Tomcat i875PF S5105 User's Manual Tomcat i875PF /// Revision 1.00 S5105 Copyright © TYAN Computer Corporation, 2003. All rights reserved. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tomcat, i875PF and S5105 are trademarks of TYAN Computer Corporation. Intel, Pentium 4, and combinations thereof are trademarks of Intel Corporation. Award, AwardBIOS are trademarks of Award Software Incorporated. Microsoft and Windows are trademarks of Microsoft Corporation. IBM, PC, AT and PS/2 are trademarks of IBM Corporation. ATI, ATI RAGE is a trademark of ATI Technologies Incorporated. Winbond is a trademark of Winbond Electronics Corporation. Portable Document Format (PDF) is a trademark of Adobe Corporation. Information contained in this document is furnished by TYAN Computer Corporation and has been reviewed for accuracy and reliability prior to printing. TYAN assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TYAN products including liability or warranties relating to fitness for a particular purpose or merchantability. TYAN retains the right to make changes to product descriptions and/or specifications at any time, without notice. In no event will TYAN be held liable for any direct or indirect, incidental or consequential damage, loss of use, loss of data or other malady resulting from errors or inaccuracies of information contained in this document. i http://www.tyan.com Tomcat i875PF S5105 Table of Contents Table of Contents Before you begin... ................................................................................................................. iii Chapter 1: Introduction............................................................................................................ 1 1.1 ­ Congratulations!......................................................................................................... 1 1.2 ­ Hardware Specifications ............................................................................................ 1 Chapter 2: Board Installation .................................................................................................. 3 2.1 ­ Board Parts ................................................................................................................ 4 2.2 ­ Block Diagram............................................................................................................ 5 2.3 ­ Jumper and Connector Settings ................................................................................ 6 2.4 ­ Mounting the Motherboard ....................................................................................... 13 2.5 ­ Installing the Memory ............................................................................................... 14 2.6 ­ Memory Installation Procedure ................................................................................ 15 2.7 ­ Installing the Processor and Heatsink...................................................................... 16 2.8 ­ Attaching Drive Cables ............................................................................................ 18 2.9 ­ Installing Add-In Cards............................................................................................. 20 2.10 ­ Connecting External Devices................................................................................. 21 2.11 ­ Installing the Power Supply.................................................................................... 21 2.12 ­ Finishing Up ........................................................................................................... 22 Chapter 3: BIOS Setup........................................................................................................... 23 3.1 ­ Main BIOS Setup ..................................................................................................... 25 3.2 ­ Standard CMOS Features ....................................................................................... 26 3.3 ­ Advanced BIOS Features ........................................................................................ 28 3.4 ­ Advanced Chipsets Features................................................................................... 31 3.5 ­ Integrated Peripherals.............................................................................................. 32 3.6 ­ Power Management Setup ...................................................................................... 37 3.7 ­ PnP/PCI Configurations ........................................................................................... 41 3.8 ­ PC Health Status ..................................................................................................... 42 3.9 ­ Frequency/Voltage Control ...................................................................................... 43 3.10 ­ Load Fail-Safe Defaults ......................................................................................... 44 3.11 ­ Load Optimized Defaults........................................................................................ 44 3.12 ­ Supervisor/User Password Setting ........................................................................ 45 3.13 ­ Exit Selecting ......................................................................................................... 46 Chapter 4: SATA/RAID Setup ................................................................................................ 48 4.1 BIOS Configuration ..................................................................................................... 48 4.2 Installing Serial ATA (SATA) hard disks ..................................................................... 48 4.3 Creating, Deleting, and Resetting RAID Volumes ...................................................... 49 4.4 Create RAID 0 or RAID 1 Volume............................................................................... 50 4.5 Delete RAID Volume ................................................................................................... 51 4.6 Reset Disks to Non-RAID ........................................................................................... 52 4.7 Pre-Installation of the Intel® RAID Driver ................................................................... 