User manual SYMPHONIC WF719

OWNER'S MANUAL COLOR TV/DVD/VCR TRIPLE COMBO WF719 (19 inch) This Owner's Manual is made of recycled paper. SUPPLIED ACCESSORIES ACCESSORIES Batteries PART NO. 2 AA Batteries 0EMN02229 Remote Control Unit NE200UD INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. Owner 's Manual If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1-800-242-7158. Or visit our WEB SITE at http://www.funai-corp.com Please read before using this equipment WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1.Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions-The safety and operating instructions should be retained for future reference. 3.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions-All operating and use instructions should be followed. 5.Cleaning-Unplug TV/DVD/VCR from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6.Attachments-Do not use attachments not recommended by the TV/DVD/VCR manufacturer as they may cause hazards. 7.Water and Moisture-Do not use this TV/DVD/VCR near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8.Accessories-Do not place this TV/DVD/VCR on an unstable cart, stand, tripod, bracket, or table. The TV/DVD/VCR may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/DVD/VCR. Any mounting of PORTABLE CART WARNING the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care.Quick stops, excessive force, and uneven S3126A surfaces may cause the appliance and cart combination to overturn. AMEUBLES- Cet appareil ne doit SYMBOLE D'AVERTISSEMENT POUR LES être placé que sur un meuble (avec APPAREIL ETCOMPOSANTES MEUBLE A ROULETTES ou sans roulettes) recommandé par le fabricant. Si vous l'installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l'utilisation d'une force excessive et des surS3126A faces irrégulières risquent de déstabiliser l'ensemble et de le renverser. 9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/DVD/VCR and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/DVD/VCR on a bed, sofa, rug, or other similar surface. This TV/DVD/VCR should never be placed near or over a radiator or heat register. This TV/DVD/VCR should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10.Power Sources-This TV/DVD/VCR should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/DVD/VCRs intended to operate from battery power, or other sources, refer to the operating instructions. 11.Grounding or Polarization-This TV/DVD/VCR is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. -2- EN 1B15 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/DVD/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) 14.Lightning-For added protection for this TV/DVD/VCR receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/DVD/VCR due to lightning and power-line surges. 15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17.Object and Liquid Entry-Never push objects of any kind into this TV/DVD/VCR through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD/VCR. 18.Servicing-Do not attempt to service this TV/DVD/VCR yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19.Damage Requiring Service-Unplug this TV/DVD/VCR from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV/DVD/VCR. c. If the TV/DVD/VCR has been exposed to rain or water. d. If the TV/DVD/VCR does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/DVD/VCR to its normal operation. e. If the TV/DVD/VCR has been dropped or damaged in any way. f. When the TV/DVD/VCR exhibits a distinct change in performance-this indicates a need for service. 20.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21.Safety Check-Upon completion of any service or repairs to this TV/DVD/VCR, ask the service technician to perform routine safety checks to determine that the TV/DVD/VCR is in proper operating condition. 22.Heat-This TV/DVD/VCR product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. -3- EN 1B15 PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. -4- EN 1B15 LOCATION For safe operation and satisfactory performance of your TV/DVD/VCR, keep the following in mind when selecting a place for its installation: · Shield it from direct sunlight and keep it away from sources of intense heat. · Avoid dusty or humid places. · Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. · Install unit in a horizontal position. · Avoid locations subject to strong vibration. · Do not place the TV/DVD/VCR near strong magnetic fields. · Avoid moving TV/DVD/VCR to locations where temperature differences are extreme. WARNING Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a DVD is played in a TV/DVD/ VCR which has moisture, it may damage the DVD and TV/DVD/VCR. Therefore when the condensation occurs inside the unit, turn the POWER on and allow at least 2 hours for the unit to dry out. SYMBOLS USED IN THIS MANUAL The following symbols below appear in some headings and notes in