* T-TOUCH EXPERT User's Manual 27.12.07 Acknowledgements We would like to thank you for choosing a TISSOT watch, a Swiss brand among the most highly renowned in the world. Your T-TOUCH watch has the most recent technical innovations. It gives you a constant analogue time display and a variety of digital displays. In addition, the following functions can be accessed simply by touching the glass: Weather, Altimeter, Chronograph, Compass, Alarm and Thermometer. w ww.tissot.ch 1/13 141_ E N T-TOUCH EXPERT * FUNCTIONS 2nd function 1st function hPa 1st function 2nd function 1015 A hPa R 1020 1025 4478m m + 27° NEW-YORK LONDON T OPT december 27 T2 27.12. 07 2 ACTIVATE TOUCHSENSITIVE GLASS ACTIVATE LIGHT N W S E N 45° CAL A Water resistance: 10 atm / 100 m / 330 ft Time T Time T2 Alarm 2 T2 AR R Relative pressure, Active altitude difference meter A Absolute pressure, Azimuth Active touch-sensitive glass Activate touch-sensitive glass / Activate light CHRONO ­ Chronograph 9 9 10 10 11 12 12 12 december 27 CENTRE ­ Date 3 N CHRONO ­ Timer LONDON T CENTRE ­ Time 1 3 4 4 W S E COMPASS ­ Compass N A NEW-YORK T2 CENTRE ­ Time 2 45° COMPASS ­ Azimuth CENTRE ­ Options OPT hPa COMPASS ­ Calibration CAL 1015 1020 1025 METEO ­ Weather, relative pressure R 6 6 7 8 ALARM ­ Alarm 1 METEO ­ Weather, absolute pressure A hPa 2 ALARM ­ Alarm 2 4478m ALTIMETER ­ Altimeter 27° THERMO ­ Thermometer m ALTIMETER ­ Altitude difference meter www.tissot.ch 2/13 141_ E N T-TOUCH EXPERT * GENERAL USER INFORMATION Activating the touch-sensitive glass Activating the light Setting mode 2 sec. 1 sec. 27.12.07 27.12.07 Display mode Activate the glass 2 sec. 27.12.07 27.12.07 27.12.07 When the glass is activated, the symbol will flash on the digital display. If the glass is not touched, it will automatically deactivate after 15 seconds. Exception: In compass and altitude difference meter mode, the glass will deactivate after 30 seconds. The display light will stay on for 5 seconds. 27.12.07 27.12.07 Date display = Default display Select a function or 27.12.07 27.12.07 10:10 10 T Time 1 display: T 12:10 10 T2 Time 2 display: T2 : move display and/or hand position forward Touch one of the 7 touch-sensitive areas of the glass to activate the corresponding function. : move display and/or hand OPt. Options Display Return to Date display position backward If no manipulation for 10 seconds, the setting mode is deactivated. LONDON T NEW-YORK T2 SETTING > TIMES T & T2 Pressing and holding or will move the hands forward or backward. After a full revolution, the minutes hand will stop and the hour hand advances/reverses in steps of one hour. Time T2 is set in steps of 15 minutes. 2 sec. 1 sec. or 10:10 07 T 27.12.07 10:10 00 T 11:32 27 11:32 00 T 11:32 27 T a) b) 27.12.07 Activate glass 10;10 00 T 10:10 00 T 11:32 27 T 11:32 00 T 11:32 27 T Time T or T2 display (example: T) Setting mode : forward 1 min. : back 1 min. (hands and display) Validate setting a) The seconds restart at zero b) The seconds continue december 27 SETTING > DATE The calendar is perpetual, i.e. the number of days per month is predefined. In continuous setting, the days scroll past slowly at first, and then quicker. After a full month, the calendar scrolls in months, and then likewise in years. 