User manual TANDBERG STORAGELIBRARY

Copyright © 2006 Tandberg Data ASA The information contained in this document is subject to change without notice. This document contains proprietary information which is protected by copyright. All rights are reserved. No part of this document may be reproduced, modified, distributed, or translated to another language without prior written consent of Tandberg Data. Tandberg Data ASA Kjelsåsveien 161 P.O. Box 134 Kjelsås N-0411 Oslo, Norway Tel: +47 22 18 90 90 Fax: +47 22 18 95 50 www.tandberg.com This document may describe designs for which patents are pending, or have been granted. By publishing this information, Tandberg Data conveys no license under any patent or any other right. Tandberg Data shall not be liable for errors contained herein or for incidental or consequential damages (including lost profits) in connection with the furnishing, performance or use of this material whether based on warranty, contract, or other legal theory. Tandberg Data makes no representation or warranty with respect to the contents of this document and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, Tandberg Data reserves the right to revise or change this document without obligation on the part of Tandberg Data to notify any person or organization of such revision or change. Every effort has been made to acknowledge trademarks and their owners. All trademarks within this document are the property of their respective owners. Trademarked names are used solely for identification or exemplary purposes, and any omissions are unintentional. Published: May 2006 Part No.: 433599-01 ii 1 About This Guide..............................................................1 Waste Electrical and Electronic Equipment Directive .............................................................................1 Product Model Number............................................................................................................................1 Explanation of Symbols and Notes .........................................................................................................1 Other Documents You Might Need .........................................................................................................2 Getting More Information or Help ............................................................................................................2 2 Product Overview .............................................................3 Product Description .................................................................................................................................3 Tape Drive Support...........................................................................................................................3 Data Transfer Rates..........................................................................................................................4 Magazines.........................................................................................................................................4 Front Panel........................................................................................................................................4 Rear Panel ........................................................................................................................................5 Library Features ......................................................................................................................................6 Operator Interfaces ...........................................................................................................................6 ADI Bridging and Logical Unit Numbering (LUN)..............................................................................6 Partitions ...........................................................................................................................................7 Control Path ......................................................................................................................................7 I/E Station..........................................................................................................................................7 Simple Network Management Protocol (SNMP)...............................................................................7 Capacity on Demand (COD) .............................................................................................................7 Browser Requirements .....................................................................................................................8 3 Unpacking the StorageLibrary T40 ...................................9 Finding a Location for the StorageLibrary T40........................................................................................9 Unpack ..................................................................................................................................................10 4 Installing the Library .......................................................11 Remove the Transport Lock ..................................................................................................................11 Mounting the StorageLibrary T40 in a Rack..........................................................................................12 Mounting the Rack Mount Ears ......................................................................................................13 Installing the Rails in a Rack...........................................................................................................13 Installing the Left Rail Assembly .....................................................................................................14 Installing the Right Rail Assembly ..................................................................................................14 Mounting the StorageLibrary T40 to the Rack ................................................................................15 Installing the Tabletop Kit ......................................................................................................................16 StorageLibrary T40 Installation and User Guide iii Installing the Library ..............................................................................................................................16 Connecting Library Cables (SCSI)..................................................................................................16 Connecting Library Cables (Fibre Channel) ...................................................................................18 