INTRODUCTION Congratulations on your purchase of your U-Line drawer unit. A pioneer in the field for more than 40 years, U-Line is the world's number one manufacturer of built-in, under-counter ice making and specialty refrigeration products. U-Line dedicates 100% of its research and development to these products. The result: U-Line technology leads the market with innovation, design, depth of product line and performance. U-Line also backs customers with a strong dealer network. U-Line's commitment to quality even extends to environmentally safe packaging. U-Line products are making life more convenient in homes, businesses, and hotels around the world. PLEASE READ all instructions completely before attempting to install or operate the unit. The icons 2075DWRR refrigerator unit, CO2075DWR refrigerator/ice maker combination and 2075DWRWC Wine Captain® drawer units are used throughout this manual to help you identify the specifics to your U-Line product. Once you have your unit installed, we suggest you keep this manual in a safe place for future reference. Should any problems occur, refer to the TROUBLESHOOTING section of this manual. This information will help you quickly identify a problem and get it remedied. In the event you require assistance, please contact the dealer where you purchased your unit. 1 User's Manual PLEASE RECORD YOUR MODEL'S INFORMATION Whenever you call to request information or service, you will need to know your model number and serial number. You can find this information on the serial plate located on the inside wall of your unit and on the product registration card. PRODUCT REGISTRATION CARD The package containing this manual also includes your product registration information. Warranty coverage begins at the time your unit was purchased. NOTE Complete and mail the Product Registration Card as soon as possible to validate the registration date. You may also register the product online at www.U-LineService.com. If you do not return your Product Registration Card, U-Line will use the date of sale to the U-Line distributor as the first date of warranty for your unit. Please also record the purchase date of your ULine unit and your dealer's name, address and telephone number. Model Number: Serial Number: Purchase Date: Dealer Name: Dealer Address: ______________________________________ ______________________________________ ______________________________________ ______________________________________ ______________________________________ Dealer Telephone: ______________________________________ Keep this manual and the sales receipt together in a safe place for further reference. 2 TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . SAFETY PRECAUTIONS . . . . . . . . . . . . INSTALLATION . . . . . . . . . . . . . . . . . LEVELING THE UNIT . . . . . . . . . . . . . . CONNECTING THE WATER SUPPLY . . . . BUILT-IN INSTALLATION . . . . . . . . . . . CUSTOM DRAWER PANELS . . . . . . . . INITIAL START-UP AND ADJUSTING THE TEMPERATURE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . .4 . .6 . .9 .11 .13 .14 . . . . . . . . . . . . . . . . . .22 TEMPERATURE CONTROLLER . . . . . . . . . . . . . . . . . . . . .23 TEMPERATURE CONTROLLER . . . . . . . . . . . . . . . . . . . . .24 TEMPERATURE CONTROLLER . . . . . . . . . . . . . . . . . . . . .26 OPERATION . . . . . . . . . . . . ICE MAKER . . . . . . . . . . . . CLEANING & MAINTENANCE . STAINLESS STEEL MODELS STORAGE . . . . . . . . . . . . . . TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 .36 .38 .38 .41 .42 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . .43 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . .44 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . .45 IF SERVICE IS REQUIRED . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 3 User's Manual SAFETY PRECAUTIONS Do not attempt to install or operate your unit until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a Danger, Warning or Caution based on the risk type. DEFINITIONS ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. ! DANGER ! DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ! WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. ! CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. Indicates installation, operation or mainenance information which is important but not hazard related. 4 GENERAL PRECAUTIONS ! DANGER ! RISK OF CHILD ENTRAPMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so that children may not easily climb inside. ! WARNING · Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected. · Altering, cutting of power cord, removal of power cord, removal of power plug, or direct wiring can cause serious injury, fire and/or loss of property and/or life and will void the warranty. · The anti-tip kit must be installed on this unit before it is used. Never use the drawers as steps or a shelf to support more than the drawers' content. CAUTION · Do not lift unit by drawer's handle. · Use care when moving the unit. Some edges are sharp and may cause personal injury. Wear gloves when moving or repositioning the unit. · Allow unit temperature to stabilize for 24 hours before use. · Failure to clean the condenser every three months can cause the unit to malfunction. This could void the warranty. · Never install the unit behind closed doors. Be sure front grille is free of obstruction. Obstructing free air flow can cause the unit to malfunction, and may void the warranty. CAUTION · Use only genuine U-Line replacement parts. Imitation parts can damage the unit, and may void the warranty. 