operating manual contents | 01 version v3.70 06/02 02 04 15 16 17 18 19 20 22 23 24 25 27 28 29 30 31 33 34 35 36 37 38 40 product diagram welcome getting started source and tv connection connecting speakers switching on/off display and status screen using the AV32R remote selecting an analog input selecting a digital input / tape monitor selecting a video input video switching volume control start volume / muting muting methods night mode cursor keys assignment balance adjustment LFE/subwoofer level mode dependent subwoofer/centre trim lip sync delay on-screen display front panel display decoding and surround modes 4 2 programme source indicator/mono 4 3 direct/HDCD 4 4 stereo/TAG McLaren Surround 4 5 Pro Logic 4 6 Pro Logic II 4 8 Dolby Digital/MPEG 2 4 9 THX Cinema 5 0 THX Surround EX 5 1 Dolby Digital + Matrix 5 2 DTS / DTS Music / DTS-ES 6.1 Matrix and Discrete 5 4 outputs 5 5 Digital Radio 6 3 Progressive Scan Module PSM192 6 5 TAGtronic Sync Link T 2 L 6 6 TAGtronic Communications Bus 7 1 AC-3 RF decoder 7 2 software upgrades 7 3 programming the remote control 7 9 running in and warming up 8 0 fuses/cleaning/ser vice 8 1 care and maintenance 8 2 diagnostic messages 8 5 operational difficulties 8 9 technical data 9055B AV32R/AV32Rbp-192 operating manual product diagram 01 02 03 04 05 06 07 08 09 10 11 12 1 3 (1) 1 4 (1) 15 16 17 18 1 9 (1) 20 21 22 23 24 25 26 27 1. product diagram power/standby LED input buttons mode buttons balance buttons status indicators display volume knob remote control active LED remote control window power button fuse carrier ac supply socket action switches external remote in/out Digital Radio antenna (option) TA G t r o n i c C o m m u n i c a t i o n s B u s S-Video in/out sockets composite video in/out sockets back channel output sockets digital input sockets TA G t r o n i c S y n c h r o n i s a t i o n L i n k T 2 L digital output 2 (optional input AC-3 RF for Laserdiscs) digital output socket(s) analog output sockets (5.1) tape monitor analog input sockets, incl. tape 5.1 analog bypass operating manual 03 1. 3. 4. 6. 7. 9. 10. INPUT MODE FUNCTION VOLU UME analog digital video tape surround THX Cinema mute/standby display ok normal auto detect balance mute tape av processor AV32R 192 2. 5. 8. 11. 13. 14. 15. 18. 19. 23. 24. 27. 220-240V ~ 50-60Hz Fuse: T1A L 250V SWITCHES A. 1 B. 2 C. 3 6 7 8 REMOTE IN DAB OPTION serial number Double insulated: When servicing, use only identical replacement parts. BACK BACK RIGHT LEFT SURR. made in United Kingdom SR COAXIAL OUTPUT 1 CAUTION RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT OPEN SL SUB C R L 5 BYP .1 ASS OUT OUT 50 OHM IN OUT VCR-S DVD-S OUT VCR-C TV-C DVD CD SURR. LEFT CENTRE LEFT L L R + OSD LD-C SAT-C COMPOSITE DAB MD SYNC LD 2 (AC-3 RF) SURR. RIGHT SUB RIGHT TAPE OUT TAPE AUX TUNER SAT VCR TV R + OSD BUS LD-S S­VIDEO SAT-S D I G I TA L I N P U T ANALOG OUTPUT ANALOG INPUT 12. 16. 17. 20. 21. 22. 25. 26. Processors delivered until late 2001/early 2002 might show a different rear panel artwork. There is electrically no difference between the new and old version. Changes are made purely for better readability. 02 operating manual only available if the AV32R is equipped with the `THX Surround EX Plus' option welcome welcome to Dr. Udo Zucker Chief Executive Officer TAG McLaren Audio Pushing technological boundaries; TAG McLaren's F1 electronics TAG McLaren Audio exists with one aim in mind: to produce the very best audio and audio-visual equipment in the world. Like many people, I often have my best ideas when relaxing to a piece of music or watching a movie. For years, knowing the technical capabilities of TAG McLaren, I have nurtured the ambition to push music reproduction to the absolute limit; that's why we formed TAG McLaren Audio. At the core of our development team are highly experienced engineers whose heritage of award-winning hi-fi and worldbeating electronic control systems is 04 operating manual welcome upgrade ability - guaranteed! envied by many and equalled by few. There are many immediate spin-offs into audio from our expertise in automotive electronics, mechanical engineering and the material science of Formula One motor racing: multi-layer printed circuits, fast digital signal processing, electronic noise suppression, radio frequency technology and software expertise to name but a few, all prerequisites of an outstanding audio product. TAG McLaren Audio's aim is perfection combined with aesthetic delight and solid build quality ­ a rare combination in hi-fi. Dr. Udo Zucker operating manual 05 welcome available in black or silver Thank you for purchasing the TAG McLaren surround sound processor AV32R. We live our