User manual ULINE ORIGINS 1115R

Use and Care Guide Refrigerator Models: 1115R, 1175R, 29R Beverage Center Model: 1175BEV 29R 1175BEV 1115R 1175R 1 Introduction Congratulations on your purchase of a U-Line refrigeration product. A pioneer in the field for more than 40 years, U-Line Corporation is the world's number one manufacturer of built-in, under-counter, specialty refrigeration and ice making products. U-Line dedicates 100% of its research and development to these products. The result: U-Line technology consistently leads the market with innovation, design, depth of product line and performance. U-Line products are making life more convenient in homes, businesses, and hotels around the world. U-Line supports its products with a strong dealer network, and its commitment to quality even extends to environmentally safe packaging. IMPORTANT READ all of the instructions in this guide completely before operating the unit for the first time. For future reference, keep this guide in a safe, accessible location. If you need additional information or assistance, please contact U-Line Corporation directly. Contact information appears on the rear cover of this guide. If you have a problem with the operation of this product, the SERVICE section of this guide will assist you in quickly identifying common problems and provide information on possible causes and remedies. If your product needs service, contact U-Line directly. Warranty Registration Your U-Line Corporation Limited Warranty is located on the inside rear cover of this guide. To validate your warranty, the product and its original purchase date must be registered. A Warranty Registration Card has been included for this purpose in the package containing this manual. Complete and mail the Warranty Registration Card, or register your product online at www.U-LineService.com as soon as possible after purchase. If your product registration is not on file and a request for warranty coverage is received, the date of sale to the U-Line Selling Dealer or Distributor will be established as the first date of warranty coverage for your product. Please Record Your Model Information When you request additional information or service, you will be asked for your products model and serial numbers. You can find this information on the serial plate located on the upper right or rear wall in the interior of your unit. This information also appears on the warranty registration card. 1 2 ULIN_0023_A Figure 1 Please record the model number (Figure 1, 1), serial number (Figure 1, 2), date of purchase, and dealer contact information for your U-Line product below: Model Number: _____________________________________________________ Serial Number: _____________________________________________________ Purchase Date: _____________________________________________________ Dealer Name: _____________________________________________________ Dealer Address: _____________________________________________________ Dealer Telephone: _____________________________________________________ 2 1115R, 1175R, 29R, 1175BEV 2 Table of Contents Introduction ...............................................................................................................................2 Warranty Registration .......................................................................................................2 Please Record Your Model Information ...........................................................................2 Table of Contents .......................................................................................................................3 Safety Precautions ......................................................................................................................5 Safety Alert Definitions .....................................................................................................5 General Precautions ...........................................................................................................5 Product Features ........................................................................................................................6 Origins Refrigerator Models 1115R, 1175R, 29R ..............................................................6 Origins Beverage Center Model 1175BEV ........................................................................6 Operation ...................................................................................................................................7 Initial Startup .....................................................................................................................7 Interior Lighting .................................................................................................................7 Electronic Control Panel ....................................................................................................8 Manual Temperature Control ...........................................................................................9 Normal Operating Sounds .................................................................................................9 Wine Stocking Recommendations ..................................................................................10 Outdoor, Marine and RV Usage ......................................................................................10 Storage, Vacation, Moving ..............................................................................................10 Product Disposal ...............................................................................................................10 Wine Guide ...............................................................................................................................11 Wine Recommendations ..................................................................................................11 Cleaning and Maintenance .....................................................................................................13 General Cleaning .............................................................................................................13 Maintenance ....................................................................................................................13 Service .......................................................................................................................................24 Before Calling for Service ................................................................................................24 If Service is Required ........................................................................................................24 Replacement Parts ...........................................................................................................24 Troubleshooting Guide ....................................................................................................25 Electronic Control Quick Guide .......................................................................................27 U-Line Corporation Limited Warranty ....................................................................................31 1115R, 1175R, 29R, 1175BEV 3 This page intentionally left blank 4 1115R, 1175R, 29R, 1175BEV 3 Safety Precautions IMPORTANT PLEASE READ all instructions completely before attempting to install, operate, or service your unit. · Proper installation procedures must be followed if this unit is being initially installed, or is moved to a new location after being in service. An INSTALLATION GUIDE for your unit, providing complete installation information is available from U-Line Corporation directly, and must be consulted before any installation is begun. U-Line contact information appears