User Manual TViX HD M-6500A All specifications and information are subject to changes without further notices. Safety Notice Do not disassemble the device. It may cause malfunction or fire. Magnetic material may erase the data in TViX. Keep any magnetic material away from TViX.. Do not expose TViX to oil, smoke, water, humidity and dust. Keep TViX away from heat or fire. Do not block any ventilation openings. Ensure that a free airflow is maintained around the appliance. Do not touch power plug with wet hands or do not use defective power cable & loose outlet. It may cause electric shock or fire. Be careful not to drop TViX from a height. It will damage the internal hard drive. Do not take out the internal hard drive by yourself. The internal hard drive is very hot when it is working. The warranty will be void if any other hard drive is inserted into TViX. "Do not block any ventilation openings. Ensure that a free airflow is maintained around the appliance." The socket-outlet shall be installed near the equipment and shall be easily accessible. 2 Usage Precautions Please read the following usage precautions before using your TViX HD. Make sure the power is off when you connect the A/V cable between the TViX and the TV. When cleaning the TViX product, pull out the power cord and then wipe it with a soft piece of dry cloth. When connected to the computer through the USB cable the TViX HD acts as an external USB storage device (In this state, there is no video/audio output displayed on the TV Screen a USB ON icon will be displayed on the center of the TV screen and on the VFD. it will be display as USB ON). For normal TViX play mode, disconnect the USB cable connected between computer and TViX When detaching the HDD, please let the heat out sufficiently. The supplied cables and accessories are recommended for customized best performance of the TViX HD. Using other cables or accessories may not provide best performance. If you want to unplug the device, press the return button to 'Unplug or Eject Hardware'. Windows 98 SE and Windows ME does not support NTFS file format. However, NTFS file format is available on Windows 2000/XP. "Primary Partition" is recommended when creating two or more partitions with a single hard disk drive. If you choose FAT32 file format on Windows 2000/XP, the drives maximum size will be limited to 32GBs. If you want to use a single drive letter of 32GBs or more, you have to format on Windows 98SE/ME. The certification sticker mark is on the bottom of the device. You can insert the characters using remote-numeric key. Numeric key 1 when pressed successively changes as @ : / _ -. We don't have any warranty or responsibility for broken hard disk. We recommend to backup periodically. ** Some functions will require you to update the latest firmware in first. 3 Table of Contents Safety Notice ........................................................................................................................................ 2 Usage Precautions ................................................................................................................................ 3 1 Introduction................................................................................................. 5 1.1 1.2 1.3 1.4 Multimedia Player .................................................................................................................. 5 Audio Player .......................................................................................................................... 6 External Storage .................................................................................................................... 6 Specifications ........................................................................................................................ 7 2 Name of Each Part ...................................................................................... 8 2.1 2.2 2.3 Control Panel ......................................................................................................................... 8 Cable Connection .................................................................................................................. 8 Package Contents ................................................................................................................. 8 3 Installation and Connection....................................................................... 9 3.1 3.2 3.3 3.4 Video Connection .................................................................................................................. 9 Audio Connection ................................................................................................................ 11 HDD Installation/Exchange .................................................................................................. 12 Initial Setting ........................................................................................................................ 14 4 TViX HD Setup Menu ................................................................................ 15 4.1 4.2 4.3 Audio/Video Setting ............................................................................................................. 15 MISC Setting ....................................................................................................................... 17 Network Setting ................................................................................................................... 18 5 Easy Usage of TViX HD ............................................................................ 19 5.1 5.2 5.3 5.4 Making an HDD Folder ........................................................................................................ 19 Play Video Files ................................................................................................................... 20 Play Audio Files ................................................................................................................... 21 Play Image Files .................................................................................................................. 22 6 Using the remote control ......................................................................... 23 6.1 6.2 6.3 6.4 Basic Functions ................................................................................................................... 23 Descriptions of Each Buttons ............................................................................................... 24 Extra Features ..................................................................................................................... 31 Network Connection ............................................................................................................ 