User manual SYLVANIA SRCD223

OWNER'S MANUAL COLOR TV/DVD/VHS SRCD223 (23 inch) SRCD227 (27 inch) This Owner's Manual is made of recycled paper. SUPPLIED ACCESSORIES ACCESSORIES PART NO. 2 AA Batteries Remote Control Unit NE204UD INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. Batteries If you need additional operating assistance after reading this owner's manual, please call TOLL FREE : 1-800-968-3429. Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1.Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions-The safety and operating instructions should be retained for future reference. 3.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions-All operating and use instructions should be followed. 5.Cleaning-Unplug TV/DVD/VHS from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6.Attachments-Do not use attachments not recommended by the TV/DVD/VHS manufacturer as they may cause hazards. 7.Water and Moisture-Do not use this TV/DVD/VHS near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8.Accessories-Do not place this TV/DVD/VHS on an unstable cart, stand, tripod, bracket, or table. The TV/DVD/VHS may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/DVD/VHS. Any mounting of PORTABLE CART WARNING the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care.Quick stops, excessive force, and uneven S3126A surfaces may cause the appliance and cart combination to overturn. AMEUBLES- Cet appareil ne doit SYMBOLE D'AVERTISSEMENT POUR LES être placé que sur un meuble (avec APPAREIL ETCOMPOSANTES MEUBLE A ROULETTES ou sans roulettes) recommandé par le fabricant. Si vous l'installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l'utilisation d'une force excessive et des surS3126A faces irrégulières risquent de déstabiliser l'ensemble et de le renverser. 9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/DVD/VHS and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/DVD/VHS on a bed, sofa, rug, or other similar surface. This TV/DVD/VHS should never be placed near or over a radiator or heat register. This TV/DVD/VHS should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10.Power Sources-This TV/DVD/VHS should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/DVD/VHSs intended to operate from battery power, or other sources, refer to the operating instructions. 11.Grounding or Polarization-This TV/DVD/VHS is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. -2- EN 1B15 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/DVD/VHS, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14.Lightning-For added protection for this TV/DVD/VHS receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/DVD/VHS due to lightning and power-line surges. 15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17.Object and Liquid Entry-Never push objects of any kind into this TV/DVD/VHS through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD/VHS. 18.Servicing-Do not attempt to service this TV/DVD/VHS yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19.Damage Requiring Service-Unplug this TV/DVD/VHS from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV/DVD/VHS. c. If the TV/DVD/VHS has been exposed to rain or water. d. If the TV/DVD/VHS does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/DVD/VHS to its normal operation. e. If the TV/DVD/VHS has been dropped or damaged in any way. f. When the TV/DVD/VHS exhibits a distinct change in performance-this indicates a need for service. 20.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21.Safety Check-Upon completion of any service or repairs to this TV/DVD/VHS, ask the service technician to perform routine safety checks to determine that the TV/DVD/VHS is in proper operating condition. 22.Heat-This TV/DVD/VHS product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. -3- EN 1B15 PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. -4- EN 1B15 LOCATION For safe operation and satisfactory performance of your TV/DVD/VHS, keep the following in mind when selecting a place for its installation: · Shield it from direct sunlight and keep it away from sources of intense heat. · Avoid dusty or humid places. · Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. · Install unit in a horizontal position. · Avoid locations subject to strong vibration. · Do not place the TV/DVD/VHS near strong magnetic fields. · Avoid moving TV/DVD/VHS to locations where temperature differences are extreme. WARNING Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a DVD is played in a TV/DVD/ VHS which has moisture, it may damage the DVD and TV/DVD/VHS. Therefore when the condensation occurs inside the unit, turn the POWER button on and allow at least 2 hours for the unit to dry out. AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE · Do not handle the power cord with wet hands. · Do not pull on the power cord when disconnecting · · · it from an AC wall outlet. Grasp it by the plug. If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. Do not put your fingers or objects into the TV/DVD/VHS disc loading tray. Do not place anything directly on top of the unit. A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. The serial number of this product may be found on the back of the unit. No other TV/DVD/VHS has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file. Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No. -5EN 1C29 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 WARNING . . . . . . . . . . . . . . . . . . . .5 C FEATURES . . . . . . . . . . . . . . . . . . . .7 C OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . . . . . . . . . . .9 C PREPARATION FOR USE . . . . . . .11 ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . . . . .11 CONNECTIONS TO FRONT A/V JACKS . . . . . . . . . . . . . . . . . . . . . .12 INSTALLING THE BATTERIES . .12 CONNECTING TO A STEREO SYSTEM . . . . . . . . . . . . . . . . . . . .13 CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS, MD DECK OR DAT DECK (for DVD) . . . . . . . . . . . . . . . . . . . .13 CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER (for DVD) . . .14 C SET UP FOR USE . . . . . . . . . . . . .15 CHANNEL SET UP FOR THE FIRST TIME . . . . . . . . .15 DELETING (OR ADDING) CHANNEL . . . . . . . . . . . . . . . . . . .15 CHANNEL SET UP AGAIN . . . . . .16 SELECTING THE LANGUAGE . .16 DAYLIGHT-SAVING TIME . . . . . .16 CLOCK SET UP (AUTO / MANUAL) . . . . . . . . . . . .17 TV/VCR SECTION C TV OPERATION . . . . . . . . . . . . . . .19 WATCHING A TV PROGRAM . . .19 DEGAUSSING . . . . . . . . . . . . . . . .19 PICTURE CONTROL . . . . . . . . . . .19 CLOSED CAPTION SYSTEM . . . .20 V-CHIP SET UP . . . . . . . . . . . . . . .21 C MTS(Multi-Channel Television sound)SYSTEM . . . . . . . . . . . . . . . .23 CHECKING THE SELECTED MTS MODE . . . . . . . . . . . . . . . . . .23 MTS RECORDING/MONITOR MODE . . . . . . . . . . . . . . . . . . . . . .23 SELECTING THE MTS SYSTEM .24 C VIDEO CASSETTE . . . . . . . . . . . . .25 PICTURE SEARCH . . . . . . . . . . . .26 STILL PICTURE . . . . . . . . . . . . . .26 VERTICAL HOLD CONTROL . . .26 C SPECIAL PLAYBACK . . . . . . . . . .27 RENTAL PLAYBACK . . . . . . . . . .27 AUTO REPEAT PLAYBACK . . . . .27 C SEARCH . . . . . . . . . . . . . . . . . . . . .28 ZERO RETURN . . . . . . . . . . . . . . .28 TIME SEARCH . . . . . . . . . . . . . . .28 INDEX SEARCH . . . . . . . . . . . . . .29 C SPECIAL FEATURES . . . . . . . . . .29 REAL TIME TAPE COUNTER . . .29 AUTO REWIND-EJECT . . . . . . . .29 C RECORDING . . . . . . . . . . . . . . . . .30 NORMAL RECORDING . . . . . . . .30 SKIPPING UNWANTED SCENES DURING RECORDING . . . . . . . . . . . . . . . . .30 OTR (One Touch Recording) . . . . . .31 COPYING A VIDEO CASSETTE (Requires a VCR or camcorder) . . .31 C TIMER . . . . . . . . . . . . . . . . . . . . . .32 AUTOMATIC TIMER RECORDING . . . . . . . . . .32 TIMER PROGRAM EXTENSION .33 HINTS FOR AUTOMATIC TIMER RECORDING . . . . . . . . . . . . . . . . .34 AUTO RETURN . . . . . . . . . . . . . . .34 SLEEP TIMER . . . . . . . . . . . . . . . .34 C ON SCREEN DISPLAY . . . . . . . . .35 C CABLE CHANNEL DESIGNATIONS . . . . . . . . . . . . . .35 DVD SECTION C ABOUT THE DISCS . . . . . . . . . . . .36 PLAYABLE DISCS . . . . . . . . . . . .36 DISC TYPES . . . . . . . . . . . . . . . . .36 SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . . .36 C PLAYING A DISC . . . . . . . . . . . . . .37 PLAYING A DVD VIDEO OR AN AUDIO CD . . . . . . . . . . . . . . . . . . .36 USING THE DVD MENUS . . . . . .36 USING THE TITLE MENU . . . . . .36 RESUMING PLAYBACK FROM THE POINT WHERE PLAYBACK STOPPED . . . . . . . . .38 FAST FORWARD/REVERSE . . . . .38 PAUSING PLAYBACK OR DISPLAYING A STILL PICTURE . . . . . . . . . . . . .38 STEPPING THROUGH FRAMES .38 SLOW MOTION . . . . . . . . . . . . . .39 PLAYING FROM A DESIRED TITLE OR CHAPTER . . . . . . . . . .39 STARTING FROM A DESIRED TIME COUNT . . . . . . . . . . . . . . . . .39 STARTING FROM A DESIRED TRACK . . . . . . . . . . . . . . . . . . . . . .39 REPEAT . . . . . . . . . . . . . . . . . . . . .40 A-B REPEAT . . . . . . . . . . . . . . . . .40 MARKER . . . . . . . . . . . . . . . . . . . .41 PROGRAM (Audio CD) . . . . . . . . .41 RANDOM (Audio CD) . . . . . . . . . .42 ZOOM PLAYBCK . . . . . . . . . . . . .42 PLAYING AN MP3 DISC . . . . . . . .42 CHANGING THE ONSCREEN DISPLAY DURING MP3 DISC PLAY . . . . . . . . . . . . . . . . . .43 PLAYING AN MP3 DISC FROM A DESIRED TRACK . . . . . . . . . . .43 PLAYING AN MP3 DISC IN A PROGRAMMED WAY . . . . . . . . . .43 PLAYING AN MP3 DISC AT RANDOM . . . . . . . . . . . . . . . . . . . .44 C SETTINGS . . . . . . . . . . . . . . . . . . .44 CHANGING THE AUDIO LANGUAGE OR SOUND MODE .44 CHANGING THE SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . .45 CHANGING THE CAMERA ANGLE (Multi-Angle Pictures) . . . .45 CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . . .46 C CHANGING THE SETUP ITEMS .47 LANGUAGE SETTINGS . . . . . . . .47 DISPLAY SETTINGS . . . . . . . . . . .48 AUDIO SETTINGS . . . . . . . . . . . .49 PARENTAL LOCK . . . . . . . . . . . . .50 C LANGUAGE CODE LIST . . . . . . . .51 C TROUBLESHOOTING GUIDE . . .52 C MAINTENANCE . . . . . . . . . . . . . . .55 DISC HANDLING . . . . . . . . . . . . .55 C SPECIFICATIONS . . . . . . . . . . . . .56 C WARRANTY . . . . . . . . . . .Back Cover C PLAYBACK . . . . . . . . . . . . . . . . . . .26 NORMAL PLAYBACK . . . . . . . . .26 TRACKING ADJUSTMENT . . . . .26 SLOW MOTION . . . . . . . . . . . . . .26 -6- EN 1C29 FEATURES TV/VCR · Hi-Fi system­The Hi-Fi stereo recording system · · · offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter. Rotary 4-head Record/Playback System­Four heads ensure excellent picture quality and special effects playback. Index Search­Fast-forwards to start of next recording. Slow Motion­View recorded program at slower than normal speed. · 2 Step picture search operation­You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode. For SP mode only high speed. · Three different playback tape speeds : SP/LP/SLP · Two different recording tape speeds : SP/SLP · Auto Head Cleaner­Automatically cleans video heads as you insert or remove a cassette. · Infrared remote control · Trilingual on screen tv/vcr setup display selectable in English or Spanish or French · Zero Return­The tape returns to counter of 0:00:00 by rewinding or fast forwarding. viewing of a particular scene. · Still­"Freeze" the picture at any time, for close · Digital Auto Tracking (DTR)­Automatically · · · · adjusts the tracking for each tape you play. Rental play mode­Improves playback picture quality from worn tapes, such as rental tapes. Auto repeat­Allows you to repeat the playing of a tape indefinitely without pressing the PLAY button. Time search­Let you set the TV/DVD/VHS to advance the tape by entering the desired playback time you want to skip. OTR (One Touch Recording)­Instant timed recording from 30 to 480 minutes is possible at the push of the REC/OTR button. Timer Recording)­The built-in timer allows you to · Real time counter­This shows the elapsed recording or playback time in hours, minutes, and seconds. The "­" indication will appear when the tape is rewound further than the tape counter position "0:00:00". er tuner with direct station call­(A converter may · 181 channel capability PLL frequency synthesizbe necessary to view scrambled cable channels.) · Auto Clock Setting­Allows you to set the clock · function from a PBS broadcast station. Closed caption system­You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. · Auto power on and off system­Automatically · Auto rewind when the end of a tape is timer recording. · 1 Year, 8 events (including Daily and Weekly turns on the TV/DVD/VHS when you insert the cassette, turns off after auto-rewind, and ejects when the beginning of the tape is reached. reached­This function doesn't occur when using · Smooth mode change­TV/VCR mode, DVD mode automatically changes without control. · · · record up to 8 programs at different times on different channels up to 1 year in advance. The Daily timer allows recordings to be made of daily broadcasts, and the Weekly timer allows recording to be made once a week up to the end of the tape. Auto return­After timer recording is finished, the TV/DVD/VHS can return to the beginning of the recording. Sleep timer­Allows you to have the TV/DVD/VHS automatically turn on or off at a desired time. Timer Program Extension­Allow you to shift the time schedule for automatic timer recording. V-CHIP­Enables parents to prevent their children from watching inappropriate material on TV. A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. -7EN 1C29 DVD ¡Dolby Digital surround ¡On-screen display This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder. ¡Still/fast/slow/step playback Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames. ¡Random playback for audio CD and MP3 This player can shuffle the order of tracks to play them in random order. ¡Program playback for audio CD and MP3 You can program the order of tracks to play them in any desired order. ¡DVD menus in a desired language You can display DVD menus in a desired language, if available on a DVD. ¡Screen saver/Auto power-off functions The screen saver program starts when there is no input from the player for five minutes in the stop mode. When the screen saver program is activated for 30 minutes, the DVD power is automatically turned off, and "DVD" appears on the screen. ¡Subtitles in a desired language You can select a desired language for the display subtitles, if that language is available on a disc. ¡Selecting a camera angle You can select the desired camera angle, if a disc contains sequences recorded from different angles. ¡Choices for audio language and sound mode You can select the desired audio language and sound mode, if different languages and modes are available on a disc. ¡Parental lock You can set the control level to limit playback of discs which