on the rear cover of this guide. · This unit requires connection to a grounded (three-prong), polarized receptacle that has been placed by a qualified electrician in accordance with applicable electrical codes. WARNING SHOCK HAZARD - Electrical Grounding Required. · Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected. · Never remove the round grounding prong from the plug and never use a two-prong grounding adapter. · Altering, cutting of power cord, removal of power cord, removal of power plug, or direct wiring can cause serious injury, fire and/or loss of property and/or life, and will void the warranty. · Never use an extension cord to connect power to the unit. · Always keep your working area dry. CAUTION · Use care when moving and handling the unit. Use gloves to prevent personal injury from sharp edges. · If your model requires defrosting, DO NOT use any type of heater to defrost. Using a heater to speed up defrosting can cause personal injury and damage to the inner lining. Safety Alert Definitions Safety items throughout this guide are labeled with a Danger, Warning or Caution based on the risk type: DANGER Danger means that failure to follow this safety statement will result in severe personal injury or death. IMPORTANT · Do not lift unit by door handle. · Never install or operate the unit behind closed doors. Be sure front grille is free of obstruction. Obstructing free air flow can cause the unit to malfunction and may void the warranty. · Failure to clean the condenser every three months can cause the unit to malfunction. This could void the warranty. · Allow unit temperature to stabilize for 24 hours before use. · If your model requires defrosting, never use an ice pick or other sharp instrument to help speed up defrosting. These instruments can puncture the inner lining or damage the cooling unit. · Use only genuine U-Line replacement parts. Imitation parts can damage the unit, affect its operation or performance and may void the warranty. WARNING Warning means that failure to follow this safety statement could result in serious personal injury or death. CAUTION Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property or equipment damage. General Precautions Use this appliance for its intended purpose only and follow these general precautions along with those listed throughout this guide: DANGER RISK OF CHILD ENTRAPMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so that children may not easily climb inside. 1115R, 1175R, 29R, 1175BEV 5 4 Product Features Origins Beverage Center Model 1175BEV The Model 1175BEV Beverage Center will accommodate up to 16 standard 750 mL bottles of your favorite wines on its two upper, 3/4 extendable, sliding wine racks. The Beverage Center also provides generous storage for nonwine beverages on two lower tempered shelves. Origins Refrigerator Models 1115R, 1175R, 29R · Models 1115R and 1175R feature an electronic control panel with digital display that allows you to display the interior temperature and adjust the setting to your preference. The electronic control and digital display provide an attractive appearance and its method of control permits precise temperature settings. Model 29R is equipped with a manual temperature control. · In Models 1115R and 1175R, an interior light illuminates automatically as the cabinet door is opened. Another mode of operation is available. A blackout/Sabbath mode (not Star K certified) allows you to darken both interior light and the LED display, while maintaining complete temperature control in the unit. · All three models qualify for the U.S. Government ENERGY STAR program. · All models feature maintenance-free automatic (cycle) defrost. · A generous capacity, one piece molded interior is very durable and easy to clean. · Model 1115R provides 3.3 cu ft (93 L) of refrigeration, Model 29R provides 3.5 cu ft (99 L) of refrigeration, and Model 1175R provides 5.7 cu ft (161 L) of refrigeration. · Adjustable tempered glass shelves are used. Model 29R has two full shelves and one half shelf; Models 1115R and 1175R have three shelves. These shelves are designed to be easily cleaned, contain spills, and may be positioned evenly throughout the interior to use all space efficiently. · Models 1115R and 1175R have two inner door "pickoff" shelves. Model 29R has fixed shelves. · All black and white models accommodate custom flat or raised door panels, and can achieve a custom, builtin look by matching surrounding cabinets. Please visit www.u-line.com for additional panel information. · Doors on black and white models are field-reversible. Stainless steel doors are not field-reversible. · Door locks for black and white 1175R and 29R models are only available factory-installed at time of original order. · Vinyl clad steel cabinets provide a rich textured look, and resist scratching, peeling, or flaking. Models 29R and 1175R are available in either black or white; Models 1115R is available in black only. · Models 1115R and 1175R are available in stainless steel, and feature a stainless steel door panel and hinges with black cabinet and grille. The Right Temperature for Wine Your Beverage Center has been designed to provide two temperature zones within the cabinet so the specific storage requirements of your beverages can be satisfied. The upper wine rack zone maintains an approximate temperature of 45°F, and the lower shelf zone maintains an approximate temperature of 38°F. NOTE: Product temperatures, not air temperatures, are referenced above. · An electronic control panel with digital display allows you to display the interior temperature in the lower shelf zone and adjust the temperature setting. The electronic control and digital display provide an attractive appearance, and its method of control provides temperatures settings for a variety of wine and non-wine beverages. · An interior light will illuminate automatically as the door is opened, providing easy visual identification of the contents. You can also select two other modes of operation: a. The interior light can be illuminated continuously while the door is closed for a four-hour period, without resetting the unit, providing a visible display of the Beverage Center contents. b. A blackout/Sabbath mode (not Star K certified) allows you to darken the interior lighting and the LED display for a predetermined 36-hour period, while maintaining complete temperature control in the unit. This mode will self-cancel at the end of the time period, with the lighting and LED display returning to normal operation automatically. · The upper chrome wine racks have a maple front trim that adds an attractive appearance to this model. The wood facing may be stained or replaced in its entirety with other woods or manufactured products (such as Corian® or Sandstone). · The wine racks slide out, and are 3/4 extendable, providing access to all wine bottles, including those located on the rear portion of the rack. · This model features maintenance-free automatic (cycle) defrost. · The Model 1175BEV is only available in stainless steel. The Model 1175BEV features a stainless steel door frame and hinges with black cabinet and grille. · The door features a full length handle and tinted thermal glass that protects your wines from potentially harmful light rays while providing a very stylish appearance. · The door is not field-reversible. Features and specifications are subject to change without notice. 6 1115R, 1175R, 29R, 1175BEV 5 Operation Interior Lighting Model 1115R, 1175R and 1175BEV The interior of the cabinet can be illuminated whenever the door is opened or remained darkened for a 36-hour period (blackout/Sabbath mode [not Star K certified]). 