TV setting. · Digital mode (DTV) (p22) To display channel information, signal type and TV setting. · External input mode (p20) To display external input mode, signal type and TV setting. BACK button (p22) Press to return to previous menu operation. VOL. X/ Y buttons (p18) Press to adjust volume. VOL. CH RETURN MUTE CH MUTE button (p18) Press to turn sound on and off. CH RETURN button (p18) Press to return to previously viewed channel. CH K/ L buttons (p18/p20) To select channels and external input mode. SETUP button (p23) To display on-screen menu. VOLUME X/ Y buttons (p18) To adjust volume and move right(X)/left(Y) through the menu items. CHANNEL K/ L buttons (p18) TV CONTROL SETUP VOLUME CHANNEL INPUT SELECT/ ENTER POWER To select channels and move up/down through the menu items. POWER button (p12) To turn TV on/off. INPUT SELECT/ENTER button (p20/p12) · To access connected external devices like a DVD recorder or VCR. · To decide the command of setting when the menu is displayed. Infrared Sensor Window STANDBY POWER ON Receives infrared rays transmitted from the remote control. NOTE: 6 EN · With buttons [VOL. X/ Y] or [MUTE], you can only adjust the volume of the main unit. You cannot adjust the volume of the external devices with these buttons. ANT. IN jack Coaxial cable connection for your antenna or cable box. DIGITAL AUDIO OUT (COAXIAL) jack Digital audio coaxial cable connection for decoder or audio receiver. Connect cable to DIGITAL AUDIO IN jack of external device. AUDIO OUT jacks Audio cable connection for external audio equipment. Use AUDIO IN jacks of external equipment. AUDIO jacks (for DVI connection) Audio cable connection for external audio/video devices with DVI jack. Use AUDIO OUT jacks of external equipment when using an HDMI-DVI conversion cable. HDMI IN jack Rear of this TV HDMI cable connection for external video equipment (i.e.DVD recorder). ANT. IN L AUDIO OUT DIGITAL AUDIO OUT (COAXIAL) R L AUDIO R HDMI HDMI IN from underneath Y ANT. IN DIGITAL AUDIO OUT (COAXIAL) L AUDIO OUT R AUDIO R HDMI IN L AUDIO R Pr L Pb AUDIO R L Y VIDEO VIDEO Pb AUDIO Pr L AUDIO R VIDEO2 L S-VIDEO1 R VIDEO1 S-VIDEO2 HDMI COMPONENT2 COMPONENT1 COMPONENT1 and AUDIO jacks Component cable connection for external audio/video devices. Use component and audio out jacks of external device. COMPONENT2 and AUDIO jacks Component cable connection for external audio/video devices. Use component and audio out jacks of external device. from underneath Y Y VIDEO VIDEO Pb L AUDIO R COMPONENT2 Pr L AUDIO R Pb L Pr AUDIO R COMPONENT1 VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 S-VIDEO1 jack S-Video cable and audio (VIDEO1) cable connection for external video equipment. S-VIDEO2 jack S-Video cable and audio (VIDEO2) cable connection for external video equipment. S-VIDEO1 VIDEO2 and AUDIO jacks Video and audio cable connection for external equipment. VIDEO1 and AUDIO jacks Video and audio cable connection for external equipment. INSTALLING THE BATTERIES Install two AA batteries (included) matching the polarity (++ / ­ ­) indicated inside battery compartment of the remote control. [BATTERY PRECAUTIONS] · Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. · Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. · If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. · Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. 7 EN FUNCTIONS PREPARATION FOR USE CONNECTION This section describes how to connect your TV to an antenna, cable box, etc. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive a digital signal. NOTE: · Be sure your antenna or other source is connected properly before plugging in the power cord. [ANTENNA CABLE CONNECTION] 1) When connecting your TV to an antenna Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV. 2) When connecting TV to cable TV company (without box) Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV. VHF / UHF antenna Rear of this TV Coaxial cable (not included) or ANT. IN Y ANT. IN DIGITAL AUDIO OUT (COAXIAL) L AUDIO OUT R AUDIO R HDMI IN L AUDIO R Pr L Pb AUDIO R Pr L Pb AUDIO R VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 L S-VIDEO1 Y VIDEO VIDEO HDMI COMPONENT2 COMPONENT1 Cable TV company Coaxial cable (not included) *Once connections are completed, turn on the TV and begin initial setup. Channel scanning is necessary for the TV to memorize all available channels in your area. (Refer to "INITIAL SETUP" on page 12.) NOTES: · For your safety and to avoid damage to equipment, please unplug the coaxial cable from the ANT.IN jack before moving the unit. · If you use an antenna in order to receive analog TV, the same antenna generally will work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions. · To easily switch between antenna and cable wires, you can purchase an "Antenna Selector" commercially available. · If you connect a cable system directly, contact the CATV installer. [CONNECTION TO