may not be suitable for children. ¡Automatic detection of discs This player automatically detects if a loaded disc is DVD, audio CD or MP3 on disc. ¡Playing an MP3 disc You can enjoy MP3 files which are recorded on CDR/RW. ¡Direct Search You can search the desired title, chapter, and track with numeric button during playback or in stop mode. · Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control. Sleep timer Allows you to have the TV/DVD/VHS automatically turn off at a desired time. You can enjoy 5.1channel surround system developed by the Digital Theater System co. which reproduces the original sound as truthfully as possible. ¡DTS (Digital Theater System) ¡Search Chapter search: Search for the chapter designated by user is possible. Title search: Search for the title designated by user is possible. Track search: Search for the track designated by user is possible. Time search: Search for the time designated by user is possible. ¡Repeat Repeated playback of the chapter of the disc being played is possible. Title: Repeated playback of the title of the disc being played is possible. Track: Repeated playback of the track of the disc being played is possible. Disc(audio CD): Repeated playback of the entire disc being (MP3) played is possible. A-B: The part between A and B designated by user is possible. Album: Repeated playback of the folder of the MP3 disc being played is possible. ¡Zoom Chapter: 2-time and 4-time magnified screen can be displayed. ¡Marker The part designated by user can be called back. ¡Resume Play Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. User can resume to playback from the part at which the play was stopped. ¡SRS TruSurround You can enjoy stereophonic virtual space on your existing stereo system. ¡Bit rate indication ¡DRC (Dynamic range control) This unit employs TruSurround system of SRS Labs, Inc. as virtual technology. TruSurround and the SRS Labs, Inc. symbol are trademarks of TruSurround technology is incorporated under license from SRS Labs, Inc. NOTE: · We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control. -8EN 1C29 OPERATING CONTROLS AND FUNCTIONS - TV/DVD/VHS FRONT PANEL - [Fig.1] POWER VOLUME SKIP PLAY SKIP STOP OPEN/CLOSE SELECT CHANNEL REC/OTR REW PLAY F.FWD STOP/EJECT HEADPHONE VIDEO L AUDIO R DVD SEARCH TV/VCR 7 8 9 10 11 12 13 14 4 15 16 17 18 19 20 21 6. OPEN/CLOSE button [DVD P.37] [Fig. 2] - REMOTE CONTROL Press to insert discs into or remove them from the tray. 7. Disc loading tray 8. DVD indicator POWER PICTURE SLEEP SELECT Lights on during DVD mode. 1 45 9. SELECT button 44 22 Press to change to TV/VCR mode or DVD mode. 1 2 3 CH. NOTE: For about 4 seconds just after the DVD 11 4 5 6 23 mode has switched to the TV mode, the button does not work to switch back to the DVD mode. 7 8 9 VOL. PAUSE +100 2 10. TV/VCR indicator 0 +10 24 Lights on during TV/VCR mode. SPEED C.RESET ZOOM MUTE 25 43 11. CHANNEL K/L buttons 26 42 Press to select memorized channel. PLAY 3 (DVD) (DVD) 3 NOTE: Also use these buttons to select the front 15 (TV/VCR) (TV/VCR) 14 STOP A/V input. (See page12) DISC 4 5 RECORD MENU 12. Recording indicator 13 41 Flashes during recording. Lights up in the StandDISPLAY 40 by mode for Timer Recording. ENTER 27 39 SETUP TITLE RETURN 13. REC/OTR (RECORD) button [TV/VCR P.28] 28 38 Press for manual recording. Activates One Touch 29 A-B CLEAR SEARCH MODE REPEAT 37 30 Recording. (OTR is only during TV/VCR mode.) AUDIO SUBTITLE ANGLE MODE 14. REW button (for TV/VCR) [TV/VCR P.26] 31 36 Press to rewind the tape, or to view the picture 35 32 rapidly in reverse during playback mode. (Rewind 33 34 Search) 15. FWD button (for TV/VCR) [TV/VCR P.26] Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. 1. POWER button [TV/VCR P.15 / DVD P.37] (Forward Search) Press to turn the power on and off. 16. STOP/EJECT button [TV/VCR P.28] 2. VOLUME X/Y buttons Press to stop the tape motion. Press in the Stop Press to control the volume level for the DVD and TV. mode to remove tape from the unit. 3. SKIP buttons (for DVD)[P.37] 17. Remote sensor window Skip chapters or tracks to a desired point. 18. HEADPHONE jack 4. PLAY button [TV/VCR P.26 / DVD P.37] To connect headphone (not supplied) for personal Starts playback of the disc or tape contents. listening. 5. STOP button [P.37] 19. VIDEO input jack Stops operation of the disc. Connect to the video output jack of a video camera or VCR. -9EN 1C29 1 2 343 5 6 - TV/DVD/VHS REAR PANEL - [Fig.3] 20. AUDIO L/R input jacks Connect to the audio output jacks of a video camera or VCR. To access the front A/V input see ITEM 11 or ITEM 23. 21. Cassette compartment 22. PICTURE button Press to adjust the picture. 23. Number buttons TV Mode:[P.15] Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel. +100 button­ Press to select cable channels which are equal or greater than number 100. DVD Mode: Press to enter the desired number. +10 button­ Press to enter the desired numbers which are equal or greater than number 10. 