® Portable USB CD-RW Drive CD-W28PU User's manual To ensure the smooth handling of your warranty please write the serial number of your drive into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative. · Changes in specifications and features may be made without notice or obligation. · · · · Copyright © 2001, TEAC Corporation Ltd. All rights reserved. First edition: October 2001 Company and product names provided herein are trademarks of their respective companies. Windows 98 Second Edition, Windows Me, and Windows 2000 are registered trademarks of Microsoft Corporation in the U.S. Just Link is a trademark of Ricoh Co., Ltd. CONTENTS TO THE USER ................................................................................ 53 PRECAUTIONS .............................................................................. 53 SOFTWARE LICENCE AGREEMENT AND LIMITED WARRANTY ................................................................................... 54 1. BEFORE USING ......................................................................... 1.1 Computers to connect .......................................................... 1.2 Conforming OSes (as of October in 2001) .......................... 1.3 Checking the USB controller ................................................ 1.4 Writing media and writing speed .......................................... 2. PRODUCT OUTLINE .................................................................. 2.1 Procedure before using the CD-W28PU .............................. 2.2 Precautions when unpacking the package .......................... 2.3 Package List ......................................................................... 56 56 57 57 59 61 62 62 63 3. PRECAUTIONS FOR SETTING AND HANDLING ..................... 64 4. NAMES AND FUNCTIONS ......................................................... 66 5. SETTING UP THE CD-W28PU ................................................... 5.1 Cable connection ................................................................. 5.2 Driver installation under Windows 98SE .............................. 5.3 Driver un-installation in Windows 98SE ............................... 5.4 Driver installation under Windows Me .................................. 5.5 Driver installation Windows 2000 ......................................... 6. SYSTEM RECOVERY PROCEDURE ......................................... 6.1 System recovery of Windows 98SE ..................................... 6.2 System recovery of Windows ME ........................................ 6.3 System recovery of Windows 2000 and Windows XP .......... 69 69 70 73 75 76 77 77 79 82 Contents 51 ENGLISH 7. OPERATION ................................................................................ 7.1 Precautions in handling the media ....................................... 7.2 Connection ........................................................................... 7.3 Disconnection ...................................................................... 7.4 Setting the media ................................................................. 7.5 Ejecting the media ............................................................... 7.6 Playing back the audio CD ................................................... 7.7 Suspend/resume .................................................................. 83 83 85 85 87 87 88 90 ENGLISH 8. DAILY MAINTENANCE ............................................................... 90 Cleaning the drive ...................................................................... 90 9. SUPPORT AND SERVICE .......................................................... 9.1 Warranty period .................................................................... 9.2 Requests for repair ............................................................... 9.3 Technical Service Depots (Europe) ...................................... 91 91 91 92 10. SPECIFICATION ....................................................................... 93 10.1 General specification ......................................................... 93 10.2 Functional specification ...................................................... 94 WARRANTY ................................................................................... 95 52 Contents TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to VCCI Rules. Although this device is designed to be used in a home environment, it may cause interference if used near a radio or TV receiver. Be sure to handle the device properly in accordance with this instruction manual. PRECAUTIONS · While reasonable efforts have been made in the preparation of this product and this document to assure accuracy, contact TEAC Corporation if there is any doubt or error in this document. Note however that TEAC Corporation may not assume responsibility for the support or results of the above. TEAC Corporation assumes no responsibility for data loss caused by the operation that is not in accordance to this document, or data loss caused by natural disaster, fire, power outage, or spontaneous defect of this product. The product and the material in this document are subject to change toward improvement without notice. No part of this document may be reproduced without the prior written consent of TEAC Corporation. The contents in this document are written based on information as of October 2001. · · · · To the User 53 ENGLISH SOFTWARE LICENCE AGREEMENT AND LIMITED WARRANTY ENGLISH DEVICE DRIVER FOR TEAC CD-R/RW UNIT LICENSE AGREEMENT AND LIMITED WARRANTY IMPORTANT: PLEASE CAREFULLY READ THE LICENSE AGREEMENT HEREIN BEFORE USING THE ENCLOSED DEVICE DRIVER SOFTWARE (INCLUDING PROGRAMS AND ALL RELATED MATERIALS, "SOFTWARE") FOR THE TEAC CD-R/RW UNIT ("EQUIPMENT"). THE RIGHT TO USE THE SOFTWARE IS GRANTED ONLY ON THE CONDITION THAT YOU AGREE TO THE LICENSE AGREEMENT.YOUR USE OF THE SOFTWARE SHALL BE DEEMED THAT YOU AGREE TO THE LICENSE AGREEMENT. This License Agreement with limited warranty is a legal agreement you (either an individual or a single entity) and TEAC Corporation ("TEAC") for the SOFTWARE, which include computer software and electronic documentation. 