System Power-on............................................................................................................................18 Labeling Cartridges for the Barcode Reader ..................................................................................19 5 Information about the Operator Interfaces......................21 Front Panel Interface (FPI)....................................................................................................................21 Scroll Function ................................................................................................................................21 Remote Management Interface.............................................................................................................22 Menu Trees ...........................................................................................................................................22 Home Screen.........................................................................................................................................25 Operator Privileges................................................................................................................................25 Words Commonly Used on the FPI and RMI ........................................................................................26 6 Configuring the Library ...................................................29 About the Setup Wizard.........................................................................................................................29 Using the Default Administrative User Account (Administrator) .....................................................29 Using the Setup Wizard ..................................................................................................................30 Setup Wizard Tasks........................................................................................................................30 Configuring Network Settings................................................................................................................32 Remote Access...............................................................................................................................32 Applying a License Key .........................................................................................................................32 Configuring I/E Slots..............................................................................................................................33 Configuring Cleaning Slots....................................................................................................................33 Configuring Partitions ............................................................................................................................34 Creating Partitions ..........................................................................................................................34 Reconfigure Partitions.....................................................................................................................35 Changing Partition Modes...............................................................................................................35 Setting Drive ID .....................................................................................................................................36 Modifying the Control Path ....................................................................................................................37 Configuring Autoclean ...........................................................................................................................37 Configuring FPI Password.....................................................................................................................37 Configuring RMI Password....................................................................................................................38 Configuring Menu Timeout ....................................................................................................................38 Setting Date and Time...........................................................................................................................38 Configuring Barcode Scan ....................................................................................................................39 Configuring Audible Alarm.....................................................................................................................39 Configuring SNMP.................................................................................................................................39 Configuring E-mail Notification ..............................................................................................................39 7 Running the Library ........................................................41 Logging In..............................................................................................................................................41 Logging Out ...........................................................................................................................................41 Importing Cartridges ..............................................................................................................................41 Importing Cartridges via I/E Slot .....................................................................................................42 Import Cartridges via Bulk Loading of Magazines ..........................................................................42 Exporting Cartridges..............................................................................................................................43 Loading to Tape Drives .........................................................................................................................43 Unloading from Tape Drives..................................................................................................................43 Cleaning Tape Drives ............................................................................................................................44 Importing Cleaning Media ...............................................................................................................44 Exporting Cleaning Media...............................................................................................................44 Autoclean ........................................................................................................................................44 Manual Clean ..................................................................................................................................44 iv Contents Taking the Library Online/Off-line..........................................................................................................45 Taking a Library Online...................................................................................................................45 Taking a Library Off-line..................................................................................................................45 Magazine Handling................................................................................................................................45 Standby Functionality ............................................................................................................................47 8 Getting Status and Information .......................................49 Viewing Library Settings ........................................................................................................................49 Viewing Partitions/Drive Settings ..........................................................................................................49 Viewing Network Settings......................................................................................................................50 Viewing Statistics...................................................................................................................................51 Viewing Log ...........................................................................................................................................51 9 Adding, Removing and Replacing ..................................53 Power CRU............................................................................................................................................53 Removing and Replacing a Power CRU.........................................................................................53 Drive CRU .............................................................................................................................................54 Adding a Drive CRU........................................................................................................................54 Permanently Removing a Drive CRU .............................................................................................54 Removing and Replacing a Drive CRU ..........................................................................................55 10 Updating Firmware .......................................................57 Updating Library Firmware ....................................................................................................................57 Updating Drive Firmware.......................................................................................................................58 11 Working With Cartridges and Barcodes........................59 Handling Cartridges Properly ................................................................................................................59 Write-Protecting Cartridges ...................................................................................................................60 Barcode Requirements..........................................................................................................................60 Installing Barcode Labels ......................................................................................................................60 12 Troubleshooting............................................................61 About RAS Tickets ................................................................................................................................61 Viewing RAS Tickets.......................................................................................................................61 Supported RAS Tickets...................................................................................................................62 Interpreting LEDs...................................................................................................................................63 The Maintenance Menus ................................................................................................................63 The Diagnostics Menu ....................................................................................................................64 Verifying Hardware ................................................................................................................................64 Software Checking ................................................................................................................................64 Verifying Recent Changes.....................................................................................................................64 Troubleshooting Matrix ..........................................................................................................................65 13 Shipping or Transporting StorageLibrary T40 .................71 Reinserting the Transport Lock .............................................................................................................71 Packing the StorageLibrary T40............................................................................................................72 StorageLibrary T40 Installation and User Guide v 14 Specifications ...............................................................73 Library Dimensions................................................................................................................................74 Library Component Weights..................................................................................................................74 Power Requirements .............................................................................................................................74 Climatic Specifications...........................................................................................................................75 15 Safety and Regulatory Information ...............................77 Safety Approvals ...................................................................................................................................77 EMC