1 ULIN_0126_A 2 3 4 5 Figure 2 IMPORTANT Proper air flow (Figure 2) is required for your unit to operate at its highest efficiently. A grille, located in the base of the unit, must not be blocked at any time, or your unit will not perform as expected. ULIN_0074_A Figure 4 The LIGHT button (Figure 4, 1) on the control panel is used to change the lighting functions. To turn the lights and display OFF for a preset 36-hour interval (blackout/Sabbath mode [not Star K certified]): 1. Press and hold the LIGHT button (Figure 4, 1) for ten seconds and release (the °F symbol will flash briefly at the end of the ten second period). 2. The interior light and control display (Figure 4, 3) will go dark for the next 36 hours. NOTE: Although the display will not be visible, the temperature controls in the unit remain active, and the interior temperature will be maintained. 3. To exit the blackout/Sabbath mode (not Star K certified) before the 36-hour period, repeat Step 1. Initial Startup All U-Line units are shipped with controls that are preset. No initial adjustments are required. IMPORTANT U-Line recommends the unit be allowed to run overnight prior to loading with product. 1 ULIN_0127_A Figure 3 Model 1175BEV has another mode of lighting available. To illuminate the interior of the cabinet for a timed fourhour period: 1. Press and release the LIGHT button (Figure 4, 1) to switch from door-operated lighting control to the timed four hour lighting period (the °F symbol will flash briefly after the LIGHT button is pressed). 2. At the end of the four-hour period, the light will turn OFF and door-operated lighting control will resume. 3. To exit the timed lighting control before the end of the four-hour period, repeat Step 1. Models 1115R, 1175R and 1175BEV To turn the unit ON or OFF, press and hold the ON/OFF button (Figure 3, 1) for approximately ten seconds and release. The display will show the unit set-point temperature when turned ON and display OFF when the unit is OFF. Model 29R To turn unit off: Turn the controller knob located in the center of the grille counterclockwise until a "click" is heard. It may take some force to get the control to "click." To turn unit on: Turn the controller knob located in the center of the grille clockwise to a MID setting, number 3 or 4 on the controller knob. 1115R, 1175R, 29R, 1175BEV 7 Electronic Control Panel 1 2 3 4 5 Checking Product Temperature ULIN_0074_A Figure 5 Models 1115R, 1175R and 1175BEV The electronic control with digital display (Figure 5) is configured to show a single temperature continuously. This set-point temperature is a base number used by the controller to maintain the temperature zone in your unit. The factory default set-point is 38°F. This set-point temperature is used as a gauge if further temperature adjustments are required. Model 1175BEV has a DISPLAY OFF mode available through the control panel. This mode allows you to control whether the display (Figure 5, 3) will be ON or OFF whenever the door is closed. The button sequence that follows will switch between both modes: 1. Press and hold the WARMER button (Figure 5, 4), and simultaneously within five seconds press the ON/OFF button (Figure 5, 2) three times. 2. The display will be either visible or dark when the door is closed. 3. To return to the previous mode, repeat Step 1. ULIN_0093_A Figure 6 IMPORTANT U-Line recommends a set temperature of 38°F on all refrigerators. To check the actual product temperature in your unit, insert an accurate thermometer into a plastic (nonbreakable) bottle that is partially filled with water. Tighten the bottle cap securely (Figure 6). Place the bottle in the desired area for 24 hours. Refrain from opening the unit during the testing period. After 24 hours, check the temperature of the water. If required, adjust the temperature control in a small increment (See ADJUSTING TEMPERATURE). Factors which affect the internal temperatures of the cabinet include: · Temperature setting. · Ambient temperature where installed. · The number of times and length of time a door is opened and closed. · The amount of time the internal light is illuminated. (This affects primarily product on top rack or shelf.) · Installation in direct sunlight or near a heat source. Temperature Display Selection U-Line products supplied for 110 VAC operation have temperatures displayed in a default Fahrenheit (°F) configuration (Figure 5, 3). Models supplied for 220 VAC operation have temperatures displayed in a default Celsius (°C) configuration. The display can easily be adjusted for either type of temperature display. Press and hold the LIGHT button (Figure 5, 1) and simultaneously within five seconds press the COOLER button (Figure 5, 5) three times to change the display as desired. Temperature Display To display actual temperature: 1. Press the WARMER button (Figure 5, 4) for five seconds. The display (Figure 5, 3) will indicate the actual temperature. 2. After approximately 10 seconds, the set point temperature will return to the display. 8 1115R, 1175R, 29R, 1175BEV Adjusting Temperature IMPORTANT Adjust the set point temperature in single increments, and wait 24 hours for the temperature to stabilize before rechecking. Manual Temperature Control Model 29R 1 1 2 3 4 5 ULIN_0014_A Figure 8 ULIN_0074_A Figure 7 To adjust the set point temperature: 1. Press and release either the WARMER (Figure 7, 4) or COOLER (Figure 7, 5) button to put the controller in the SET TEMPERATURE mode. The °F (or °C) symbol will begin to flash. NOTE: If no further action is taken, this mode will self cancel in five seconds, and the original set-point temperature will be displayed. 2. Within five seconds (while the °F (or °C) symbol is flashing), press the WARMER or COOLER button as required to adjust the set point temperature. 3. The change will be set five seconds after adjusting the temperature, and the new set-point will be displayed (Figure 7, 3). Many factors can affect the internal temperatures of the cabinet. They include: · Temperature setting. · Ambient temperature where installed. · The number of times and length of time the door is opened and closed. · The amount of time the internal light is illuminated. (This affects primarily product on top rack or shelf.) · Installation in direct sunlight or near a heat source. Adjust the temperature by turning the numbered dial (Figure 8, 1) in small increments. Turn knob clockwise to make unit colder and counterclockwise to make unit warmer. After adjusting temperature, allow 24 hours for unit to stabilize. Many factors can affect the internal temperatures of the cabinet. They include: · Temperature setting. · Ambient temperature where installed. · The number of times and length of time the door is opened and closed. · The amount of time the internal light is illuminated. (This affects primarily product on top rack or shelf.) · Installation in direct sunlight or near a heat source. Normal Operating Sounds All models incorporate rigid foam insulated cabinets to provide high thermal efficiency and maximum sound reduction for its internal working components. In spite of this technology, your model may make sounds that are unfamiliar. Normal operating sounds may be more noticeable because of the unit's environment. Hard surfaces such as cabinets, wood/vinyl/tiled floors and paneled walls have a tendency to reflect normal appliance operating noises. Common refrigeration components, and a brief description of the normal operating sounds they make, are listed below. NOTE: Your product may not contain all of the components listed. · Compressor: The compressor makes a hum or pulsing sound that may be heard when it operates. · Evaporator: Refrigerant flowing through an evaporator may sound like boiling liquid. · Condenser Fan: Air moving through a condenser may be heard. · Automatic Defrost/Drain Pan: Water may be heard dripping or running into the drain pan when the unit is in the defrost cycle. 