36 7 8 Firmware Upgrade .................................................................................... 52 Using USB Connection with the PC ........................................................ 54 8.1 8.2 8.3 8.4 Windows 98SE Driver Installation ........................................................................................ 54 Making a Partition and Formatting the HDDs under Windows 98SE / ME ............................. 57 Making a Partition and Formatting the HDDs under Windows 2000 / XP/VISTA .................... 59 Unplug or Eject Hardware .................................................................................................... 61 9 Appendix - Technical Terms .................................................................... 62 10 GNU General Public License ................................................................... 64 4 1 Introduction 1.1 Multimedia Player TViX HD is a standalone, multimedia hard disk player which plays digital videos, digital music, digital still images and DVD files to a TV display and home entertainment system. You can enjoy digital contents in your living room without having to burn discs or having to play it back on a DVD or CD player anymore. TViX HD plays back DVD movies with the full functionality of DVD navigation. You can create your own virtual DVD library by storing your personal collection of DVDs in .ISO or .IFO format and watch them exactly as if they were running from the original DVDs (all original features included: Menu, Chapter, Audio Stream, Subtitle, Fast Forward, Rewind, Slow, Pause, Step Forward, Repeat, Search etc.). TViX HD plays back high definition video (up to 1920x1080P) and still images. Prerecorded HDTV programs from a digital TV set-top box or personal digital video contents taken by a HDVTM camcorder can be played back with the TViX HD on a high definition display. The TViX HD features a HDMI connector and component, which will match the high resolution of HD level video contents. Using the latest SMP8635 processor, TViX HD supports the latest multimedia formats MKV, MPEG-4 AVC(H.264), VC-1( MP@HL, AP@L3), WMV9 & WMV HD as well as MPEG4 3.11,4.0 , 5.0. H.264 is a brand-new and superb compression technology today. It makes you more stunning HD movie with lower storage capacity. HDMI provides unparalleled qualities to digital video and audio, while DVI only serves digital video. You don't have to mess around with several AV cables. It provides single, pure and simple way to connect your display. It can deliver uncompressed digital video up to 1080p as well as multi-channel digital audio. TViX HD supports DTS hardware decoder to mix DTS sound into 2 channels for a more dynamic sound quality. The TViX HD can be networked with a PC system using its built-in LAN port. You are able to navigate to a PC file through TViX HD's wired or wireless network and play the file from its original destination without having to copy it into the TViX first. We're supporting the file copy via LAN. With two USB2.0 host ports, you can now attach additional external USB hard drives to further extend the storage capacity. You can also playback files from a digital camera, USB flash driver, USB flash card reader, or a MP3 player. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. ** For the further functions, please refer to following FAQ- http://www.tvix.co.kr/eng/faq 5 1.2 Audio Player TViX HD can play a variety of audio files such as FLAC, MP3, Ipod, M4A, Ogg Vorbis or WMA (Windows Media Audio) through the TV speaker and any other audio systems. You can listen to your favorite music files nonstop, by organizing a custom winamp playlist. Now you can enjoy music all day without changing CDs. TViX supports the internet radio of shoutcast streaming format (.pls,.m3u). You can watch picture slideshows with the option of background music (supports Simultaneous playback of Audio and picture images). 1.3 External Storage If you connect to a USB 1.1 port, the TViX HD will work at USB 1.1 speed, so we strongly recommend that you use USB 2.0. It can be used as an external device by connecting it to the System, to save video, audio, image files, data, program backups etc. USB 2.0 enables TViX HD to become as an external storage device which supports speed up to 480Mbit/s. It supports Plug & Play, so Windows will automatically recognize TViX HD the instant it is connected to the system If you connect the USB Cable between the system and TVIX. During playback , then on VFD it will be displayed as USB ON. When you disconnect the USB, you do not have to reboot the TViX HD for continuous use. If you are a Windows98SE user, you should download a USB storage driver from our website www.tvix.co.kr before you connect your TViX HD with your system. You do not need to install a driver in Windows ME/2000/XP. You can download latest NetShare Software from our website www.tvix.co.kr/Eng before you configure NFS network. If you select to NFS mode, you can play the TP or DVD jukebox without stutter. 6 1.4 Specifications Sigma Design SMP8635 7 Alpha-Numeric Character 5 Digit Numeric Display Format :.wmv, .avi, .mpg, .vob, .mp4, .asf, .tp, .trp , .IFO, .ISO, .m2t,.m2ts ,.mov(H.264) Codec : MPEG 1 / 2 / 4, AVI, XVID, WMV9(MP@HL), H.264/ AVC(HD) , VC-1(MP@HL, AP@L3), MKV Resolutions up to 1920*1080P MP3, WMA, AAC, Ogg, PCM, AC3, M4A, FLAC, WAV, WAV(DTS), wave pack, .APE Main Chipset VFD Display Video Audio Photo DTS Pass Through and Down Mixing JPEG (Progressive JPEG not Support) USB2.0 Host 2 Ports Connectivity USB2.0 Target 1 Port LAN Video HDMI 1.3(Video 24 bit), Component, S-Video, Composite AV In / Out Audio Digital : Coaxial, Optical , Optional DTV Tuner Port File Formats Subtitle Hard Disk ODD Support Language FAN RAM Internal Power Size Weight NTFS, FAT32(S-ATA HDD only, supports S- ATA 1,2) DTV Recording : 7200rpm, NTFS Text Subtitle : smi, sub, srt, lrc, txt Image Subtitle : sub (with idx) SATA HDD only (SATA I, SATA II HDD) Through USB 2.0 Host English, French, German, Spanish, Italian, Swedish, Czech, Russian, Japanese, Chinese, Korean 40mm Brushless FAN 256 Mbyte 90~250V Free Voltage, , 50/60Hz, 50W 183x139x75 mm 1.3Kg (HDD included) Analog: Stereo FAN Control Temperature Sensing, Variable Speed 7 2 Name of Each Part 2.1 Control Panel Basic functions can be done without the remote control. 