Approvals......................................................................................................................................77 Europe.............................................................................................................................................77 USA.................................................................................................................................................77 Japan ..............................................................................................................................................78 Canada............................................................................................................................................78 Conformity Declarations ........................................................................................................................78 Europe.............................................................................................................................................78 Australia/New Zealand....................................................................................................................78 vi Contents Figure 1 Front Panel of the StorageLibrary T40......................................................................................4 Figure 2 Rear Panel of the StorageLibrary T40 with 1 Full Height SCSI Drive Installed. .......................5 Figure 3 Robotics Locking Screws Marked with Red Plastic Tabs .......................................................11 Figure 4 Recommended Storage of Transport Locking Screws ...........................................................12 Figure 5 Rack Mounting Kit with Rack Mount Ears (Right figure).........................................................13 Figure 6 Mounting the Rack Mount Ears...............................................................................................13 Figure 7 Rack Mount Rail ......................................................................................................................14 Figure 8 Mounting the Rack Mounting Kit to a Rack.............................................................................14 Figure 9 StorageLibrary T40 Mounted in a Rack, Front View. ..............................................................15 Figure 10 StorageLibrary T40 Mounted in a Rack, Rear View. ............................................................15 Figure 11 StorageLibrary T40 Cabling (SCSI) ......................................................................................16 Figure 12 StorageLibrary T40 Cabling (Fibre Channel) ........................................................................18 Figure 14 Front Panel Interface Menu Tree ..........................................................................................23 Figure 15 Remote Management Interface Menu Tree ..........................................................................24 Figure 16 RMI Home Screen.................................................................................................................25 Figure 17 Removing the Magazine from the Library .............................................................................46 Figure 18 Gently Push the Cartridge into the Magazine Slot ................................................................46 Figure 19 Push the Release Knob towards the Cartridge to Eject the Cartridge from the Slot ............46 Figure 20 Push Magazine until It Clicks into Place ...............................................................................47 Figure 21 The Release Tool Inserted into the Correct Hole on the Left Lower Magazine....................47 Figure 22 Replacing a Power CRU .......................................................................................................54 Figure 23 Adding, Removing or Replacing a Drive CRU ......................................................................56 Figure 24 Magazine Lock Marked with Red Plastic Tab .......................................................................71 StorageLibrary T40 Installation and User Guide vii Table 1 Data Transfer Rates ...................................................................................................................4 Table 2 Commonly Used Word on FPI and RMI...................................................................................26 Table 3 Cartridge Present Symbols on FPI During Inventory and in the Maps Menu ..........................27 Table 4 Supported RAS Tickets ............................................................................................................62 Table 5 Maintenance Menus - Item Name and Description ..................................................................63 Table 6 Diagnostics Menu - Item Name and Description......................................................................64 Table 7 Troubleshooting Matrix ­ Power with Solution .........................................................................65 Table 8 Troubleshooting Matrix ­ Cartridge Movement with Solution ..................................................66 Table 9 Troubleshooting Matrix ­ Media with Solution .........................................................................67 Table 10 Troubleshooting Matrix ­ SCSI with Solution.........................................................................68 Table 11 Troubleshooting Matrix ­ Library Performance with Solution ................................................68 Table 12 Troubleshooting Matrix ­ Cleaning with Solution ...................................................................69 Table 13 Troubleshooting Matrix ­ Write or Read Issues with Solution ...............................................69 Table 14 Troubleshooting Matrix LED Error Messages with Solution...................................................69 Table 15 Troubleshooting Matrix ­ Errors Displayed on Front Panel with Solution..............................70 Table 16 Troubleshooting Matrix ­ Remote Management with Solution ..............................................70 Table 17 Troubleshooting Matrix ­ Forgot Password with Solution......................................................70 Table 18 Library Specification Summary...............................................................................................73 Table 19 Library Dimensions.................................................................................................................74 Table 20 Library Component Weight.....................................................................................................74 