this manual, with the following meanings TV/VCR : Description refers to TV/VCR operation (in the TV/VCR mode). DVD-V AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE · Do not handle the power cord with wet hands. · Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug. : Description refers to playback of DVD video discs (in the DVD mode). CD : Description refers to playback of audio CDs (in the DVD mode). MP3 : Description refers to playback of MP3 discs (in the DVD mode). · If, by accident, water is spilled on your unit, unplug · · the power cord immediately and take the unit to our Authorized Service Center for servicing. Do not put your fingers or objects into the TV/DVD/VCR disc loading tray. Do not place anything directly on top of the unit. QUICK : Description refers to the items to be set by the QUICK mode (in the DVD mode). A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. The serial number of this product may be found on the back of the unit. No other TV/DVD/VCR has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file. Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No. -5EN 1C29 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . .2, 3 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . .5 WARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . . . . . . . . .5 C TABLE OF CONTENTS . . . . . . . . . .6 C FEATURES . . . . . . . . . . . . . . . . . . . .7 C OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . . . . . . . .9, 10 C PREPARATION FOR USE . . . . . . .11 ANTENNA/CABLE CONNECTION . . . . . . . . . . . . . . . .11 CONNECTING TO EXTERNAL INPUT JACKS . . . . . . . . . . . . . . . .12 INSTALLING THE BATTERIES . . .12 EXTERNAL INPUT MODE . . . . . .12 CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT DECK (for DVD) . . . . . . . . . . . .13 CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER (for DVD) . . .14 TV/VCR SECTION C SET UP FOR USE . . . . . . . . . . . . .15 CHANNEL SET UP FOR THE FIRST TIME . . . . . . . . .15 DELETING (OR ADDING) CHANNEL . . . . . . . . . . . . . . . . . . .15 CHANNEL SET UP AGAIN . . . . . .16 SELECTING THE LANGUAGE . . .16 DAYLIGHT-SAVING TIME . . . . . .16 CLOCK SET UP (AUTO / MANUAL) . . . . . . . . .17, 18 C TV OPERATION . . . . . . . . . . . . . . .19 WATCHING A TV PROGRAM . . .19 DEGAUSSING . . . . . . . . . . . . . . . .19 PICTURE CONTROL . . . . . . . . . . .19 CLOSED CAPTION SYSTEM . . . .20 V-CHIP SET UP . . . . . . . . . . . . . . .21 C MTS(Multi-Channel Television sound)SYSTEM . . . . . . . . . . . . . . . .23 CHECKING THE SELECTED MTS MODE . . . . . . . . . . . . . . . . . .23 MTS RECORDING/MONITOR MODE . . . . . . . . . . . . . . . . . . . . . .23 SELECTING THE MTS SYSTEM . . .24 C VIDEO CASSETTE . . . . . . . . . . . . .25 C PLAYBACK . . . . . . . . . . . . . . . . . . .26 NORMAL PLAYBACK . . . . . . . . .26 TRACKING ADJUSTMENT . . . . .26 SLOW MOTION . . . . . . . . . . . . . .26 PICTURE SEARCH . . . . . . . . . . . .26 STILL PICTURE . . . . . . . . . . . . . .26 VERTICAL HOLD CONTROL . . .26 C SPECIAL PLAYBACK . . . . . . . . . .27 RENTAL PLAYBACK . . . . . . . . . .27 AUTO REPEAT PLAYBACK . . . . .27 C SEARCH . . . . . . . . . . . . . . . . . . . . .28 ZERO RETURN . . . . . . . . . . . . . . .28 TIME SEARCH . . . . . . . . . . . . . . .28 INDEX SEARCH . . . . . . . . . . . . . .29 C SPECIAL FEATURES . . . . . . . . . .29 REAL TIME TAPE COUNTER . . .29 AUTO REWIND-EJECT . . . . . . . .29 C RECORDING . . . . . . . . . . . . . . . . .30 NORMAL RECORDING . . . . . . . .30 SKIPPING UNWANTED SCENES DURING RECORDING . . . . . . . . . . . . . . . . .30 OTR (One Touch Recording) . . . . . .31 COPYING A VIDEO CASSETTE (Requires a VCR or camcorder) . . .31 C TIMER . . . . . . . . . . . . . . . . . . . . . .32 AUTOMATIC TIMER RECORDING . . . . . . . . . .32 TIMER PROGRAM EXTENSION . . .33 HINTS FOR AUTOMATIC TIMER RECORDING . . . . . . . . . . . . . . . . .34 AUTO RETURN . . . . . . . . . . . . . . .34 SLEEP TIMER . . . . . . . . . . . . . . . .34 C ON SCREEN DISPLAY . . . . . . . . .35 C CABLE CHANNEL DESIGNATIONS . . . . . . . . . . . . . .35 DVD SECTION C ABOUT THE DISCS . . . . . . . . . . . .36 PLAYABLE DISCS . . . . . . . . . . . .36 DISC TYPES . . . . . . . . . . . . . . . . .36 C PLAYING A DISC . . . . . . . . . . . . . .37 BASIC PLAYBACK . . . . . . . . . . . .37 GENERAL FEATURES . . . . . . . . .37 DISC MENU . . . . . . . . . . . . . . . . .37 TITLE MENU . . . . . . . . . . . . . . . . .37 RESUME . . . . . . . . . . . . . . . . . . . .38 PAUSE . . . . . . . . . . . . . . . . . . . . . .38 STEP BY STEP PLAYBACK . . . . .38 FAST FORWARD/REVERSE SEARCH . . . . . . . . . . . . . . . . . . . .38 SLOW FORWARD / SLOW REVERSE . . . . . . . . . . . . . . . . . . . .38 ZOOM . . . . . . . . . . . . . . . . . . . . . .38 C SEARCH FUNCTION . . . . . . . . . . .39 TRACK SEARCH . . . . . . . . . . . . .39 