User manual TOYOTA GENUINE AUDIO AVENSIS T25

AUDIO TOYOTA GENUINE AUDIO NOTICE EXPLICATIVE DE L'INSTALLATION Avensis FÜR-FOR-POUR **T25*R RHD Binder Volume 4 Manual Ref.no A4RT25/J-0-0 Avensis (T25) TOYOTA GENUINE AUDIO 1. TABLE OF CONTENTS 1. Application Chart ............................................................................................................................................................................ 2. System Layout .............................................................................................................................................................................. 3. In-dash 6 CD-Changer Installation ................................................................................................................................................. 4. Hide-away 6 CD-changer installation .............................................................................................................................................. 4 5 6 15 Avensis (RHD) - 3 10-02 p. 1/1 AUDIO & NAVIGATION APPLICATION CHART TMME-CA Division Dev. Dept. II - December 12th, 2002 Avensis **T25*R + ADD-ON UNIT(S) Hide Away CD-Changer TM0461 (08601-00911) In-Dash CD-Changer TM0561 (08601-00907) Navigation System TNS200 (08545-00802) (ONLY PORT FIT) (RHD) COMBINATION MOP-unit or W53900 (08600-05821) (2) (2) (1) (1) (3) (3) (2) (2) (1) (1) (2) (2) (1) (1) (3) (3) (2) (2) (1) (1) (3) (3) (3) (3) (3) (3) (3) (3) Wire (08695-00370) Wire (08695-00370) MOP-unit or W53901 (08600-05822) MOP-unit or W53900 (08600-05821) MOP-unit or W53900 (08600-05821) MOP-unit or W53900 (08600-05821) MOP-unit or W53900 (08600-05821) MOP-Unit or W53900 (08600-05821) MOP-unit or W53901 (08600-05822) MOP-Unit or W53901 (08600-05822) MOP-unit or W53901 (08600-05822) MOP-Unit or W53901 (08600-05822) MOP-Unit or W53901 (08600-05822) HEAD UNIT REQUIRED ADDITIONAL PARTS 1 Radio/Cassette/CD (Lo) (only) 2 Radio/Cassette/CD (Hi) (only) 3 Radio/Cassette/CD (Lo) + Hide Away CD-Changer 4 Radio/Cassette/CD (Lo) + In-Dash CD-Changer Wire (08695-00370) + F/K (08695-05801) Wire (08695-00370) + F/K (08695-05801) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ425-T0330-60) Wire (08695-00370) Wire (08695-00370) Wire (08695-00370) + F/K (08695-05801) Wire (08695-00370) + F/K (08695-05801) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ425-T0330-60) Wire (08695-00370) + F/K (08695-05801) + F/K (PZ425-T0330-60) 5 Radio/Cassette/CD (Lo) + Navigation (TBT) 6 Radio/Cassette/CD (Lo) + Hide Away CD-Changer + Navigation (TBT) Unique Design Audio 7 Radio/Cassette/CD (Lo) + In-Dash CD-Changer + Navigation (TBT) 8 Radio/Cassette/CD (Hi) + Hide Away CD-Changer 9 Radio/Cassette/CD (Hi) + In-Dash CD-Changer 10 Radio/Cassette/CD (Hi) + Navigation (TBT) 11 Radio/Cassette/CD (Hi) + Hide Away CD-Changer + Navigation (TBT) 12 Radio/Cassette/CD (Hi) + In-Dash CD-Changer + Navigation (TBT) MOP: Factory installed option (1): Glove box application (2): Located under the RH-seat (3): Located under the LH-seat. For