1115R, 1175R, 29R, 1175BEV 9 Wine Stocking Recommendations Model 1175BEV Specially designed wine racks allow for the proper horizontal storage of wine. The bottles are properly positioned so the wine remains in contact with the cork to assure that the cork does not become dry. The wine racks should be stocked staggering the bottles as shown (Figure 9). Storage, Vacation, Moving If the unit will not be used for an extended period, or otherwise stored, follow these steps completely: WARNING Electrical Shock Hazard. Disconnect power before servicing. Before operating, replace all panels. Failure to do so may result in death or electrical shock. 1. Remove all consumable contents from the unit. 2. Disconnect the power cord from its outlet, and leave it disconnected until the unit is returned to service. 3. Clean and dry the interior of the cabinet (See CLEANING AND MAINTENANCE: GENERAL CLEANING). 4. During periods of non-use, the cabinet must remain open to prevent the formation of mold and mildew. Open door a minimum of 2 in. (5 cm) to provide the necessary ventilation. ULIN_0019_A Figure 9 Outdoor, Marine and RV Usage Some U-Line models are designed to operate in outdoor, marine and RV environments. For best performance, keep the unit out of direct sunlight. · If the unit will be shut off for five days or more, prop door open to allow for air circulation and prevent mold and mildew. Product Disposal If the unit is being removed from service for disposal, check and obey all Federal, State and/or Local regulations regarding the disposal and recycling of refrigeration appliances, and follow these steps completely: 1. Remove all consumable contents from the unit. 2. Disconnect power to the unit and unplug the power cord from its outlet. IMPORTANT If the ambient temperature is expected to drop below 45°F, turn off and unplug unit, and drain all water from the unit to prevent freezing damage not covered by the warranty. · High ambient temperatures (110°F or higher) may reduce the unit's ability to reach low temperatures. DANGER RISK OF CHILD ENTRAPEMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so that children may not easily climb inside. 3. Remove the cabinet door. 10 1115R, 1175R, 29R, 1175BEV 6 Wine Guide Suggestions for Matching Food and Wine Although there are no hard fast rules for matching wine to food, observe some guidelines. Delicate dishes should be accompanied by lighter more delicate wines. Fullflavored foods should be matched with fuller-bodied wines. As a general rule, one should aim to ascend in flavor and quality of wines served. Table 1 Serve a: DRY wine WHITE wine YOUNG wine LIGHT-BODIED wine Before a: SWEET wine RED wine OLD wine FULL-BODIED wine Wine Recommendations To most, wine is a delicious mystery. We purchase it, uncork it, and savor its taste and beauty. But there is so much more to true wine appreciation. Many secrets are simply too good to keep bottled up. The U-Line Corporation is proud to present Spilling Wine Secrets online at www.U-Line.com/resources/wine_secrets. Take a moment to explore this section of our website to uncover wine myths, learn ideal storage conditions or ask our wine expert, Mr. Dave Barna, a specific question relating to wine. Mr. Barna will respond to your inquiry, and it may also be selected to appear on our Questions and Answers page. Wine Selections Suggestions Selecting the right wine for the right occasion can sometimes be a seemingly awkward or difficult task for the beginning wine enthusiast. We would therefore like to present you with a few suggestions which may provide a little more confidence and enjoyment when choosing and serving your wines. When selecting wines, keep an open mind and do not be afraid to be adventurous. Do not view the subject of wine so seriously it discourages you from learning and discovering for fear of embarrassment if something is incorrect. Wine is best viewed as a hobby and enjoyed. When assembling your collection, try not to become obsessed with "Vintages." Although a chart can be a useful tool, generalizations about a specific year have led more than one collector to disappointment. In many instances an "Off Year" will provide a better value and more drinking enjoyment. The primary guideline to the subject of wine is your own palate. Do not be afraid to make mistakes. Experiment, discover, but most of all, enjoy yourself and your new U-Line product. Any step back in quality will be noticed. If a fine wine is tasted prior to a lesser wine, many of the fine wine's subtle qualities may be missed. Common Food and Wine Matches Table 2 Foods Fish, Shell Fish, Crab, Oysters Wines Dry White Wines, Light Sparkling or Extra Dry Champagne Full-Bodied Red Wines Light-Bodied Red Wines Sweet White and Sparkling Wines Beef, Venison Pork, Veal, Lamb and Poultry Fruit 1115R, 1175R, 29R, 1175BEV 11 Guide to Common Styles of Wine Red Wines Full-Bodied Dry California French Italian California French French Italian Zinfandel, Cabernet Rhone, Chateauneuf-du-Pape Barbaresco, Barolo Pinot Noir Bordeaux, Burgundy Beaujolais Chianti, Bardolino Medium-Bodied Dry Light-Bodied Dry White Wines Full-Bodied Dry California French California French French Germany Frency Hungary California Germany Germany Chardonnay Montrachet, Meursault Puligny-Montrachet Sauvignon-Blanc Pouilly-Fuisse, Sancerre, Vouvray, Graves Chablis, Muscadet, Pouilly-Fume Beerenauslese Sauternes Tokay Gewurtztraminer Liebfraumilch Rhine, Mosel, Riesling Medium-Bodied Dry Light-Bodied Dry Full-Bodied, Very Sweet Medium-Bodied, Semi-Sweet Light-Bodied Off Dry Common Tasting Terms Terminology Acidity Balance Body Bouquet Complex Flabby Full-Bodied Lean Oaky Description A critical element of wine that is responsible for preserving the wines freshness. Excess acidity results in an overly tart and sour wine. A desired trait where tannin, fruit and acidity are in total harmony. Wines with good balance tend to age gracefully. The weight and presence of wine in the mouth provided by the alcohol and tannin level. Full-bodied wines tend to have this strong concentration. The blending of a wine's aroma within the bottle over a period of time, caused by volatile acidity. A subjective term often used in tasting. A wine is said to be complex if it offers a variety of flavors and scents that continue to evolve as it develops. A wine that lacks structure, or is heavy to the taste, lacks acidity. Wine high in alcohol and extract, generally speaking, fills the mouth, powerful. Generally describes wines that are slim, lacking of generosity or thin. A desirable flavor imparted to wine if done in moderation. Most wines are aged in oak barrels one to three years, thereby receiving this toasty oak characteristic. However, if a weak wine is left in contact too long with an oak barrel it will tend to be overpowered with an oaky taste. Tannins are extracted from the grape skins and stems and are necessary for a well-balanced red wine. Tannins are easily identified in wine tasting as the drying sensation over the gums. Tannins generally fade as a wine ages. Tannin 12 1115R, 1175R, 29R, 1175BEV 7 Cleaning and Maintenance General Cleaning Exterior Cleaning (As Required) Vinyl Clad (Black or White) Models: · Surfaces may be cleaned with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft, clean towel to prevent water spotting. · Clean any glass surfaces with a non-chlorine glass cleaner. Stainless Models: · Stainless door panels, handles and frames can discolor when exposed to chlorine gas, pool chemicals, salt water or cleaners with bleach. · Keep your stainless unit looking new by cleaning with a good quality all-in-one