User manual UFREE SCOOTER SCOOTER ELETTRICO FS-E20B

UFREE SCOOTER www.scooter-manufacturer.com ELECTRIC SCOOTER FS-E20B USER MANUAL UFREE SCOOTER www.scooter-manufacturer.com TABLE OF CONTENTS 1) INTRODUCTION..............................................................................2 2) DESCRIPTION OF SYSTEM...........................................................3 3) SAFETY WARNINGS........................................................................4 4) OPERATION AND FEATURES........................................................5 A) ASSEMBLY B) RIDE AND RANGE C) SPEED-CHANGING SWITCH AND BRAKE HANDLE D) POWER SWITCH AND CHARGE SOCKET E) CHARGE BATTERY AND BATTERY CARE F) DRIVE BELT ADJUSTMENT AND REPLACEMENT G) REPLACING OR REPAIRING TYRES 5) IMPORTANT BATTERY INFORMATION.....................................8 6) TROUBLESHOOTING GUIDE.........................................................9 CHARGE BATTERY AFTER EVERY USE 1 UFREESCOOTER www.scooter-manufacturer.com |INTRODUCTION| CONGRATULATIONS! YOU HAVE MADE A GREAT CHOICE IN SELECTING A BAUMAN ELECTRIC SCOOTER YOUR SCOOTER WILL PROVIDE YOU WITH HOURS OF FUN AND ENJOYME? WHILE HELPING YOU TO GET SOME OF THAT MUCH NEEDED EXERCISE W ALL WANT TODAY. YOUR SCOOTER IS ALSO A PRACTICAL "GREEN" TRANSPORT VEHICLE, IT SMALL, WHISPER QUIET, COMPLETELY SMOG FREE AND ENERGY EFFICIENT YOUR ELECTRIC SCOOTER IS EASILY FOLDED TO TAKE IT WITH YOU IN YOUR CAR OR ON A BUS OR TRAIN. YOUR ELECTRIC SCOOTER IS PROBABLY THE WORLDS FIRST PORTABLE PERSONAL ELECTRIC VEHICLE REPRESENTING 21* CENTURY TECHNOLOGY. ALTHOUGH YOUR ELECTRIC SCOOTER WILL DELIVER THE BEST RESULTS ON A SMOOTH FLAT TERRAIN, YOU SHOULD ALWAYS COMPLEMENT ITS POWER BY SIMPLY KICKING ALONG IN THE TRADITIONAL WAY. TO BE SURE THAT YOU USE YOUR ELECTRIC SCOOTER SAFELY AND PROPERLY, PLEASE REA THIS MANUAL COMPLETELY BEFORE RIDING. PAY PARTICULAR ATTENTION TO THE SAFETY PRECAUTIONS AND FOLLOW THEM CAREFULLY FOR HAPPY, CAREFREE RIDING. LIKE ALL POWERED MOVING VEHICLES, YOUR SCOOTER REQUIRES CARE AND MAINTENANCE TO DELIVER DEPENDABLE USE FOR A LONG TIME TO COME. THANK YOU FOR SELECTING OUR ELECTRIC SCOOTER! WE HOPE YOU WILL ENJOY HOURS OF SAFE AND EXCITING RIDING! ALWAYS WEAR A HELMET AND SAFETY GEAR 2 UFREE SCOOTER www.scooter-manufacturer.com Speed changing switch Indicator switch and horn Saddle Brake lever Brake light Quick locks Lamp Front fork Indicators Battery box Chain drive Locking tabs & bolts WEIGHT (Including Battery):42kgs LOAD CAPACITY: l00kgs BRAKE: Hand Brake FULL CHARGE MILAGE: 35km SPEED: 35kph SYSTEM VOLTAGE: 36volts MOTOR POWER: 350W CHARGE VOLTAGE: 110-230V BATTERY: 12v 12Ah x3 CHARGE TIME: 4-6 hours WHEELS: Rubber Pneumatic Tyres CHARGE BATTERY AFTER EVERY USE 3 UFREE SCOOTER www.scooter-manufacturer.com SAFETY BEFORE YOU RIDE YOUR ELECTRIC SCOOTER, PLEASE READ CAREFULLY THE FOLLOWING · The recommended age and maximal weight for riding the scooter 10 years or older and 200 pounds. · Read this manual thoroughly and follow all the safety and maintenance recommendations made here. · Inspect your scooter thoroughly before each use for fear that there loose or missing parts. · To avoid damage to the motor and the deck, do not overload. · Avoid unintentional starts. · Do not leave power switch on when not in use. · Do not use in rain as short circuits may happen to electrical parts. · Do not place battery near fire or heat. This may cause the battery explode. · Do not expose the charger to moisture or water. · To avoid damage to battery do not use charger if dropped or damaged in any way. · Keep hands and feet away from moving parts. · Do not touch the motor or wheels while they are rotating. · Avoid gravel, sand, grass, mud, water and rough surfaces. · Never ride with more than one person on scooter. · Brakes are designed to control speed as well as the vehicle, Practise braking for slow down and smooth stops. · Never drink alcohol before operating vehicle. · Never leave small children unattended with vehicle. ALWAYS WEAR A HELMET AND SAFETY GEAR 4 UFREE SCOOTER www.scooter-manufacturer.com OPERATION AND FEATURES ASSEMBLY 1. Lift the handlebar and put the fixed handle into the front fork, then tighten the quick lock. 2. Put the pole of the seat into the fixed tube then tighten the lock. 3. Fit front wheel into forks and tighten bolt with tools provided. 4. Please ensure all locks and bolts are fully tightened before use. Attention: when folding does the complete opposite. RIDE AND RANGE Your electric scooter will perform best on smooth and flat terrain. To start your scooter, give it a kick push and turn the speed control switch. Kicking the ground with your feet while the motor is activated to increase your speed and range. With a fully charged battery, your new scooter can cover up to 30 kilometers. Actual speed will depend on a number of variables including load, tyre pressure, battery power, weather conditions, etc, Try to charge your scooter after every ride, no matter how short. OPERATION AND FEATUREASSEMBLY CHARGE BATTERY AFTER EVERY USE 5 UFREE SCOOTER www.scooter-manufacturer.com SPEED-CHANGING SWITCH