lives through our five senses.They get us through our daily chores then help us enjoy our leisure, in whatever form it takes. Often that means turning on a home cinema system to create the illusion of an alternative reality.TAG McLaren's expertise in the latest signal processing technology, software design and audio engineering guarantees that your new audiovisual processor theatre AV32R is a leading hi-tech product for today, and a safe investment for the future.We are convinced it will give your home cinema experience a new dimension. The AV32R is a hi-performance audio-visual processor, built to 06 operating manual welcome the most demanding standards, which acts as the command centre for your entire home cinema system. It combines highresolution digital processing with hiperformance audio and video components to bring you an unrivalled home cinema experience. Furthermore, the integrated preamplification stages allow quality switching and volume control of six analog and five digital sources, so the AV32R also makes an ideal companion for your twochannel audio system. With its high-quality digital to analog converters, the AV32R will give not only your LaserDiscs and DVDs, but also your CDs transparency and depth, and with the unique TAG McLaren Surround multichannel processing mode activated CDs gain a spaciousness and ambience to rival a live performance. To maximize the performance from your theatre AV32R, it is essential to configure it correctly; this will ensure it performs its role at the heart of your home cinema system to its optimum.Without this set-up you will significantly reduce your system's potential. Audio-visual processor technology is highly sophisticated, which would lead you to believe that home-configuration would be equally taxing.This is not so with the AV32R. After connection to your television (using either the composite or S-Video outputs), simply press `menu' on the AV32R's Remote Control, select the `First Time Set-up Wizard' and with on-screen assistance you are taken step-by-step through the entire set-up procedure. For full details and additional assistance with the set-up procedure we recommend you use the dedicated Set-up Manual provided. operating manual 07 welcome key features THX Ultra-approved DTS-ES 6.1 Matrix & Discrete / DTS Neo: 6 The theatre AV32R is a `THX Ultra'-approved product; this approval is a guarantee that the AV32R provides the best possible performance for even the most discerning home cinema enthusiast, since it has passed a series of rigorous quality and performance tests. movie standards Equipped with the THX Surround EX Plus option, the AV32R will decode DTS-ES 6.1 Matrix encoded discs, using either DTS + Matrix or DTS + THX Surround EX processing. DTS-ES 6.1 Discrete(2) and DTS Neo:6 are available as an option. Dolby Pro Logic II The AV32R is fully compatible with Dolby Digital, Dolby Pro Logic,THX Cinema, DTS Digital Surround and MPEG-2 (1). THX Surround EX Plus The AV32R offered, as the world first, this advanced technology as an upgrade. A significant improvement in the reproduction of two channel tv sound and stereo music. TAG McLaren Surround 5 If your AV32R is equipped with the THX Surround EX Plus option you will be able to experience new dimensions of depth, spacious ambience and sound localization. Available exclusively for THX licensed products,THX Surround EX is a process that decodes a back surround signal from the left and right surround channels on specially encoded DVD movie releases. 08 operating manual 1. 2. The AV32R incorporates the TAG McLaren Surround mode, an audiophile-quality processing mode designed specifically for listening to stereo and mono music sources. A centre channel increases the stability of the front sound stage while a split surround supplements the ambience present on the original recording. All processing within is fully dithered, producing a high-quality algorithm capable of processing 24-bit/96kHz recordings with no artifacts. MPEG is in some countries only available as an option All DTS-ES 6.1 Discrete encoded DVDs include also DTS-ES 6.1 Matrix for back compatibility welcome TAG McLaren Surround 7 learning remote control Equipped with the THX Surround EX Plus option, the AV32R includes also a true 7 channel version of the TAG McLaren Surround Mode. HDCD® HDCD (High Definition Compatible Digital) is a proprietary technique developed by Pacific MicrosonicsTM(1) Inc. Using HDCD the recording engineer can record the music at a higher resolution than on a standard CD. HDCD encoded CDs have 20 bit resolution compared with 16 bits of ordinary CDs.This gives a greater dynamic range, a more focused, spatial image and a more