2.2 Cable Connection You can connect the TViX to a TV display or audio Amplifier using the A/V cable. There is a detail instruction for tuner box on the quick guide of optional tuner box package. COMPONENT USB PORT HD Tuner port HDMI OUT USB HOST POWER LAN Coaxial Composite/S-video Stereo Optical Out Cooling FAN 2.3 Package Contents HDMI cable is enclosed. TViX main unit Power cable A/V cable 8 USB Cable Manual TViX Remote 3 Installation and Connection 3.1 Video Connection We support HDMI, Component, S-Video, Composite video output for connecting to the TV and each output needed to be changed on the settings menu depending on the cable used. The highest quality expected by the components used is in the following order: HDMI > Component > S-Video > Composite. Connection with an Ordinary (Composite cable) TV Output Connection to HDMI Output Connect the TViX Kit HD and your TV. Using the Composite (yellow) video cable. Turn on the TViX kit and the TV. Select Video input mode as composite on your TV display, until you get the initial TViX HD screen. For the Audio, please connect the stereo cable (red,White cable). Connect the TViX kit along with the HD and your TV. By using the HDMI cables. TViX plays back high definition video (up to 1920x1080P) by using HDMI cables. HDMI cable can transmit uncompressed audio and Video signals together. No additional cables required for audio 9 Connection to S-Video Output Connection to Component Output Connect the TViX kit and your TV .using the S-Video cable. Turn on the TViX Kit and the TV. Select video input mode as S-Video on your TV display until you get the initial TViX HD screen. Additional cables required for audio. (The S-Video cable is not included and has to be purchased separately.) Connect the TViX kit and your TV. By using the component cables. Turn on the TViX Kit and the TV. Select video input mode as Component on your TV display by changing setup menu (in this case, the Component input mode) Additional cables required for audio. CAUTION After you connect the video cable to your TV, press the TV Out button repeatedly on your remote control until you get the initial TViX screen. When you connect to HDMI port, press TV OUT button until you can see EDID on VFD. * The component or S-Video cable is not included in the TViX and must be purchased separately. 10 3.2 Audio Connection Connection to 5.1CH Amplifier (Digital) Connection to 2 CH Normal TV Connect the audio cables from the left (white) and right (red) of TViX to the appropriate terminal of your TV or Hi - Fi system for sound output. If you have a multi-channel decoder/amplifier with an optical/coaxial input, you can enjoy 5.1 CH high quality sound through the coaxial or optical cables. The illustration in Below shows where to connect the coaxial cable. Optical cable connection is also done in a similar method as shown below. (These cables are not included in the package and must be purchased separately.) CAUTION If no sound is audible after connecting the Optical or Coaxial Cable, you have to change the audio setup of TViX to Digital. . 11 3.3 HDD Installation/Exchange Warning: If you change the HDD of a TViX with another HDD, the warranty will be voided. Assembling the TViX HD is very easy. Just follow the instructions below: Use a Screwdriver and Tighten the Bolts by attaching the guide board to the Hard disk Open the lid of the TViX by sliding as shown in below pictures. Connect power cable and DATA cable Put the HDD into the TViX after spreading the cable to avoid damage. Connect the cable to cross direction. 12 Close the lid of TViX. To change the hard disk, pull the hdd's guide board while pressing the lock button. 13 3.4 Initial Setting Connect the TViX HD to your TV and then turn on the TViX HD. Press OK button when you can see this TViX Logo. Select your language preference.(English) Appear the TViX screen. 14 4 TViX HD Setup Menu 4.1 Audio/Video Setting This section indicates the Audio/Video settings. You can set password to enter into setup menu. Setup password protection is available. on MISC menu Within SET UP menu. Safety lock feature need to be enabled. This will block children changing setup accidentally. The password is 1111 Audio : Digital DTS Audio : Digital WMA Audio : Analog(PCM) AAC Audio: Analog(PCM) TV Standard : NTSC -> Auto Switch TV Type : 4:3 letter Box Analog(PCM) Digital NTSC PAL Off 4:3 letter Box 4:3 Pan-Scan 16:9 Composite/S-video Component HDMI/DVI Video Port : Composite/S-video HDMI Audio : OFF Video Out Mode : 480i/576i Luminance Level : Apply Now * Audio : You can set the mode of audio output depending on audio codec used. - If you set Audio to Digital, you can set DTS and WMA to digital or analog. - Please set this according to the audio format your receiver supports. 480i/576i Auto * Analog : Select this when you connect the audio with a stereo RCA cable (the RED and WHITE cable) You can set the mode of audio output by each audio codec used. If you set Audio to Digital, you can set DTS and WMA to digital or analog. Please set this according to the audio format your receiver supports. * Digital : Select this when you connect the audio with an optical or coaxial cable for digital audio connection to the Decoder/Amplifier. There will be no analog audio out from the analog audio port of the TViX HD. * TV Standard : The default video setting of the TViX HD is COMPOSITE (NTSC/S-VIDEO or PAL C/SVIDEO). This is the most general setting and works with almost all TVs. * Auto Switch : is used when the video out is changed according to the NTSC , PAL or 24Hz format. * TV Type : 4:3 Letter Box / 4:3 Pan & Scan for ordinary TVs / 16:9 for Wide TVs like HDTV or Plasma TV. If the ratio of the TV is 4:3, select the 4:3 letter box or 4:3 Pan & Scan. If the ratio is 16:9, select 16:9. * The 4:3 Letter box can show the original ratio of the multimedia file in 16:9. 15 * The 4:3 Pan & Scan will adjust the image of the 16:9 multimedia file to the 4:3 of the TV screen by scaling the image. (Currently, not support this mode) * 16:9 can adjust any ratio of the multimedia file to the TV screen with the original image. * Video Port : If you fail to see the initial TViX HD screen after turning the unit and TV on, make sure you have chosen the right TV out option by repeatedly pressing the TV Out button on the remote control. Composite/S-Video is a default. * HDMI Audio Auto/Manual : Select Off when you use audio Amplifier or external sound with HDMI. * Video Out Mode : Select this when you connect the video through a component (YPbPr) or HDMI cable. With HDMI setting, you can select the output resolution among Auto EDID/480P/720P/1080i/1080P. Setting it to 1080i will work on all HD grade TVs. HDMI : Auto EDID/,480i/576i, 480P/576P, 720P, 1080i,1080P Component/DVI : 480i/576i, 480P/576P, 720P, 1080i,1080P * Luminance Level : Auto / 0-255 / 16-235, This option is enabled with HDMI or DVI Video out. (Auto EDID is not used) * Apply Now : After configuration, please press `Apply Now' to save the Video out state. If you want to exit the Setting, Select the EXIT button( 16 ) and then press OK on the remote control. 