Use and Care Guide Ice Maker Models: BI95, BI98, SP18 BI95 BI98 SP18 1 Introduction Congratulations on your purchase of a U-Line refrigeration product. A pioneer in the field for more than 40 years, U-Line Corporation is the world's number one manufacturer of built-in, under-counter, specialty refrigeration and ice making products. U-Line dedicates 100% of its research and development to these products. The result: U-Line technology consistently leads the market with innovation, design, depth of product line and performance. U-Line products are making life more convenient in homes, businesses, and hotels around the world. U-Line supports its products with a strong dealer network, and its commitment to quality even extends to environmentally safe packaging. IMPORTANT READ all of the instructions in this guide completely before operating the unit for the first time. For future reference, keep this guide in a safe, accessible location. If you need additional information or assistance, please contact U-Line Corporation directly. Contact information appears on the rear cover of this guide. If you have a problem with the operation of this product, the SERVICE section of this guide will assist you in quickly identifying common problems and provide information on possible causes and remedies. If your product needs service, contact U-Line directly. Warranty Registration Your U-Line Corporation Limited Warranty is located on the inside rear cover of this guide. To validate your warranty, the product and its original purchase date must be registered. A Warranty Registration Card has been included for this purpose in the package containing this manual. Complete and mail the Warranty Registration Card, or register your product online at www.U-LineService.com as soon as possible after purchase. If your product registration is not on file and a request for warranty coverage is received, the date of sale to the U-Line Selling Dealer or Distributor will be established as the first date of warranty coverage for your product. Please Record Your Model Information When you request additional information or service, you will be asked for your products model and serial numbers. You can find this information on the serial plate located on the upper right or rear wall in the interior of your unit. This information also appears on the warranty registration card. 1 2 ULIN_0023_A Figure 1 Please record the model number (Figure 1, 1), serial number (Figure 1, 2), date of purchase, and dealer contact information for your U-Line product below: Model Number: _____________________________________________________ Serial Number: _____________________________________________________ Purchase Date: _____________________________________________________ Dealer Name: _____________________________________________________ Dealer Address: _____________________________________________________ Dealer Telephone: _____________________________________________________ 2 BI95, BI98, SP18 2 Table of Contents Introduction ...............................................................................................................................2 Warranty Registration .......................................................................................................2 Please Record Your Model Information ...........................................................................2 Table of Contents .......................................................................................................................3 Safety Precautions ......................................................................................................................5 Safety Alert Definitions .....................................................................................................5 General Precautions ...........................................................................................................5 Product Features ........................................................................................................................6 Origins Ice Maker Models BI95, BI98, SP18 .......................................................................6 Operation ...................................................................................................................................6 Initial Startup .....................................................................................................................6 Ice Harvest Control .............................................................................................................7 Ice Maker ............................................................................................................................7 Normal Operating Sounds .................................................................................................8 Outdoor, Marine and RV Usage ........................................................................................8 Storage, Vacation, Moving ................................................................................................8 Product Disposal .................................................................................................................9 Cleaning and Maintenance .......................................................................................................9 General Cleaning ...............................................................................................................9 Maintenance ....................................................................................................................10 Service .......................................................................................................................................14 Before Calling for Service ................................................................................................14 If Service is Required ........................................................................................................14 Replacement Parts ...........................................................................................................14 Troubleshooting Guide ....................................................................................................15 U-Line Corporation Limited Warranty ....................................................................................19 