musical timbre. automatic decoding and processing selection The powerful and versatile AV32R Remote Control is programmed to operate all TAG McLaren Audio home cinema products. It can also be userprogrammed to control almost any unit that uses an infra-red remote (such as our range of audio components), so just this one remote can control your whole system. For added convenience it has a backlight for easy operation in the dark. automation & action switches For the ultimate home cinema experience we have combined the THX Surround EX option with rear panel mounted remote control connectors and three action trigger switches allowing easy integration into automation systems for control of screen, curtain, lighting etc. forget printed user manuals The theatre AV32R constantly monitors the format of digital sources and automatically selects the appropriate decoding mode (such as Dolby Digital or DTS Digital Surround). Additional processing (such as Dolby Pro Logic or THX Cinema) may be selected. 1. The comprehensive `Set-up Wizard' makes setting up the AV32R an extremely easy task.There is even no need to refer to the printed manual; they are provided for convenience. Simply follow the onscreen instructions for optimum performance. , HDCD®, High Definition Compatible Digital® and Pacific MicrosonicsTM are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries operating manual 09 welcome forward thinking technology The combination of 192kHz/24-bit converters, fully upgradable operating software stored in FLASH memory, the TAGtronic Communications Bus, a powerful 32-bit Digital Signal Processor (DSP) and 16-bit microcontroller means that the AV32R is ready for any movie format ­ today, tomorrow and well into the future. Additionally, your AV32R can be upgraded with new software to decode future home cinema formats as and when they become available.This operating software will be downloadable from the Internet via a PC for home installation using a special cable (not included with the AV32R). 96kHz, 24-bit conversion, 32-bit processing The use of 24-bit converters ensures that even the loudest transients can be reproduced whilst keeping noise below the ambient level. Conversion rates of up to 96kHz are possible to support high-resolution recordings and a highprecision 32-bit floating point processor (capable of an astonishing theoretical 192dB dynamic range) is used for all internal signal processing. analog signal processing The ultra-wide dynamic range and highresolution recordings available through the latest recording media such as DVD require highestprecision digital to analog converters. To guarantee an excellent performance from analog sources (such as a VCR or an analog satellite receiver), all analog signals are carefully processed, then converted to the digital domain using a 96kHz/20-bit analog to digital converter.The signal is then processed completely in the digital domain, with the exception of the volume control, to allow for speaker position variations and to enhance the ambience and spatial quality of the audio output when TAG McLaren Surround mode is selected. 10 operating manual welcome TAGtronic Communications Bus turbo power option The TAGtronic Communications Bus enables products equipped with this advanced interface to transfer and share information easily. TAGtronic Sync Link T2L The proprietary TAGtronic Synchronisation Link sends a signal to products designed for this advanced technology (such as our dvd player DVD32R) to synchronize its clock to the master reference within the AV32R, resulting in a very low-noise, ultra-low jitter reference right next to the DACs. latest digital signal processing technology Thanks to the forward thinking of our experts the AV32R has been designed to accommodate a second Digital Signal Processor, doubling the AV32R's processing power.This future upgrade will become available when additional computing power is needed. powerful 16-bit microcontroller The 16-bit Siemens C161RI microcontroller controls and monitors all functions of the AV32R. Its high capability allows for the most comprehensive on-screen user interface, making set-up and operation extremely simple and removing the need to refer to a printed manual. stable multi-frequency internal clocks The AV32R features the world audio premiere of Analog Devices' 32-bit 66MHz ADSP-21065L SHARC Digital Signal Processor. Such is the audio power of this DSP, which has been jointly developed by Analog Devices and TAG McLaren Audio, it can decode all major movie formats yet still has sufficient spare capacity to cope with most future developments. The timing of digital audio and video data is as important as the data itself.Timing