TITLE / CHAPTER SEARCH . . . .39 TIME SEARCH . . . . . . . . . . . . . . .39 MARKER SETUP SCREEN . . . . . .39 C SPECIAL PLAYBACK FUNCTION . . .40 REPEAT . . . . . . . . . . . . . . . . . . . . .40 PROGRAM . . . . . . . . . . . . . . . . . . .40 RANDOM PLAYBACK . . . . . . . . .40 C PLAYING A MP3 DISC . . . . . . . . . .41 MP3 PLAYBACK . . . . . . . . . . . . . .41 TRACK SELECTION . . . . . . . . . . .41 PROGRAM . . . . . . . . . . . . . . . . . . .41 RANDOM PLAYBACK . . . . . . . . .41 C CHANGING THE SETTINGS . . . .42 SUBTITLE LANGUAGE . . . . . . . .42 AUDIO LANGUAGE . . . . . . . . . . .42 STEREO SOUND MODE . . . . . . . .42 CAMERA ANGLE . . . . . . . . . . . . .42 BLACK LEVEL SETTING . . . . . . .42 VIRTUAL SURROUND . . . . . . . . .42 C THE ON-SCREEN INFORMATION . . .43 C CHANGING THE DVD SETUP ITEMS . . . . . . . . . . . . . . . . . . . . . . .44 LANGUAGE SETTING . . . . . . . . .44 DISPLAY SETTING . . . . . . . . . . . .45 AUDIO SETTINGS . . . . . . . . . . . .45 PARENTAL CONTROL . . . . . . . . .46 C TROUBLESHOOTING GUIDE . . .47 C MAINTENANCE . . . . . . . . . . . . . . .50 DISC HANDLING . . . . . . . . . . . . .50 C SPECIFICATIONS . . . . . . . . . . . . .51 C WARRANTY . . . . . . . . . . .Back Cover -6- EN 1C29 FEATURES TV/VCR Mode · Hi-Fi system­The Hi-Fi stereo recording system · · · offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter. Rotary 4-head Record/Playback System­Four heads ensure excellent picture quality and special effects playback. Index Search­Fast-forwards to start of next recording. Slow Motion­View recorded program at slower than normal speed. · 2 Step picture search operation­You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode. For SP mode only high speed. · Three different playback tape speeds : SP/LP/SLP · Two different recording tape speeds : SP/SLP · Auto Head Cleaner­Automatically cleans video heads as you insert or remove a cassette. · Infrared remote control · Trilingual on screen TV/VCR setup display · selectable in English or Spanish or French Real time counter­This shows the elapsed recording · Zero Return­The tape returns to counter of · · 0:00:00 by rewinding or fast forwarding. Still­"Freeze" the picture at any time, for close viewing of a particular scene. adjusts the tracking for each tape you play. or playback time in hours, minutes, and seconds. The "­" indication will appear when the tape is rewound further than the tape counter position "0:00:00". er tuner with direct station call­(A converter may be necessary to view scrambled cable channels.) Auto Clock Setting­Allows you to set the clock function from a PBS broadcast station. Closed caption system­You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. · Digital Auto Tracking (DTR)­Automatically Rental play mode­Improves playback picture quality from worn tapes, such as rental tapes. tape indefinitely without pressing the PLAY button. advance the tape by entering the desired playback time you want to skip. OTR (One Touch Recording)­Instant timed recording from 30 to 480 minutes is possible at the push of the REC/OTR button. Timer Recording)­The built-in timer allows you to · 181 channel capability PLL frequency synthesiz· · · Auto repeat­Allows you to repeat the playing of a · Time search­Let you set the TV/DVD/VCR to · · Auto power on and off system­Automatically · Auto rewind when the end of a tape is timer recording. · 1 Year, 8 events (including Daily and Weekly turns on the TV/DVD/VCR when you insert the cassette, turns off after auto-rewind, and ejects when the beginning of the tape is reached. reached­This function doesn't occur when using · Smooth mode change­TV/VCR mode, DVD mode automatically changes without control. · · · · · record up to 8 programs at different times on different channels up to 1 year in advance. The Daily timer allows recordings to be made of daily broadcasts, and the Weekly timer allows recording to be made once a week up to the end of the tape. Auto return­After timer recording is finished, the TV/DVD/VCR can return to the beginning of the recording. Sleep timer­Allows you to have the TV/DVD/VCR automatically turn on or off at a desired time. Auto Shut Off Function­If there is no air signal input from the antenna terminal and no operation for 15 minutes, the TV/DVD/VCR will turn itself off automatically. Timer Program Extension­Allow you to shift the time schedule for automatic timer recording. V-CHIP­Enables parents to prevent their children from watching inappropriate material on TV. A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. -7EN 1C29 DVD Mode ¡Dolby Digital sound ¡On-screen display This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder. ¡Still/fast/slow/step playback Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames. ¡Random playback for audio CD and MP3 Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control. ¡Search