User manual SYMPHONIC SC519DD

OWNER'S MANUAL COLOR TV/DVD SC519DD (19 inch) This Owner's Manual is made of recycled paper. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-968-3429. Or visit our WEB SITE at http://www.funai-corp.com Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1.Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions-The safety and operating instructions should be retained for future reference. 3.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions-All operating and use instructions should be followed. 5.Cleaning-Unplug TV/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6.Attachments-Do not use attachments not recommended by the TV/DVD manufacturer as they may cause hazards. 7.Water and Moisture-Do not use this TV/DVD near waterfor example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8.Accessories-Do not place this TV/DVD on an unstable cart, stand, tripod, bracket, or table. The TV/DVD may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/DVD. Any mounting of the PORTABLE CART WARNING AVERTISSEMENT POUR UNE appliance should follow the manuTABLE ROULANTE PORTATIVE facturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appli- S3126A ance and cart combination to overturn. Accessoires- Ne placez pas cette TV/DVD sur une table roulante, un support, un trépied, une console ou une table instable. Cette TV/DVD risquerait de tomber, pouvant gravement blesser quelqu'un et l'appareil même pourrait être sérieusement endommagé. N'utilisez qu'une table roulante, un support, un trépied, une console ou une table recommandé par le fabriquant, ou vendu avec la TV/DVD. Pour n'importe quelle installation de l'appareil, on devra suivre les instructions du fabriquant et l'on devra utiliser les accessoires d'installation recommandés par le fabriquant. L'ensemble combiné de l'appareil avec une table roulante devra être déplacé avec précaution. Des arrêts brusques, une force excessive et des surfaces inégales peuvent provoquer le renversement de l'ensemble combiné de l'appareil/table roulante. 9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/DVD and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/DVD on a bed, sofa, rug, or other similar surface. This TV/DVD should never be placed near or over a radiator or heat register. This TV/DVD should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10.Power Sources-This TV/DVD should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/DVDs intended to operate from battery power, or other sources, refer to the operating instructions. 11.Grounding or Polarization-This TV/DVD is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. ­2­ EN 0C28 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14.Lightning-For added protection for this TV/DVD receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/DVD due to lightning and power-line surges. 15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17.Object and Liquid Entry-Never push objects of any kind into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD. 18.Servicing-Do not attempt to service this TV/DVD yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19.Damage Requiring Service-Unplug this TV/DVD from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV/DVD. c. If the TV/DVD has been exposed to rain or water. d. If the TV/DVD does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/DVD to its normal operation. e. If the TV/DVD has been dropped or damaged in any way. f. When the TV/DVD exhibits a distinct change in performance-this indicates a need for service. 20.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21.Safety Check-Upon completion of any service or repairs to this TV/DVD, ask the service technician to perform routine safety checks to determine that the TV/DVD is in proper operating condition. 22.Heat-This TV/DVD product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. ­3­ EN 0C28 PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file. Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No. ­4­ EN 0C28 LOCATION For safe operation and satisfactory performance of your TV/DVD, keep the following in mind when selecting a place for its installation: · Shield it from direct sunlight and keep it away from sources of intense heat. · Avoid dusty or humid places. · Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. · Install unit in a horizontal position. · Avoid locations subject to strong vibration. · Do not place the TV/DVD near strong magnetic fields. · Avoid moving TV/DVD to locations where temperature differences are extreme. SUPPLIED ACCESSORY · Remote Control Unit (PART NO./ NE207UD) · 2 AA Batteries · Owner's Manual (PART NO./ 0EMN02263) Owner's Manual SYMBOLS USED IN THIS MANUAL The following symbols below