inaccuracy, known as jitter, is responsible for a wide range of subtle distortions. By using an extremely stable internal clock, these distortions are reduced to an absolute technical minimum. operating manual 11 welcome Furthermore, a steerable, multi-frequency oscillator allows the AV32R to lock automatically to all known consumer digital audio sources. minimal jitter, maximum sound quality signal. In the AV32R, a feedback circuit eliminates DC offset voltage and allows the signal path to be direct-coupled without any capacitors.This arrangement is called `Straight Line Technology'. round-core transformer The AV32R's twin phase-locked loop reduces jitter on the master clock to an absolute minimum, resulting in precision timing and hence a more transparent sound. high dynamic range analog circuitry The AV32R's transformer provides very large power reserves, resulting in a more precise and punchier sound. Its toroidal construction minimizes mechanical vibration, magnetic flux leakage and hum. stable power supply Movie sound can be very demanding, with dynamics ranging from a whisper to a war in your own living room. Careful attention has been paid to ensure that these sounds are reproduced in full, whatever your choice of programme material. straight line technology Fifteen individual linear power supplies provide superb signal separation, via Elna Cerafine bulk decoupling capacitors. premium-grade audio components To prevent intermodulation distortion, an amplification stage must respond to very low frequencies but block any direct current (DC). This is traditionally achieved using capacitors, which also block some of the low-frequency 12 operating manual Ultra-stable Vishay metal film resistors and lowdielectric loss Wima polypropylene capacitors result in increased transparency and excellent noise suppression. welcome broadcast-quality video components high-quality control knobs and facia In order to achieve outstanding picture reproduction, broadcast-quality video components have been used throughout.In addition, the OnScreen Display (OSD) processor is switched out of the video circuit when there is no OSD information. mixed technology construction All controls are manufactured in our Formula One facility from 6082-TF aluminium alloy.The facia is made from a 7mm-thick machined aluminium extrusion. Black units are hard anodised which results in almost no wear in many years of hard use. Silver units, use the same top-quality materials but are precision lacquered, resulting in a more scratch sensitive surface. vibration damping With surface mount components for fast digital signal transfer and leaded components for perfect audio signals, the AV32R incorporates mixed technology construction in one PCB to optimize performance. multi-layer pcb Both the cover and baseplate are bonded with viscoelastic laminate to provide a low Q panel with rapid absorption of externally induced vibrations. mounting feet The AV32R's glass epoxy multi-layer printed circuit board controls the complex pattern of return currents, provides controlled impedances and minimizes coupling better than a conventional circuit board could ever do. Power distribution is optimized through the use of very low-impedance solid planes.To minimize crosstalk and noise, the ground planes are split along the boundaries between the analog and digital processing circuits. The proprietary multi-part feet each consist of a Sorbothane membrane, moulded between an inner support mounting post and an outer shell.The whole provides both suspension compliance and controlled damping.The outer shell carries a polyurethane disk which protects the surface of furniture while providing the appropriate friction to hold the unit in place during pushbutton operation. operating manual 13 welcome Digital Radio (DAB) The AV32R can be upgraded to the very latest Digital Radio (DAB) technology.This option has been jointly developed with Robert Bosch Multimedia Systems, adding the hi-performance Digital Radio capability of our internationally acclaimed tuner T32R to the AV32R. Radio Meets Television Equipped with the Digital Radio (DAB) upgrade or connected to a suitable TAG McLaren tuner the AV32R can display station name and scrolling radiotext on your television. It also allows convenient station tuning via the AV32R's on screen display. AC-3 RF Demodulator Some Laserdisks have been manufactured with Dolby Digital or AC-3 encoded sound.To play these discs you need an AC-3 RF equipped Laserdisk player and the AC-3 RF Demodulator option fitted to the AV32R.This option is not required for DVD or ordinary Laserdisks. 