Chapter search / Title search / Track search / Time search ¡Repeat This player can shuffle the order of tracks to play them in random order. You can program the order of tracks to play them in any desired order. Chapter / Title / Track / Group / All / A-B ¡Zoom ¡Program playback for audio CD and MP3 Magnified screen can be displayed. ¡Marker ¡DVD menus in a desired language The part designated by user can be called back. ¡Resume Play You can display DVD menus in a desired language, if available on a DVD. ¡Screen saver/Auto power-off functions User can resume to playback from the part at which the play was stopped. The screen saver program starts when there is no input from the player for five minutes in the stop mode. When the screen saver program is activated for 15 minutes, the power automatically turns off. ¡Subtitles in a desired language ¡Virtual Surround ¡Bit rate indication ¡DRC (Dynamic range control) You can control the range of sound volume. You can select a desired language for the display subtitles, if that language is available on a disc. ¡Selecting a camera angle You can select the desired camera angle, if a disc contains sequences recorded from different angles. ¡Choices for audio language and sound mode You can select the desired audio language and sound mode, if different languages and modes are available on a disc. ¡Parental lock You can set the control level to limit playback of discs which may not be suitable for children. ¡Automatic detection of discs This player automatically detects if the loaded disc is DVD, audio CD or MP3 on disc. ¡Playback MP3 disc NOTE: · We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this TV/VCR/DVD, please be aware that the code number given may not operate this TV/VCR/DVD. In this case, please call the manufacturer of the universal remote control. -8EN 1C29 OPERATING CONTROLS AND FUNCTIONS - TV/DVD/VCR FRONT PANEL - [Fig.1] DVD buttons POWER VOLUME SKIP PLAY SKIP STOP OPEN/CLOSE SELECT CHANNEL DVD SEARCH TV/VCR TV/VCR buttons REC/OTR REW PLAY F.FWD STOP/EJECT HEADPHONE VIDEO L AUDIO R 7 8 9 10 1112 13 14 4 15 16 17 18 19 20 21 5. STOP Button [P.37] [Fig. 2] - REMOTE CONTROL Stops operation of the disc. (Front Panel) Stops operation of the disc or tape. (Remote control) 6. OPEN/CLOSE Button [DVD P.37] Press to insert discs into or remove them from the POWER PICTURE SLEEP SELECT tray. 1 45 7. Disc loading tray 44 22 1 2 3 8. DVD Indicator CH. 11 Lights on during DVD mode. 4 5 6 23 9. SELECT Button 7 8 9 Press to change to TV/VCR mode, external input VOL. PAUSE +100 2 0 +10 24 mode or DVD mode. SPEED C.RESET ZOOM MUTE 10.TV/VCR Indicator 25 43 Lights on during TV/VCR mode. 26 42 PLAY 11. CHANNEL K/L Buttons 3 (DVD) (DVD) 3 Press to select memorized channel. 15 (TV/VCR) (TV/VCR) 14 STOP DISC 4 5 12. Recording Indicator RECORD MENU 13 41 Flashes during recording. Lights up in the StandDISPLAY by mode for Timer Recording. 40 ENTER 27 39 SETUP TITLE RETURN 13. REC/OTR (RECORD)Button [TV/VCR P.30, 31] 28 38 Press for manual recording. Activates One Touch 29 A-B CLEAR SEARCH MODE REPEAT 37 Recording. (OTR is only during TV/VCR mode.) 30 AUDIO SUBTITLE ANGLE MODE 14. REW Button (for TV/VCR) [TV/VCR P.26] 31 36 Press to rewind the tape, or to view the picture 35 32 rapidly in reverse during playback mode. (Rewind 33 34 Search) 15. FWD Button (for TV/VCR) [TV/VCR P.26] Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) 1. POWER Button [TV/VCR P.15 / DVD P.37] 16. STOP/EJECT Button [TV/VCR P.28] Press to turn the power on and off. Press to stop the tape motion. Press in the Stop 2. VOLUME X/Y Buttons mode to remove tape from the TV/VCR/DVD. Press to control the volume level for the DVD and TV. 17. Remote sensor window 3. SKIP Buttons (for DVD)[P.38] 18. HEADPHONE Jack Press once to skip chapters or tracks to a desired To connect headphone (not supplied) for personal point. listening. Press and hold to change forward or reverse play19. VIDEO input Jack back speed. Connect to the video output jack of a video 4. PLAY Button [TV/VCR P.26 / DVD P.37] camera or VCR. Starts playback of the disc or tape contents. 1 2 34 3 5 6 -9EN 1C29 - TV/DVD/VCR REAR PANEL - [Fig.3] ANT. COAXIAL 46 20. AUDIO L/R input Jacks Connect to the audio output jacks of a video camera or VCR. 21. Cassette compartment 22. PICTURE Button Press to adjust the picture. 23. Number Buttons TV Mode:[P.15] 47 48 Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel. +100 Button­ Press to select cable channels which are equal or greater than number 100. DVD Mode: Press to enter the desired number. +10 Button­ Press to enter the desired numbers which are equal or greater than number 10. 24. PAUSE Button [TV/VCR P.26 / DVD P.38] Pauses the current disc or tape operation. 25. SPEED Button [TV/VCR P.30] Press to choose the desired recording speed: SP/SLP. 26. C.RESET Button [TV/VCR P.28] Press to reset counter to 0:00:00. Press to cancel a setting of timer program. (See page 33.) 