4.2 MISC Setting This section indicates the MISC settings. Slide Show Effect : Slide Show Delay : Date / Time Setting : FAN Speed : Language : Autorun : OSD Display : Safety Lock: Subtitle/Outline: Screen Saver Remote Controller: Smart Navigation: Font : Load Factory Setup Fade In/Out 5s Normal English ON Normal Disable White/Black Disable Common Smart SYSTEM FONT Enable Disable Enable English Korean * Slideshow Effect : This is used when playing background music while watching picture slideshows. (Currently, not supported) * Slideshow Delay : Set the slide show time interval (0 sec ­ 60 sec) * Date / Time Setting : Adjust the clock on the VFD by using the arrow and numeric keys. * FAN Speed : Select your Fan Speed. We recommend the Normal setting. * Language : Select your language preference from the options. * Autorun : You can listen to music(audio files) without display(TV). If you select "random", it plays randomly. (Off-on-Random-Repeat-Random/Repeat) * OSD Display : Select the type of OSD display. We recommend the Normal mode. * Safety Lock : Default password assigned is ("1111") .When safety Lock is enabled. * Subtitle/Outline: Change the color of the subtitle and its outline. * Screen Saver : If there is tvix_ss.jpg on the root directory, you can see this image(160*160 pixel) after 5 minutes. When the pause status or playback of audio(without slide show), Screen saver will work. * Remote Controller : You can select your remote type. We recommend the common setting. If there is collusion between other device and TViX remote, you'd better Choose A or B type referring to remote image displayed. * Smart Navigation : If there is VIDEO_TS.IFO file in the folder, automatically playback .VOB content. * Font : Show current font. * Load Factory Setup : Recover to the factory setting, after rebooting, select the video out or language again. 17 Clicking on the DVD folder will 4.3 Network Setting This section indicates the Network settings. Default Network : Wired IP Setting : Wi-Fi IP Setting : Search Wi-Fi Network TViX Network Info Network Disk1 : Network Disk2 : Network Disk3 : Network Disk4 : Restart FTP server FTP: Lan Speed : Wi-Fi DHCP DHCP Normal(NFS) Slow(SAMBA) Slow(SAMBA) Slow(SAMBA) Slow(SAMBA) Normal(NFS) ID - tvixftp, PW ­ 800510 10/100 Mbps * IP setting : Default setting is DHCP. If you cannot access via LAN with DHCP setting, use the Static IP setting. Please refer to Setting Network Configurations in TViX HD. * Network Disk : Write the PC's IP address in the Server IP. (ex: 192.168.001.128) Supports up to 4 Network disk server. There are two network method in the TViX model. One is SAMBA mode another is NFS mode. - SAMBA mode : You can play the file via network without special program, but the speed is lower than NFS mode. - NFS mode : You must install the TViX NetShare utility in to your PC, and you can play the TP or DVD jukebox without stutter. We recommend to share the NTFS file system. FAT32 file system does not contain enough information to create a lasting file name, so TViX doesn't load the file after changing the file name. For the detail instruction, you can download the NetShare installer and NetShare manual from our homepage. (www.TViX.co.kr/Eng) When several TViX Kit accesses the content from single PC, then user must prefer SAMBA setting. * TViX Network Info : You can see the information of TViX's Network. * FTP : If you want to use FTP function, you must use ID & password displayed on Network Menu within SET UP. For the detail instruction, please refer to following FAQ. - http://www.tvix.co.kr/eng/faq * Lan Speed : To use 1000 Mbps speed, please connect CAT6 cable. ** Number 1 key is changed as @ : / _ - when this key is pressed. 18 5 Easy Usage of TViX HD 5.1 Making an HDD Folder As shown in the picture below, one end of the USB cable should be connected to the USB connector of the TViX and the other end to the computer. CAUTION! The USB cable has a different shape on both ends. We use a USB 2.0 type "A" Plug(male) to "B" Plug(male). After connecting to the PC, turn on the power of the TViX. Double click the icon `My Computer' on your monitor and you will see a newly created drive; TViX as shown in picture `A'. ( The name of the drive can be changed.) For easy usage, double click TVIX and make separate folders named video, audio, and photo. Then store all your files accordingly to each folder. 19 5.2 Play Video Files When installation is successfully finished, you will see screen A. You can copy a video file into the VIDEO folder in advance. SETUP, VIDEO, AUDIO, PHOTO icons is shown. Select the Video menu by using the Left/Right arrow button. If you want to change the partition of the HDD, press the Jump/Repeat button. After selecting the icon, press the OK button. You will see 2 files in the Video folder. Using the up/down button, select the Video file content. By pressing the OK button, you will be able to playback the video file. TIPS If you want to play the next video, press the NEXT(|) button. If you want to play the previous video, press The previous(|) button. 20 5.3 Play Audio Files You can copy an audio file into the AUDIO folder in advance and play music files. If you cannot see screen A, press the MENU button on the remote control. Select the Audio menu on screen A and press the OK button. You will see the audio file content that you have just copied. Select the audio file content using the up/down button. Then by pressing the OK button on the content highlighted you are able to playback the audio file. TIPS If you want to play the next audio, press the NEXT(|) button. If you want to play the previous video, press The previous(|) button. 21 5.4 Play Image Files You may copy image files into the PHOTO folder in advance and play the image or photo files. You can press the PHOTO button on the remote control without selecting from the menu screen. Press the PHOTO button. You can see the image files that you just copied. Select the image files using the up/down button. By pressing the OK button, you can easily play the image file content. If you want to play the next image, press the NEXT(>>|) button. TIPS You can play the Video and Audio as well as the Photos with the remote control. If you connect the LAN cable or external USB, Network or USB icon is enabled on the main Menu . We're supporting up to 4 hard disk partitions, 4 network PC, 4 USB1 partition and 4 USB2 partition. 22 6 Using the remote control 6.1 Basic Functions This indicates Remote Buttons. Some buttons is not available without DTV Tuner. POWER On/Off button Go to DTV Boot as DTV Go to Video Folder Boot as Player @:/_- Mute button Go to Photo Folder Go to Audio Folder 1/2/3/4 : used to change the partition (partition 1/ partition 2/ partition 3/ partition 4) 6/7/8/9 : used to change the Drive (Local/Network/Usb1/Usb2) Zoom button Next File button Scroll button Previous File button Navigation Arrow Button REW / FF OK/Selection button Change Volume Change TV channels Adjust Subtitle Sync Information button GOTO button SETUP button DVD Menu button TV OUT button Delete file or folder STOP/Return Go to File mode Bookmark button Subtitle button Shuffle button DVD Title button Jump/Repeat button Sleep Function, Eject ODD File Copy/Move TV Record button TV Guide button Numeric Keys 1, 2, 3, 4 : used to change the partition (partition 1/ partition 2/ partition 3/ partition 4) in the TVIX Kit Hard disk Numeric Keys 6, 7, 8, 9: used to change the Partition (Local/Network/Usb1/Usb2) < Changing Batteries> - Use new batteries (2 AA size batteries are included in the package). 