BI95, BI98, SP18 3 This page intentionally left blank 4 BI95, BI98, SP18 3 Safety Precautions IMPORTANT PLEASE READ all instructions completely before attempting to install, operate, or service your unit. · Proper installation procedures must be followed if this unit is being initially installed, or is moved to a new location after being in service. An INSTALLATION GUIDE for your unit, providing complete installation information is available from U-Line Corporation directly, and must be consulted before any installation is begun. U-Line contact information appears on the rear cover of this guide. · This unit requires connection to a grounded (three-prong), polarized receptacle that has been placed by a qualified electrician in accordance with applicable electrical codes. WARNING SHOCK HAZARD - Electrical Grounding Required. · Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected. · Never remove the round grounding prong from the plug and never use a two-prong grounding adapter. · Altering, cutting of power cord, removal of power cord, removal of power plug, or direct wiring can cause serious injury, fire and/or loss of property and/or life, and will void the warranty. · Never use an extension cord to connect power to the unit. · Always keep your working area dry. CAUTION · Use care when moving and handling the unit. Use gloves to prevent personal injury from sharp edges. · If your model requires defrosting, DO NOT use any type of heater to defrost. Using a heater to speed up defrosting can cause personal injury and damage to the inner lining. Safety Alert Definitions Safety items throughout this guide are labeled with a Danger, Warning or Caution based on the risk type: DANGER Danger means that failure to follow this safety statement will result in severe personal injury or death. IMPORTANT · Do not lift unit by door handle. · Never install or operate the unit behind closed doors. Be sure front grille is free of obstruction. Obstructing free air flow can cause the unit to malfunction and may void the warranty. · Failure to clean the condenser every three months can cause the unit to malfunction. This could void the warranty. · Allow unit temperature to stabilize for 24 hours before use. · If your model requires defrosting, never use an ice pick or other sharp instrument to help speed up defrosting. These instruments can puncture the inner lining or damage the cooling unit. · Use only genuine U-Line replacement parts. Imitation parts can damage the unit, affect its operation or performance and may void the warranty. WARNING Warning means that failure to follow this safety statement could result in serious personal injury or death. CAUTION Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property or equipment damage. General Precautions Use this appliance for its intended purpose only and follow these general precautions along with those listed throughout this guide: DANGER RISK OF CHILD ENTRAPMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so that children may not easily climb inside. BI95, BI98, SP18 5 4 Product Features 5 Operation 1 2 Origins Ice Maker Models BI95, BI98, SP18 All Origins Ice Makers provide high daily ice production and storage capabilities, and conserve on water, using only 2-3/4 gallons (10.4 L) to produce approximately 22 lbs (10 kg) of ice. · Model 95 produces up to 23 lbs (10.4 kg) of ice per day and will store 12 lbs (5.4 kg). · Model 98 produces up to 25 lbs (11.3 kg) of ice per day and will store 25 lbs (11.3 kg). · Model SP18 produces up to 20 lbs (9 kg) of ice per day and stores 12 lbs (5.4 kg). ULIN_0027_A Figure 2 Additional Origins Features · All models feature a clear, removable ice bucket. · Occasional manual defrosting will be required. · Models 95 and 98 doors feature an integrated handle, and will accommodate a custom flat or raised panel to match surrounding cabinets. · The Model SP18 door features stainless steel hinges and fasteners to prevent corrosion, is field-reversible, and includes a travel pin to keep the door securely closed. · All models feature black or white vinyl clad steel cabinets that provide a rich textured look, and resist scratching, peeling, and flaking. Features and specifications are subject to change without notice. IMPORTANT Proper air flow (Figure 2 - Model 95 and 98 shown) is required for your unit to operate at its highest efficiently. A grille, located in the base of the unit, must not be blocked at any time, or your unit will not perform as expected. Initial Startup All U-Line units are shipped with controls that are preset. No initial adjustments are required. IMPORTANT It is possible that dirt or scale will dislodge in the water line. Always throw away all ice cubes made during the first two to three hours of operation. Model 95 and 98 The power switch is located behind the front grille. A small opening in the top of the grille (Figure 2, 2) is provided to access the switch. OFF Figure 3 Depress the ON/OFF switch (Figure 3) as required to turn the unit on or off. 6 BI95, BI98, SP18 ON ULIN_0129_A Model SP18 To turn the unit on or off, press the rocker switch (Figure 3) located in the center of the lower grille. Ice Maker When the ice bucket is full, the ice making mechanism will shut off. However, the refrigeration system will continue to cool and maintain the cube supply. Ice Harvest Control Adjustments are not normally needed. The control is preset at the factory. IMPORTANT Do not place cans or bottles in the ice compartment because they will freeze. IMPORTANT Making adjustments may affect the daily ice production of the unit. 1 2 ULIN_0087_A Figure 6 ULIN_0027_A Figure 4 Ice production may be interrupted by raising the bin arm into an upright and locked position (Figure 6). The unit will maintain temperature for ice storage. Models 95 and 98 To adjust the Ice Harvest Control: 1. Remove the front grille (one screw) (Figure 4, 1). IMPORTANT If you are not intending to use the ice maker and turn the supply valve off, it is imperative to raise the bin arm of the ice maker (Figure 6). Failure to raise the bin arm may result in damage to the water valve. Certain sounds are normal during the unit's operation. You may hear the compressor or fan motor, the water valve, or ice dropping into the ice bucket. OL 2. Turn the adjusting screw (Figure 5) using a flat tip screwd ...