® Portable CD-ROM Drive CD-224PEK User's manual User's Manual Manuel Manuale Manual Manual Ðóêîâîäñòâî ê ýêñïëóàòàöèè To ensure the smooth handling of your warranty please write the serial number of your drive into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative. CONTENTS INTRODUCTION ............................................................................ 24 1. TO THE USER ............................................................................ 1.1 Handling Disks ..................................................................... 1.2 Handling the Portable Drive CD ........................................... 1.3 Inserting/Removing Disks .................................................... 1.4 Daily Maintenance ............................................................... 24 24 25 25 26 2. BEFORE USING ......................................................................... 28 2.1 Checking the Components ................................................... 28 2.2 Operating Environment ........................................................ 29 3. NAMES AND FUNCTIONS ......................................................... 30 4. INSTALLATION ............................................................................ 4.1 Connecting the PCMCIA card to the TEAC CD-224PE ....... 4.2 Connecting the PCMCIA card to a Notebook-PC ................ 4.3 Important instructions for Users of Windows95/98 ............. 4.4 Important Instructions for Users of Windows NT 4.0 .......... 4.5. Important Instructions for Users of Win 3.1/MS-DOS ......... 32 32 33 34 34 35 5. SPECIFICATION ......................................................................... 36 WARRANTY ................................................................................... 37 · Changes in specifications and features may be made without notice or obligation. · · Copyright © 1999, 2000, TEAC Corporation Ltd. All rights reserved. Second Edition: April 2000 Company and product names provided herein are trademarks of their respective companies. Contents 23 ENGLISH INTRODUCTION The TEAC CD-224PE is a world class high performance portable CDROM drive kit. With this drive you have bought one of the most powerful portable CD products on the market. ENGLISH 1. TO THE USER 1.1 Handling Disks · Do not place the disc in direct sunlight or expose it to moisture and extreme temperatures. Never leave the disc in a closed car during summer season. · Remove the disk by holding the outer edge of the disk while pressing down its center. Store the disc in a case after use. · When the data side of the CD is stained with fingerprints or dust, wipe the CD softly using a soft cloth or optional CD cleaning kit from its center to outward. · Do not use any household cleaning fluids, benzene, thinner, or antistatic agents as it may blemish the surface of the disk. 24 Indroduction 1.2 Handling the Portable Drive CD · Do not use a cracked or deformed disc. · Wipe the stain on the unit off using a cloth damp with diluted neutral detergent. Do not apply solvents such as alcohol, benzene, or thinner as it may blemish the surface of the unit. · When the unit is moved from a cool place to a warm place or when a cool room is warmed rapidly, condensation occurs on the internal lens which prevents the normal operation. In that case, remove the disc and leave the unit for about an hour before use. 1.3 Inserting/Removing Disks · Place the disc on the center disc table with the label side upward and press the disc lightly. · Remove the disc by lifting the edge of the disc while lightly pressing down the center of the disc. 1. To the User 25 ENGLISH · Do not touch the pickup lens. Clean the stained lens using a blower for camera lenses (commercially available). Always keep the cover of the unit closed except when inserting or removing the disc. 1.4 Daily Maintenance (1) Wipe the surface of the drive using a soft cloth. Use a cloth damp with diluted neutral detergent for heavy stains. ENGLISH (2) When a sound is skipped or data cannot be read while using the drive, wipe the CD softly using a soft cloth from its center to outward. 26 1. To the User (3) When stains cannot be removed, use the optionally provided cleaning kit or a cloth damp with water or neutral detergent. The lens may also be cleaned using a blower for camera lenses (commercially available). Never touch the lens. Use the blower for camera lenses. Lens 1. To the User 27 ENGLISH 2. BEFORE USING 2.1 Checking the Components Check if you have the following components in your package before use. Contact the sales office if anything is missing. ENGLISH Portable CD-ROM drive CD-224PE TEAC Driver CD TEAC PCMCIA card with cable User's manual 28 2. Before Using 2.2 Operating Environment The following notebook PC system is required to use the portable CDROM drive kit: · · · · DOS/V computer with a CPU of i386x or higher Hard disk space of 500KB or more PC card slot Windows 98, Windows 95, Windows NT4.0, Windows 3.1 (MS-DOS ver. 6.2/V or higher), MS-DOS ver. 6.2/V or higher · FD * Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation in U.S. and other countries. 2. Before Using 29 ENGLISH 3. NAMES AND FUNCTIONS The names of parts and their functions are described below. ENGLISH BUSY indicator This indicator lights in amber during seek, play and read. It lights in green when the power is on. STOP button Stops CD playback when used as a standalone unit. PLAY button Starts CD playback when used as a standalone unit. External connector In the actual version of the drive the external jack is not connected. Cover 30 3. Names and Functions ENGLISH Interface connector Connect to the provided interface cable of the PCMCIA card. Headphone jack Audio output jack for stereo headphone. Use a 3.5mm-diameter stereo mini plug. (A headphone is optional) Push here to close the disc cover. EJECT button Pull forward to open the disc cover. When the disc cover is closed, it will be locked automatically. Volume Adjusts headphone's volume. 