AMCAP V1.0 AMCAP Preparation 3 Fill in `Capture file size:' e.g. 30. Click [OK] 1 Install driver from CD-ROM as mentioned in paper manual. 2 Start AMCAP (Start Programs name AMCap 4 Trust Product Start recording: Click [Capture] Click [Start Capture] Set Frame Rate: this is for recorded video. Set it if desired. 3 Preview screen appears automatically. If no preview check: 1. [Devices] Select "Trust web cam" (model varies) 2. [Option] Enable [Preview] Click [OK] to start capture. 5 Video starts recording now. Recording needs to be stopped manually. [Options] Video Capture Pin 4 Adjust Video format for viewing: - Frame Rate: (up to 30) Higher frame rate, image refresh quicker. - Color Space Default at RGB 24. Set to I420 if needed. - Resolution (Output Size) Higher resolution captures bigger video. [Options] Video Capture Filter 6 Stop recording Press [ESC] (escape-key) or Click [Capture], click [Stop Capture]. 7 Timed recording: · · · · Use default media player to playbackrecorded file. Go to location where file is saved (step 2) Adjust image quality where desired. For example, brightness, contrast, hue and etc. AWB (Auto White Balance), Auto Mode Control are suggested to remain enabled. [Set Time Limit...]. See [Capture] Mark "Use Time Limit" Fill in x seconds for video recording] Click [Start Capture]. Recording stops after x seconds. Record with Audio: · · · Mark Audio device. See [Devices] Mark [Capture Audio]. See [Capture] Click [Start Capture]. 5 B/W Mode: black and white image. Backlight compensation: backlight compensates. Restore: to restore previous setting. Save: to save current setting. If it turns out to undesired result, press `Reset to Default' button. Error messages Sorry, you have no video capture hardware. Error during capture Stopping capture (device Lost). Select new capture device. Re-connect the camera or try another USB port. Camera is disconnected from computer. Close application, reconnect and start application again. Camera is disconnected from computer. Close application, reconnect and start application again. Record a video 1 Click [File] Click [Set Capture File ...] 2 Fill in file name with extension .AVI. For example: "my video.avi" Provide location where to store file. For example "My Documents" Click [Open] to continue. ...