Table 21 Power Requirements..............................................................................................................74 Table 22 Temperature Range ...............................................................................................................75 Table 23 Humidity Range......................................................................................................................75 Table 24 Altitude Range ........................................................................................................................75 viii Contents 1 About This Guide This guide contains information and instructions necessary for the normal operation and management of the StorageLibrary T40. This guide is intended for anyone interested in learning about or anyone that needs to know how to install, configure, and operate the StorageLibrary T40. Be aware that Administrator level privileges are required to configure many of the features described in this guide. Note Be sure to read all operating instructions in this manual before operating this product. Additional safety information is also included in Safety and Regulatory Information. Waste Electrical and Electronic Equipment Directive This product contains materials that are recyclable under the Waste Electrical and Electronic Equipment (WEEE) directive of the European Union. This product should not be disposed of as unsorted municipal waste. Product Model Number The Tandberg StorageLibrary T40 model number is as follows: 1040. Explanation of Symbols and Notes The following symbols appear throughout this document to highlight important information. Caution Indicates a situation that may cause possible damage to equipment, loss of data, or interference with other equipment. Warning Indicates a potentially hazardous situation which, if not avoided, could result in death or bodily injury. StorageLibrary T40 Installation and User Guide 1 Note Indicates information that helps you make better use of your system. Other Documents You Might Need The following documents are also available for this product. These documents can be found at www.tandberg.com/manuals: SCSI Functional Specification, StorageLibrary T40 (433489) provides the SCSI interface specification for the Tandberg Data StorageLibrary T40. Quick Installation Guide, StorageLibrary T40 (433559) gives you an overview of how to install the library. Customer Replaceable Unit (CRU) Tape Drive Instruction:, StorageLibrary T40 (433601) Customer Replaceable Unit (CRU) Power Supply Instruction:, StorageLibrary T40 (433602) StorageLibrary T40 Table Top Installation Sheet (433604) Getting More Information or Help For further assistance please visit our web at www.tandberg.com or contact these regional locations: International Headquarter Tandberg Data ASA, Kjelsåsveien 161 P.O. Box 134 Kjelsås, N-0411 Oslo, Norway e-mail: support@tandberg.com Tel: +47 22 18 90 90, Fax: +47 22 18 95 50 Other locations: Europe: Tel.: 00800 826 323 74 - (00800 TANDBERG) e-mail: support-de@tandberg.com Asia Pacific: Tel.: +65 6396 0786 email: support@tandberg.com.sg Americas: Tel.: +1 858 726 1800 e-mail: support-us@tandberg.com 2 About This Guide 2 Product Overview Tandberg Data StorageLibrary T40 is a compact tape cartridge library designed for secure, reliable, unattended system backup. The library can be mounted in a 19" rack or used as a tabletop unit. The height of the rackmount version is 4U. The library supports IBM LT03 SCSI and Fiber Channel full height drives and Tandberg LT02 SCSI half height drives. The library has 40 physical tape slots installed. The StorageLibrary T40 has several features designed to increase the product's ease of use and utility, such as: Four removable magazines allow easy management of data sets or archival storage. There are no hidden slots A menu-driven operator control panel interface with backlit LCD provides easy control for configuration and diagnostic activities Remote management to the library via a remote management interface Menu Wizards for simplified library configuration Integrated Barcode Reader Support for both SCSI/LVD and Fiber Channel Tape Drives On-board Diagnostics for diagnostics and fault analysis Standby functionality for power savings Customer replaceable tape drives and power supply Customer upgradeable by adding tape drives and cartridge slots Caution Review the Caution at the beginning of chapter Unpacking the StorageLibrary T40 before you power up the unit for the first time. Product Description Tape Drive Support For additional specification information for this model, see Specifications. StorageLibrary T40 supports Linear Tape Open 3 (LTO-3) SCSI and Fibre Channel tape drives and LTO2 SCSI tape drives. The library supports 1-2 full height drives and 1-4 half height drives. The library supports both StorageLibrary T40 Installation and User Guide 3 Fibre Channel and SCSI tape drive interfaces within the same library. LTO Fibre Channel tape drives can be directly attached to hosts or the SAN. LTO SCSI tape drives are attached directly to the host. Tape drives are installed into tape drive bays in the rear of the library. If a tape drive bay is empty, a cover plate covers the empty tape drive bay to prevent debris from entering the library. Tape drives can be installed in any available tape drive bay. Data Transfer Rates Table 1 Data Transfer Rates StorageLibrary T40 LTO3 SCSI LTO3 FC LTO2 Maximum Sustained Rate, Native 80MB/s 80MB/s 24MB/s Maximum Sustained Rate, Compressed 160MB/s 160MB/s 48MB/s Magazines The library is equipped with four removable magazines all accessible from the front of the unit. The lower magazines hold 12 cartridges each and the two upper magazines hold 8 cartridges each. There are no hidden slots. To cool the library there are air inlet holes on the bezels. For easy removal of the magazines, use handles on the sides of the bezels. For details on magazine handling, see the section Magazine Handling. Front Panel The Front Panel includes the Operator control panel with LCD display, four control buttons, two LED indicators and a standby switch. The bezels of the four magazines are also visible from the front. Figure 1 Front Panel of the StorageLibrary T40 LCD ­ Liquid Crystal Display The display is a backlit 128 x 68, dot-matrix graphical display that can show 8 lines of 20 characters. In various modes of operation, the display panel screens and control buttons allow you to do the following: Enter settings for StorageLibrary T40 configuration Issue operational commands View StorageLibrary