stainless steel cleaner/polish on a monthly basis. For best results use Claire® Stainless Steel Polish and Cleaner, which can be purchased from U-Line Corporation (P/N 173348). Comparable products are acceptable. Frequent cleaning will remove surface contamination that could lead to rust. Some installations may require cleaning on a weekly basis. · Do not clean with steel wool pads. · Do not use stainless steel cleaners/polishes on any glass surfaces. · Clean any glass surfaces with a non-chlorine glass cleaner. · Do not use cleaners that are not specifically intended for stainless steel on stainless surfaces (this includes glass, tile and counter cleaners). · If any surface discoloring or rusting appears, clean it quickly with Bon-Ami® or Barkeepers Friend Cleanser® and a non-abrasive cloth. Always clean in the direction of the grain. Always finish this process with Claire Stainless Steel Polish and Cleaner or comparable product to prevent further problems. · Using abrasive pads such as ScotchbriteTM will cause the graining in the stainless to become blurred. · Rust that is not cleaned up promptly can penetrate into the surface of the stainless steel and complete removal of the rust may not be possible. · Do not use any solvent-based or abrasive cleaners. These types of cleaners may transmit taste to the interior products and damage or discolor the interior. Maintenance Proper maintenance of your U-Line product will ensure efficiency, top performance and long life. The maintenance intervals listed are based on normal conditions. You may want to shorten the intervals if you have pets or other special considerations. Defrosting Automatic (Cycle) Defrost Models Automatic defrost models do not produce frost in normal operating conditions. However, a frost pattern may be noticed on the interior walls if the unit is repeatedly opened in a high heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting. WARNING DO NOT use any type of electrical heating device, ice pick, knife or other sharp instrument to defrost; this could damage the inner lining or refrigeration system and void the warranty. IMPORTANT The drain pan was not designed to capture the water created when manually defrosting. To prevent water from overflowing the drain pan, place towels or other absorbent materials over the interior drain trough, under the evaporator (Figure 10, 1), before defrosting. 1 Interior Cleaning (As Required) · Disconnect power to the unit. Clean the interior and all removed components using a mild non-abrasive detergent and warm water solution applied with a soft sponge or non-abrasive cloth. Rinse the interior using a soft sponge and clean water. Figure 10 ULIN_0196_A 1115R, 1175R, 29R, 1175BEV 13 To defrost: 1. Turn unit off. 2. Remove all products from the interior and prop the door in an open position (2 in. (5 cm) minimum). 3. Allow the frost to completely melt naturally. Clean the interior and all removed components using a mild nonabrasive detergent and warm water solution applied with a soft sponge or non-abrasive cloth. NOTE: DO NOT use any solvent-based or abrasive cleaners. They will discolor or damage the interior. 4. Dampen a soft sponge or non-abrasive cloth in clean water and wipe down the cabinet interior and removed components to remove any detergent residue. Rinse the sponge or cloth in clean water and repeat as necessary until the cabinet and components are clean. 5. When the interior is dry, turn unit on. 4. Remove grille and grille cap from unit. 1 ULIN_0153_A Figure 12 5. Clean the condenser coil (Figure 12, 1) using a using a soft brush with a "combing" action or vacuum cleaner. Do not touch the condenser coil. Condenser Cleaning Interval - Every Three Months To maintain operational efficiency, keep the front grille free of dust and lint, and clean the condenser every three months. Depending on environmental conditions, more or less frequent cleaning may be necessary. 2 1 Figure 13 6. Make sure grille cap is behind grille in slots provided in grille (Figure 13, 1) before attaching grille to unit, and secure but do not overtighten both grille screws (Figure 13, 2). 7. Reinstall the control knob (Figure 11, 1). 8. Reconnect power to the unit. ULIN_0198_A WARNING Disconnect electric power to the unit before cleaning the condenser. WARNING DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged. Model 1115R IMPORTANT DO NOT use any type of cleaner on the condenser unit. 1. Disconnect power to the unit. 1 Model 29R 1. Disconnect power to the unit. 2 3 2 ULIN_0155_A Figure 14 2. Loosen the two screws (Figure 14, 1) completely. 1 ULIN_0197_A NOTE: Screws are held in the grille by o-ring retainers, and will not come free of the grille. 3. Remove grille (Figure 14, 2) and grille cap (Figure 14, 3) from unit. Figure 11 2. Remove the control knob (Figure 11, 1) by pulling it straight out, away from grille. 3. Remove two screws from grille (Figure 11, 2) and save. 14 1115R, 1175R, 29R, 1175BEV 1 1 2 ULIN_0156_A Figure 15 4. Clean the condenser coil (Figure 15, 1) using a using a soft brush with a "combing" action or vacuum cleaner. Do not touch the condenser coil. 3 Figure 18 ULIN_0159_A 5. Place the hook-hinge (Figure 18, 1) located on the rear bottom side of the grille onto the front lip (Figure 18, 2) of the unit base. Swing the grille up into position, and align the screw holes on the grille to the grille screw hole on the cabinet. 6. Secure, but do not overtighten both grille screws (Figure 18, 3). 1 2 3 Figure 16 5. Make sure grille cap (Figure 16, 1) is behind grille in slots (Figure 16, 2) provided in grille before attaching grille to unit, and secure, but do not overtighten both grille screws (Figure 16, 3). 6. Reconnect power to the unit. ULIN_0157_A 7. Reconnect power to unit. Leveling It is important that units equipped with adjustable feet are level, for proper door and ice maker (if equipped) operation. NOTE: Models 29R DO NOT have leveling feet. These models MUST be placed on a level surface to operate properly. To level units with adjustable feet: Models 1175R and 1175BEV 1. Disconnect power to unit. 1 2 1 ULIN_0158_A ULIN_0041_A Figure 17 2. Loosen the two screws (Figure 17, 1) completely. NOTE: Screws are held in the grille by o-ring retainers, and will not come free of the grille. 3. Remove grille from unit. 4. Clean the condenser coil (Figure 17, 2) using a using a soft brush with a "combing" action or vacuum cleaner. Do not touch the condenser coil. Figure 19 1. Use a level to check the levelness of the unit from front to back and from side to side. Level should be placed along top edge and side edge as shown (Figure 19). 1115R, 1175R, 29R, 1175BEV 15 Door Reversal Black or white unit doors may be left- or right-hand opening. Depending upon the location of the unit, it may be desirable to change the side on which the door is mounted. Black Model 1115R 1 ULIN_0042_A To reverse the door, perform the following: 1. Remove the grille and grille cap (two screws). Figure 20 2. If the unit is not level, adjust the feet on the corners of the unit as necessary (Figure 20). 3. Check the levelness after each adjustment and repeat the previous steps until the unit is level. Door Alignment Check and Adjustment IMPORTANT Properly aligned, the door's gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door's gasket to assure that it is firmly in contact with the cabinet. Also make sure the door gasket is not pinched on the hinge side of the door. ULIN_0143_A Figure 22 2. Remove top hinge from cabinet (three screws) (Figure 22). Hold door to keep it from falling. 3. Lift the door off the bottom hinge. ULIN_0143_A Figure 21 NOTE: Model 29R shown (Figure 21) 1. Loosen (do not remove) top (Figure 21) and bottom hinge screws. 