23 6.2 Descriptions of Each Buttons During the playback of multimedia files. Basically you can choose the file you want and press the OK button. For playback of DVD files copied to the HDD, please locate the cursor to VIDEO_TS.IFO file and press OK. You can do a full DVD navigation like you would do with a DVD player. 6.2.1 Video Playback When you press the VIDEO button on the remote control, only the VIDEO folder Contents available on the TViX HD will be displayed on the TV Screen. This only applies to the active partition if you have more than one partition. When you press the JUMP/REPEAT button on the remote control, you can select another input source. POWER On/Off button Mute button Go to Video Folder Select Multi Audio Scroll button Previous File button Zoom button Next File button When playing contents, you can skip or go to the previous contents with these buttons. When stopped, it can be operated as the page up/down keys. Play/Pause button Navigation Arrow Button REW / FF Change Volume Adjust Subtitle Sync Information button GOTO button SETUP button DVD Menu button TV OUT button Delete file or folder STOP/Return Go to File mode Bookmark button Subtitle button Shuffle button DVD Title button Jump/Repeat button Sleep Function, Eject ODD File Copy/Move 24 INFO Button : · First Press ­ Shows information of the contents. · Second Press ­ Shows the elapsed time (the progress bar is displayed on the upper left hand corner of the screen). · Third Press ­ Show remaining time. · Forth Press - INFO off · Pressing Info button while you are not playing files shows remaining HDD space. SUBTITLE Button : · Supports SMI Multi-subtitle control with the Subtitle button. · First Press : Shows the Subtitle OSD. You can change the subtitle size using the OK button. If you press UP/Down button, you can change the position of subtitle. · Subtitle color or outline is configurable on the SETUP menu. · Supports .SUB (bitmap) + .idx subtitle files · PAL format .SUB subtitles are not supported in this version. · You can go to subtitle file selection mode by pressing TITLE button (next to MENU) on a remote controller. You can navigate folders and files and press OK button on a subtitle file you want. · You can change the subtitle sync using CH +/ZOOM Button : · First Press ­ Zoom, you can change the size by pressing the arrow buttons. · Second Press ­ Full screen · Third Press ­ PAN&SCAN full screen (Currently, Not support this mode). · Fourth Press ­ Zoom Off BOOKMARK : If you stop the movie, the stop position will be automatically saved and you can resume it later anytime by pressing the "bookmark" button on the remote control. SETUP Button · Picture adjustment. Contrast Brightness Saturation Hue. DELETE Button : is used to delete the file or folder from the TViX Local hard disk. If you configure the remote controller lock up option on the SETUP menu, You must press the password ("1111") if you want to delete the file. When you do delete the file or folder, you must play the check disk periodically. TViX player is shown the disk check message if you need to check the hard disk.. http://www.tvix.co.kr/ENG/FAQ/FAQM5000U.aspx?act=RD&id=130&pg=0&CATID=3&SCATID=2 Sleep function has been implemented. - During playback You can set sleep time by pressing function key repeatedly on a remote controller. 25 - SLEEP ON will blink for 3 minutes before turning off The present playing time will be displayed with the GOTO function. FF/REW Button · AVI : 2X 4X 8X · DVD Jukebox : 2X 16X 4X 32X. 8X 16X 32X 64X. STEP / SLOW Function With Pause mode - Right button : Slow Motion playback. UP/Down Button : 15 seconds skip or 15 seconds backward * Press the VIDEO button and you can filter video files among those stored in the TViX HD. TIPS * Improved to save up to eight bookmarks on eight individual files. (It cannot save eight bookmarks on a single file.) * Recognizes AVI, MPG, VOB, CAT, M2P video files only. * A video file where the folder is setup with a password cannot be saved. * When replaying the same file, only the last play position will be saved (thus, bookmarked). * Among the bookmark list, a file deleted from the hard disk will be automatically deleted from the bookmark list as well. * Cannot save the bookmark list when in USB HOST or LAN mode. < DVD Jukebox Key > - When a movie is playing it operates as a play button. In the menu screen it operates as a select button. PAGE-DOWN - Go to the next chapter. PAGE-UP - Go to the previous chapter. AUDIO Button - You can change the audio. (International dubbing, DOLBY, 2CH, 5.1CH, DTS etc.) SUBTITLE - Shows the subtitle menu. MENU Button - Shows the DVD menu screen. TITLE Button - Shows the DVD title menu. ANGLE Button - If the DVD title has an angle function, you can change the angle. GOTO Button - You can choose the time, chapter and title. After choosing you can play directly. Number + OK - Play the chapter of the number directly. ** The operation of "PICTURE" and "VOLUME UP/DOWN" is the same for Video operation. 26 OK Button 6.2.2 Audio Playback When you press the AUDIO button on the remote control, Only the contents available on the Audio folder of TVIX HD will be displayed It applies only to the active partition(first partition) if you have more than one partition. POWER On/Off button Mute button Go to Audio Folder Previous File button Next File button OK/Selection button Change Volume Displays the audio file information About the audio file being played by clicking on the Info button. Go to the desire time frame. Type the time and press OK STOP/Return Go to file mode Random Play ** Some functions require the latest firmware updates in first. If you press the audio file, then you will get the screen with song information. Pressing the info button again will take you back to the file list, where you can choose another song to hear. If there is no Tag information, it displays basic file information. 27 - Shuffle Function (Random Playback) Press the Shuffle button to play the files of the present directory randomly. Press the Shuffle button again to disable the shuffle mode. Supports 10 Sec function when playing WMA, WAV... files. 