appear in some headings and notes in this manual, with the following meanings AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE · Do not handle the power cord with wet hands. · Do not pull on the power cord when disconnecting · · · it from an AC wall outlet. Grasp it by the plug. If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. Do not put your fingers or objects into the TV/DVD disc loading tray. Do not place anything directly on top of the unit. TV : Description refers to TV operation (in the TV mode). DVD-V : Description refers to playback of DVD video discs (in the DVD mode). CD : Description refers to playback of audio CDs (in the DVD mode). MP3 : Description refers to playback of MP3 discs (in the DVD mode). WARNING Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a DVD is played in a TV/DVD which has moisture, it may damage the DVD and TV/DVD. Therefore when the condensation occurs inside the unit, turn POWER on and allow at least 2 hours for the unit to dry out. QUICK : Description refers to the items to be set by the QUICK mode (in the DVD mode). ­5­ EN 0C28 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 C OPERATING CONTROLS AND FUNCTIONS . . .8 INSTALLING THE BATTERIES . . . . . . . . . . .9 C PREPARATION FOR USE . . . . . . . . . . . . . . .10 ANTENNA/CABLE CONNECTIONS . . . . . . .10 CONNECTING TO EXTERNAL INPUT JACKS .11 CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS, MD DECK OR DAT DECK (for DVD only) . .11 CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) . . . . . . . . . . . . . . . . . . .12 TV SECTION C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .13 CHANNEL SET UP FOR THE FIRST TIME . .13 DELETING (OR ADDING) CHANNEL . . . . .13 CHANNEL SET UP AGAIN . . . . . . . . . . . . . .14 SELECTING THE LANGUAGE . . . . . . . . . . .14 C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .15 WATCHING A TV PROGRAM . . . . . . . . . . . .15 DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .15 PICTURE CONTROL . . . . . . . . . . . . . . . . . . .15 SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .16 CLOSED CAPTION SYSTEM . . . . . . . . . . . .16 V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .17 DVD SECTION C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .19 PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .19 DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .19 C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .20 BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .20 GENERAL FEATURES . . . . . . . . . . . . . . . . . .20 DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .20 TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .20 RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 STEP BY STEP PLAYBACK . . . . . . . . . . . . .21 FAST FORWARD/REVERSE SEARCH . . . . .21 SLOW FORWARD / SLOW REVERSE . . . . .21 ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .22 TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .22 TITLE / CHAPTER SEARCH . . . . . . . . . . . . .22 TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .22 MARKER SETUP SCREEN . . . . . . . . . . . . . .22 C SPECIAL PLAYBACK FUNCTION . . . . . . . .23 REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23 RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23 C PLAYING A MP3 DISC . . . . . . . . . . . . . . . . . .24 MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . .24 TRACK SELECTION . . . . . . . . . . . . . . . . . . .24 PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .24 RANDOM PLAYBACK . . . . . . . . . . . . . . . . .24 C CHANGING THE SETTINGS . . . . . . . . . . . .25 SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .25 AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .25 STEREO SOUND MODE . . . . . . . . . . . . . . . .25 CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .25 BLACK LEVEL SETTING . . . . . . . . . . . . . . .25 VIRTUAL SURROUND . . . . . . . . . . . . . . . . .25 C THE ON-SCREEN INFORMATION . . . . . . .26 C CHANGING THE DVD SETUP ITEMS . . . .27 LANGUAGE SETTING . . . . . . . . . . . . . . . . .27 DISPLAY SETTING . . . . . . . . . . . . . . . . . . . .28 AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .28 PARENTAL CONTROL . . . . . . . . . . . . . . . . .29 C TROUBLESHOOTING GUIDE . . . . . . . . . . .30 C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .32 DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .32 C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .33 C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover ­6­ EN 0C28 FEATURES TV Mode DVD Mode ¡Dolby Digital sound · 181 channel capability PLL frequency synthesizer tuner with direct station call (A converter may be necessary to view scrambled cable