PREFACE Thank you for purchasing the TV-IP110/TV-IP110W Wire/Wireless Internet Camera Server, a powerful and high-quality image network camera. The camera can be installed as a standalone system within your application environment easily and quickly, and supports remote management function so that you can access and control it using a Web browser on your PC. This guide will provide you more information of instruction and illustrations on how to use your camera, which includes: Chapter 1 Introduction to Your Camera describes the features of the camera. You will also know the components and functions of the camera. Hardware Installation helps you install the camera according to your application environment. You can use this camera at home, at work, at any where you want. Accessing the Camera lets you start using your camera without problem. The camera can be set up easily and work within your network environment instantly. Configuring the Camera guides you through the configuration of the camera using the web browser on your PC. Using SecurViewTM shows you the detail instructions on operating SecurViewTM software. Appendix provides the specification of the camera and some useful information for using your camera. Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 NOTE The illustrations and configuration values in this guide are for reference only. The actual settings depend on your practical application of the camera. -1- Contents PREFACE ......................................................................... 1 CHAPTER 1 ..................................................................... 4 INTRODUCTION TO YOUR CAMERA ............... 4 1.1 CHECKING THE PACKAGE CONTENTS ...................................4 TV-IP110 (FRONT/BACK VIEW) ....................................................5 TV-IP110W (FRONT/BACK VIEW) .................................................6 1.3 FEATURES AND BENEFITS .....................................................8 1.4 SYSTEM REQUIREMENT .........................................................9 CHAPTER 2 ................................................................... 10 HARDWARE INSTALLATION .............................. 10 2.1 2.2 2.3 INSTALLING THE CAMERA STAND .......................................10 CONNECTING THE CAMERA TO LAN...................................11 APPLICATIONS OF THE CAMERA ..........................................12 CHAPTER 3 ................................................................... 13 ACCESSING THE CAMERA .................................. 13 3.1 3.2 3.3 USING IP SETUP ..................................................................13 ACCESSING TO THE CAMERA...............................................18 CONFIGURING THE IP ADDRESS OF THE PC ........................21 CHAPTER 4 ................................................................... 22 CONFIGURING THE CAMERA ........................... 22 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 USING THE WEB CONFIGURATION ......................................22 USING SMART WIZARD .......................................................23 BASIC SETUP .......................................................................27 NETWORK SETTINGS ...........................................................31 SETTING UP VIDEO ..............................................................38 EVENT SERVER CONFIGURATION ........................................41 MOTION DETECT .................................................................44 EVENT CONFIG ....................................................................46 TOOLS .................................................................................51 INFORMATION .....................................................................53 -2- CHAPTER 5 ................................................................... 54 SECURVIEWTM SOFTWARE .................................. 54 5.1 INSTALLATION ...............................................................54 5.2 USING INSTALLATION ..................................................59 ITEM FEATURES ............................................................................59 TO REMOVE A CAMERA ................................................................69 TO LINK TO THE WEB PAGE OF THE CAMERA ...............................70 TO RECORD VIDEO ........................................................................71 TO CONFIGURE THE RECORDING SETTINGS ...................................76 TO PLAYBACK THE RECORDED VIDEO ..........................................78 TO SET UP MOTION DETECTION OPTIONS ......................................78 ACCOUNT .....................................................................................81 OTHER ..........................................................................................81 INFORMATION...............................................................................82 CHAPTER 6 ................................................................... 83 APPENDIX ..................................................................... 83 A.1 SPECIFICATION ....................................................................83 -3- CHAPTER 1 INTRODUCTION TO YOUR CAMERA 1.1 Checking the Package Contents Check the items contained in the package carefully. You should have the following: TV-IP110/TV-IP110W Network Camera. Multi-Language Quick Installation Guide Utility CD-ROM Detachable External Antenna (for TV-IP110W only) Camera Stand RJ-45 Ethernet Cable AC Power Adapter (5VDC, 2.5A) NOTE: If there is any item damage or missing, please contact your local authorized deal for replacement. -4- 1.2 Getting to Know Your Camera TV-IP110 (Front/Back View) -5- TV-IP110W (Front/Back View) -6- - Power LED: A steady orange light indicates the camera is powered on. Link LED: A flash green light indicates the camera's network connection correctly. Detachable Antenna (TV-IP110W only): The detachable external antenna allows you to adjust its position to obtain the maximum signal. Camera Stand Connection: Connects the camera with the camera stand. Power Connector: Connects the AC power adapter to supply power to the camera. LAN Port: It is used to connect the network RJ-45 cable, which supports the NWay protocol so that the camera can detect the network speed automatically. Reset