10 sec FF/REW function is available while playing audio files. Supports Lyric Files (.lrc) If the file name of a music file and .lrc file are the same, the lyrics will be displayed automatically. Supports ID3 TAG (ID3V1) when playing music files - Press the INFO button to view the ID3 TAG (ID3V1). - You can see additional information recorded on the music files, such as the artist, album etc. - OGG also displays basic Tag information m4a extension is also supported. You can change the audio tracks on WMV files. Just press Audio key on the remote. When playing the DTS wav, adjust the TViX volume to 25 level. 28 6.2.3 Image Playback When you press the PHOTO button on the remote control, only the contents available on the PHOTO folder of TVIX HD will be displayed. It applies only to the active partition(first partition) if you have more than one partition. POWER On/Off button Mute button Go to Photo Folder Scroll button Previous File button Zoom button Next File button When playing contents, you can skip or go to the previous content with this button. When stopped, it operates as a page up/down key. OK/Selection button Change Volume Information button Shuffle button You can set the slideshow time interval at the SETUP menu. You can change the size of the picture with the ZOOM and SCROLL button. 29 Some non-standard JPEG files may not be displayed If you press the SETUP button, you will see in sequence the Brightness Contrast Hue Saturation menus. In these menus, you can adjust the Contrast, Brightness, Hue and Saturation by pressing the left/right arrow buttons. The currently supported maximum resolution of picture is 3888 x 2592. Support browsing by icon mode Make a empty file named as "icon.tvix" on the folder that you want to browse by icon. The file name for the file used for the icon files is case sensitive, it must be the exact same name as the media file except that the extension must be jpg or png(if you want to use transparency, set the transparency color as 0xC8C8C8.) To show the folder as icon, please put "folder.jpg" or "folder.png" on the folder. The maximum icon size is 720 * 480, and the best size is 100 * 136. Press the FUNCTION key on the folder, you can toggle the ICON mode. 30 6.3 Extra Features 6.3.1 Using the AutoRun Function When you want to play music with the TViX, but do not have any display devices, the following function may come in handy. Make a folder and name it, "autorun" in the root directory of the First partition. Copy media file(s) or list file in the "autorun" folder. If you want to change the setup, push the SETUP button on the remote control. Then go to the SETUP/MISC tab. Set AutoRun option to ON. If you set the AutoRun option to OFF, the function will not work. If you select `Shuffle,' files will play randomly. After setting the configuration, turn off the TViX and then turn it on again. The TViX will play the media file Contents automatically available in the Autorun folder of TVIX HDD. << Using WinAMP Playlist ( .m3u or .pls ) >> Connect TViX to PC. Open the files that is stored at TViX in " Winamp " Program. Select the folder you want at Winamp after pressing SaveList, You should save the files at the same partition where the opened files were stored. Disconnect TViX from PC safely. 31 6.3.2 Using Wallpaper If you put a JEPG file named "TViX.jpg" under the folder which you want to change the wallpaper, the wallpaper of the folder will be changed. You can select any wallpaper you want by using the various JPEG files of different folders. If you want to change the basic wallpaper, put a JPEG file named tvix.jpg under the Root directory. 1280*720 pixels is available for the size of the wallpaper. In Windows XP, when you name the JPEG file, "Hide extensions for known file types" should be unchecked in the Tool-Folder Option-View-File/Folder. Otherwise the JPEG file could be named as tvix.jpg.JPG and you would not be able to see your desired wallpaper. 32 6.3.3 Using Internet Radio * Notice - TViX can be connected via network - Download the .pls file or .m3u (WinAmp playlist) file. - Before play the .pls or .m3u file, you must set the network setting (DHCP or Static IP). - TViX supports only shoutcast streaming format and it doesn't support other proprietary streaming formats TViX is available to shoutcast method and don't support private server. Download the .pls file. You have to browse the radio station site like www.shoutcast.com SHOUTcast is Nullsoft's Free distributed streaming audio system. Thousands of broadcasters around the world are waiting for you to tune in and listen. Take a peek through the SHOUTcast directory to start browsing the most popular stations. Be sure to select your connection speed and then what kind of music you're looking for over on the right hand side for optimal listening pleasure. Right click you want to play--> select Save Target As... and save the .pls file into TViX or share folder. Edit the playlist file. You can edit downloaded playlist(.pls) file using the WinAMP program. Run WinAMP--> Open playlist and select downloaded .pls file. You can remove unnecessary items from the pls/m3u file using the PLAYLIST Save the playlist to .m3u or .pls extension. Point and click the .pls or .m3u file in the TViX hard disk or network share folder (ex: tvixhd1) After a while, you can hear the internet radio. 33 6.3.4 Using File Copy/Move TViX supports File Copy functionality without PC. You can now copy Contents from external USB hard disk to the internal hard disk of TViX and also Copy the contents within the internal hard disk of TViX.. (Currently, move function is not supported) TViX internal HDD < > internal HDD, TViX internal HDD < > Network DISK using Netshare. with wired LAN connection TViX internal HDD < > USB Host DISK (except ODD device.) Select the folder containing source files, press Function key and select Copy/Eject Icon then you will see Source on the right top of the screen. (Currently, not support folder copy) Press Ok button. (If you press 0(zero), the selection will be inverted) If file is selected, you will see red checked icon on the file list. After selecting the file, press Function key again and then on the right Top of OSD will be changed to Target from Source To cancel copying, press Function key again and then press cancel icon. In case of target mode, you can use arrow key, so that you can change the target folder. Navigate to the folder where you want to copy, and press Function key again then select Copy icon. You will see progress OSD after pressing copy/Cancel icon as shown below 34 6.3.5 Folder Security TViX supports the Folder protection by assigning the Password to the Folder .Before accessing its content Select the folder you want to assign the password on. Press the Function button on your remote controller. Select the fifth icon to set up the password like the picture below. Press a four-digit number from the Numeric key and once again press the same number for confirmation ( Ex: 1234). Press the OK button to set up. < Notice > - Replace and Remove the password icons will be activated when the password is assigned to the folder Replace the Folder Password Clear the Folder password Toggle ICON MODE Reset to the Factory Font Exit - If you insert a wrong password, TViX automatically goes to the file-selecting page. - If you forget the password, please remove tvix.pss file after connecting the TViX Kit to your PC. - The password should consist of numbers only. - You cannot delete the folder set up by a password with the delete key. Remove the password in first. 