channels.) This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder. ¡Still/fast/slow/step playback · Infrared remote control · Trilingual on screen menu display selectable in English, Spanish, or French ¡Sleep Timer Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames. ¡Random playback for audio CD and MP3 The Sleep Timer function enables you to shut off the power without pressing POWER after a desired time period. ¡Closed Caption Decoder This player can shuffle the order of tracks to play them in random order. ¡Program playback for audio CD and MP3 You may view specially labeled (cc) TV programs, movies, news, etc. with either a dialogue caption or text display added to the program. ¡Auto Shut Off Function You can program the order of tracks to play them in any desired order. ¡DVD menus in a desired language You can display DVD menus in a desired language, if available on a DVD. ¡Screen saver/Auto power-off functions If there is no air signal input from the antenna terminal and no operation for 15 minutes, the TV will turn itself off automatically. ¡V-CHIP Enables parents to prevent their children from watching inappropriate material on TV. The screen saver program starts when there is no input from the player for five minutes in the stop mode. When the screen saver program is activated for 15 minutes, the power is automatically turned off. ¡Subtitles in a desired language You can select a desired language for the display subtitles, if that language is available on a disc. ¡Selecting a camera angle You can select the desired camera angle, if a disc contains sequences recorded from different angles. ¡Choices for audio language and sound mode You can select the desired audio language and sound mode, if different languages and modes are available on a disc. ¡Parental lock You can set the control level to limit playback of discs which may not be suitable for children. ¡Automatic detection of discs This player automatically detects if the loaded disc is DVD, audio CD or MP3 on disc. ¡On-screen display Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control. ¡Search Chapter search / Title search / Track search / Time search ¡Repeat Chapter / Title / Track / Group / All / A-B ¡Zoom Magnified screen can be displayed. ¡Marker The part designated by user can be called back. ¡Resume Play User can resume to playback from the part at which the play was stopped. ¡Virtual Surround ¡Bit rate indication ¡DRC (Dynamic range control) ­7­ You can control the range of sound volume. EN 0C28 OPERATING CONTROLS AND FUNCTIONS TV/DVD FRONT PANEL [Fig. 1] VIDEO L AUDIO R POWER VOLUME CHANNEL STOP SKIP PLAY SKIP PAUSE OPEN/CLOSE HEADPHONE SEARCH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 REMOTE CONTROL [Fig. 2] 8. STOP Button [page 20] Stops operation of the disc. 4 36 16 13 34 6 9. SKIP H Button [page 22] Plays back from the beginning of the current chapter or track. SEARCH (REV) E Button (Front Panel) [page 21] During playback or in the pause mode, press and hold button down for a few seconds to change reverse playback speed. 10. PLAY Button [page 20] Starts playback of the disc contents. Press to change to DVD mode when TV mode. 17 9 11 10 5 35 19 18 8 12 23 20 21 22 15 24 25 33 32 31 30 29 28 27 26 11. SKIP G Button [page 22] Plays back from the beginning of the next chapter or track. SEARCH (FWD) D Button (Front Panel) [page 21] During playback or in the pause mode, press and hold button down for a few seconds to change forward playback speed. 12. PAUSE Button [page 21] Pauses the current disc operation. 13. OPEN/CLOSE Button [page 20] Press to insert discs into or remove them from the tray. 14. HEADPHONE Jack To connect headphone (not supplied) for personal listening. 15. MODE Button [pages 23-25] Activates program playback or random playback mode when playing CDs or MP3. 16. Number Button TV Mode: [page 15] Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel. +100 Button­ Press to select cable channels which are equal or greater than number 100. DVD Mode: [page 22] Press to enter the desired number. +10 Button­ Press to enter the desired numbers which are equal or greater than number 10. 1. Disc loading tray 2. VIDEO input Jack [page 11] Connect to the video output jack of a video camera or VCR. 3. AUDIO L/R input Jacks [page 11] Connect to the audio output jacks of a video camera or VCR. 4. POWER Button [page 13] Press to turn the power on and off. 5. VOLUME K/L (VOL. m/n) Buttons Press to control the volume level for the DVD and TV. 6. CHANNEL K/L (CH. K/L) Buttons [page 13] Press to select memorized channel. Press to change to TV mode when DVD mode. 7. Remote Sensor Window ­8­ EN 0C28 TV/DVD REAR VIEW [Fig. 3] 37 38 39 17. SLEEP Button [page 16] Press SLEEP to display the sleep timer and start the function. The shut off time can be determined by the number of times you press this button. (0, 30, 60, 90, or 120 minutes) 18. REV h Button [page 21] Press to view the DVD picture in fast reverse motion. Press PAUSE, then press this button to begin slow motion playback. Press this button repeatedly to change the reverse speed of slow motion. FWD g Button [page 21] Press to fast forward the Disc. Press PAUSE, then press this button to begin slow motion playback. Press this button repeatedly to change the forward speed of slow motion. 