2. Align door squarely with cabinet. 3. Make sure gasket is firmly in contact with cabinet all the way around the door (no gaps). 4. Tighten bottom hinge screws. 5. Tighten top hinge screws. Figure 23 4. Remove bottom hinge from cabinet (two screws) (Figure 23). ULIN_0121_A 16 1115R, 1175R, 29R, 1175BEV 7. Relocate plastic spacer/bushing (Figure 26) on bottom of door to opposite side, and place door on bottom hinge pin. Clean out bushing hole in door bottom with a screwdriver if necessary. Hinge Plastic Plug Hole Plastic Plug Hole Screw Right Side Door Swing ULIN_0122_A Left Side Door Swing Right Side Hinge Invert Screw Invert Hinge ULIN_0142_A Figure 24 5. Remove screws on opposite side of cabinet (Figure 24). Note that there may be a nut behind one or both screws on either side. Figure 27 8. Remove plastic hole plug (Figure 27) from door handle and relocate on opposite side. 9. Remove pivot screw from top hinge, invert screw and reinstall pivot screw in top hinge. See Figure 30. ULIN_0144_A ULIN_0123_A Figure 25 6. Install hinge on opposite side, bottom of cabinet (Figure 25). Replace nut on back side where installed. Align hinge outer edge with cabinet before tightening screws. Figure 28 10. Remove three plastic screw plugs (Figure 28) from hinge holes, top of cabinet, opposite side. Be careful not to scratch cabinet. 11. Place door on lower hinge pin. Invert and install upper hinge on door. 1 ULIN_0109_A Figure 26 Figure 29 1115R, 1175R, 29R, 1175BEV ULIN_0145_A 17 12. Fasten upper hinge to unit (three screws) (Figure 29). Partially tighten screws. 13. Adjust door to assure proper seal. Tighten upper and lower hinge screws securely. 14. Replace three plastic plugs removed in Step 10 into holes on top of unit. Replace screws in holes in bottom of unit on opposite side. 15. Replace the grille and grille cap. Be sure to place grille cap on opposite side of unit from where it was originally. Right Side Door Swing Right Side Hinge Plastic Plug Hole Hinge Plastic Plug Hole Screw Left Side Door Swing Invert Screw Invert Hinge ULIN_0106_A Black or White Model 1175R To reverse the door, perform the following: 1. Remove the grille (two screws). Figure 32 5. Remove pivot screw from top hinge, invert screw and reinstall pivot screw in top hinge (Figure 32). Do not install hinge on cabinet at this time. ULIN_0104_A ULIN_0107_A Figure 30 2. Remove top hinge from cabinet (four screws) (Figure 30). Hold door to keep it from falling. 3. Lift the door off the bottom hinge. Figure 33 6. Remove bottom hinge from cabinet (four screws) and screws on opposite side of cabinet (Figure 33). 7. Remove pivot screw from bottom hinge, invert screw and reinstall pivot screw in hinge (Figure 32). ULIN_0160_A ULIN_0105_A Figure 31 4. Remove four plastic plugs (Figure 31) in hinge holes, top of cabinet, opposite side. Be careful not to scratch cabinet. Figure 34 8. Install bottom hinge on cabinet, opposite side, aligning flat edge of hinge with outer edge of unit (Figure 34). Partially tighten screws. 18 1115R, 1175R, 29R, 1175BEV 2. Remove two screws from grille (Figure 37, 2) and save. 3. Remove the grille and grille cap from unit. 1 ULIN_0109_A Figure 35 9. Relocate plastic spacer/bushing (Figure 35) on bottom of door to the opposite side. Clean out bushing hole in door bottom if necessary. ULIN_0143_A Figure 38 4. Remove top hinge from cabinet (three screws) (Figure 38). Hold door to keep it from falling. 5. Lift the door off the bottom hinge. ULIN_0110_A Figure 36 10. Place door on lower hinge pin. Align flat edge of top hinge with outer edge of unit and fasten upper hinge to unit (four screws) (Figure 36). Partially tighten screws until door is aligned. 11. Adjust door to assure proper seal. Tighten upper and lower hinge screws securely. 12. Replace four plastic plugs removed in Step 4 into holes on top of unit. Replace screws in holes in bottom of unit on opposite side. 13. Replace the grille. ULIN_0121_A Figure 39 6. Remove bottom hinge from cabinet (two screws) (Figure 39). Model 29R To reverse the door, perform the following: 2 1 ULIN_0197_A Figure 37 1. Remove the control knob (Figure 37, 1) by pulling it straight out, away from grille. 1115R, 1175R, 29R, 1175BEV 19 9. Relocate plastic spacer/bushing (Figure 42, 1) on bottom of door to opposite side, and place door on bottom hinge pin. Clean out bushing hole in door bottom with a screwdriver if needed. Hinge Plastic Plug Hole Plastic Plug Hole Screw Right Side Door Swing ULIN_0122_A Left Side Door Swing Right Side Hinge Invert Screw Invert Hinge ULIN_0142_A Figure 40 7. Remove screws on opposite side of cabinet (Figure 40). Note that there may be a nut behind one or both screws on either side. Figure 43 10. Remove plastic hole plug from door handle and relocate on opposite side (Figure 43). 11. Remove pivot screw from top hinge, invert screw and reinstall pivot screw in top hinge (Figure 43). ULIN_0144_A ULIN_0123_A Figure 41 8. Install hinge on opposite side, bottom of cabinet (Figure 41). Replace nut on back side where installed. Align hinge outer edge with cabinet before tightening screws. Figure 44 12. Remove three plastic screw plugs (Figure 44) in hinge holes, top of cabinet, opposite side. Be careful not to scratch cabinet. 13. Place door on lower hinge pin. Invert and install upper hinge on door. 1 ULIN_0109_A Figure 42 20 1115R, 1175R, 29R, 1175BEV Door Shelf Removal/Insertion 1 2 ULIN_0143_A Figure 45 ULIN_0040_A 14. Fasten upper hinge to unit (three screws) (Figure 45). Partially tighten screws until door is aligned. 15. Adjust door to assure proper seal. Tighten upper hinge screws securely. 16. Replace three plastic plugs removed in Step 11 into holes on top of unit. Replace screws in holes in bottom of unit, opposite side. 17. Re-inspect door seal and alignment. Adjust if needed. Figure 47 NOTE: 1115R and 1175R models only To remove the door shelf: 1. Grasp shelf in center, and lift until the shelf notches (Figure 47, 1) clear the bosses (Figure 47, 2). 2. Carefully pull the shelf away from the door. To install the door shelf: 1. Holding the shelf in the center, center the shelf in the door at the desired location, slightly above the bosses (Figure 47, 2). 2. Lower the shelf onto the bosses (Figure 47, 2). 2 1 Figure 46 18. Make sure grille cap is behind grille in slots provided in grille (Figure 46, 1) before attaching grille to unit, and secure but do not overtighten both grille screws (Figure 46, 2). ULIN_0198_A 1115R, 1175R, 29R, 1175BEV 21 Glass Shelf Removal/Installation 2. Tilt up right-hand edge of shelf (Figure 49, 2). 3. Remove shelf from unit by pulling out (Figure 49, 3). Insert the shelves as follows: 1. To move to a different position in the unit, insert shelf at an angle, approximately 15-20°, over the rib in the side of the unit where you want to place the shelf. The shelf must be started into the unit at an angle to clear the door. 2. Continue to slide the shelf into the unit at an angle until it clears the door. 3. Lower the shelf and push it in completely. 1 Light Bulb Replacement 1115R, 1175R and 1175BEV ULIN_0199_A To replace the light bulb in your U-Line unit: Figure 48 For Models 29R and 1175BEV (Model 29R illustrated above), reposition the shelves as follows: 1. Open door completely. 2. Grasp the shelf edge in the center (Figure 48, 1), and slide the shelf from the unit. 3. Reposition the shelf as required, ensuring the raised white edge strip is toward the rear of the unit and the decorative graphics, if applied, are on the underside of the shelves. Figure 50 1. Grasp the edges of the light housing lens (Figure 50, 1) opposite the exposed tab, and gently push the lens towards the tab (Figure 50, 2). 