T40 status and information Test StorageLibrary T40 functionality 4 Product Overview Control Buttons The labels for the four control buttons are displayed in the corners of the LCD. All buttons have "soft function" for different modes of operation, i.e. the functions of the buttons change during different activities. The actual function for each button is always visible on the display. LED Indicators The two LED indicators are green and amber. They indicate the StorageLibrary T40 activity as follows: Green LED on: The StorageLibrary T40 is either running or ready for operation Green LED blinking: Short blinks followed by long intervals indicate that the library is in low power standby mode Amber LED on: Fault LED; the StorageLibrary T40 has encountered an electrical or mechanical failure Standby Switch A switch on the front panel provides a Library Standby. If the switch is pushed when the library is active, the library completes the current operation and then goes off-line and enters standby mode. See Standby Functionality for more details. Rear Panel The figure below shows the rear panel of the StorageLibrary T40. Figure 2 Rear Panel of the StorageLibrary T40 with 1 Full Height SCSI Drive Installed. Power CRU with fans Back panel cover plates Cooling fans Ethernet connector Main power switch, power outlet and fuse Drive CRU SCSI with fan connectors Emergency eject tool. Behind, RTC battery and drive power extension cable Cooling Fans Forced-air cooling fans are integrated in both the power CRU, the drive CRUs and behind the library control board. The fans draw air inward through holes in the front bezels and expel it out in the back. The fans start whenever the drive is operating or when the internal temperature in the StorageLibrary T40 gets too high. StorageLibrary T40 Installation and User Guide 5 Main Power Switch/ Fuse/Power Cord Connection The main power switch is located at the rear of the library on the power supply bracket. The power switch, the fuse holder (with a 250V 2A fuse) and the AC power cord connection are combined in one common unit. SCSI and Fiber Channel Interface Connectors The library supports both SCSI and FC drives. The SCSI drive CRU has two shielded 68-pin HD SCSI connectors on the rear panel and the FC CRU has one FC connector. The connectors are used for connecting the tape drive and the StorageLibrary T40 to the host. These connectors can link to the following: A shielded male HD68 SCSI cable A shielded male HD68 SCSI terminator FC port cable Ethernet Port This port is for the Remote Management system and allows you to connect the StorageLibrary T40 to a 10 BaseT compatible Ethernet network. Battery Holder The battery for the real time clock is located behind a plate at the rear of the library. A drive power extension cable is found in the same location. Back Panel Cover plate If a drive bay is empty a cover plate covers the opening to prevent dust from entering the library. Library Features This section describes several features of the StorageLibrary T40. Operator Interfaces The front panel is located on the front of the library and allows users to work locally on the library via the Operator interface. The remote management interface allows users to view and perform library functions from remote sites and is accessible through a browser. The front panel and remote management interfaces contain a similar Operator interface and functionality. For more information about the front panel and the web interface, see Information about the Operator Interfaces. ADI Bridging and Logical Unit Numbering (LUN) The StorageLibrary T40 implements ADI bridging with LUN addressing. This means that the library controller does not have its own host interface, but SCSI commands to the library controller are sent via one of the installed tape drives. The tape drive and the library controller will have a common SCSI ID but different LUN numbers. The SCSI commands to/from the library controller are sent via the tape drive's ADI port. The purpose of the LUN interface is to eliminate the requirement for a host interface on the library controller board. 6 Product Overview Partitions Partitions are virtual sections within a library that present the appearance of multiple, separate libraries for purposes of file management, access by multiple Operators, or dedication to one or more host applications. Organizing the library into partitions divides the resources into virtual sections. If one of the resources is not available due to a failure or other cause, the other partitions and their assigned components are still available. The StorageLibrary T40 can be divided into a maximum of four partitions. At least one tape drive and one magazine must be assigned to each partition. The robotics, the import/export slots and the cleaning slots are common resources to all partitions. For more information on partitions, see Configuring Partitions. Control Path The "control path" tape drive is used to connect a partition to a host application. Only one tape drive can be selected as the control path at one time. By default, the first tape drive assigned to a partition is designated the control path. In the event that the control path connection to the host application fails, you can select a new control path for the partition. I/E Station I/E station enables importing and exporting cartridges without interrupting normal library operations. I/E station slots are located in either the lower left or the upper left magazine. The number of I/E slots for the 40 slot library is user settable to 0 (none), 3 or 8. The number of I/E slots for the 24 slot library is user settable to 0 (none) or 3. The I/E slots are shared among all partitions. When a cartridge in an I/E slot is assigned to a partition, only that partition can access that I/E slot. Access to the I/E slot is managed through the front panel interface only. Simple Network Management Protocol (SNMP) The StorageLibrary T40 supports system monitoring via SNMP and SNMP Notifications. Capacity on Demand (COD) In StorageLibrary T40 libraries, LTO storage slots are licensed for use. At any time, Capacity on Demand (COD) allows you to enable the unused storage slots within a library via an electronic license key. The StorageLibrary T40 comes with 24 or 40 slots (two lower magazines) A StorageLibrary T40 with 24 slots can later be upgraded to 40 slots purchasing the Capacity On Demand (COD) license key Details about the COD license key: The license key does not expire Once a license key is installed it cannot be removed The COD license key can be purchased