00 Numbers­ By pressing the numbers 00 automatically switches the TV to the front A/V input. 24. PAUSE button [TV/VCR P.26 / DVD P.38] Pauses the current disc or tape operation. 25. SPEED button [TV/VCR P.30] Press to choose the desired recording speed: SP/SLP. 26. C.RESET button [TV/VCR P.28] Press to reset counter to 0:00:00. Press to cancel a setting of timer program. (See page 33.) 27. DISPLAY button TV/VCR Mode: 30. CLEAR button Resets a setting. 31. MODE button [DVD P.41] Activates program playback or random playback mode. 32. SEARCH MODE button [DVD P.39] Press to locate a desired point. 33. AUDIO button [DVD P.44] Press to select a desired audio language or sound mode. 34. SUBTITLE button [DVD P.45] Press to select a desired subtitle language. 35. REPEAT button [DVD P.40] Repeats playback of the current disc, title, chapter or track. 36. ANGLE button (DVD mode) [DVD P.45] Press to change the camera angle to see the sequence being played back from a different angle. 37. A-B REPEAT button [DVD P.40] Repeats playback of a selected section. 38. RETURN button Returns to the previous operation. 39. ENTER button Press to accept a setting. 40. Arrow buttons TV/VCR Mode: Press to select a setting mode from the menu on the TV screen. Press to select or adjust from a particular menu. DVD Mode: Use when making settings while watching the display on a TV screen. 41. DISC MENU button [DVD P.37] Displays the menus in the DVD. 42. ZOOM Button [DVD P.42] Enlarges part of a DVD-reproduced image. 43. MUTE button Mutes the sound. Press it again to resume sound. 44. SLEEP button [TV/VCR P.34] Sets the Sleep Timer. (See page 34.) 45. SELECT button Press to switch TV/VCR and DVD mode. You can see the mode (TV/VCR or DVD) on the front panel indicator. EN 1C29 Display the counter or the current channel number and current time on the TV screen. DVD Mode:[P.43] Displays the current status on the TV screen for checking purposes. 28. SETUP button [TV/VCR P.15] Press to enter or exit the TV menu or DVD setup mode. 29. TITLE button [DVD P.37] Displays the title menu. - 10 - 46. ANT. in jack Connect to an antenna, cable system, or satellite system. 47. Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. 48. COAXIAL digital audio out jack Connect to the digital input of an external amplifier or decoder. 49. AUDIO L/R output jack Connect to the analog audio input of an external amplifier or decoder. PREPARATION FOR USE ANTENNA/CABLE CONNECTION Satellite Box or Cable Box (Not supplied) OUT IN VHF/UHF Antenna (Not supplied) From Cable System or Satellite Dish VHF Antenna (Not supplied) From Cable System 75-ohm Coaxial Cable (Not supplied) ANT. UHF Antenna (Not supplied) or 1 L AUDIO OUT R COAXIAL VHF/UHF Combiner (Not supplied) 75-ohm Coaxial Cable (Not supplied) ANT. or [Fig. 4] or Flat twin-lead cable VHF/UHF SEPARATE ANTENNAS In some areas it will be necessary to use an outdoor antenna. CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the ilustration. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/DVD/VHS Remote Control. Unattended timer recording is limited to one channel at a time. Antenna/Cable Connections Continued on the Next Page. CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX Use this connection if your cable system connects directly to your TV/DVD/VHS without a converter box. By using this connection you can: 1) Use the TV/DVD/VHS remote to select channels. 2) Program one or more unscrambled channels for Automatic Timer Recording. NOTE: This unit will ONLY record and view the same channel. - 11 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TV/DVD/VHS channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover. CONNECTIONS TO FRONT A/V JACKS When you watch a program recorded on an another source (VCR or video camera), use the audio/video input jacks on the front of the TV/DVD/VHS. Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/DVD/VHS. Then press the CHANNEL K/L buttons until "AUX" appears on the screen. You may access the front A/V Input directly by pressing the numbers 00 on the remote control. See page 9. NOTE: · When you connect a monaural VCR (another source) to this TV/DVD/VHS, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this TV/DVD/VHS. The audio will output in both L and R channel equally. To the audio output jacks [Another source] HEADPHONE VIDEO L-AUDIO-R Audio/Video coaxial cable (not supplied) etc. To the video output jack [Front of the TV/DVD/VHS] [Fig. 5] - 12 - EN 1C29 CONNECTING TV/DVD/VHS TO AUDIO SYSTEM SAFETY NOTES: Please turn of the power to all components before making any connections and refer to the owners manual of the audio system for further installation and operational instructions. ANALOG CONNECTION: · The analog connection will allow you to take 2 channel stereo sound from the TV/DVD/VCR (or any source plugged into the front of the TV) and sends the audio signal to an external audio system for amplification. ANT. 1 L AUDIO OUT R COAXIAL Stereo