7733 Telegraph Road Montebello, CA 90640 Phone 323-726-0303 Fax 323-727-7632 Product Information MOXA Software Installation Instructions · CD-ROM Software If your MOXA kit came with a CD-ROM instead of the "Device Driver" diskette, insert the CD-ROM and a blank floppy disk into the appropriate drives of your computer. From the Windows 95/98 "Start" menu, select "Run" and then "Browse". From the "Look in:" pop-down menu select "MOXA_SOFTWARE". Double-click on the "MAKEDISK.EXE" icon. Once your diskette has been created, continue with the instructions in the Automation manual (Sec. 2.4 step #2, after the first sentence). Here's an alternate method that just uses the CD-ROM. 1. Insert the MOXA CD-ROM 2. Open Windows Explorer 3. Press the "+" to the left of "MOXA_SOFTWARE" 4. Press the "+" to the left of "DRIVERS" 5. Double-click on the "WIN95" folder (this also works for Windows '98) 6. On the right side of the Explorer screen, double-click on the "INDUSTIO" folder. 7. Double-click on the "Setup95.EXE" icon .......................... ...