6.3.6 Using ttf Font You can change the TViX's Font manually. Currently fonts Of Windows or Linux can be Copied, whose size not exceeding 6MBytes and Placed on TVIX HD. Copy .ttf files from Windows-Fonts folder to the internal hard disk of TViX. After starting the TViX, you can see copied font files( ttf extension) Click .ttf file, and font will be changed accordingly. If you want to change to default font, press FUNCTION key on the Remote and then press Factory Font ICON ( ). 35 6.4 Network Connection 6.4.1 Connect PC via Network < When connecting the computer directly to the TViX HD > Connect the LAN cable to the LAN port of both the TViX HD and the PC. TIPS In this case, you generally use a LAN cross cable type. If the computer's LAN card was connected to an Internet line, you can install an additional LAN card to your PC and connect that LAN card to the TViX. < When connecting with IP Router or Hub > Connect the LAN cable to the LAN port for an IP Router or Hub. TIPS In this case, you generally have to use Direct LAN Cable type. SAMBA mode : You can play the file via network without special program, but the speed is lower than NFS mode. ( Currently, do not Support in Vista ) NFS mode : You must install the TViX NetShare utility in to your PC, but you can play the TP or DVD jukebox without stutter. We recommend to share the NTFS file system. FAT32 file system does not contain enough information to create a lasting file name, so TViX doesn't load the file after changing the file name. * Pease connect your TViX product to PC with enclosed USB cable once. 36 6.4.2 TViX NetShare Installation Most likely there will be an updated version of the files on our web site(www.tvix.co.kr/eng) You should download the latest TViX Netshare installer in advance. Run TViX Netshare installer and follow the on-screen prompts to install software. The "Choose Destination Location" window will appear. Click on "Next" if you want to install the Net Share in the default directory. Otherwise, you can choose a different directory by clicking on "Browse". Please select the location where you would like to share the folder. You may click the browser to find a shared folder. We recommend to share the NTFS file system. The "Setup status" window will appear. 37 Press YES button if you want to run the TViX Net Share automatically. By clicking the Finish button, the software installation is done. Press "Unblock" for the Windows Security Alert. 38 6.4.3 Using TViX NetShare Click Start, point to Program->DVICO->TViX NetShare. If TViX Netshare is working, You don't need to run this program again. After starting the Net Share program, you can see Net Share icon on the tray.. Start the setting by right clicking the Net Share icon at the low right bottom of the screen. Start Sharing : Used to start the sharing Stop Sharing : Used to stop the sharing Settings : Used to set the share folder Exit 4) After the Launch of Netshare software Application on the system. Right click on the ICON. Click on Setting. NetShare AutoRun : used to autorun when the windows re-starts. Auto Sharing at Program Run : used to run with sharing at the same time. Folder to Share : use to change the shared folder. In case of FAT32 file system, TViX doesn't load the file after changing the file name. CAUTION If you press the stop sharing when the network is connecting, you can see "TViX Sharing closed.". You must press the start the sharing on the tray again. 39 6.4.4 Sharing of Multi folders ACTION ON SYSTEM DISPLAY After the Launch of Netshare software Application on the system. Right click on the ICON. Click on Setting. Click on Browse, Corresponding to Folder 1 to Share. A window POPs UP as shown. Select the Appropriate folder, Containing Media Files from desired Drive and Click OK. Again Click on Browse, Corresponding to Folder 2~ Folder4 to Share. Select the Appropriate folder, Containing Media Files from the desired drive and Click OK. 40 6.4.5 Setting Network Configurations in TViX ACTION ON SCREEN DISPLAY There is no difference between SAMBA mode and NFS mode. Press [SETUP] on the remote control to view the setup screen. On that screen, select NETWORK setting. The default is DHCP and if you want to set Static IP, you can select Static IP on the IP setting. Click OK on Static IP. If you used the DHCP you don't need to assign the IP address because it's assigned automatically. If you cannot access via LAN with DHCP setting, we recommend using the Static IP setting. Select 'Control Panel > 'Network Connections', and select 'Status' properties by right clicking the mouse. After clicking the Support tab, press details, and you can see the Network connection details. Write IP address, Subnet Mask, default gateway and DNS server. You must write different Host address like below Figure for TVIX IP and Server IP. (Ex: 192.168.001.106 and 192.168.001.104). Write DNS Server address Similar to Gateway address. Network Disk : On the SET UP Feature .TVIX Network Info Will be displayed. 41 Default Network : Wired IP Setting : Wi-Fi IP Setting : Search Wi-Fi Network TViX Network Info Network Disk1 : Network Disk2 : Network Disk3 : Network Disk4 : Restart FTP server FTP: Lan Speed : Wi-Fi DHCP DHCP Normal(NFS) Slow(SAMBA) Slow(SAMBA) Slow(SAMBA) Slow(SAMBA) Normal(NFS) ID - tvixftp, PW ­ 800510 10/100 Mbps On Network Disk 1. Select Normal (NFS). A Window POPS UP as shown below figure. Type the appropriate Share Name as "tvixhd1". Type the Appropriate Server IP Address corresponding to IP address of the Host system. Click OK. When the setting is successfully finished, you will be able to see the shared folder. Network Disk is supported up to 4 PC systems. You can see the partition on the network icon. Press the Repeat button( or numeric 7 key) if you want to change to network driver. First Yellow Square Bracket is highlighted.Press ok.Will Display all the Folders and Content of Network disk 1. As this steps, you can change the network1 to network2 or network3 using Up/down key. Numeric 1,2,3,4 key are operated to change the network partition. 42 6.4.6 Set Network Configurations Under Windows XP (SAMBA mode) Select the folder you want to share. Right-click that folder and click `Sharing and Security' in the popup menu. Check `Share this folder' on the network and type in the share name `tvixhd1 (this is the only available one at the moment)'. Use `Everyone' if `Everyone' is displayed, otherwise you don't have to change anything. Also, add `Everyone' to the security tab. After that, the shared folder will be displayed like the following picture. 