system To ANALOG AUDIO INPUT jacks To Right (red) and Left (white) AUDIO OUT jacks [Fig. 6] · Using industry standard audio patch cords, connect one end to the Audio Output Left (white) and Right (red) jacks on the rear of the TV/DVD/VCR, and the other end to the audio input Left (white) and Right (red) on the audio system. DIGITAL CONNECTION: DVD SOUND ONLY · If your audio system features a COAXIAL Digital Audio Input jack and Dolby Digital/DTS multi channel audio decoders, you may take full advantage of the multi channel surround sound capability of DVD discs. ANT. 1 L AUDIO OUT R COAXIAL Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. To COAXIAL DIGITAL AUDIO INPUT jack To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack (only DVD AUDIO OUT) · [Fig. 7] Using industry standard audio patch cords, connect one end to the Coaxial Digital Audio Out jack on the rear of the TV/DVD/VCR and the other to the Coaxial Digital Input on the audio system. Then select the Coaxial Digital Audio Input on the Audio System to listen to multichannel (5.1) DVD sound. ANALOG AND DIGITAL CONNECTIONS: IMPORTANT NOTES: If you use the COAXIAL Digital audio connection for digital multi channel DVD sound, you must also make the Analog connection to listen to TV/DVD/VCR (2 channel) and any source plugged into the front A/V input jack. To COAXIAL DIGITAL AUDIO input Stereo system To DIGITAL AUDIO OUT COAXIAL JACK L AUDIO OUT R COAXIAL ANT. 1 To ANALOG AUDIO INPUT jacks To Right (red) and Left (white) AUDIO OUT jacks [Fig. 7] SELECTING ANALOG AND DIGITAL AUDIO SOUNDTRACKS: · To listen to digital multi channel DVD audio, please select the Coaxial Digital Audio input on the audio system. · To listen to analog audio from TV/DVD/VCR (and any source plugged into the front of the A/V input jack), please select the analog input which you connected the left and right audio jacks. · For further solutions on selecting analog and digital audio inputs, please refer to your audio systems owners manual. - 13 EN 1C29 CONNECTING TO A DOLBY DIGITAL DECODER, DTS DECODER, OR MPEG DECODER (for DVD) If using this TV/DVD/VHS to play back a TV/DVD/VHS in a 5.1 channel Dolby Digital surround, DTS surround, or MPEG surround format, the TV/DVD/VHS outputs a Dolby Digital, DTS, or MPEG data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters. Use an audio coaxial digital cables (not included) for the audio connections. Front speaker (left) Center speaker Front speaker (right) ANT. 1 L AUDIO OUT R COAXIAL Dolby Digital or DTS decoder To COAXIAL DIGITAL AUDIO INPUT jack Surround speaker (right) Subwoofer Center Center speaker for speaker for MPEG (right) MPEG (left) To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack Surround speaker (left) [Fig. 8] NOTES: · Be sure to turn off the power to all components in the system before connecting another component. · Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VHS. · If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio output in the setup mode. · If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. · If played a disc indicated MPEG audio, connect to a MPEG decoder, and set MPEG to ON for audio output in the setup mode. · Unless connected to a Dolby Digital decoder, a DTS decoder, or a MPEG decoder, set Dolby Digital, DTS, or MPEG to off for audio output in the setup mode. Playing a TV/DVD/VHS using incorrect settings may generate noise distortion, and may also damage the speakers. · When Dolby Digital is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted. - 14 - EN 1C29 TV/VCR SECTION SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box. CHANNEL SET UP FOR THE FIRST TIME 1 Plug in the TV/DVD/VHS power cord DELETING (OR ADDING) CHANNEL The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) Plug the TV/DVD/VHS power cord into a standard AC outlet. NOTE: · If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 1 Select "CHANNEL SET UP" 2 3 Turn on the TV/DVD/VHS Press the POWER button to turn on the TV/DVD/VHS. Select "ENGLISH" or "ESPAÑOL" or ­ SET UP ­ B LANGUAGE [ENGLISH] ESP AUTO PRESET Press the SETUP button on the remote control. Press the Arrow K or L button to point to "CHANNEL SET UP". Then, press the Arrow B button. - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK B CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 2 Select "ADD/DELETE CH" ­ CHANNEL SET UP ­ B ADD / DELETE CH (TV) AUTO PRESET "FRANÇAIS" Select "ENGLISH" or "ESPAÑOL"=Spanish or "FRANÇAIS" =French using the Arrow B or s button. "[ ]" indicate the selected language. FRA Press the Arrow K or L button to point to "ADD/DELETE CH". Press the Arrow B button. 