AND BRAKE HANDLE For safety purposes, your scooter uses a speed-changing switch when released it will return to the "OFF" position. Turn the speed-changing switch towards your body to raise the speed of the scooter and away from your body to lower the speed. The brake handle will momentarily shut off the power and stop the scooter when you press it. To save energy, the braking system will be used only when needed. Always keep brake applied when stationary to avoid accidental activation. POWER SUPPLY SWITCH AND CHARGE SOCKET The power key switch is located on the left side of the scooter. Use this switch to avoid accidental starts. To charge the battery, located next to the key switch is the charge socket. Your charge has two cords on it, one fits the mains 240 volts voltage and the other fits the charge socket that has a lug and will only fit one way. ALWAYS WEAR A HELMET AND SAFETY GEAR 6 UFREE SCOOTER www.scooter-manufacturer.com DRIVE BELT ADJUSTMENT AND REPLACEMENT Periodic adjustment of the drive belt will be necessary to maintain proper tension. If the belt is too loose, it will make a "popping" noise while accelerating, indicating the need for immediate adjustments. Before adjusting the belt drive, disconnect the battery power to prevent accidental starts or shocks. Loosen the rear axle nuts until the wheel can easily move backwards and forwards by hand. Rotate the belt adjuster on the rear axle until the proper tension is achieved. Tighten the axle nuts and recheck the belts tension. Belt needs to be tightened after several hours use when new. If the belt is broken and needs replacement, use the above procedure, but remove the rear wheel entirely to install new belt. ALWAYS DEFLATE THE TYRE BEFORE DISASSEMBLING THE WHEEL REPLACING OR REPAIRING TYRES Remove the wheel from the scooter and deflate tyre. Remove the four hub bolts. Remove the inner and outer wheel and repair or replace tyre. Reassemble the hub being careful not to puncture the inner tyre between the hub halves. Inflate tyre to proper pressure (28-32psi) Reinstall the wheel onto the scooter. CHARGE BATTERY AFTER EVERY USE 7 UFREE SCOOTER www.scooter-manufacturer.com IMPORTANT BATTERY INFORMATION BATTERY CARE 1) Store and charge the battery at a temperature between 50f (10c) and 100f (38c), try to keep your battery charged. Keep the battery terminals clean and the connections tight. 2) Handle your battery and the charger with care and be careful not to dreg Running the battery all the way down is bad for its overall life. Try to charge the battery after every use. Always disconnect the power switch when working on the scooter or for shipping. NEVER CHARGE MORE THAN 12HOURS AT A TIME 3) Re-charge your battery as soon as you can to ensure long life. 4) To protect your battery and ensure long life, the battery should be charged at least once a month even if the scooter is not being used. Do not charge the battery for more than 12 hours. Do not charge your battery in temperatures below 50f (10c). Bring your battery indoors to charge when the weather is cold. CHARGE THE BATTERY Plug the charge socket into the scooter. Plug the power socket into the wall socket (110-240v). Charge battery according to input voltage of the charge Do not charge for more than 12 hours. When charging is complete, remove plug from wall FIRST! Then remove the connector from scooter. Charge the battery for 6-8 hours before first using. ALWAYS CONNECT CHARGER TO SCOOTER BEFORE MAIN POWER IS SWITCHED ON. BATTERY PACK REPLACEMENT Even with proper care, recharging batteries will not last forever. When the battery needs to be replaced, please contact your nearest authorized dealer This product contains a sealed lead-acid battery and it can be recycled. To preserve natural resources, please recycle the battery properly. Law prohibits disposal of lead-acid batteries in ordinary trash. Consult your local waste authority for information regarding available recycling option ALWAYS WEAR HELMET AND SAFETY GEAR 8 UFREE SCOOTER www.scooter-manufacturer.com TROUBLE SHOOTING GUIDE PROBLEM A. Motor does not start POSSIBLE CAUSES 1 .Battery not connected 2. Power switch is off 3. Broken drive belt 4. Battery is drained 5. Electrical fault ACTION 1. Connect battery 2. Switch on 3. Replace belt 4. Charge battery 5. Check connections 1. Adjust brake 2. Call Technician 1. Wait 5 seconds 2. Restore brake 1. Charge battery 2. Inflate tyre 3. Kick more 4. Tighten belt 5. Replace battery B. Rear Wheel doesn't turn 1. Brake too tight 2. Motor trouble C. Motor shuts of during use 1. Circuit breaker tripped 2. Pull brake firmly D. Insufficient Range 1. Battery not charged 2. Low tyre pressure 3. Hilly terrain 4. Popping sound 5. Damaged battery NOTE: DO NOT RIDE ON PUBLIC STREETS. ALWAYS WEAR HELMET AND SAFETY GEAR. THE ELECTRIC SCOOTER IS DESIGNED FOR AGES 10 AND UP. THE MANUFACTURER WILL TAKE NO RESPONSIBILITY FOR DAMAGE OR INJURIES, WHICH MAY OCCUR WHEN USING THIS SCOOTER. 9 UFREE SCOOTER www.scooter-manufacturer.com THANK YOU AND ALWAYS REMEMBER TO RIDE SAFELY! ENJOY YOUR RIDING! WE WELCOME YOUR COMMENTS! 10