required additional parts see the NAVI installation instructions. Avensis (T25) TOYOTA GENUINE AUDIO 2. SYSTEM LAYOUT THE HIDE-AWAY 6 CD-CHANGER 12 NOTE: The installation position of the hide-away 6 CD-changer 12 in under the driver seat. Avensis (RHD) - 5 10-02 Avensis (T25) TOYOTA GENUINE AUDIO 3. IN-DASH 6 CD-CHANGER INSTALLATION 5 3 6 1. Remove the shift knob 1 and shift cover 2 using a nylon pry tool. : Clip (4x) : Nail (4x) 1 2 4 1 2 Fig. 1 Remove the panel 3 . : Clip (5x) 2. 3 Fig. 2 Attach the protection tape 4 . 3. 4 4 Fig. 3 10-02 Avensis (RHD) - 6 Avensis (T25) TOYOTA GENUINE AUDIO 4. Remove the audio unit 5 . 101 : Bolt (4x) 5 101 101 Fig. 4 5. a) b) 104 104 28 Remove the glove compartment 6 . Remove the hooks 104 . 104 : Hook (2x) Remove the stoppers 28 by pulling them inside. 28 6 Fig. 5 6. a) b) c) 27 20 Remove the switch 26 . Remove the bulb 20 . Remove the connector 27 by moving it upward. 26 Fig. 6 Avensis (RHD) - 7 10-02 Avensis (T25) TOYOTA GENUINE AUDIO 7. Appro ximat ely 1 Cut the tape 5 into 10 equal pieces. 5 Fig. 7 8. Relocate the vehicle connector 28 position from location "A" to location"B" and attach the connector 28 to the harness using tape 5 and a wire tie 20 . 20 : Wire tie (1x) "A" 28 28 5 Harness "B" 20 28 Fig. 8 10-02 Avensis (RHD) - 8 Avensis (T25) TOYOTA GENUINE AUDIO 9. Wire of changer unit 6 Route and attach the changer wire using wire ties 20 . 20 : Wire tie (3x) 6 20 Connect Fig. 9 20 10. Route the changer wire 6 using wire ties 20 and wrap the connectors using tape 5 . 5 : Tape 2x (3x) 20 : Wire tie (2x) 6 Vehicle harness WITH POP UP DISPLAY Do not connect 6 5 AVC-LAN wire harness 5 Vehicle harness To audio 5 WITHOUT POP UP DISPLAY Do not connect 6 AVC-LAN wire harness 5 5 To audio Do not connect Fig. 10 Avensis (RHD) - 9 10-02 Avensis (T25) TOYOTA GENUINE AUDIO 11. Cut the template (312N) 7 (see page 22, 23) using scissors. 7 Fig. 11 Hole fit Corner fits 7 Corner fits 12. Mark the dashboard using the template (312N) 7 . Marking Fig. 12 Drill a hole of 10mm 4 13. Use protection tape 4 in order not to damage the surface of the dashboard. Marking Fig. 13 10-02 Avensis (RHD) - 10 Avensis (T25) TOYOTA GENUINE AUDIO Cut Cut 14. Cut the marked position on the dashboard using a saw. Saw Fig. 14 15. Cut the marked position on the dashboard using a saw. Cut Saw Fig. 15 Existing holes Reinforcement pipe 16. Temporary attach the screws in the existing holes. 106 : Screw (M6x12) (2x) 106 Fig. 16 Avensis (RHD) - 11 10-02 Avensis (T25) TOYOTA GENUINE AUDIO 30 17. Fit the side bracket 21 (L) and (R) onto the changer unit 30 . 10 : Bolt (M5x8) (4x) 10 21 21 Fig. 17 10 22 Connector 18. a) Fit the switch 24 . b) Fit the in-dash changer unit 22 : Screw (M6x12) (2x) 23 : Screw (M6x14) (2x) 30 . 23 Fig. 18 30 23 24 Existing marking 19. Cut the glove compartment 6 . Cut 6 Blanket Fig. 19 10-02 Avensis (RHD) - 12 Avensis (T25) TOYOTA GENUINE AUDIO 20. Fit the glove compartment 6 . 