3 ­ SET UP ­ Enter the desired channel number 4 Begin auto preset LANGUAGE [ENGLISH] ESP FRA Press the Arrow K or L button to point to "AUTO PRESET". Then press the Arrow B button. The tuner scans and memorizes all active channels in your area. NOTES: · The TV/DVD/VHS distinguishes between standard TV channels and cable channels. · If you want to play or record a video tape BEFORE presetting the tuner, you must press the SETUP button on the remote control. To preset the tuner again, see "CHANNEL SET UP AGAIN" on page 16. · The TV/DVD/VHS may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO MEMO action again when reception conditions are better. B AUTO PRESET Press the Arrow K or L button until your desired channel number appears. (You can also use the number buttons or the CHANNEL K/L button to enter it) (Example: CH8) 08 ADD / DELETE 4 Delete (or add) it from (into) memory Press the Arrow B or s button. The channel number changes to light red. The channel is deleted from memory. · To delete another channel, repeat steps [3] and [4]. · If you press the Arrow B or s button again, the channel is memorized again. 5 Exit the channel setup mode 5 After scanning The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L. Added channel: Light blue. Deleted channel: Light red. Press the SETUP button on the remote control to returns to TV mode. NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button. - 15 - EN 1C29 CHANNEL SET UP AGAIN Make sure ... · Press the POWER button to turn on the TV/DVD/VHS. NOTE: If Spanish or French is selected accidentally, press the SETUP button on the remote control, press the Arrow K button to point to "IDIOMA [ESPAÑOL]" or "LANGAGE" [FRANÇAIS], then press the Arrow B button, then press the SETUP button on the remote control. 1 Select "CHANNEL SET UP" Press the SETUP button on the remote control. Press the Arrow K or L button to point to "CHANNEL SET UP". Then, press the Arrow B button. - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK B CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH DAYLIGHT-SAVING TIME Select this feature and the TV/DVD/VHS's clock automatically will advance one hour in April, then reverse one hour in October. When Daylight-Saving Time is ON, the clock will change automatically as follows: · First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record. · Last Sunday of October : At 2 AM the clock immediately changes to 1 AM. Make sure ... · Press the POWER button to turn on the TV/DVD/VHS. 2 Begin auto preset ­ CHANNEL SET UP ­ ADD / DELETE CH (TV) B AUTO PRESET Press the Arrow K or L button to point to "AUTO PRESET". Then, press the Arrow B button. The tuner scans and memorizes all the active channels in your area. 3 After scanning The tuner stops on the lowest memorized channel. 1 Select "SETTING CLOCK" - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH SELECTING THE LANGUAGE Make sure ... · Press the POWER button to turn on the TV/DVD/VHS. NOTE: This function effects only the language on the screen menu and not the audio source. Press the SETUP button on the remote control. Press the Arrow K or L button to point to "SETTING CLOCK". Then, press the Arrow B button. 2 Set "D.S.T." (Daylight-Saving Time) to [ON] ­ SETTING CLOCK ­ AUTO CLOCK AUTO CLOCK CH MANUAL CLOCK SET B D.S.T. [ON] [ON] [AUTO] 1 Select "LANGUAGE" - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP B LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH Press the SETUP button on the remote control. Press the Arrow K or L button to point to "LANGUAGE". Press the Arrow K or L button to point to "D.S.T.". Then, press the Arrow B or s button until [ON] appears. 3 Select "ENGLISH" or "ESPAÑOL" or "FRANÇAIS" Exit the Daylight-Saving Time mode 2 Press the SETUP button on the remote control to return to TV mode. Select "ENGLISH" or "ESPAÑOL"= Spanish or "FRANÇAIS"= French using the Arrow B or s button. TO CANCEL THE DAYLIGHT-SAVING TIME Repeat steps [1] to [2], select [OFF] using the Arrow B or s button. 3 Exit the Language mode Press the SETUP button on the remote control to return to TV mode. - 16 - EN 1C29 CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow "AUTO CLOCK SETTING". If it is not, follow "MANUAL CLOCK SETTING". 2 Set "AUTO CLOCK" to [ON] ­ SETTING CLOCK ­ B AUTO CLOCK AUTO CLOCK CH MANUAL CLOCK SET D.S.T. [OFF] [ON] [AUTO] Press the Arrow B or s button repeatedly until [ON] appears. 3 Enter the channel number for the PBS station ­ SETTING CLOCK ­ AUTO CLOCK SETTING You can have the TV/DVD/VHS set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/DVD/VHS will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS). Make sure ... · TV/DVD/VHS power must be turned on. · Confirm that the antenna connections are correct. · The cable converter box must be turned on if your TV/DVD/VHS is connected directly to it. (See NOTES:) · The channel is properly set in advance. (See page 16.) NOTES: · Auto clock setting only needs to be set once. But it can be done again if the clock's time has become incorrect for some reason. · If the TV/DVD/VHS is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/DVD/VHS must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically. If you do not know what your local PBS station is, then follow "Manual Clock Settings" on page 18. The TV/DVD/VHS cannot