19. ZOOM Button [page 21] Expands the picture to fill the entire screen. 20. SETUP Button [pages 13,27-29] Press to enter or exit the TV menu or DVD setup mode. 21. TITLE Button [page 20] Displays the title menu. 22. CLEAR Button [pages 22-24] Resets a setting. 23. DISPLAY Button TV Mode: Press to display the channel number on the screen. If you press it again, the channel number will disappear. DVD Mode: [page 26] Displays the current status on the TV screen for checking purposes. 24. SEARCH MODE Button [page 22] Press to locate a desired point. 25. AUDIO Button [page 25] Press to select a desired audio language or sound mode. 26. SUBTITLE Button [page 25] Press to select a desired subtitle language. 27. REPEAT Button [page 23] Repeats playback of the current disc, title, chapter or track. 28. ANGLE Button [page 25] Press to change the camera angle to see the sequence being played back from a different angle. 29. REPEAT A-B Button [page 23] Repeats playback of a selected section. 30. RETURN Button [page 25] Returns to the previous operation in the DVD setup mode. 31. ENTER Button [pages 13, 20] Press to accept a setting. 32. Arrow Buttons TV Mode: [page 13] Press to select a setting mode from the menu on the TV screen. Press to select or adjust from a particular menu. DVD Mode: [page 20] Use when making settings while watching the display on a TV screen. 33. DISC MENU Button [page 20] Displays the menus in the DVD. 34. SELECT Button [pages 11, 20] Press to change to TV mode, external input mode or DVD mode. NOTE: When you select the DVD mode by this button, press PLAY or OPEN/CLOSE first. Otherwise, the DVD features are not operated. 35. MUTE Button Press MUTE to turn off the sound portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press MUTE again or press VOL. m or n to restore sound. 36. PICTURE Button [page 15] Press to enter picture adjustment mode. 37. Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. 38. COAXIAL digital audio out Jack (DVD Audio Only) Connect to the digital input of an external amplifier or decoder. 39. ANT. in Jack Connect to an antenna, cable system, or satellite system. INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover. NOTES ¡Do not mix alkaline and manganese batteries. ¡Do not mix old and new batteries. ­9­ EN 0C28 PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Satellite Box or OUT Cable Box (Not supplied) IN From Cable System or Satellite Dish VHF/UHF Antenna (Not supplied) VHF Antenna (Not supplied) From Cable System VHF/UHF UHF Antenna (Not supplied) or Combiner or 75-ohm Coaxial Cable (Not supplied) ANT. (Not supplied) or Flat twin-lead cable [Fig. 4] Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. NOTE: Before plugging the an antenna into the ANT. IN jack of the TV/DVD, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT. IN jack of the TV/DVD. Bent pin Cable Plug (Needs to be straightened)(Straight pin) VHF/UHF COMBINED ANTENNA A VHF UHF 75 ohm combination antenna can be connected to ANT terminal. CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here. Channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/ DVD Remote Control. TO VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL 1.Set the TV/DVD channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to view at your Cable Converter Box or Satellite Box. VHF/UHF SEPARATE ANTENNAS In some areas it will be necessary to use an outdoor antenna. CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX Use this connection if your cable system connects directly to your TV/DVD without a converter box. Use the TV/ DVD Remote Control to select channels. ­ 10 ­ EN 0C28 CONNECTING TO EXTERNAL INPUT JACKS When you watch a program recorded on an another source (VCR or video camera), use the audio/video input jacks on the front of the TV/DVD. Connect the audio/video output jacks of another source to the AUX AUDIO L/R and VIDEO jacks of this TV/DVD. Then press SELECT until "AUX" appears on the screen. NOTE: · When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this TV/DVD. The audio will output in both L and R channel equally. [Front of the TV/DVD] VIDEO L AUDIO R POWER [Another source] To the audio output jacks Audio/Video cables (not supplied) etc. To the video output jack VIDEO L AUDIO R [Fig. 6] CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS, MD DECK OR DAT DECK (for DVD only) Use an audio coaxial digital cable available at retail for the audio connections. Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. To COAXIAL DIGITAL AUDIO INPUT jack To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack (only DVD AUDIO OUT) [Fig. 8] NOTES: · The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck. · Be sure to turn off the power to all components in the system before connecting another component. · Refer to the Owner's Manuals for the components to be connected to the TV/DVD. · Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 28 to set DOLBY DIGITAL to OFF.) ­ 11 ­ EN 0C28 CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables available at retail for the audio connections. Front speaker (left) Center speaker Front speaker (right) Dolby Digital decoder To COAXIAL DIGITAL AUDIO INPUT jack Surround speaker (right) Subwoofer To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack Surround speaker (left) [Fig. 9] NOTES: · Be sure to turn off the power to all components in the system before connecting another component. · Refer to the Owner's Manuals for the components to be connected to the TV/DVD. · If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 28 to set DOLBY DIGITAL to ON.) · Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. ­ 12 ­ EN 0C28 TV SECTION SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box. CHANNEL SET UP FOR THE FIRST TIME TV DELETING (OR ADDING) CHANNEL TV The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) 1 Plug in the TV/DVD power cord Plug the TV/DVD power cord into a standard AC outlet. NOTE: · If some digits appear in the corner of the screen, press POWER without unplugging the power cord. 1 Select "CHANNEL SET UP" - TV SETUP - 2 3 Turn on the TV/DVD Press SETUP on the remote control. Press K or L to point to "CHANNEL SET UP". Then, press ENTER. B CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] Press POWER to turn on the TV/DVD. 2 Select the On Screen Language ­ SET UP ­ B LANGUAGE [ENGLISH] ESP AUTO PRESET FRA Select "ADD/DELETE CH" ­ CHANNEL SET UP ­ B ADD / DELETE CH (TV) AUTO PRESET Press K or L to point to "LANGUAGE". Then, press ENTER to select "ENGLISH" or "ESP"=Spanish or "FRA" =French. "[ ]" indicate the selected language. Press K or L to point to "ADD/DELETE CH". Then, press ENTER. 3 Enter the desired channel number 4 Begin auto preset ­ SET UP ­ LANGUAGE [ENGLISH] ESP Press K or L to point to "AUTO PRESET". Then, press ENTER. The tuner scans and memorizes all active channels in your area. NOTES: · The TV/DVD distinguishes between standard TV channels and cable(CATV) channels. · The TV/DVD may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO PRESET action again when reception conditions are better. See "CHANNEL SET UP AGAIN" on page 14. FRA B AUTO PRESET Press K or L until your desired channel number appears. (You can also use Number or CH. K/L to enter it.) (Example: CH8) 08 ADD / DELETE 4 Delete (or add) it from (into) memory Press ENTER. The channel number changes to light red. The channel is deleted from memory. Added channel: Light blue. Deleted channel: Light red. · To delete another channel, repeat steps [3] and [4]. · If you press ENTER again, the channel is memorized again. 5 After scanning The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with Number or CHANNEL(CH.) K or L. 5 Exit the channel setup mode Press SETUP on the remote control to returns to TV mode. NOTE: To confirm that channel(s) has been deleted or added, press CHANNEL(CH.) K or L. ­ 13 ­ EN 0C28 CHANNEL SET UP AGAIN TV 1 Select "CHANNEL SET UP" - TV SETUP - Press SETUP on the remote control. Press K or L to point to "CHANNEL SET UP". Then, press ENTER. B CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] 2 Begin auto preset ­ CHANNEL SET UP ­ ADD / DELETE CH (TV) Press K or L to point to "AUTO PRESET". Then, press ENTER. The tuner scans and memorizes all the active channels in your area. NOTES: · The TV/DVD distinguishes between standard TV channels and cable(CATV) channels. · The TV/DVD may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO PRESET action again when reception conditions are better. B AUTO PRESET 3 After scanning The tuner stops on the lowest memorized channel. SELECTING THE LANGUAGE TV NOTE: This function effects only the language on the screen menu and not the audio source. 1 Select "LANGUAGE" - TV SETUP - Press SETUP on the remote control. Press K or L to point to "LANGUAGE". Then, press ENTER to select "ENGLISH" or "ESPAÑOL"= Spanish or "FRANÇAIS"= French. CHANNEL SET UP V-CHIP SET UP B LANGUAGE [ENGLISH] CAPTION [OFF] 2 Exit the Language mode Press SETUP on the remote control to return to TV mode. NOTE: If Spanish or French is selected accidentally, 1) Press SETUP on the remote control. 