5 User's Manual INSTALLATION SITE PREPARATION Your U-Line drawer unit must be installed under a counter or in a wall. These units are designed so they can be installed next to a wall. The crisper in the either side. 1. and the caddy in the can be accessed from Position the unit on a flat, level surface, capable of supporting the entire weight of the unit. Remember the unit will be significantly heavier once it is fully loaded. This unit requires grounded and polarized 115 VAC, 60Hz, 15A circuit (normal household current). 2. ! DANGER ! ELECTROCUTION HAZARD! Electrical Grounding Required. This appliance is equipped with a three prong (grounding) polarized plug for your protection against possible shock hazards. · NEVER remove the round grounding prong from the plug. · NEVER use a two-prong grounding adapter. · NEVER use an extension cord to connect power to the unit. Where a two-prong wall receptacle is encountered or a longer power cord is required, contact a qualified electrician to have it replaced in accordance with applicable electrical codes. 6 Your U-Line Drawer unit is designed so it can be installed next to the wall on either side (Figures 1, 2). DWR001A Figure 1 ­ Right wall installation ! WARNING The anti-tip kit must be installed on this unit before it is used. Never use the drawers as steps or a shelf to support more than the drawers' content. 3. These units must be installed in a wall or under a counter top to allow for the installation of the anti-tip kit. The drawer unit can be installed with an appliance or fixture located in front of it, as long as there is adequate clearance for the drawer to be opened and removed when servicing (Figure 3). U-Line recommends you consider additional clearance in front of the open drawer for convenience. 7 User's Manual CABINET OR WALL DWR002A Figure 2 ­ Left wall installation DWR003A Figure 3 ­ Front Clearance 8 4. 5. ­ Connect the water supply line. See CONNECTING THE WATER SUPPLY for installation requirements. Position the unit to allow free air flow through the front grille (Figure 4). OFF ON INTAKE EXHAUST DWR004 Figure 4 6. Wipe inside of unit and all inside drawer components with a clean, water dampened cloth only. LEVELING THE UNIT It is important that the unit is level. All ÉchelonTM Series units are equipped with adjustable feet for leveling and height adjustment (Figure 5). To level the unit: 1. Adjust all four leveling feet evenly so that the top of the cabinet is at the desired installation height. Using a level of at least two feet in length, measure the level of the floor where the unit is to be installed. Measure back-to-front and side-to-side and note the measurements. With the unit on a level surface, adjust the feet, as appropriate, to compensate for the floor level measurements noted in Step 2. 2. 3. 9 User's Manual 4. Place the unit in position where it is to be installed. Re-check cabinet height and levelness (Figure 6) and adjust if necessary. RAISE LOWER DWR005 Figure 5 LEVEL TWO PLACES DWR021 Figure 6 5. installation. - Gently push unit into position to prepare for built-in 10 CONNECTING THE WATER SUPPLY Install a 1/4 inch outside diameter copper water line (not supplied with unit) from the nearest COLD water pipe. When connecting the water supply, follow these guidelines: · Review the local plumbing codes before you install the unit. · In most instances, the cold water supply will come from the basement through a hole in the floor. · The water pressure should be between 15 and 150 psi. · Install a shut-off valve in the 1/4 inch outside diameter supply line (not supplied with unit). · Connect sufficient tubing to the unit to allow the unit to be moved for cleaning and servicing. However, make certain that the tubing is not pinched or damaged during installation. · U-Line recommends the use of copper tubing for installation. 1. Locate the compression fitting and ferrule packed in the unit. Slide the compression fitting and ferrule over the 1/4 inch outside diameter water supply line. Do not use thread sealing compound or tape. Using two wrenches, tighten the compression fitting on the supply line (see Figure 7). Do not overtighten. 2. Carefully bend the water supply line into position and connect the line to the solenoid valve (see Figure 8). Avoid kinking the water supply line. WATER CONNECTION UL103_CO UL134_CO Figure 8 Figure 7 11 User's Manual 3. For recessed installations, allow extra water supply line length to provide slack for easy removal from the recessed area (see Figure 9). This will also safeguard against kinking the line. DWR033 Figure 9 CAUTION If you are not intending to use the ice maker and do not connect the water supply (or turn the supply valve off), it is imperative to raise the bucket arm of the ice maker (see Figure 10). Failure to raise the bucket arm may result in damage to the water valve. UL002A_CO Figure 10 NOTE After completing the installation, turn on the water and recheck water connection for leaks. Apply additional tightening if needed. Do not use thread sealing compound or tape. 4. 5. Plug in the power cord. Gently push the unit into position to prepare for built-in installation. 12 BUILT-IN INSTALLATION Your U-Line product is designed for built-in installation only. When built-in, it does not require additional air space for the top, sides, or rear. However, the front grille must NOT be obstructed. NOTE Required for ease of installation and door opening, you must allow an additional 1/4" to width of unit. Unit Dimensions Width 23-15/16" Height 34-1/8" Depth* 24" * For full overlay drawer panels, add 3/4". NOTE The additional depth required for full overlay drawer panels only applies to the and . The to accept full overlay drawer panels. is not designed Once the unit is leveled and placed into the wall or under a cabinet, it is ready to be secured to the wall or cabinet with the anti-tip system (Figure 11). Follow the instructions included with the anti-tip kit. ! WARNING The anti-tip kit must be installed on this unit before it is used. Ne ...