1. GRANT OF LICENSE. TEAC grants to you the right to use the SOFTWARE only for the EQUIPMENT you have ("YOUR EQUIPMENT"). 2. COPYRIGHT. All title and copyrights in and to the SOFTWARE and any copies thereof are owned by TEAC or a supplier to TEAC. The SOFTWARE is protected by Japanese copyright laws, international treaty provisions, and all other applicable national laws. 3. RESTRICTIONS. You may not distribute copies of the SOFTWARE to third parties. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that applicable law notwithstanding this limitation expressly permits such activity. You may not rent or lease the SOFTWARE. You may not reproduce the SOFTWARE except for archival purpose. You must prominently mark the same copyright notice on your archival 54 Software Licence Agreement and Limites Warranty file that TEAC marks on the media of the SOFTWARE. Provided, however, that you may permanently transfer all of your rights under this Agreement only in conjunction with a permanent transfer of YOUR EQUIPMENT, SOFTWARE and any copies thereof. 4. TERMINATION. Your rights under this Agreement terminate upon the disposal of all copies of the SOFTWARE, or without prejudice to any other rights, TEAC may terminate this Agreement if you fail to comply with the terms and conditions of this Agreement. In such event, you must destroy all copies of the SOFTWARE. 5. LIMITED WARRANTY. TEAC warrants that the SOFTWARE will be usable for the purpose expressed on TEAC's document when properly installed on a computer under allowable circumstances, including OS, CPU, I/F, cable, etc. Your remedy and TEAC's obligation under this limited warranty shall be limited to replacement or rectification of the defective SOFTWARE. TEAC does not warrant that the operation of the SOFTWARE will be uninterrupted or error free. Any and all implied warranties or conditions with respect to the SOFTWARE, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, HEREBY ARE EXCLUDED. 6. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TEAC BE LIABLE FOR ANY SPECIAL INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF TEAC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY EVENT, TEAC'S LIABILITY TO YOU SHALL NOT EXCEED YOUR PURCHASE PRICE FOR YOUR EQUIPMENT. BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. 7. MISCELLANEOUS. This Agreement is governed by the laws of Japan. Software Licence Agreement and Limites Warranty 55 ENGLISH 1. BEFORE USING Thank you for purchasing TEAC USB Portable CD-R/RW unit CDW28PU. This is a CD-R/RW drive that is used by connecting it to the USB terminal of a personal computer. The drive functions as a device conforming to the USB1.1 when connected to the USB1.1 terminal and as a device conforming to the USB2.0 when connected to the USB2.0 terminal. A floppy disk drive may be required for installing software when using this drive. This user's manual describes how to set the CD-W28PU, how to connect it to a personal computer, and how to operate it. Read the instruction manual of your computer as well. Read the user's manual provided with each software to understand how to use it. Read this instruction manual carefully before use for proper handling and operations of the CD-W28PU. ENGLISH 1.1 Computers to connect · A PC/AT compatible machine with a USB1.1 or USB2.0 interface · · · (two or more USB connectors are required when using the USB floppy disk drive for system recovery) CPU of Intel Pentium II 266MHz or more Main memory of 64MB or more Free hard drive space of approx. 800MB or more when writing to the CD-R or CD-RW disc. ­ The USB control conforms to one of the following: UHCI (Universal Host Controller Interface), OHCI (Open Host Controller Interface) or EHCI(Enhanced Host Controller Interface) of the USB 2.0. The drive may not operate with some USB interfaces that conform to the OHCI. 56 1. Before Using ­ Your PC must conform to a boot from the USB CD-ROM in order to start from a bootable CD-ROM including a recovery CD using the drive. ­ It is recommended that you create a boot disk in advance taking into consideration the re-installation (described in System Recovery Procedure) of your OS. ­ Refer to the TEAC homepage for the latest information on the operational conformity. 1.2 Conforming OSes (as of October in 2001) Any one of the following operating systems is required. · Microsoft® Windows 98 Second Edition · Microsoft® Windows Me · Microsoft® Windows 2000 Professional · Microsoft® Windows XP · The drive does not conform to Windows 95, Windows 98 and MSDOS. 1.3 Checking the USB controller To use the CD-W28PU in your computer, the USB controller incorporated in the computer must be operating normally. Execute the following steps to check the operation state of the USB controller. In Windows 98SE or Windows Me 1. Click Start, Settings, Control Panel. 2. Double-click System. In Windows Me, System may not appear in the Control Panel. In that case, left-click Display all the Control Panel options to display it. 1. Before Using 57 ENGLISH ENGLISH 3. Click the Device Manager tab. Confirm that USB (Universal Serial Bus) Controller exists in the device list. The name of the USB controller depends on the PC used (the figure below represents a USB controller provided by Intel). In Windows 2000 1. Click Start, Settings, Control Panel. 2. Double-click System. 3. Click the Hardware tab. 4. Click the Device Manger (D)... button. 5. Confirm that USB (Universal Serial Bus) Controller exists in the device list. 58 1. Before Using 1.4 Writing media and writing speed ENGLISH T Writing speed to the media The conforming writing speed is indicated on the package of the CDR/RW media. When writing, write within the scope of the specified writing speed of the media used. T CD-R media and writing speed Data can be appended to the CD-R disc once or up to a maximum of approx. 100 times. The data written cannot be erased, however, it has a wide range of compatibility that allows read by most CD-ROM drives or CD players. Writing speed: 2x, 4x, 8x There is no problem in using a med ...