2 sec. 1 sec. 27.12.07 27.12.07 27.12.07 28.12.07 or 28.12.07 or 28.12.07 27.12.07 Activate glass 27.12.07 Date display 27.12.07 Setting mode 28.12.07 : forward one day : back one day 28.12.07 Validate setting www.tissot.ch 3/13 141_ E N T-TOUCH EXPERT * READING > OPTIONS OPT 1 sec. 27.12.07 OPt. 24h CM 0 bEEP on SLEEP 27.12.07 Activate glass OPt. Options display (see page 3) 24h CM 0 bEEP on Beep display SLEEP Automatic switch to standby mode after 5 seconds Beep every second Switch to sub-menus: Units display noSEt 24h CM 0 27.12.07 noSEt Climate zone display 24h CM 0 27.12.07 At any time: exit sub-menu ­ back to date display Back to units display OPT SETTING > UNITS 2 sec. or 24h CM 0 24h CM 0 24h CM 0 24h CM 0 24h CM 0 24h CM 0 24h CM 0 24h CM 0 24h CM 0 12h CM 0 24h CM 24h FFT 0 0 24h CM 0 Units display Setting mode Select mode 12/24 hours ­ in 12 hour mode, the letter A (AM) or P (PM) appears between minutes and seconds when setting the time Select Mode "º C / m" or "º F / ft" Validate setting. Selecting 12 hour mode displays the date in the format 12.27.2007 (month, day, year), and 24 hour mode in the format 27.12.2007 (day, month, year). OPT SETTING > BEEP 2 sec. bEEP of or bEEP of or bEEP of bEEP on bEEP on Deactivating the sound silences adjustment beeps but not the alarms. bEEP on Beep display bEEP on Setting mode bEEP on bEEP of Activated = on , Deactivated = off bEEP of Validate setting www.tissot.ch 4/13 141_ E N T-TOUCH EXPERT * OPT SETTING > STANDBY Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated. This mode economises the battery when the watch is not being worn. 27.12.07 27.12.07 SLEEP Automatic switch to standby mode after 10 seconds Beep every second a) The watch is in standby Back to time & date mode or SLEEP 27.12.07 SLEEP b) / : stop the count, the watch does not switch to standby mode 27.12.07 Back to time & date mode SETTING > HEMISPHERE AND CLIMATE ZONE OPT To get the best from the altimeter function, it is possible to adjust the hemisphere and climate zone to your geographic location. Select your climate zone according to the simplified Koeppen climate classification (see illustration on right). If the watch is not set ("No Set"), the standard atmosphere model is used: set temperature at sea level = 15°C, mean pressure at sea level: 1013.25 hPa N S Polar Temperate Arid Tropical Mediterranean 2 sec. or noSEt noSEt North T North M North T North T noSEt Climate zone display noSEt Setting mode North T South T noSEt Select hemisphere: North = North, South = South not set = not set North M North A Northtr North P Set the local climate: T = temperate; M = Mediterranean; A = arid; tr = tropical; P = polar North T Validate setting www.tissot.ch 5/13 141_ E N T-TOUCH EXPERT * SETTING > SYNCHRONISATION OPT The watch needs to be synchronised if the watch hands do not display the same time as the digital display, or if they are not correctly superimposed when accessing the functions. 10:10 00 T 10:10 00 T The watch is desynchronised when its electric motor's mechanism is disturbed due to heavy impacts for example. N.B.: The glass must be active to access the synchronisation mode. Synchronised Desynchronised or 5 sec. 24h 0 CM SYNCHRO SYNCHRO or or or SYNCHRO SYNCHRO SYNCHRO 10:10 00 T 10:10 T 24h CM 0 SYNCHRO Synchronisation setting mode The hands should be perfectly superimposed in the 12 o'clock position Position the hour hand at 12 o'clock SYNCHRO Validate setting Position the minutes hand at 12 o'clock 10:10 00 T Units display Validate setting Return to Time T mode hPa 1015 1020 1025 R A hPa WEATHER In weather mode, the hands are superimposed to indicate the weather trend. 1 sec. 27.12.07 1005hPA R 995hPA A 27.12.07 Activate glass hPa 1005hPA R 995hPA A Relative pressure display in hPa Absolute pressure display in hPa 1015 1020 1025 SETTING > RELATIVE PRESSURE PRESETTING Setting this pressure changes the altitude displayed. The possible relative pressure is deliberately limited between 950 hPa and 1100 hPa. R 2 sec. or 1005hPA R or 1004hPA R 1004hPA R 1004hPA R 1005hPA R 1004hPA R 1004hPA R Setting mode : up one hectopascal : down one hectopascal Validate setting www.tissot.ch 6/13 141_ E N T-TOUCH EXPERT * hPa 1015 1020 1025 R A hPa GLOSSARY > WEATHER Variable Storm Sunny Description of function In weather mode, the hands are superimposed to indicate the weather trend. 