14 operating manual getting started We know you are keen to get your AV32R audio-visual processor working. This section will have you enjoying your favourite audiovisual experience as quickly as possible, but to obtain the optimum performance you should spend a few moments studying these instructions and the Set-up Manual. Contained within are a series of easy-to-follow steps which will have you up and running in the minimum of time. before you start Make sure that all components of your audio-visual system are disconnected from the AC supply whenever you change any connections. The AV32R is designed to run warm during normal operation. Please ensure that there is adequate ventilation above and below the unit. We recommend that you do not place your AV32R above anything that runs hot. Check that the power button is out so that power is off when you plug in(1). Using the cable supplied, connect the socket on the back of your AV32R to an AC supply outlet. For the best sound and picture quality, we recommend that you do not use multiplug adaptors. positioning power connection 1. The power button is a latching switch. One press will hold it in; the next will release it operating manual 15 source and tv connection source component connection You will need a source of audio-visual signals (such as our dvd player DVD32R, a LaserDisc player or a video recorder) to feed into your AV32R(1). As an example: connect the digital audio output of your DVD player (probably labelled `coaxial out' or `coaxial digital out') to the DIGITAL INPUT DVD(2) socket using a digital interconnect (such as our F3-10-DIG) or the analog audio outputs of a VCR (probably labelled `audio out L & R') to the ANALOG INPUT VCR sockets using an analog interconnect (such as our F3-10-ANA). Connect the video output of your source component (such as a DVD player) to either the COMPOSITE video input VCR-C (you can use our F3-10-VID interconnect for this purpose) or to the S-VIDEO input VCR-S (you can use our F3-10-SVID interconnect). In most instances an S-Video connection will give you a better picture quality than a composite connection. Please refer to the instruction manual of your source component for further details. Finally connect your TV (or projector) to the AV32R using either the COMPOSITE +OSD socket or the S-VIDEO +OSD socket. BACK BACK RIGHT LEFT SURR. made in United Kingdom DVD CD COAXIAL OUTPUT 1 DAB MD SYNC D I G I TA L I N P U T LD 2 (AC-3 RF) 5.1 BYPASS SR SL SUB C R L L L R TAPE AUX TUNER SAT VCR TV R ANALOG INPUT tv connection serial number Double insulated: When servicing, use only identical replacement parts. OUT VCR-S DVD-S OUT VCR-C TV-C + OSD LD-S S­VIDEO SAT-S + OSD LD-C SAT-C COMPOSITE 1. 2. Please refer to the Set-up Manual for details of all signal connections Throughout both instruction manuals, bold print indicates the lettering that you will find on the panels of your AV32R and the Remote Control. This manual refers to the rear panel design introduced during winter 2001. If your AV32R has the original rear panel layout then you will see small differences in the graphics and labelling 16 operating manual connecting speakers connecting your speakers The AV32R `5.1' allows for the connection of a front left, front centre, front right, surround left, surround right and a subwoofer channel. If your AV32R includes the AV32R THX Surround EX `7.1' option than there are two additional back channels: surround back left and surround back right. These back channels should be placed between the usual surround left and surround right loudspeakers. All speakers (with the exception of the subwoofer) should be arranged around your normal viewing/listening position, forming approx. a circle. Don't worry if you are unable to position your speakers at different distances from your preferred listening position, the AV32R can be set up to take account of different distances. The subwoofer can be placed almost anywhere, but we recommend you experiment to obtain the best result. After placing the loudspeakers (and connecting them to suitable power amplifiers) connect each channel to the corresponding ANALOG OUTPUT sockets at the rear of the AV32R. You can combine amplifiers from different manufacturers, the AV32R will cater for different amplifier gains. Don't worry if you don't have all speakers available; whilst you will not benefit from the full potential of surround sound, you can configure the AV32R to achieve the best result independent of most speaker shortfalls you may have in your system at this stage. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SURR. LEFT CENTRE LEFT SURR. RIGHT SUB RIGHT ANALOG OUTPUT BACK BACK RIGHT LEFT SURR. DAB MD operating manual 17 switching on/off switching on Press the power button in. The blue power LED will come on, the front panel display window will light up and a few seconds later will show `SELFTEST' and `TAG McLaren', then the software version number (such as `V3.60') and `AV32R GB-D'(1). The mute relay will click briefly(2). The AV32R has a standby mode(3), which can be entered using the standby key on the Remote Control or by pressing the mute key on the front panel for more than three seconds. The blue power LED will dim, the front panel display (and OSD) will show `going to standby' then will switch off. Normal operation may be resumed by turning the volume knob or pressing any front panel button or Remote key (other than light) at any time(4). The video outputs are still active in standby mode; this enables you to still watch your television even when the AV32R is in standby. standby standby auto balance mute tape 1. 2. 3. 4. This text can be personalised by you, see personalised message in set-up manual (GB-D stands for English - German language support). Spanish and French are also available The output is muted when the power is switched on to allow all the voltages to stabilize. This protects the internal components on your AV32R, amplifier and loudspeakers and prevents unpleasant switching noises from upsetting your listening or viewing experience The power consumption in standby mode is less than 25W The macro keys m1 to m4 will not reinstate the power unless a sequence of operations has been programmed into them. Please see the `programming the remote control' chapter for further details on how to do this. The REMOTE SELECTION keys other than av will also not reinstate the power 18 operating manual display and status screen front panel display Once the unit is ready for use (after about five seconds), the display window will show the input and processing mode which were operative last time you used the AV32R(1). sample rate decoding/processing mode video standard audio/video source name volume setting programme (2) source format status screen Pressing the ok key on the remote control will bring up a status screen which shows information about the current operation of the AV32R as shown in the example below : audio : Tuner video : TV-c mode : TMS5 volume : -30.0dB L C R balance LS RS left : 0.0 front : 0.0 Sub : 0.0 96.0k 1. 2. note: the status screen might differ from the one shown, depending on the operating mode of the AV32R The display will show station name and radiotext if your AV32R includes the Digital Radio Upgrade and the Digital Radio is selected as the current input, for details see the chapter `Digital Radio' later in this manual The programme source indicator shows the incoming sound channels if connected to a digital source, except for Dolby EX. In contrast it shows the resulting channels if an analog stereo signal is processed operating manual 19 using the AV32R remote using the AV32R remote control The AV32R is supplied with the AV32R Remote, which is a `learning' Remote Control unit. This is supplied pre-programmed for TAG McLaren home cinema products, but may easily be reprogrammed to control other devices using an infra-red remote control (such as our audio components) within your home audio and audio-visual system(1). For optimum performance from the Remote Control you must point it towards the Remote Control pick-up window on the front panel of your chosen unit(2). REMOTE SELECTION av cd dvd amp sat tv vcr ld controlling the AV32R Before controlling any particular unit with your AV32R Remote, you must first select that unit. To control the AV32R with the Remote press the av button in the REMOTE SELECTION area at the top of the AV32R Remote. This key will light briefly in red to confirm your selection. The AV32R will remain selected until another unit is chosen via the REMOTE SELECTION keys. Once the AV32R has been selected, it can be controlled in its entirety from the Remote Control. The red `Remote Control active' LED on the front panel of the AV32R will flash when commands from the AV32R Remote are received. remote active acknowledgment 1. 