CABLE/SATELLITE BOX] 1) Connect the coaxial cable on your home outlet to the input jack of the CABLE/SATELLITE box. 2) Use another coaxial cable to connect the ANT. IN jack of your TV to the output jack of the CABLE/SATELLITE box. *Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more information, please contact your cable/satellite provider. Rear of this TV Cable box or Satellite box Satellite dish or Y ANT. IN DIGITAL AUDIO OUT (COAXIAL) L AUDIO OUT R AUDIO R HDMI IN L AUDIO R Pr L Pb AUDIO R Pr L Pb AUDIO R VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 L S-VIDEO1 Y VIDEO VIDEO HDMI COMPONENT2 COMPONENT1 Cable TV company Coaxial cable (not included) Coaxial cable (not included) ANT. IN 8 EN CONNECTING OTHER DEVICES [HDMI] 1) High Definition Multimedia Interface (HDMI) uses the latest technology to ensure the signal maintains the highest degree of integrity from source to TV. Both video and audio travel through a single cable. To HDMI IN jack HDMI OUT ANT. IN L AUDIO OUT L AUDIO R HDMI HDMI IN To HDMI output jack DVD Player with the HDMI output jack DIGITAL AUDIO OUT (COAXIAL) R Rear of this TV NOTES: · This TV accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals. · This TV accepts only 2 channel audio signal (LPCM). · You need to select "PCM" for the digital audio output of the device you connect or the HDMI audio setting. Audio sometimes makes no sound if you select "Bitstream", etc. · This TV only accepts signals corresponding EIA861. 2) When your video device has a DVI output jack, connect the HDMI conversion cable (not included) from the DVI output jack. HDMI-DVI conversion cable (not included) To DVI output jack DVI OUT To HDMI IN jack ANT. IN L AUDIO OUT L AUDIO R HDMI HDMI IN Cable Box or Satellite Box with the DVI output jack AUDIO OUT R L DIGITAL AUDIO OUT (COAXIAL) R To audio output jacks To AUDIO Rear of this TV input jacks Audio cable (not included) NOTES: · This TV accepts 480i / 480p / 720p / 1080i video signals. · An HDMI conversion cable requires a separate audio cable connection as well. · Audio signals are converted from digital to analog if you make the connection in paragraph 2) above. · DVI does not show image if the 480i does not accept EIA/CEA-861/861B. "HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." 9 EN PREPARATION FOR USE HDMI cable (not included) [COMPONENT CABLE CONNECTION] Offers better picture quality for video devices connected to your TV. Use a component video cable (not included) to connect your TV to external video devices equipped with component video jacks. If you connect to your TV's COMPONENT1 input jack, connect audio cables to the AUDIO L/R jacks of COMPONENT1. If you connect to your TV's COMPONENT2 input jack, connect audio cables to the AUDIO L/R jacks of COMPONENT2. Component video cable (not included) To component video output jacks Y To COMPONENT1 input jacks Y VIDEO VIDEO Pb L L Pr AUDIO R COMPONENT2 Pb L Pr AUDIO R COMPONENT1 VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 DVD Player with the component video output jacks To audio output jacks Audio cable (not included) AUDIO R S-VIDEO1 To AUDIO input jacks Rear of this TV NOTE: · This TV accepts 480i / 480p / 720p / 1080i video signals. [S-VIDEO CABLE CONNECTION] Offers good picture quality for video devices connected to your TV. Use an S-video cable (not included) to connect your TV to external video devices equipped with S-video connectors. If you connect to your TV's S-VIDEO1 input jack, connect audio cables to the AUDIO L/R jacks of VIDEO1. If you connect to your TV's S-VIDEO2 input jack, connect audio cables to the AUDIO L/R jacks of VIDEO2. To S-VIDEO1 input jack S-video cable (not included) To S-Video output jack AUDIO OUT VIDEO S-VIDEO OUT OUT L AUDIO Pr Y Y VIDEO VIDEO Pb L AUDIO R COMPONENT2 Pb L Pr AUDIO R COMPONENT1 VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 S-VIDEO1 DVD/VCR with the S-Video output jack To audio output jacks R Audio cable (not included) To AUDIO Rear of this TV input jacks NOTE: · If you connect to the S-VIDEO jack and the VIDEO jack at the same time, the S-video connection will have priority. 10 EN [VIDEO CONNECTION] Offers standard picture quality for video devices connected to your TV. When the audio jack of the video device is monaural, connect the audio cable to the audio L input jack. Video cable (not included) To video output jack AUDIO OUT VIDEO OUT L To VIDEO1 input jack Y VIDEO VIDEO Y Pb L Pr AUDIO R COMPONENT2 Pb L Pr AUDIO R COMPONENT1 VIDEO2 L AUDIO R VIDEO1 S-VIDEO2 Camcorder Video Game To audio output jacks VCR AUDIO R S-VIDEO1 Audio cable (not included) To AUDIO Rear of this TV input jacks [DIGITAL AUDIO CONNECTION] If you connect this TV to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Required digital audio coaxial cable not included. Digital audio coaxial cable (not included) To DIGITAL AUDIO OUT jack MD deck, DAT deck, etc. COAXIAL ANT. IN