3. Names and Functions 31 4. INSTALLATION This chapter describes how the device can be connected to a personal computer (notebook). Caution: Do not insert the PC card into the PC card slot yet.. ENGLISH 4.1 Connecting the PCMCIA card to the TEAC CD-224PE Connect the interface cable of the interface connector on the back of the TEAC CD-224PE CD-ROM drive. The CD-ROM drive will be supplied and switched on and off by the notebook computer if the PCMCIA card is inserted in the respective slot. Important: Please ensure regardless of the used operating system to set the power supply function of the PCMCIA slot to on if your notebook computer supports this functionality. 32 4. Installation 4.2 Connecting the PCMCIA card to a Notebook-PC To be able to use the PCMCIA card with your notebook computer you have to activate the PCMCIA system of your notebook and you must install any neccessary driver in accordance to the manuals of your operating system and your computing platform. Important: Normally the installation of the drivers and the activating of the PCMCIA system is carried out without inserting the PCMCIA card into the respective slot. Please refer to your manual of DOS/Windows and your hardware platform for further details. Insert the PCMCIA card connected to the TEAC CD-224PE into the respective slot of your notebook after completing the software installation (PCMCIA system, card drivers etc.). The golden contact pins must be oriented towards top to achieve this operation. Important: Please follow the following instructions for each of the operating systems in question carefully. To insert/remove the card the notebook computer usually has to be switched off. Only Windows 95/98 allows under some certain circumstances depending on the PCMCIA cards firmware to remove/insert the card while running the computer. Please refer to the manuals of your operating system and your computing platform. 4. Installation 33 ENGLISH 4.3 Important instructions for Users of Windows95/98 Important: It is essential to install the driver of your PCMCIA card to run the portable CD-ROM drive. Please refer to the manual of your PCMCIA card respectively to the documentation of Windows 95/98. Your drive is recognized automatically by Windows 95/98 if any of the installation steps are carried out correctly and any configuration like the one for the power supply is correct. Caution: Removing the PCMCIA card from the PC card slot without terminating the PC card operation process may result in unexpected failures. ENGLISH 4.4 Important Instructions for Users of Windows NT 4.0 Important: It is essential to install the driver of your PCMCIA card to run the portable CD-ROM drive. Please refer to the manual of your PCMCIA card respectively to the documentation of Windows NT 4.0. You may find further details within the documentation of your PCMCIA card and in the manuals of Windows NT 4.0. If any of the installation steps are carried out correctly and any of the settings, as in example the setting of the power supply is correct, Windows NT 4.0 will automatically detect and recognize the CD-ROM drive connected to your PCMCIA card. 34 4. Installation Caution: (1) Since Windows NT 4.0 does not conform to hot swapping, be sure to insert the PC card before turning on the power of your PC. (2) Set the PC card slot mode to PCIC Compatible if such setting is possible. Refer to the instruction manual of your PC for the setting method. (3) SP4 or more for Windows 4.0 is required. (SP4 = Service Pack 4). When the Connected CD-ROM drive is not Recognized 1. Check the cable and the connection. 2. Check if the power is turned on. 3. A resource conflict may be the cause. Attempt to change resources referring to Changing resources below. Caution: To change the values of ressources you must be logged in with an Windows NT 4.0 administrator account usually. 4.5. Important Instructions for Users of Win 3.1/MS-DOS As far as Windows 3.1 and MS-DOS are concerned installations are normally carried out under MS-DOS. Installaing basically means to install the driver of your PCMCIA card correctly. Please refer to the documentation of your PCMCIA card, your DOS manuals, and the manual of your notebook computer for further details. To insert/remove the PCMCIA card your notebook computer has to be switched off. After inserting the card the notebook PC may be switched on. If the driver of your PCMCIA card is loaded correctly the operating system will recognize automatically the TEAC CD-224PE. Now it may be used under MS-DOS and Windows 3.1 without any limitations. 4. Installation 35 ENGLISH 5. SPECIFICATION 1. Disk Applicable disk CD-DA, CD-ROM (Mode-1, Mode-2), CD-I, Video-CD CD-ROM XA Mode-2 (Form-1, Form-2) Photo-CD (multisession), CD Extra (CD Plus) 12cm, 8cm Sustained: 1,546 (10.3x) to 3,600KB/s (24x) --------------------------(FULL-CAV) Burst: 8.33MB/s max. (PIO Mode 2) 130ms typ. 10s max. 128KB Once per 1012 bits or less (Mode-1 and Mode-2 Form-1) Once per 109 bits or less (Mode-2 Form-2 and CD-DA) PLAY and STOP LED green: ON LED amber: SEEK, PLAY and READ Mode Adjust headphone's volume Headphone jack (ø 3.5 mm) 10 mW DC +6V±10% (via PCMCIA slot) ATAPI (drive side) PCMCIA Card Type II 16 bit or CardBus 32 bit Temperature 5 to 40 °C, humidity 8 to 80 % (noncondensing) Temperature -20 to 60 °C, humidity 5 to 90 % (noncondensing) 130 x 16 x 146mm 250g UL, CSA, TÜV, FCC, CE 50,000 POH (dutoy 10%) (excluding the multisession photo CD) ENGLISH Disk Diameter 2. Drive performance Data transfer rate Access time Starting time from power on Data buffer capacity 3. Error rate Data read error rate 4. Front panel Button Indicator (BUSY LED) 5. Side panel Volume Audio output 6. Rear panel Power requirements Interface connector 7. Operating environment Place of operation Place of storage 8. Dimensions/weight Dimension (WxHxD) Weight 9. 10. Safety standards Reliability (MTBF) 36 5. Specification WARRANTY Model CD-224PEK Serial No. Owner's name Address Dealer's name Dealer's address Warranty Period TEAC Corporation, hereinafter called TEAC, warrants this product against any defect in material and workmanship for one (1) year from the date of purchase by the original retail purchaser. According to the following terms this TEAC product will be repaired without charge of labor and materials by the authorized TEAC service stations, by the authorized TEAC dealers and/or their authorized service stations. TEAC, the authorized TEAC service stations, the authorized TEAC dealers and/or their authorized service stations may decide wether the defective product will be repaired or replaced as a whole or partially. The TEAC dependancies, the authorized ...