53 4.8 Using the Intel® Application Accelerator RAID Edition Utility ..................................... 54 4.8.1 Installing the Intel® Application Accelerator RAID Edition ....................................... 54 4.8.2 RAID Migration Instructions ..................................................................................... 54 4.8.3 Uninstalling the Intel® Application Accelerator RAID Edition................................... 60 Chapter 5: Diagnostics .......................................................................................................... 62 5.1 Beep Codes ................................................................................................................ 62 5.2 Flash Utility.................................................................................................................. 62 Appendix I: Glossary ............................................................................................................. 63 Appendix II: Post Error Code for BIOS ................................................................................ 69 Appendix III: SMDC Information ........................................................................................... 74 Technical Support ............................................................................................................. 75 ii http://www.tyan.com Tomcat i875PF S5105 Before you begin... Before you begin... Check the box contents! The retail motherboard package should contain the following: 1x Tomcat i875PF S5105 motherboard 1x 34-Pin floppy drive cable 1x Ultra-DMA-133/100/66/33 IDE cable 1 x Serial ATA power cable 2 x Serial ATA cable 1x Tomcat i875PF S5105 User's Manual 1x Tomcat i875PF S5105 Quick Reference Guide 1x TYAN driver CD 1x I/O shield 1 x Serial ATA driver diskette If any of these items are missing, please contact your vendor/dealer for replacement before continuing with the installation process. iii http://www.tyan.com Tomcat i875PF S5105 Chapter 1: Introduction Chapter 1: Introduction 1.1 ­ Congratulations! You have purchased one of the most powerful solutions for the Intel® Pentium 4 processor, the Tomcat i875PF S5105 Based on Intel® 875P chipset, this platform offers convenient remote Intelligent Platform Management Interface (IPMI) monitoring through a Server Management Daughter Card. The Tomcat i875PF S5105 are Flex ATX form factor, onboard dual Gigabit Ethernet port, Serial ATA, and an onboard ATI 8MB PCI RAGE XL VGA. Remember to visit TYAN's Website at http://www.tyan.com. There you can find information on all of TYAN's products with FAQs, distributors list, and BIOS setting explanations. 1.2 ­ Hardware Specifications PROCESSOR Socket 478 Intel® Pentium 4 Processors, "Northwood/Prescott" On-board VRM 10.0 800/533/400 MHz System Bus support CHIPSET Intel® 875P chipset MCH + ICH5R Winbond W83627HF Super I/O chip EXPANSION SLOTS Total two 32-bit/33MHz PCI v2.2 slots MEMORY Dual Channel Memory Bus Four DDR DIMM slots DDR 266/333/400 supported Max. 4 GB with Unbuffered DDR Supports non-ECC/ECC type memory modules Registered RAM not supported INTEGRATED LAN Intel® 82547 CSA 10/100/1000 controller Intel® 82540/82541 PCI 10/100/1000 controller WOL/PXE/ASF2.0 support Two RJ-45 LAN connectors w/ LEDs INTEGRATED PCI GRAPHICS ATI RageTM XL PCI graphics controller 8MB Frame Buffer of video memory BIOS Award BIOS on 4Mb Flash (FWH) ACP1.1/APM1.2 User settings of HW monitoring Auto configuration of IDE hard disk types Quick boot and multiple boot options LAN remote boot (PXE) support Event Log support (4K EEPROM) Power Management: S1, S3, S4 and S5 SYSTEM MANAGEMENT W83627HF HW monitoring One 3-pin CPU fan header with temperature controlled Two 3-pin chassis fan headers with temperature controlled 2-pin Chassis Intrusion header Two temperature sensors and voltage monitoring Watchdog timer Supports Tyan Server Management Daughter card (SMDC*) via Tyandefined header 1 http://www.tyan.com Tomcat i875PF S5105 INTEGRATED I/O One Floppy connector for up to two drives Two 9-pin UART Serial ports (one header via cable) Four USB 2.0 Ports (2 rear ports and 2 headers) PS/2 Mouse & Keyboard ports INTEGRATED PCI ATA AND SATA Intel® ICH-5 or ICH-5R Up to four Enhanced UDMA and SATA devices Dual channel UDMA Master mode for up to 4 devices - Supports for UDMA 33/66/100 IDE drives and ATAPI compliant devices Support two independent SATA ports - Data transfer at 1.5 Gb/s - Supports RAID 0 or 1 Chapter 1: Introduction FORM FACTOR Flex ATX (9.0" x 8.0") ATX12V power connectors Side by side PS2 Mouse/Keyboard connectors Stacked 2 USB connectors and RJ45 LAN connector w/LEDs One Serial connector One VGA connector One RJ45 LAN connectors w/ LEDs REGULATORY FCC Class B (Declaration of Conformity) CE (Declaration of Conformity) * Tyan SMDC is a System Management Daughter Card. It enables you to access the hardware remotely and perform monitor, control, and diagnose activities effectively. See Appendix III (Pg 75) for details In Tyan SMDC. Software Specifications OS (Operating System) Support Microsoft Windows Server 2000 Microsoft Windows Advanced Server 2000 Microsoft Windows XP Microsoft Windows Server 2003 Red Hat 8.0, 9.0 FreeBSD5.1 Solaris 9.0 Other distributions of Linux pending validation Note: TYAN reserves the right to add support or discontinue support for any OS with or without notice. 2 http://www.tyan.com Tomcat i875PF S5105 Chapter 2: Board Installation Chapter 2: Board Installation Installation You are now ready to install your motherboard. The mounting holes pattern of the Tomcat i875PF S5105 matches the Flex ATX specification. Before continuing with installation, confirm that your chassis supports a standard Flex ATX motherboard. How to install our products right.... the first time! The first thing you should do read this user's manual. It contains important information that will make configuration and setup much easier. Here are some precautions you should take when installing your motherboard: (1) Ground yourself properly before removing your motherboard from the antistatic bag. Unplug the power from your computer power supply and then touch a safely grounded object to release static charge (i.e. power supply case). For the safest conditions, TYAN recommends wearing a static safety wrist strap. Hold the motherb ...