» LA-322 WARNING To avoid electric shock or other accidents, be sure to refer the installation of the LA-322 to qualified service personnel. The user should not attempt its installation. In no event shall TASCAM/TEAC be liable for any consequential accidents, damages both personal and material, or any other troubles caused by breach of this warning. The LA-322 is a balanced XLR-type connector assembly designed for the TASCAM 322 Double Auto Reverse Cassette Deck, allowing balanced input/output. Mounting procedure 1Remove the deck's cover by removing nine screws. 2Remove the deck's two blanking panels by removng the screws (six screws for each). 3Remove the following three connectors. [Refer to Fig. 1.] 1. Connector (2-pin to 2-pin) connecting P808 and P809 on the AN_SW PCB 2. Connector (4-pin) at P 12 on the main PCB 3. Connector (3-pin) at P 14 on the main PCB P809 P808 _ AN SW PC B DE CK O 1/C MM ON M A DE CK 2 IN PC B P12 P14 Fig. 1 » blue/white line at B. LA-322 4There are two LA-322 units: One is for DECK 1/COMMON and the other is for DECK 2. LA-322 for DECK 1/COMMON is the one with the LA-322 for DECK 2 is the one with the red/white line at B. 5Referring to Fig. 2, connect wires through the rear panel. 6Mount each LA-322 to 322 using the screws removed in ­ step 2. ­ Keep the screws and the blanking panels removed from the 322 earlier, for possible future use. P809 P808 P810 _ AN SW PC B DE CK O 1/C MM ON To P12, P13, P14 DE C K2 To P808, P809, P810 B P15(White) P16 (Red) M A B IN PC B Blue:1, White:2 To P15 A OU T PU IN TP UT A OU T PU IN TP UT LA-322 P12 P14 P13 Red:1, White:2 To P16 LA-322 Fig. 2 TEAC CORPORATION ...