2) Press K or L to point to "IDIOMA [ESPAÑOL]" or "LANGAGE" [FRANÇAIS]. 3) Press ENTER to select your desired language. 4) Press SETUP to exit. ­ 14 ­ EN 0C28 TV OPERATION WATCHING A TV PROGRAM TV PICTURE CONTROL TV The TV/DVD's picture controls ­ BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS ­ are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image. Make sure ... · TV/DVD power must be turned on. 1 2 Turn on the TV/DVD Press POWER to turn on the TV/DVD. Select the channel number Press CHANNEL(CH.) K or L to select your desired channel number or press Number on the remote control. Note for using the Number on the remote control: ¡When selecting cable channels which are higher than 99, press +100 first, then, press the last two digits. (Example: to select channel 125, first press "+100" then press "2" and "5"). ¡You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). Remember: ¡If the TV/DVD is connected to a cable box or satellite box, the TV/DVD must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box. 1 Select "PICTURE CONTROL" Press PICTURE on the remote control. 2 Select item you want to adjust Press K or L until desired control is displayed. BRIGHT CONTRAST COLOR TINT SHARPNESS BRIGHT ­PPPPPPPCPPPPPPP+ 3 Adjust sound Press VOLUME(VOL.) X or Y to adjust the volume. VOLUME 20 3 C CC C C C CCCCCCCCCC Adjust the picture control NOTE: · If you press the CHANNEL(CH.) o or p in the DVD mode, you can change the TV channels. Even if you turn off the TV/DVD in the DVD mode, when you turn it on again, it will go into the TV mode. Press B or s to adjust to your desired level within 5 seconds. NOTE: · At step 3, the picture adjustment display will disappear from the TV screen after about 5 seconds unless you press any buttons, even though you may not be finished. In this case, repeat from step [1]. DEGAUSSING Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes or so later. BRIGHT CONTRAST COLOR TINT SHARPNESS s to decrease brightness to decrease contrast to pale to purple to soft B to increase brightness to increase contrast to brilliant to green to clear · If there is a power failure of any kind, the unit will retain its memory for this feature. ­ 15 ­ EN 0C28 SLEEP TIMER TV The Sleep Timer function enables you to shut off the power without pressing POWER after a desired time period. NOTE: If the TV/DVD displays a black box on the TV screen, this means that the TV/DVD is set to the TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF]. Make sure ... · TV/DVD power must be turned on. 1 Set "SLEEP TIMER" Press SLEEP on the remote control. You may change the sleep time with pressing SLEEP on the remote control repeatedly. The timer is set up to 120 minutes, 30 minutes each time SLEEP is pressed. SLEEP 120 MINUTE 1 Select "CAPTION" - TV SETUP - To cancel the sleep timer: Press SLEEP repeatedly until "SLEEP 0 MINUTE" is displayed. NOTES: · When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost. · To view the time left for sleep timer press SLEEP once when SLEEP display disappears. After 10 seconds, display will disappear again. Press SETUP on the remote control. Press K or L to point to "CAPTION". CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] B CAPTION [OFF] 2 Select your desired caption menu - TV SETUP CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] B CAPTION [OFF] Press ENTER until your desired caption menu appears. ([CAPTION1], [CAPTION2], [TEXT1] or [TEXT2]) CLOSED CAPTION SYSTEM TV You can view specially labeled (cc) TV programs, movies, news, etc. with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want. 1-2: You may get these captions or text information by selecting either "1" or "2". Caption "2" is used, usually for a second language if available. NOTE: Not all programs are broadcast with closed captions. Your television is designed to provide error free closed captions from high quality antenna, cable and VCR signals. Conversely, poor quality signals are likely to result in caption errors or no captions at all. Common signal conditions which may cause captions errors are listed below: · Automobile ignition noise · Electric motor brush noise · Weak snowy reception on TV screen · Multiplex signal reception displaying picture ghosts or airplane flutter. 