104 : Hook (2x) 104 6 Fig. 20 21. Cut the panel 3 . Cut 3 Cut Fig. 22 Avensis (RHD) - 13 10-02 Avensis (T25) TOYOTA GENUINE AUDIO 22. Fit the panel 3 . 3 Fig. 23 10-02 Avensis (RHD) - 14 Avensis (T25) TOYOTA GENUINE AUDIO 3. HIDE-AWAY 6 CD-CHANGER INSTALLATION 5 3 6 1. Remove the shift knob 1 and shift cover 2 using a nylon pry tool. : Clip (4x) : Nail (4x) 1 2 4 1 2 Fig. 24 2. Remove the panel 3 . : Clip (5x) 3 Fig. 25 3. Attach the protection tape 4 . 4 4 Fig. 26 Avensis (RHD) - 15 10-02 Avensis (T25) TOYOTA GENUINE AUDIO 4. Remove the audio unit 5 . 101 : Bolt (4x) 5 101 101 Fig. 28 105 15 5. a) b) Remove the cover 15 . 105 : Screw (2x) Remove the centre console 16 . 106 : Screw (4x) 107 : Bolt (4x) 16 106 107 106 107 107 Fig. 29 10-02 Avensis (RHD) - 16 Avensis (T25) TOYOTA GENUINE AUDIO 6. 8 a) b) Remove the front door scuff plate 8 (R). : Nail (5x) Remove the kick panel 9 (R). 103 : Nut (1x) 103 9 Fig. 30 7. 11 10 Remove the driver seat 10 . 106 : Bolt w/washer (4x) 11 : Cover (2x) CAUTION Fasten the bolt with specified torque when reassembling. 11 106 106 Fig. 31 25mm 8. Cut the tape 5 into 10 equal pieces. 5 Fig. 32 Avensis (RHD) - 17 10-02 Avensis (T25) TOYOTA GENUINE AUDIO 9. Route the changer wire 6 and wrap the connectors using tape 5 . 5 : Tape (2x3) 6 5 Vehicle Harness WITH POP UP DISPLAY Do not connect 6 5 To audio 5 AVC-LAN wire harness WITHOUT POP UP DISPLAY 5 Do not connect 5 To audio AVC-LAN wire harness 6 Do not connect Fig. 33 10. Route and attach the changer wire using tape 5 (1x). 6 5 Duct 6 Fig. 34 10-02 Avensis (RHD) - 18 Avensis (T25) TOYOTA GENUINE AUDIO 11. a) Route the changer wire 6 along the cross member 12 and attach using tape 5 (4x). b) Attach the excess wire of the changer wire 6 onto the cross member 12 using tape 5 (6x). 12 6 5 Vehicle harness Excess wire 50 0m m m 0m 27 30 0m m 50 0m m 6 5 Fig. 35 m 0m 20 Cross member Positioning hole driver seat 12. Cut the carpet at the changer unit attachment position on the driver side. Duct 269mm 45mm 80mm Cut area Centre console Fig. 36 Avensis (RHD) - 19 10-02 185mm Avensis (T25) TOYOTA GENUINE AUDIO 8 7 13. Attach the adhesive tapes 5 and the spacers ( 15 and 16 ) to the base bracket 7 using screws 8 . 15 : Spacer (w/o nut) 16 : Spacer (w/nut) 5 : Tape (1x) 5 *: Tape (cut to size 67mmx50mm) (1x) 8 : Screw (M5x16) (2x) 15 16 5 15 16 7 5 * 5 5 Fig. 37 14. Attach the base bracket on the driver side. 7 on the floor 7 Fig. 38 10-02 Avensis (RHD) - 20 Avensis (T25) TOYOTA GENUINE AUDIO 15. Mount the side brackets changer unit 12 . 10 : Bolt (M5x8) (4x) CAUTION Screw 9 (2x) to the CAUTION Loosen the screws 10 before moving them. Tighten up after the position is changed. 9 9 10 10 9 12 Hole position on the left side Hole position on the right side 9 Fig. 39 6 10 10 12 16. Fit the changer unit a) b) 12 . Connect the changer wire 6 to the changer unit 12 . Mount the changer unit 12 onto the base bracket 7 using screws 10 . 105 : Bolt (M5x10) (4x) 7 Fig. 40 ENSURE THAT ALL REMOVED CONNECTORS ARE PUT BACK CORRECTLY. REFIT THE TRIM AND REMOVED PARTS. Avensis (RHD) - 21 10-02