2. Please see the `programming the remote control' section later in this manual for further details on how to do this If you have not yet installed batteries in your AV32R Remote, then do so now. Please refer to the Set-up Manual for details on how to do this 20 operating manual using the AV32R remote using the AV32R Remote with other TAG McLaren products The AV32R Remote may be used as a master Remote Control for other TAG McLaren products, particularly for the five channel amplifier 100x5R and the dvd player DVD32R. REMOTE SELECTION av cd dvd amp sat tv vcr ld operating manual 21 selecting an analog input selecting an input To control the AV32R press the REMOTE SELECTION av key. The chosen unit will remain selected until another device is selected. Your AV32R has five analog inputs (labelled on the rear panel, from right to left: TV, VCR, SAT, TUNER, and AUX), one analog tape loop input, one 5.1 bypass input (also configurable as three stereo bypass inputs) and five digital inputs (labelled: CD, LD, DVD, MD and DAB)(1). The last-used input is re-selected when the unit is switched on and will be shown in the display window. analog inputs An analog source may be selected by pressing one of the five analog input keys on the AV32R Remote(2). Alternatively, it may be selected from the front panel by pressing the INPUT analog button once or repeatedly until the desired source is shown in the display window(3). tv vcr sat tuner aux cd ld dvd md dab INPUT analog digital video tape 1. 2. 3. 22 operating manual The DIGITAL INPUT SYNC is provided for connection to TAG McLaren digital sources equipped with the TAGtronic Sync Link in order to perfectly synchronize the digital signal. For more details see `TAGtronic Sync Link',later in this manual Or the TAPE button for the input TAPE The inputs for TV, VCR, SAT, TUNER, and AUX are all the same electrically. They are named for your convenience; the names can be re-programmed using the on-screen set-up menus. Please refer to the Set-up Manual for details selecting a digital input / tape monitor digital inputs A digital source may be selected by pressing one of the five digital input keys on the AV32R Remote. Alternatively, it may be selected from the front panel by pressing the INPUT digital button once or repeatedly until the desired source is shown in the display window(1). The selected digital source signal is automatically connected to the digital output COAXIAL OUTPUT sockets, and remains routed as such even after an analog input is selected. The sample rate indicator at the top left of the display window shows the sample rate of the digital source. When an analog source is active, it shows the sample rate used for the analog to digital conversion(2). You may listen to the analog tape monitor by pressing the tape key on the AV32R Remote or the tape button on the front panel of the AV32R. The front display will show TAPE (routed analog input) indicating that you listen to the input TAPE whilst the name in the bracket indicates the selected analog input, currently routed to the TAPE out output. The tape status LED will light. When listening to an analog source selecting the tape monitor does not change the analog source routed to TAPE out. When listening to a digital input the tape out contains a copy of the processed Left and Right audio, pressing tape will route the tape in to the tape out. Pressing either tape button or key again will restore the last selected audio source (analog or digital) as the active audio input source. 1. 2. The digital input names can be re-programmed using the on-screen set-up menus. Please refer to the Set-up Manual for details This is an indication only; you cannot change the sampling rate applied to the signals at the digital inputs as this is defined by the producer of the source material. For analog inputs it is pre-set at 20-bit/96kHz, unless Pro Logic or Pro Logic II (option) decoding is applied, in which case it is 20-bit/48kHz tv vcr sat tuner aux cd ld dvd md dab INPUT analog digital video tape sample rates tape monitor INPUT normal time display +/­ tape subtitle THX angle analog digital video tape auto detect balance mute tape operating manual 23 selecting a video input selecting a video input for routing to your tv When selecting an audio input, such as the audio signal from a VCR or DVD player, an associated video signal is automatically selected for routing to your TV. The factory-set association can be changed by the user at any time using either the Set-up Wizard or the Input Options/PSM192 sub-menu in the Change Set-up menu. INPUT The video source (composite or S-Video) may also be selected independently by pressing the VIDEO + and VIDEO ­ keys once or repeatedly on the AV32R Remote, or by pressing the INPUT video button on the front panel of the AV32R once or repeatedly, until the desired source is selected. The name of the selected video source will appear on the display for four seconds. The display will then return to show the selected audio input(1). analog + VIDEO digital video tape -- 1. You can re-program the name given to each composite or S-Video source using the on-screen set-up menus. Please the Set-up Manual for details 24 operating manual video switching automatic video standard detection composite video and S-Video sources The AV32R features