2. Pull the edge of the lens down (Figure 50, 1), and swing it out of the light housing. ULIN_0001_A 1 2 IMPORTANT · Make sure the shelves are inserted fully into the unit. · The white edge strip toward the rear prevents cans and bottles from freezing against the cold evaporator. For all other models, reposition the shelves as follows: IMPORTANT ALWAYS use a genuine U-Line replacement bulb (P/N 31317) in the light housing. Use of any other bulb within the housing will generate excessive heat, causing damage to the light housing and cabinet interior, and compromising the precise temperature control of your unit. 3. Replace the bulb only with a genuine U-Line P/N 31317 replacement. 4. Replace the lens by first inserting the tab side back into the housing at a slight angle. While gently pushing the lens towards the tab end, push the free end up into the housing, and release when you will hear a snap/click. 3 1 2 ULIN_0066_A Figure 49 1. Pull shelf out about 6" (Figure 49, 1), until back of shelf clears the "hump" on the right-hand side. 22 1115R, 1175R, 29R, 1175BEV Wine Rack Removal/Installation 1175BEV To remove a rack from the cabinet: 1. Grasp the end of the rack, and gently slide it out until it stops. 2. Remove any bottles stored on the rack. Wood Trim Finishing Interior components of your U-Line unit are equipped with a natural wood trim for appearance and durability. Although this wood trim has been coated with a clear sealer at the factory, it is recommended that the trim be stained (if desired), and receive a final finish coating prior to the unit going into full-time service. WARNING To prevent permanent damage to the inner liner of your unit, the wood trim MUST be removed from the unit for staining and/or finishing. Allow stain/finish to dry thoroughly (at least 24 hours per coat) in accordance with the product manufacturer's instructions prior to reinstallation. Failure to do so may cause the inner liner of the unit to have a permanent odor, which is not covered by the warranty. ULIN_0162_A Figure 51 3. Press the left rack release lever (Figure 51) down, and at the same time, lift the corresponding right rack release lever up, and pull the rack out until it is free of the tracks and the cabinet. If staining the trim is desired, it must be done before the application of any type of final finish. Review the following staining/final finish and final finish-only guidelines when staining/ and or sealing the wood to ensure proper adhesion and durability of the finish. NOTE: Glass in door is tinted. Stain may look darker when door is closed. Staining and final finish application: 1. Remove all screws securing wood trim to interior components, and remove the trim from the cabinet interior. NOTE: Your model may contain an electronic display panel in the lowest level trim piece. After removing the trim screws, and gently pulling the trim from its location, a wiring harness connector will become visible. Unplug the connector, and remove the trim from the interior. IMPORTANT Do not remove the track side rails from the cabinet. To insert a rack in the cabinet: 1. Align the left and right rack channels with the tracks in the cabinet, and ensuring an even track engagement on both sides, gently push the rack into the cabinet until it stops. 2. Before reloading the rack, ensure proper operation of the travel stops in the left and right track rails by pulling the rack out gently until it completely stops. IMPORTANT DO NOT use oil-based stains on wood trim. Vapors from oil-based stains will permanently penetrate the liner and will not dissipate over time. 2. Apply Minwax® Water-Based Wood Stain to wood with a synthetic bristle brush or a foam applicator. Allow stain to penetrate approximately three minutes. Before the stain is dry, take a stain dampened rag and remove any excess stain remaining. Wipe in the direction of the grain with medium pressure to achieve the desired stain color. 3. After two hours, repeat step 2. This will even out the color of the wood. 4. Allow stain to dry for a minimum of three hours before applying the final finish. 5. If desired, sand the wood with very fine sandpaper to smooth the surface after the staining process. 1115R, 1175R, 29R, 1175BEV 23 6. Remove all dust from the wood, and apply one coat of Minwax® Polycrylic® Protective Finish using a synthetic bristle brush to the wood. This finish should be applied in a thin coat following the direction of the grain. Apply the finish to the back and sides of the wood first, and allow it to dry for two hours. Apply the finish to the front side of the wood next, and allow it to dry for two hours. Sand with very fine 220 grit sandpaper. Apply two addition coats of the finish in the same manner, but do not sand the trim after the final third coat is applied. 7. Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior components. Final finish-only application: 1. Remove all screws securing wood trim to interior components, and remove the trim. 2. Lightly scruff sand the wood trim with 280 or finer grit sandpaper. 3. Remove sanding dust with a clean, dry cloth. 4. The factory-applied seal is compatible with virtually all finishes. A low odor, water clean up, quick-drying finish such as Minwax® Polycrylic® Protective Finish is recommended (Minwax® Polycrylic® is an ultra fastdrying water-based finish). Apply a thin coat of a clear, protective finish, following the container label directions. 5. Lightly sand and reapply if desired. 6. Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior components. 8 Service Before Calling for Service If your U-Line product appears to be malfunctioning, read through the OPERATION section of this guide to ensure that the function of all controls are clearly understood. If the malfunction persists, the TROUBLESHOOTING GUIDE in this guide will assist you in quickly identifying common problems, and provide information on possible causes and remedies. Most often, this will resolve the problem without the need to call for service. If Service is Required If you do not understand a troubleshooting remedy, or your product needs service, contact U-Line Corporation directly. Contact information appears on the rear cover of this guide. You will be asked for your product Model and Serial Numbers. This information should be recorded inside the front cover of this guide, following the products original purchase. It also appears on the Model and Serial number plate located on the upper right or rear wall of the interior of your product. Replacement Parts When you need replacement parts, always request that genuine U-Line replacements be used. U-Line products have been designed and engineered using components that work efficiently, and provide superior service life and performance. The use of aftermarket parts or components may affect the safety, operation, performance or durability of your product, and may also void its warranty. 