27. DISPLAY Button TV/VCR Mode: 31. MODE Button [DVD P.41] Activates program playback or random playback mode. 32. SEARCH MODE Button [DVD P.39] Press to locate a desired point. 33. AUDIO Button [DVD P.42] Press to select a desired audio language or sound mode. 34. SUBTITLE Button [DVD P.42] Press to select a desired subtitle language. 35. REPEAT Button [DVD P.42] Repeats playback of the current disc, title, chapter or track. 36. ANGLE Button (DVD mode) [DVD P.42] Press to change the camera angle to see the sequence being played back from a different angle. 37. A-B REPEAT Button [DVD P.40] Repeats playback of a selected section. 38. RETURN Button Returns to the previous operation in the TV/VCR setup mode and in the DVD setup mode. 39. ENTER Button Press to accept a setting. 40. Arrow Buttons TV/VCR Mode: Press to select a setting mode from the menu on the TV screen. Press to select or adjust from a particular menu. DVD Mode: Use when making settings while watching the display on a TV screen. 41. DISC MENU Button [DVD P.37] Displays the menus in the DVD. 42. ZOOM Button [DVD P.38] Enlarges part of a DVD-reproduced image. 43. MUTE Button Mutes the sound. Press it again to resume sound. 44. SLEEP Button [TV/VCR P.34] Sets the Sleep Timer. 45. SELECT Button Press to switch TV/VCR and DVD mode. You can see the mode (TV/VCR or DVD) on the front panel indicator. EN 1C29 Display the counter or the current channel number and current time on the TV screen. DVD Mode:[P.43] Displays the current status on the TV screen for checking purposes. 28. SETUP Button [TV/VCR P.15] [DVD P.44-46] Press to enter or exit the TV menu or DVD setup mode. 29. TITLE Button [DVD P.37] Displays the title menu. 30. CLEAR Button [DVD P.39] Resets a setting. - 10 - 46. ANT. in Jack Connect to an antenna, cable system, or satellite system. 47. Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. 48. COAXIAL digital audio out Jack Connect to the digital input of an external amplifier or decoder for DVD audio only. PREPARATION FOR USE ANTENNA/CABLE CONNECTION Satellite Box or Cable Box (Not supplied) OUT IN VHF/UHF Antenna (Not supplied) From Cable System or Satellite Dish VHF Antenna (Not supplied) From Cable System 75-ohm Coaxial Cable (Not supplied) ANT. COAXIAL UHF Antenna (Not supplied) or VHF/UHF Combiner (Not supplied) 75-ohm Coaxial Cable (Not supplied) ANT. or [Fig. 4] or Flat twin-lead cable VHF/UHF SEPARATE ANTENNAS In some areas it will be necessary to use an outdoor antenna. CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/DVD/VCR Remote Control. Unattended timer recording is limited to one channel at a time. Antenna/Cable Connections Continued on the Next Page. CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX Use this connection if your cable system connects directly to your TV/DVD/VCR without a converter box. By using this connection you can: 1) Use the TV/DVD/VCR remote to select channels. 2) Program one or more unscrambled channels for Automatic Timer Recording. NOTE: This TV/VCR/DVD will ONLY record and view the same channel. - 11 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TV/DVD/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover. EXTERNAL INPUT MODE When using an external input signal (another VCR or video camera), connect the player's audio/video output cables to the AUDIO L/R IN/ AUX VIDEO IN jacks of your TV/DVD/VCR. Then press the CHANNEL button K or L until "AUX" appears on the screen. CONNECTING TO EXTERNAL INPUT JACKS When you watch a program recorded on an another source (VCR or video camera), use the audio/video input jacks on the front of the TV/DVD/VCR. Connect the audio/video output jacks of another source to the AUDIO L/R and VIDEO jacks of this TV/DVD/VCR. Then press the CHANNEL buttons K/L until "AUX" appears on the screen. NOTE: · When you connect a monaural VCR (another source) to this TV/DVD/VCR, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this TV/DVD/VCR. The audio will output in both L and R channel equally. To the audio output jacks [Another source] HEADPHONE VIDEO L AUDIO R Audio/Video adapter cable (not supplied) etc. To the video output jack [Front of the TV/DVD/VCR] [Fig. 5] - 12 - EN 1C29 CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT DECK (for DVD) Use an audio coaxial digital cable available at retail for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck. ANT. COAXIAL Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. To COAXIAL DIGITAL AUDIO INPUT jack To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack (only DVD AUDIO OUT) [Fig. 6] NOTES: · The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck. · Be sure to turn off the power to all components in the system before connecting another component. · Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VCR. · Set Dolby Digital to OFF for audio output in the setup mode. Playing a TV/DVD/VCR using incorrect settings may generate noise distortion, and may also damage the speakers. - 13 - EN 1C29 CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this TV/DVD/VCR to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD/VCR outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables available at retail for the audio connections. Front speaker (left) Center speaker Front speaker (right) ANT. COAXIAL Dolby Digital decoder To COAXIAL DIGITAL AUDIO INPUT jack Surround speaker (right) Subwoofer To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack Surround speaker (left) [Fig. 7] NOTES: · Be sure to turn off the power to all components in the system before connecting another component. · Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VCR. · If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.) · Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD/VCR using incorrect settings may generate noise distortion, and may also damage the speakers. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. - 14 - EN 1C29 TV/VCR SECTION SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box. CHANNEL SET UP FOR THE FIRST TIME TV/VCR DELETING (OR ADDING) CHANNEL TV/VCR The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) 1 Plug in the TV/DVD/VCR power cord Plug the TV/DVD/VCR power cord into a standard AC outlet. NOTE: · If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 1 Select "CHANNEL SET UP" - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK B CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 2 3 Turn on the TV/DVD/VCR Press the POWER button to turn on the TV/DVD/VCR. Select "ENGLISH" or "ESPAÑOL" or "FRANÇAIS" ­ SET UP ­ B LANGUAGE [ENGLISH] ESP AUTO PRESET FRA Press the SETUP button on the remote control. Press the Arrow button K or L to point to "CHANNEL SET UP". Then, press the ENTER button. 2 Select "ADD/DELETE CH" ­ CHANNEL SET UP ­ B ADD / DELETE CH (TV) AUTO PRESET Select "ENGLISH" or "ESPAÑOL"=Spanish or "FRANÇAIS" =French using the ENTER button. "[ ]" indicate the selected language. Press the Arrow button K or L to point to "ADD/DELETE CH". Press the ENTER button. 4 Begin auto preset ­ SET UP ­ 3 Enter the desired channel number Press the Arrow button K or L to point to "AUTO PRESET". Then press the ENTER button. The tuner scans and memorizes all active channels in your area. NOTES: · The TV/DVD/VCR distinguishes between standard TV channels and cable channels. · If you want to play or record a video tape BEFORE presetting the tuner, you must press the SETUP button on the remote control. To preset the tuner again, see "CHANNEL SET UP AGAIN" on page 16. · The TV/DVD/VCR may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO MEMO action again when reception conditions are better. LANGUAGE [ENGLISH] ESP FRA B AUTO PRESET Press the Arrow button K or L until your desired channel number appears. (You can also use the number buttons or the CHANNEL buttons K/L to enter it) (Example: CH8) 08 ADD / DELETE 4 Delete (or add) it from (into) memory Press the ENTER button. The channel number changes to light red. The channel is deleted from memory. Added channel: Light blue. Deleted channel: Light red. · To delete another channel, repeat steps [3] and [4]. · If you press the ENTER button again, the channel is memorized again. · Press the RETURN button to return to TV/VCR SETUP MENU. 5 After scanning The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or the CHANNEL button K or L. 5 Exit the channel setup mode Press the SETUP button on the remote control to returns to TV mode. NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL button K or L. EN 1C29 - 15 - CHANNEL SET UP AGAIN TV/VCR Make sure ... · Press the POWER button to turn on the TV/DVD/VCR. NOTE: If Spanish or French is selected accidentally, 1) Press the SETUP button on the remote control. 2) Press the Arrow button K or L to point to "IDIOMA [ESPAÑOL]" or "LANGAGE" [FRANÇAIS]. 3) Press the ENTER button to select your desired language. 4) Press the SETUP button to exit. 1 Select "CHANNEL SET UP" DAYLIGHT-SAVING TIME - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK B CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH Press the SETUP button on the remote control. Press the Arrow button K or L to point to "CHANNEL SET UP". Then, press the ENTER button. TV/VCR Select this feature and the TV/DVD/VCR's clock automatically will advance one hour in April, then reverse one hour in October. When Daylight-Saving Time is ON, the clock will change automatically as follows: · First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record. · Last Sunday of October : At 2 AM the clock immediately changes to 1 AM. Make sure ... · Press the POWER button to turn on the TV/DVD/VCR. 2 Begin auto preset ­ CHANNEL SET UP ­ ADD / DELETE CH (TV) B AUTO PRESET Press the Arrow button K or L to point to "AUTO PRESET". Then, press the ENTER button. The tuner scans and memorizes all the active channels in your area. 3 After scanning The tuner stops on the lowest memorized channel. 