automatic video standard detection of PAL and NTSC(1). This will ensure that the video system works optimally for the television system used in your country(2). There are a number of ways to connect your audio visual equipment to your television. The AV32R provides for both composite and S-Video connections. Composite video sources combine the luminance (the brightness) of the picture with the chrominance (the colour information). S-Video connections get around this problem by keeping the chrominance and luminance parts separate. The S-Video connections will in general give superior picture quality with sources which split the luminance and chrominance internally, in particular DVD players. composite video and S-Video connections The AV32R provides four S-Video inputs and four composite inputs. The S-VIDEO inputs are labelled DVD-S, VCR-S, SAT-S and LD-S, and the COMPOSITE video inputs are labelled TV-C, VCR-C, SAT-C and LD-C. If you wish to use both S-Video and composite video sources, you will need to connect both the S-Video and the composite video outputs to your television. A composite video input can only be viewed on the composite video outputs. An S-Video input can only be viewed on the S-Video outputs. It is not possible to view an 1. 2. The detected standard is shown on the left-hand side of the display window The AV32R is also compatible with the SECAM standard. However, when operating in SECAM mode, the on-screen status display may not be as clear as when used with PAL or NTSC sources. serial number Double insulated: When servicing, use only identical replacement parts. OUT VCR-S DVD-S OUT VCR-C TV-C + OSD LD-S S­VIDEO SAT-S + OSD LD-C SAT-C COMPOSITE operating manual 25 video switching S-Video input on the composite video outputs, nor can a composite video input be viewed on the S-Video outputs(1). The AV32R does not provide conversion between both signal types as this would result in degradation of the video signal. on-screen display On-screen display (OSD) is information the AV32R superimposes to your tv. The OSD can only be seen if your display is connected to a video output marked +OSD. You may find that the on-screen display appears unstable when there is no video source playing. The `Video Mode' within the `On-Screen Display' sub-menu sets the video standard for the onscreen display when there is no video input. Set this to match your display device by selecting `Video Mode' and using the or keys to cycle through the available choices. If you are unsure which Video Mode you should set, start with the standard most appropriate to the country you are in. Double insulated: When servicing, use only identical replacement parts. serial number OUT VCR-S DVD-S OUT VCR-C TV-C + OSD LD-S S­VIDEO SAT-S + OSD LD-C SAT-C COMPOSITE 1. For a detailed description of video sources and connection, please refer to the Set-up Manual 26 operating manual volume control volume control The VOLUME and mute controls alter the signal level of all connected loudspeakers. They do not affect the signal level of the ANALOG TAPE or digital COAXIAL outputs. The volume can be adjusted in a range from 0 (very quiet) to 99 (very loud) if the volume is configured to operate in `Pre-amp' mode or -90dB (very quiet) to +15dB (very loud) if you have configured the volume control for `Cinema' mode (factory setting)(1). In the Cinema mode the volume level of 0dB is the so-called `Dolby reference level' ­ i.e. the level at which a movie director intended a film to be listened(2). The `Dolby reference level' in `Preamp' mode is indicated by `ref' being shown on the OSD at a volume level of 84. VOLUME Turn the VOLUME knob clockwise to increase the volume or anticlockwise to decrease the volume in 0.5dB steps. The volume knob -operates a rotary optical encoder which gives a digital signal when it is rotated. When you reach either end of the volume range, you will still be able to rotate the knob but the display and volume will stop changing. This indicates that you have reached the upper or lower end of the volume range. You have to rotate the knob in the opposite direction to go back. Alternatively, you may use the VOL + and VOL ­ keys on the AV32R Remote to increase or decrease the volume in 0.5dB steps per key press. 1. 2. Please refer to the Set-up Manual on how to change volume control modes This setting will only be accurate if you have calibrated the volume settings using a sound level meter. Please refer to the Set-up Manual for full details. Frequently, particularly in smaller rooms, the Dolby reference level produces a volume setting which is uncomfortably high; in this case simply set the volume to the level you feel comfortable with + VOL