3 Exit the caption setting mode Press SETUP on the remote control to return to TV mode. TO CANCEL THE CLOSED CAPTION SYSTEM Repeat steps [1] and [2], select [OFF] using ENTER. Press SETUP on the remote control to return to TV mode. WHEN THE CLOSED CAPTION MODE IS ON The On-Screen Display will disappear after 5 seconds. · This is also true when MUTE is pressed. · If there is a power failure of any kind, the unit will retain its memory for this feature. ­ 16 ­ EN 0C28 V-CHIP SET UP TV V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets the limitations you select. In this case, "PROTECTED PROGRAM by ..." message appears on the TV screen. To block ratings, follow the steps below. · Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING). · When you select a rating category and turn it · [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. When you turn "TV-Y" to [VIEW], the all ratings will turn to [VIEW] automatically. Selection TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Rating Category Explanations Appropriate for all children Appropriate for children seven and older General Audience Parental Guidance suggested. Unsuitable for children under 14 Mature audience only TV RATING SET UP Make sure ... · TV/DVD power must be turned on. 1 Select "V-CHIP SET UP" - TV SETUP - Press SETUP on the remote control. Press K or L to point to "V-CHIP SET UP". Then, press ENTER. CHANNEL SET UP B V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] 2 Input Access code ACCESS CODE Press Number on the remote control to enter 4-digit access code. The default code is 0000. ____ 3 Select "TV RATING" ­ V-CHIP SET UP ­ B TV RATING MPAA RATING CHANGE CODE Press K or L to point to "TV RATING". Then, press ENTER. 4 Select your desired item B TV­Y TV­Y7 ( TV­G TV­PG ( TV­14 ( TV­MA ( ) ) ) ) [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press ENTER, the sub-ratings will appear on the TV screen. If you select the rating category (example: TV-PG) and turn it [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically. You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below. · When you select [TV-Y7]: Press L or K to select "FV" (Fantasy Violence). Then, press ENTER to select [BLOCK] or [VIEW]. · When you select [TV-PG], [TV-14] or [TV-MA]: Press L or K to select "D"(Suggestive Dialog), "L"(Coarse Language), "S"(Sexual Situation), or "V"(Violence). Then, press ENTER to select [BLOCK] or [VIEW]. NOTE: When you select [TV-MA], "D" does not appear on the TV screen. · The sub-ratings which set to [BLOCK] appears next to the rating category in the TV RATING menu. TV­Y7 [BLOCK] B FV [BLOCK] TV­PG [BLOCK] BD L S V [BLOCK] [BLOCK] [BLOCK] [BLOCK] B TV­Y TV­Y7 ( ) TV­G TV­PG (DLSV ) TV­14 (DLSV ) TV­MA ( LSV ) [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] Press K or L to point to your desired item. Then, press ENTER to select [BLOCK] or [VIEW]. 5 Exit the V-Chip setting mode Press SETUP on the remote control to return to original mode. ­ 17 ­ EN 0C28 MPAA RATING SET UP Make sure ... · TV/DVD power must be turned on. CHANGE ACCESS CODE To change access code, follow the steps. 1 1 Select "V-CHIP SET UP" - TV SETUP CHANNEL SET UP B V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] Select "V-CHIP SET UP" - TV SETUP CHANNEL SET UP B V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] Press SETUP on the remote control. Press K or L to point to "V-CHIP SET UP". Then, press ENTER. Press SETUP on the remote control. Press K or L to point to "V-CHIP SET UP". Then, press ENTER. 2 Enter 4-digit access code ACCESS CODE 2 Enter 4-digit access code ACCESS CODE Press Number on the remote control. The default code is 0000. ____ Press Number on the remote control. The default code is 0000. ____ 3 Select "MPAA RATING" ­ V-CHIP SET UP ­ TV RATING B MPAA RATING CHANGE CODE 3 Select "CHANGE CODE" ­ V-CHIP SET UP ­ TV RATING MPAA RATING B CHANGE CODE Press K or L to point to "MPAA RATING". Then, press ENTER. Press K or L to point to "CHANGE CODE". Then, press ENTER. 4 Selection G PG PG-13 R NC-17 X Rating Category Explanations General Audience Parental Guidance suggested. Unsuitable for children under 13 Restricted; under 17 requires accompanying parent or adult guardian No one under 17 admitted Mature audience only Enter 4-digit access code NEW CODE ____ Press Number to enter your desired access code in the NEW CODE space. Then, enter the same code in the CONFIRM CODE space. VCHIP SET UP screen appear on the screen. · If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space. CONFIRM CODE ____ 4 Select your desired item G PG PG­13 BR NC­17 X [VIEW] [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] 5 Exit the V-Chip setting mode Press K or L to point to your desired item. Then, press ENTER to select [BLOCK] or [VIEW]. · When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. · When you turn "G" to [VIEW], the all ratings will turn to [VIEW] automatically. Press SETUP on the remote control to return to original mode. NOTE: · If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary. 5