1 Select "SETTING CLOCK" - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH SELECTING THE LANGUAGE TV/VCR Make sure ... · Press the POWER button to turn on the TV/DVD/VCR. NOTE: This function effects only the language on the screen menu and not the audio source. Press the SETUP button on the remote control. Press the Arrow button K or L to point to "SETTING CLOCK." Then, press the ENTER button. 2 Set "D.S.T." (Daylight-Saving ­ SETTING CLOCK ­ AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [02] MANUAL CLOCK SET B D.S.T. [ON] Time) to [ON] 1 Select "LANGUAGE" - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP B LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH Press the SETUP button on the remote control. Press the Arrow button K or L to point to "LANGUAGE". Press the Arrow button K or L to point to "D.S.T." Then, press the ENTER button until [ON] appears. 3 Exit the Daylight-Saving Time mode 2 Select "ENGLISH" or "ESPAÑOL" or "FRANÇAIS" Press the SETUP button on the remote control to return to TV mode. Select "ENGLISH" or "ESPAÑOL"= Spanish or "FRANÇAIS"= French using the ENTER button. TO CANCEL THE DAYLIGHT-SAVING TIME Repeat steps [1] to [2], select [OFF] using the ENTER button. 3 Exit the Language mode Press the SETUP button on the remote control to return to TV mode. - 16 - EN 1C29 CLOCK SET UP (AUTO / MANUAL) TV/VCR The TV/DVD/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/DVD/VCR. Then, setup auto clock correction which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only. 6 Select the hour ­ MANUAL CLOCK SET ­ MONTH DAY 05 / 06 HOUR TUE YEAR 2003 Press the Arrow button K or L until your desired hour appears. (Example: 5, PM) Then, press the Arrow button B. MINUTE PM 05 : ­­ 7 Select the minute ­ MANUAL CLOCK SET ­ MONTH DAY 05 / 06 HOUR TUE YEAR 2003 Press the Arrow button K or L until the desired minute appears. (Example: 40) MINUTE PM 05 : 40 MANUAL CLOCK SETTING Make sure ... · TV/DVD/VCR power is turned on. In the example below, the clock is to be set to: DATE May 6th, 2003 SETTING TIME 5:40PM 8 Start the clock 5:40 PM 1 Select "SETTING CLOCK" - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH Press the SETUP button on the remote control. Press the Arrow button K or L to point to "SETTING CLOCK". Then, press the ENTER button. Press the SETUP button on the remote control. Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. TO CHANGE CLOCK SETTING ­ SETTING CLOCK ­ AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [02] B MANUAL CLOCK SET D.S.T. [OFF] 2 Select "MANUAL CLOCK SET" Press the Arrow button K or L to point to "MANUAL CLOCK SET". Then, press the ENTER button. 3 Select the month If you want to change the clock, 1)Follow steps [1] and [2]. 2)Select where you want to change using the Arrow button B or s. 3)Enter correct numbers using the Arrow button K or L. 4)Press the SETUP button on the remote control to start the clock. PLEASE NOTE: If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and press the ENTER button to turn [OFF] this function. Then you can manually adjust the clock. ­ MANUAL CLOCK SET ­ MONTH DAY 05 / ­­ HOUR YEAR ­­­ ­­­­ Press the Arrow button K or L until your desired month appears. (Example: May 05) Then, press the Arrow button B. MINUTE ­­ ­­ : ­­ 4 Select the day ­ MANUAL CLOCK SET ­ MONTH DAY 05 / 06 HOUR YEAR ­­­ ­­­­ Press the Arrow button K or L until your desired day appears. (Example: 6th 06) Then, press the Arrow button B. MINUTE ­­ ­­ : ­­ 5 Select the year ­ MANUAL CLOCK SET ­ MONTH DAY 05 / 06 HOUR TUE YEAR 2003 Press the Arrow button K or L until your desired year appears. (Example: 2003) Then, press the Arrow button B. MINUTE ­­ ­­ : ­­ - 17 - EN 1C29 AUTOMATIC CLOCK SETTING Make sure ... · The TV/DVD/VCR is turned on. · Confirm the TV/DVD/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT IN jack on the rear of the TV/DVD/VCR. NOTE: · If a cable converter box is being used, make sure it is powered on. · You must use the TV/DVD/VCR remote control to perform the clock setting procedure. Press the Arrow button K or L to select "SETTING CLOCK". Press the ENTER button to enter "SETTING CLOCK" menu. Press the Arrow button L to select "AUTO CLOCK CH". Press the ENTER button, then press the Arrow button B or s until you locate Auto Clock Set station number. See item 3 above. Press the SETUP button to exit the screen. - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH ­ SETTING CLOCK ­ AUTO CLOCK [ON] AUTO CLOCK CH SEARCH B AUTO CLOCK CH [ 45] MANUAL CLOCK SET D.S.T. [OFF] 1 Select "SETTING CLOCK" - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 5 Turn off the TV/DVD/VCR Press the SETUP button on the remote control. Press the Arrow button K or L to select "SETTING CLOCK". Press the ENTER button to enter "SETTING CLOCK" menu. Once the TV/DVD/VCR is turned off , it will periodically check and set the correct date and time. 2 Set "AUTO CLOCK" to [ON] ­ SETTING CLOCK ­ B AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [02] MANUAL CLOCK SET D.S.T. [OFF] Press the ENTER button until AUTO CLOCK [ON] appears. 