as any other product from Tandberg Data. To see your library's current configuration and slot availability, open the home screen of the remote management interface. Once you receive the license key, enter it via the front panel of the library. When the license key is entered, the total number of available slots in the library increases. StorageLibrary T40 Installation and User Guide 7 Browser Requirements The supported browsers include: FirefoxTM version 1.0.6 and above Internet ExplorerTM version 6.0 and above 8 Product Overview 3 Unpacking the StorageLibrary T40 This chapter provides detailed information for preparing the library location. Caution After the library is unpacked it needs to acclimate for 8 hours before the power is turned on. Caution Keep original packaging! The StorageLibrary T40 must only be shipped in original packaging in order to keep warranty. Finding a Location for the StorageLibrary T40 The StorageLibrary T40 must be positioned in a stable location The StorageLibrary T40 is designed to operate in a horizontal position. Do not attempt to operate the StorageLibrary T40 in any other position than horizontally Make sure a power source is available Route any cable to avoid walking on them or pinching them with items placed on or against them. Pay particular attention to the cord at the wall receptacle, and the point where the cord exits from the StorageLibrary T40 Make sure that object will not fall and liquids will not spill into the StorageLibrary T40's chassis openings Make sure the airflow around the front and back of the StorageLibrary T40 is not obstructed Make sure there is a minimum of 60cm free space in front of the unit to allow the operator to safely remove the magazines Make sure the display and operator controls can easily be accessed Make sure the StorageLibrary T40 is away from the floor and in a clean environment with temperatures within specifications. See Specifications StorageLibrary T40 Installation and User Guide 9 Unpack Caution You must remove the Robot Transport Locks when powering up the unit for the first time or it will not operate. See the procedure in section Remove the Transport Lock. To unpack the StorageLibrary T40, follow the instructions below. Carefully unpack the unit from the shipping container. Save the container and packing materials in case you need to transport the StorageLibrary T40 in the future. The packaging is specifically designed for the library to ensure it is not damaged during transportation. The StorageLibrary T40 is designed to fill the weight requirements for one person to lift only when drives, power and magazines are removed before lifting the StorageLibrary T40. However it is recommended that two persons lift the StorageLibrary T40 for absolute safety. Review the contents of the shipping container to be sure that all parts were included in the shipment and no parts are damaged. A standard package for the StorageLibrary T40 consists of the following items: A factory-assembled StorageLibrary T40 unit containing four cartridge magazines A Standard Accessory Kit containing: Printed copy of the Quick Installation Guide 1 Warranty/Registration Information Rack Mounting Kit 2 Line Power Cords: one for USA/Japan and one for European power outlets 1 Ethernet cable Media barcode label kit (contains media labels and cleaning cartridge labels) There will be variations of this list. Depending on the number of drives in your library and whether or not your library is equipped with SCSI or FC drives, the accessory kit may contain a terminator and SCSI cable. The StorageLibrary T40 accessory kit contains no cartridges. Complete product registration online at www.tandberg.com/csc. 10 Unpacking the StorageLibrary T40 4 Installing the Library This chapter provides detailed information for installing the library hardware. For basic library cabling instructions, refer to the Quick Installation Guide. Remove the Transport Lock To protect the library during transport four transport screws hold the robotics in a locked position. The screws are marked with red plastic tabs protruding between the magazines and the front panel. Caution The locking screws must be removed before the StorageLibrary T40 can operate normally. Figure 3 Robotics Locking Screws Marked with Red Plastic Tabs The locking screws will be detected when the StorageLibrary T40 is powered on. To remove the screws follow the instructions below: 1 2 3 Connect the power cord to the power connector on rear of the library Turn on the power switch on the rear of the library The library detects that the transport screws are present. Follow the instructions on the front panel display to remove the magazines to get access to the screws. Remove the screws and reinsert the magazines The library will now continue its power-on sequence. StorageLibrary T40 Installation and User Guide 11 Note Keep the locking screws in a safe place. You will need them to lock the robotics if you need to return your StorageLibrary T40 for service or repair. Caution The warranty does not cover damage to the library if transported without the locking screws properly installed. See Reinserting the Transport Lock for instructions on how to reinstall the transport lock. Figure 4 Recommended Storage of Transport Locking Screws If the library is to be mounted in a rack, this is the time to mount the rackmount ears to the library. See instructions in section Mounting the StorageLibrary T40 in a Rack. Mounting the StorageLibrary T40 in a Rack The StorageLibrary T40 is designed for use in a 19" rack system using 4U of rack space. The length of the power cord and the primary interface cables restrict the placement. The StorageLibrary T40 is designed to operate in a horizontal position. Do not attempt to operate the StorageLibrary T40 in any other position than horizontally. Also make sure that: The airflow around the front and back of the StorageLibrary T40 is not obstructed There is a minimum of 60cm free space in front of the unit to allow the operator to safely remove the magazines The display and operator controls can easily be accessed The StorageLibrary T40 is away from the floor and in a clean environment with temperatures within specifications. For specifications and safety information, see Specifications and Safety and Regulatory Information The Rack Mounting Kit includes the following items: Rack Mount Ears (2 ears and 8 screws M3x4) Left Rail Assembly Right Rail Assembly Screw M6x12 (6 pieces) Recommended mounting tools: Folding rule or tape measure Screwdriver 7 mm open-end wrench 12 Installing the Library