L AUDIO OUT L AUDIO HDMI IN R R HDMI To coaxial digital audio input jack DIGITAL AUDIO OUT (COAXIAL) Rear of this TV Dolby Digital decoder Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. [ANALOG AUDIO CONNECTION] If you connect this TV to an external analog audio device, you can enjoy stereophonic (2 channel) audio sound. Required audio cable not included. To audio input jacks AUDIO IN ANT. IN L AUDIO OUT DIGITAL AUDIO OUT (COAXIAL) R R HDMI L AUDIO HDMI IN Stereo system Audio cable (not included) To AUDIO OUT jacks Rear of this TV 11 EN PREPARATION FOR USE INITIAL SETTINGS INITIAL SETUP This section will guide you through your TV's initial set up which includes selecting a language for your on-screen menu and AUTOSCAN, which automatically scans and memorizes viewable channels. POWER INPUT SLEEP SELECT 3 When you first turn on your TV, the following screen is displayed. Use [K /L] to select the on-screen menu language from the choices on the right side of the screen. Initial Setup Select the language for setup display. Elija idioma de preparación. Sélectionner langue écran config. English Español Français 1 4 7 SETUP 2 5 8 0 3 6 AUDIO Select ENTER Enter SETUP Exit 9 STILL SCREEN MODE The Antenna Confirmation menu on step 4 will be displayed in the selected language after you press [ENTER]. ENTER BACK INFO 4 Select source of ANT. IN jack using [K /L], then press [ENTER]. Initial Setup Make sure the antenna is connected to "ANT IN" jack. Select the destination of "ANT IN" jack. Air 1 2 After making all the necessary connections, turn on your TV. Press [POWER]. Initial Setup menu will appear. · This operation may take a few moments. · If Initial Setup menu does not appear, press and hold [ENTER] for 3 seconds, initial setup will appear then proceed to step 3. If initial set up has already been completed, refer to "LANGUAGE SELECTION" on page 17. Air Cable Cable Or ANT IN Select ENTER Enter BACK Back SETUP Exit 5 Autoscan will start automatically. Initial Setup Now the system is scanning for channels,please wait. 5% Analog channels Digital channels 1ch 0ch SETUP Exit · When scanning has completed, the lowest memorized channel will be displayed. NOTES: · The initial Autoscan function can be executed for either "Air" or "Cable" only once. When you change the connection (Air/Cable), set the "Autoscan" again. (Refer to page 13.) · If you connect a cable system directly, contact the CATV installer. · When the scanning is not complete, Helpful Hint will be displayed every time you turn on the power. If you have previously registered channels when this screen appears you can select a channel with [the Number buttons]. 2-0 No channel is registered. Press and hold "ENTER" key for 3 seconds. Contact support hotline provided on manual or back of unit. Sin canal registrado. Mantenga oprimida la tecla "ENTER" durante 3 segundos. Llame teléfono de apoyo en manual o atrás de TV. Pas de chaîne consign. Maintenir la touche "ENTER" pressée 3 secondes. Contacter numero d'urgence dans manuel ou arrière appareil. · Toll free customer support line can be found on the cover of this manual. 12 EN CHANNEL SETTINGS AUTOSCAN With AUTOSCAN, your TV automatically scans and memorizes your area's viewable channels. Activate AUTOSCAN when you turn on your TV for the first time, change broadcast sources (e.g. from antenna to CATV), or move your TV to a different broadcast area. STILL 3 For TV channels, using [K /L], select "Air". For CATV channels, select "Cable". Autoscan Autoscan will rescan all channels. This may take a while to complete. Select the destination of "ANT IN" jack. Back Air Cable Cable 1hour Air Cable Or ANT IN SETUP SCREEN MODE ENTER BACK INFO · Press [ENTER]. Scanning and memorizing the channels automatically starts. Now the system is scanning for channels, please wait. CH RETURN VOL. MUTE CH 72% Analog channels Digital channels SETUP 10ch 6ch Exit NOTE: · Make sure the TV is connected to antenna or cable. 1 Display the setup screen. · Press [SETUP]. The following setup screen appears. · When the scanning and memorizing are completed, the lowest memorized channel in the broadcasting will be displayed. NOTES: · If you connect a cable system directly, contact the CATV installer. · If you press [POWER] or [SETUP] during Autoscan, this setting will be canceled. · If there is no reception connected or a poor signal is detected, a Hint will appear on screen once scanning stops. 2 Select "CHANNEL" and press [ENTER] to confirm. · Using [K /L], select "Autoscan". Channel Autoscan Channel List Manual Register Antenna · Press [ENTER]. 13 EN INITIAL SETTINGS / CHANNEL SETTINGS - 0 CHANNEL LIST This function lets you remove undesired channels from the Channel Registration List. 7 SETUP 3 8 0 SCREEN MODE Select the channel you want to remove. · Using [K/L], select the channel. Channel List Highlight channels for Ch Up/Down key selection. 9 STILL DTV DTV 6 8 9 27 DTV