24 1115R, 1175R, 29R, 1175BEV Troubleshooting Guide DANGER ELECTROCUTION HAZARD Never attempt to repair or perform maintenance on the unit until the main electrical power has been disconnected. Troubleshooting - What to check when problems occur: PROBLEM Unit does not operate and electronic display is blank. No interior light Light won't go out when door is closed (Model 1175BEV). Unit not cold enough POSSIBLE CAUSE No electrical supply Loose or burned out bulb Light on/off switch is turned to ON. Light staying on Door gasket not sealing properly Item(s) interfering with door Dirty condenser coils Airflow to front grille blocked High ambient temperature or exposure to direct sunlight Temperature not set cold enough The unit frosts up. Door gasket not sealing properly. Door left open High ambient temperatures or humidity Noise during operation Certain sounds are normal. Fan blade touching obstruction (wiring, foam insulation, etc.) Unit too cold Freezing product Temperature control set too cold Product touching evaporator in back of unit REMEDY Plug unit in or check circuit breaker. Tighten or replace bulb (See MAINTENANCE; LIGHT BULB REPLACEMENT). Turn switch to OFF (See OPERATION). Adjust door (See MAINTENANCE; DOOR ALIGNMENT CHECK AND ADJUSTMENT). Adjust door (See MAINTENANCE; DOOR ALIGNMENT CHECK AND ADJUSTMENT). Reposition or remove item(s). Clean condenser (See MAINTENANCE; CONDENSER CLEANING). Airflow must not be obstructed to front grille (See OPERATION). Reposition unit. Set control to a cooler setting (See OPERATION). Allow 24 hours for temperature to stabilize. Adjust door (See MAINTENANCE; DOOR ALIGNMENT CHECK AND ADJUSTMENT). Defrost unit manually (See MAINTENANCE; DEFROSTING). Soft sounds from the fan and water/dropping sounds from the ice maker will be heard. Remove obstruction. Set control to warmer setting (See OPERATION). Move product away from evaporator, making sure it is not touching evaporator. NOTE: Recommended temperature setting is 38°. 1115R, 1175R, 29R, 1175BEV 25 Troubleshooting - Models with an electronic display: PROBLEM Electronic display is blank and interior light is off with door open. Electronic display is blank and interior light is on with door open. Electronic display shows repeating, randomly flashing symbols and partial characters. POSSIBLE CAUSE Unit is in blackout/Sabbath mode (not Star K certified). A display function has changed. REMEDY Exit blackout/Sabbath mode (not Star K certified) (See OPERATION). Touch and hold the WARMER button and touch and release the ON/OFF button three times, then release the temperature button. The display should become visible. Touch and hold the warmer temperature button and touch and release the LIGHT button three times, then release the temperature button to exit the factory control mode. The set-point temperature should now be displayed. Repeatedly touch the WARMER button to advance any number shown to 99 and touch and release the LIGHT button. The set-point temperature should now be displayed. Record the error code(s) displayed and call for service. A factory control mode has been inadvertently entered. Electronic display shows: 0, 1 to 16, or 99. A factory control mode has been inadvertently entered. Electronic display shows one or more of the following: E1, E2, E4, E5, E6. The unit is displaying an error code. 26 1115R, 1175R, 29R, 1175BEV Electronic Control Quick Guide Task Touch Touch Display Comment Turn ON/OFF ON/ OFF Hold 10 seconds Release when °F flashes. or Adjust Temperature WARMER or COOLER WARMER or COOLER Touch and release Touch to change temperature °F flashes after first touch, set-point saved after 5 seconds of inactivity and °F stops flashing. View Actual Temp WARMER Hold 5 seconds Release when °F flashes. WC models will scroll top/mid/bottom temps. Change F/C Hold COOLER COOLER COOLER or Blackout Mode Hold 10 seconds Display (and cabinet light) will not operate in Blackout Mode. Blackout will end in 36 hours, or hold again to terminate early. Glass Door Models Only Light normally goes on/ off with door opening. Pressing light button will turn interior light on for 4 hours, then it will turn off. ON/ OFF ON/ OFF ON/ OFF Cabinet Light Display Off Mode WARMER Display off when door is closed (unless cabinet light is turned on). Repeat to switch back. NOTE: 38°F is an example; the display will vary with actual set-point. IMPORTANT Factory recommended set-point is 38°F for refrigerators and beverage centers, and 50°F for wine coolers. 1115R, 1175R, 29R, 1175BEV 27 This page intentionally left blank 28 1115R, 1175R, 29R, 1175BEV This page intentionally left blank 1115R, 1175R, 29R, 1175BEV 29 This page intentionally left blank 30 1115R, 1175R, 29R, 1175BEV U-Line Corporation Limited Warranty U-Line Corporation warrants each U-Line product to be free from defects in materials and workmanship for a period of one year from the date of purchase; and warrants the sealed system (consisting of the compressor, the condenser, the evaporator, the hot gas bypass valve, the dryer and the connecting tubing) in each U-Line product to be free from defects in materials and workmanship for a period of five years from the date of purchase. During the initial one-year warranty period for all U-Line products U-Line shall: (1) at U-Lines option, repair any product or replace any part of a product that breaches this warranty; and (2) for all Marine, RV and Domestic U-Line products sold and serviced in the United States (including Alaska and Hawaii) and Canada, U-Line shall cover the labor costs incurred in connection with the replacement of any defective part. During years two through five of the warranty period for the sealed system, ULine shall: (1) repair or replace any part of the sealed system that breaches this warranty; and (2) for all Marine, RV and Domestic U-Line products sold and serviced in the United States (including Alaska and Hawaii) and Canada, U-Line shall cover the labor costs incurred in connection with the replacement of any defective part of the sealed system. All other charges, including transportation charges for replacements under this warranty and labor costs not specifically covered by this warranty, shall be borne by you. This warranty is extended only to the original purchaser of the U-Line product. The Registration Card included with the product should be promptly completed by you and mailed back to U-Line or you can register on-line at www.U-LineService.com. The following are excluded from this limited warranty: installation charges; damages caused by disasters or acts of God, such as fire, floods, wind and lightening; damages incurred or resulting from shipping, improper installation, unauthorized modification, or misuse/abuse of the product; customer education calls; food loss/spoilage; door and water level adjustments (except during the first 90 days from the date of purchase); defrosting the product; adjusting the controls; door reversal; or cleaning the condenser. If a product defect is discovered during the applicable warranty period, you must promptly notify either the dealer from whom you purchased the product or U-Line at P.O. Box 245040, Milwaukee, Wisconsin 53224 or at 414-354-0300. In no event shall such notification be received later than 30 days after the expiration of the applicable warranty period. U-Line may require that defective parts be returned, at your expense, to U-Lines factory in Milwaukee, Wisconsin, for inspection. Any action by you for breach of warranty must be commenced within one year after the expiration of the applicable warranty period. This limited warranty is in lieu of any other warranty, express or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose; provided however, that to the extent required by law, implied warranties are included but do not extend beyond the duration of the express warranty first set forth above. U-Lines sole liability and your exclusive remedy under this warranty is set forth in the initial paragraph above. U-Line shall have no liability whatsoever for any incidental, consequential or special damages arising from the sale, use or installation of the product or from any other cause whatsoever, whether based on warranty (express or implied) or otherwise based on contract, tort or any other theory of liability. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 1115R, 1175R, 29R, 1175BEV 31 For General Inquiries: P.O. Box 245040 Milwaukee, Wisconsin 53224-9540 U.S.A. Phone (800) 779-2547 FAX (414) 354-5696 www.U-Line.com For Service and Parts Assistance: Phone (800) 779-2547 (414) 354-0300 FAX (414) 354-5696 Email: OnLineService@U-Line.com www.U-LineService.com E-mail: OnlineParts@u-line.com