Button: Reset will be initiated when the reset button is pressed once. The power LED begins to flash. - - Factory Reset will be initiated when the reset button is pressed continuously for three seconds or when Power LED begins to light up. Release the reset button and the Power LED will begin to flash. -7- 1.3 Features and Benefits Surveillance Supported Enable motion detection and setup automated email alerts and upload FTP for security. Remote Control Supported By using a standard Web browser or the bundled SecurView software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor the image and take snapshots via the network. Multiple Platforms Supported The camera supports multiple network protocols, including TCP/IP, SMTP e-mail, HTTP, and other Internet related protocols. Therefore, you can use the camera in a mixed operating system environment, such as Windows 2000, XP, and Vista. Multiple Applications Supported Through the remote access technology, you can use the cameras to monitor various objects and places for your own purposes. For example, babies at home, patients in the hospital, offices and banks, and more. The camera can capture both still images and video clips, so that you can keep the archives and restore them at any time. -8- 1.4 System Requirement Networking LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet. WLAN: IEEE 802.11b/g. (For TV-IP110W) Accessing the Camera using Web Browser Platform: Microsoft® Windows® 2000/XP/Vista/Windows 7 Macintosh OSX CPU: Intel Pentium III 350MHz or above RAM: 128MB Resolution: 800x600 or above User Interface: Microsoft® Internet Explorer 6.0 or above Accessing the Camera using SecurView Platform: Microsoft® Windows® 2000/XP/Vista/Windows 7 Hardware Requirement: 1 camera connected: Intel Pentium III 800MHz; 512MB RAM 2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM 5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM 9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM Resolution: 1024x768 or above NOTE If you connect multiple cameras to monitor various places simultaneously, you are recommended to use a computer with higher performance. -9- CHAPTER 2 HARDWARE INSTALLATION 2.1 Installing the Camera Stand The camera comes with a camera stand, which uses a swivel ball screw head to lock to the camera's screw hole. When the camera stand is attached, you can place the camera anywhere by mounting the camera through the three screw holes located in the base of the camera stand. The Camera Stand - 10 - 2.2 Connecting the Camera to LAN Connects an Ethernet cable to the LAN port located on the Camera's real panel, and then attaches it to the network. Connects an antenna to the antenna connector. (TV-IP110W) Attach the external power supply to the DC power input connector located on Camera's real Panel, and then connect it to your local power supply. NOTE Please configure the wireless setting via the wire connection. - 11 - 2.3 Applications of the Camera The camera can be applied in multiple applications, including: Monitor local and remote places and objects via Internet or Intranet. Capture still images and video clips remotely. Upload images or send email messages with the still images attached. The following diagram explains one of the typical applications for your camera and provides a basic example for installing the camera. * - 12 - CHAPTER 3 ACCESSING THE CAMERA 3.1 Using IP Setup The camera comes with a conveniently utility, IP Setup, which is included in the Installation CD-ROM, allowing you to search the camera on your network easily. 1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the Auto-Run program. 2. Click the IP Setup from the Auto-Run menu screen. Then IP Setup Wizard will appear. Click "Next" when the Welcome to the IPSetup Setup Wizard appears. - 13 - 3. Click "Browse" to choose the desired destination location. By default, the destination location is C:\Program Files\TRENDnet\IPSetup. Then Click "Next". 4. 5. Click "Next" to confirm the IPSetup software to be installed to the computer. When the Installation Complete window appears, click "Finish". - 14 - 6. After installing the IPSetup utility, the application is automatically installed to your computer, and creates a folder in " Start \Program\TRENDnet\IPSetup". 7. Click Start > Programs > TRENDnet > IPSetup, and then click IPSetup 8. The IPSetup window will appear. It will search the Camera within the same network. - 15 - Camera Display Area - Camera Display Area: It shows the connected camera(s) within the same network. Double click the IP address; it will link to Camera's Web Configuration page. - Change IP: Click this button to bring up the following window. It allows you to change the IP Address. You can select either Static IP or click DHCP. Then, enter the Administrator ID & password. By default ID/password is: admin. When complete, click "Change". - 16 - - Search: Click this button to search the connected camera in the same network." Exit: Click this button to exit the program. - 17 - 3.2 Accessing to the Camera 1. Open the Web browser on your computer (example showed in the User's Guide is based on the Internet Explorer) 2. Type the Camera IP address that DHCP server assigned in the web browser URL (e.g. 192.168.10.30) and then press [Enter]. 3. When the login window appears, enter the default User name (admin) and password (admin) and press OK to access to the main screen of the camera's Web Configuration. - 18 - NOTE If you are initially access to the camera, you will be ask to install a new plug-in for the camera. Permission request depends on the Internet security settings of your computer. Click Yes to proceed. After you login into the Web Configuration of the camera, the main page will appear as below: Camera Information Zoom In Live View/ Setup Function Live View Image - 19 - The main page of the Web Configuration provides you with many useful information and functions, including: Camera Information ­ Display the camera's location and the current date & time. The information can be modified in the Web Configuration. Live View Image ­ Displays the real-time image of the connected camera. Zoom In ­ Click the buttons to zoom in the live view image by 1x, 2x, and 3x. Live View/Setup Switch ­ Click Setup to configure the camera. For details, see Chapter 4. Function ­ Use these butt ...