control the channels of the cable converter box or satellite box. Press the Arrow K or L button to point to "AUTO CLOCK CH". Then press the Arrow B or s button until the channel number for your local PBS station appears. If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/DVD/VHS will search automatically all available channels for the local PBS station, and will select that channel. AUTO CLOCK [ON] AUTO CLOCK CH [AUTO] MANUAL CLOCK SET B D.S.T. [OFF] 4 Exit the Auto Clock Setting Press the SETUP button on the remote control to return to TV mode. 5 Turn off the TV/DVD/VHS Turn the TV/DVD/VHS off. Because the Auto Clock functions automatically while the TV/DVD/VHS is off. If you choose [AUTO], · the TV/DVD/VHS must search until the PBS channel is found. It must scan each channel for a couple of seconds to determine if that channel is transmitting the XDS signal. · if the time, that is automatically set by this selected PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto Clock Setting feature. 1 Select "SETTING CLOCK" - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH Press the SETUP button on the remote control. Press the Arrow K or L button to point to "SETTING CLOCK". Then, press the Arrow B button. - 17 - EN 1C29 MANUAL CLOCK SETTING Make sure ... · TV/DVD/VHS power must be turned on. In the example below, the clock is to be set to: DATE May 7th, 2002 SETTING TIME 5:40PM 1 Select "SETTING CLOCK" - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 6 Select the hour ­ MANUAL CLOCK SET ­ MONTH DAY 05 / 07 HOUR TUE YEAR 2002 Press the SETUP button on the remote control. Press the Arrow K or L button to point to "SETTING CLOCK". Then, press the Arrow B button. Press the Arrow K or L button until your desired hour appears. (Example: 5, PM) Then, press the Arrow B button. MINUTE PM 05 : ­­ 7 2 Select "MANUAL CLOCK ­ SETTING CLOCK ­ AUTO CLOCK AUTO CLOCK CH [ON] [AUTO] Select the minute ­ MANUAL CLOCK SET ­ MONTH DAY 05 / 07 HOUR TUE YEAR 2002 SET" Press the Arrow K or L button to point to "MANUAL CLOCK SET". Then, press the Arrow B button. Press the Arrow K or L button until the desired minute appears. (Example: 40) MINUTE PM 05 : 40 B MANUAL CLOCK SET D.S.T. [OFF] 8 ­ MANUAL CLOCK SET ­ MONTH DAY 05 / ­­ HOUR YEAR ­­­ ­­­­ Start the clock 5:40 PM 3 Select the month Press the Arrow K or L button until your desired month appears. (Example: May 05) Then, press the Arrow B button. MINUTE ­­ ­­ : ­­ 4 Select the day ­ MANUAL CLOCK SET ­ MONTH DAY 05 / 07 HOUR YEAR ­­­ ­­­­ Press the Arrow K or L button until your desired day appears. (Example: 7th 07) Then, press the Arrow B button. Press the SETUP button on the remote control. Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock. MINUTE ­­ ­­ : ­­ TO CHANGE CLOCK SETTING ­ MANUAL CLOCK SET ­ MONTH DAY 05 / 07 HOUR TUE YEAR 2002 5 Select the year Press the Arrow K or L button until your desired year appears. (Example: 2002) Then, press the Arrow B button. MINUTE ­­ ­­ : ­­ If you want to change the clock, 1)Follow steps [1] and [2]. 2)Select where you want to change using the Arrow B or s button. 3)Enter correct numbers using the Arrow K or L button. 4)Press the SETUP button on the remote control to start the clock. PLEASE NOTE: If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and press the Arrow B or s button to turn [OFF] this function. Then you can manually adjust the clock. - 18 - EN 1C29 TV OPERATION WATCHING A TV PROGRAM 1 Turn on the TV/DVD/VHS PICTURE CONTROL The TV/DVD/VHS's picture controls ­ BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS ­ are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image. NOTES: · Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled. · When setting the Picture Control, the Game mode will be cancelled. Make sure ... · TV/DVD/VHS power must be turned on. Press the POWER button to turn on the TV/DVD/VHS. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/DVD/VHS is connected to a cable box or satellite box, the TV/DVD/VHS must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box. 3 Adjust sound 1 Select "PICTURE CONTROL" Press the VOLUME X or Y button to adjust the volume. VOLUME 20 Press the PICTURE button on the remote control. C C C C C CCCCCCC 2 Select item you want to adjust NOTES: · If you press the CHANNEL o or p in the DVD mode, you can change the TV channels. Even if you turn off the TV/DVD/VHS in the DVD mode, when you turn it on again, it will go into the TV/VCR mode. Press the Arrow K or L button until desired control is displayed. BRIGHT CONTRAST COLOR TINT SHARPNESS BRIGHT ­PPPPPPPCPPPPPPP+ 3 Adjust the picture control Press the Arrow B or s button to adjust to your desired level. Arrow s to decrease brightness to decrease contrast to pale to purple to soft Arrow B to increase brightness to increase contrast to brilliant to green to clear BRIGHT CONTRAST COLOR TINT SHARPNESS · If there is a power failure of any kind, the unit will retain its memory for this feature. - 19 -