3 Begin "AUTO CLOCK CH SEARCH" Press the Arrow button L to select "AUTO CLOCK CH SEARCH". Press the ENTER button. · The TV/DVD/VCR is now searching for the station which contain the auto clock set signal. The search for a signal may take up to 20 seconds per channel. · "_ _" appears at the lower left of the screen when the search has ended. · Auto Clock station- write down the number(s) that appear on the screen. These are the auto clock station(s) in your area. See item 4 below. · If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 17. Press the SETUP button to exit the screen. NOTE: During Auto Clock CH Search, the picture may be distorted. This is normal. ­ SETTING CLOCK ­ AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [02] MANUAL CLOCK SET D.S.T. [OFF] ­ AUTO CLOCK CH SEARCH ­ 08 10 13 __ 4 Enter the channel number that contains the Automatic Clock Setting Signal Press the SETUP button on the remote control. - 18 EN 1C29 TV OPERATION WATCHING A TV PROGRAM TV/VCR PICTURE CONTROL TV/VCR The TV/DVD/VCR's picture controls ­ BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS ­ are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image. NOTES: · Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled. · When setting the Picture Control, the Game mode will be cancelled. Make sure ... · TV/DVD/VCR power must be turned on. 1 Turn on the TV/DVD/VCR Press the POWER button to turn on the TV/DVD/VCR. 2 Select the channel number Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control. Note for using the Number button on the remote control: ¡When selecting cable channels which are higher than 99, press +100 first, then, press the last two digits. (Example: to select channel 125, first press "+100" then press "2" and "5"). ¡You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). Remember: If the TV/DVD/VCR is connected to a cable box or satellite box, the TV/DVD/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box. 1 2 Select "PICTURE CONTROL" Press the PICTURE button on the remote control. Select item you want to adjust 3 Adjust sound Press the VOLUME button X or Y to adjust the volume. VOLUME 20 Press the Arrow button K or L until desired control is displayed. BRIGHT CONTRAST COLOR TINT SHARPNESS BRIGHT ­PPPPPPPCPPPPPPP+ C C C C C CCCCCCC NOTES: · If you press the CHANNEL button o or p in the DVD mode, you can change the TV channels. Even if you turn off the TV/DVD/VCR in the DVD mode, when you turn it on again, it will go into the TV/VCR mode. 3 Adjust the picture control Press the Arrow button B or s to adjust to your desired level. Arrow button s to decrease brightness to decrease contrast to pale to purple to soft Arrow button B to increase brightness to increase contrast to brilliant to green to clear BRIGHT CONTRAST DEGAUSSING TV/VCR Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move this TV/VCR/DVD away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes or so later. COLOR TINT SHARPNESS · If there is a power failure of any kind, the TV/VCR/DVD will retain its memory for this feature. - 19 - EN 1C29 CLOSED CAPTION SYSTEM TV/VCR You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want. 1-2: You may get these captions or text information by selecting either "1" or "2". Caption "2" is used, usually for a second language if available. NOTE: Not all programs are broadcast with closed captions. Your television is designed to provide error free closed captions from high quality antenna, cable and VCR signals. Conversely, poor quality signals are likely to result in caption errors or no captions at all. Common signal conditions which may cause captions errors are listed below: · Automobile ignition noise · Electric motor brush noise · Weak snowy reception on TV screen · Multiplex signal reception displaying picture ghosts or airplane flutter. · Playback of poorly recorded or worn VCR tapes. NOTE: If the TV/DVD/VCR displays a black box on the TV screen, this means that the TV/DVD/VCR is set to the TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF]. Make sure ... · TV/DVD/VCR power must be turned on. 1 Select "CAPTION" - TV/VCR SETUP TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] B CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH Press the SETUP button on the remote control. Press the Arrow button K or L to point to "CAPTION". 2