43 Move to 'Settings' > 'Control Panel' > 'Administrative Tools' > 'Computer Management' > 'Local Users and Groups' > 'Users', and double click `Guest'. CAUTION This is for Windows XP Professional. Windows XP Home users cannot see this window. If you cannot find `Administrative Tools' in the Control Panel, click "Switch to classic view" in the upper-left corner of the screen. Uncheck `Account is disabled' 44 `GUEST' must be shown as the following image (a red X mark should not be shown on `Guest'). Move to 'Control Panel' > 'Network connections', and select 'Properties' s by right click on the mouse. Remove "Guest" from the `User Rights Assignment' > `Deny access to this computer from the network' option. 45 10) Move to `Access this computer from the network', and then select `Properties' by right clicking the mouse or double clicking it. 11) Click on `Add User or Group' 12) Type in "Guest" and then click on "OK" button. 13) Press OK, and Guest will be registered. 46 < When connecting Computer to TViX directly > In this case, you have to use Cross LAN cable type generally.. If the computer's LAN card was connected to Internet line, you can mount additional LAN card to your PC and connect that additional LAN card to TViX. Move to `Control Panel' > `Network connections', and select `Properties' by right click on the mouse. When Windows 2000 or XP, Check "Allow other network users to connect through this computer's internet connection" Double click `TCP/IP->LAN card' that you want to use on your computer. You must select the additional LAN card. Check `Specify an IP address', and write `IP address' & `Subnet mask' that you want to use. Ex) IP address : 192.168.0.1 Subnet mask : 255.255.255.0 47 < When connecting with IP Router or Hub > If you have already been assigned dynamic IP address from a DHCP Server or IP Router in your local area network, then no need to write a static IP address. Then obtain the automatically assigned IP address or write an IP address & Subnet mask that the DHCP Server or the IP Router provides. Select `Control Panel' > `Network Connections', and select `Status' properties by right clicking the mouse. After clicking the Support tab, you should see an IP Address. (ex: 192.168.1.127) < Disable Windows Firewall > Move to `Control Panel' > `Network Connections', and select `Properties' by right clicking the mouse. Click the `Advanced' tab. Disable `Internet Connection Firewall'. If you use service pack 2, click `Settings' at `Windows Firewall'. Check `Off' and then click `OK' 48 6.4.7 Setting Network Configurations in TViX HD Press [SETUP] button on the remote. setup screen will be displayed. On that Set UP screen, select Network setting Network disk and type the IP address in the Server IP. (ex: 172.28.1.70) The default is DHCP and if you want to set Static IP, you can select and change Static IP on the IP setting. If you have used the DHCP you don't need to assign the IP address because it will be assigned automatically. If you cannot access via LAN with DHCP setting, we recommend to use the Static IP setting. Select 'Control Panel > 'Network Connections', and select 'Status' properties by right clicking the mouse. After clicking the Support tab, press details, and you can see the Network connection details. Write IP address, Subnet Mask, default gateway and DNS server. You must write different IP address like below image. (ex: 172.28.1.70 172.28.1.168) Forth address is different compared with PC's IP address. When the setting is successfully finished, you will be able to see the 4 PC Tray Icons. Network Disk is supported up to 4 PC Tray system. You can see the partition on the network icon like below image. You may check for detailed usage at the TViX website (www.tvix.co.kr/Eng) 49 6.4.8 Wireless Network [ Connect USB wireless module ] Connect the USB module into enclosed cradle after connecting the AP Router to a PC. You should not connect the USB module to TViX without cradle. If you connect it by force, the TViX can be damaged. Please refer to the TViX homepage(www.TViX.co.kr/Eng) for a list of compatible wireless devices. Connect the cradle to the TViX-only after you have shut down the TViX. [ Configure Wireless Network ] After booting, press SETUP-NETWORK- "Wi-Fi IP setting" and select DHCP or static IP. To set the Wi-Fi IP, refer to 3.4.3 Setting Network Configurations in TViX HD After selecting DHCP, press "Search Wi-Fi Network" for searching your AP or AP router. After the interval of searching, you can see following popup menu. Select the AP you want to connect with. A red colored icon means the AP uses WEP(Wired Equivalent Privacy) and a blue colored icon means a non-WEP AP. Currently supported of the WEP (Wired Equivalent Privacy) settings are the OPEN System and Shared System. Also, the WEP 64-Bit key is only supported and WPA (Wired Equivalent Privacy) and RADIUS (Remote Authentication Dial-In User Services) server are not supported. You have to configure the WEP setting of the AP using the AP's instruction in advance. Insert the network key using the remote's numeric keys. As you press the MENU button, the input mode for the remote will be circulated from a lower alphabet, an upper alphabet to a numerical input mode. To delete a character, press the Capture/Delete button. If you insert proper network key, you could see well-formed TViX Wi-Fi Network Info like following. If the network key is wrong or the AP doesn't work with DHCP setting, you would see some-field-missed in TViX Wi-Fi Network Info POP UP. Those fields which you might always see are SSID and MAC If you still have the problem after filling up correct key, please recheck your setting of AP or reconnect the USB port. Network disk setting : This setting is same to the wired network setting. To configure the network disk, refer to TViX FAQ or manual of NetShare Caution If you connect to a secured AP, the network performance will be 10% lower than an unsecured AP. In wireless connectivity connecting the Wireless USB to TVIX Device. TVIX kit needs to be powered off initially. and then Powered ON .Then on the Network setting Menu WIFI IP setting will be enabled For the better Wi-Fi signals, you'd better adjust the position of AP and USB module If you play high definition files over Wi-Fi, you will see the stutter. Also, depends on the environment, you may experience stuttering when you play DVD files. If you use an USB Wi-Fi adapter with other USB device, it may not work properly. * If you want to change AP, you have to search the wireless network like Step 2. * For the detailed wireless network guide, please refer to the TViX website(tvix.co.kr/eng) 50