1004hPA A Explanations Weather changes are related to variations in atmospheric pressure. When atmospheric pressure increases the sky clears. The area is then referred to as a "high pressure" area or "anticyclone" (A). When atmospheric pressure decreases the sky clouds over. The area is then referred to as a "low pressure" area or "depression" (D). The T-TOUCH measures these pressure variations and indicates the weather trend with the hands, which can adopt the following 7 positions according to the weather developments: Big pressure drop, rapid deterioration Moderate pressure drop, probable deterioration - 2': Small pressure drop, probable slight deterioration 12 o'clock: No notable weather change + 2': Slight pressure rise, probable slight improvement + 4': Moderate pressure rise, probable improvement + 6': Big pressure rise, rapid improvement - 6': - 4': The T-TOUCH program takes account of atmospheric pressure variation over the last 6 hours to calculate the trend to indicate. Furthermore, the pressure variation caused by a rapid change in altitude is detected by the watch and compensated for automatically. So it only has a minimal impact on the barometric trend. A The T-TOUCH digital display indicates the 1020 1015 absolute and relative atmospheric pressure 1010 values in hectoPascals [hPa]. Absolute atmospheric pressure is the actual pressure D 990 at the time and place of measurement, and 995 1000 cannot be altered. Relative pressure is a 15 10 1 0 02 0 10 1005 1A * value relative to sea level, based on local absolute atmospheric pressure . Barometers and weather charts show relative pressure values. The relative pressure value depends on the climate zone set, and can be preset on the watch. The relative pressure presetting is in line with the altitude. 6 42 12 24 6 Characteristics of function Measurement range: absolute pressure: 300 hPa to 1100 hPa relative pressure: 950 hPa to 1100 hPa Accuracy: absolute pressure: ± 3 hPa relative pressure: varies with altimeter Resolution: 1 hPa Unit conversion: 1 hectoPascal [hPa] = 1 millibar [mb] 4478m m ALTIMETER The altitude is displayed on the digital screen for 10 hours continuously. After 10 hours, the altimeter mode is deactivated, and the date is displayed. 1 sec. 27.12.07 792M 03:18h55 27.12.07 Activate glass 792M 2599FT Altitude display 03:18h55 Altitude difference display 4478m m SETTING > ALTITUDE PRESETTING 2 sec. or 792M 792M 795M 795M or 795M 792M Altitude display 792M Setting mode 795M : up 1 m or 3 ft : down 1 m or 3 ft 795M Validate setting www.tissot.ch 7/13 10 141_ E N 10 T-TOUCH EXPERT * m ALTIMETER > ALTITUDE DIFFERENCE Sequentially every 2 seconds 2 sec. 2 sec. 03:18h55 03:18h55 1188A Total cumulative gain in altitude during elapsed time 18A5 Mean vertical speed of ascent (metres/minute or feet/minute) Elapsed time or stopped time 2 sec. 2 sec. 03:18h55 Altitude difference display 3192d 24d5 Mean vertical speed of descent (metres/minute or feet/minute) 2 sec. 03:18h55 Back: Elapsed time or stopped time Total cumulative loss in altitude during elapsed time 00:00h00 R 03:18h55 R 00:00h00 2 sec. rUn 00:00h00 R STOP 03:18h55 R rESET 00:00h00 Reset Altitude difference meter Start Altitude difference meter Stop Altitude difference meter 4478m m GLOSSARY > ALTIMETER We advise you to stop the altitude difference meter during rest times and then restart it, in order to obtain more accurate results. 792M R Description of function In altimeter mode, your T-TOUCH becomes a barometric altimeter, displaying the altitude relative to mean sea level. ...