PowerLook 3000 Color Scanner Operation Manual Thank you for purchasing the PowerLook 3000 color scanner. With the PowerLook 3000 color scanner, you can easily scan A4 size documents and photographs into your computer and maintain them as electronic copies. Main Features: · · High Resolution and Density Range: With a resolution of up to 12192 dpi, it produces better gamma transformation, and more accurate detection of highlight and shadow details, thereby allowing even distribution of colors. Power Twin Lens: PowerLook 3000 offers a dual-lens feature that enables users to choose between two optical resolutions: 1220x3048 dpi and 3048x3048 dpi. It is like having two scanners in one machine. The extended optical resolution is extremely helpful when scanning small images, such as 35mm slides. Auto Focus: When switching the lens or changing the scan mode (Reflective/Transmissive), the scanner will move the lens and the CCD for focusing the image automatically. Intelligent Scanning Control Interface called MagicScan: MagicScan provides a comprehensive range of scanning control functions. Completing the package are the bundled award-winning and proven software packages such as binuscan PhotoPerfect. Built-in Transparency Adapter: Allows the scanning of films, slides, and transparencies up to the full-size scanning area: 8.5" x 11.7". Proprietary Image Noise Reduction: Your scanner uses a sealed optical system design that blocks dust particles and excess reflections from penetrating the optical unit, thereby overcoming image and optical noise and ensuring sharp, true-life images. · · · · System Requirements: 486DX or higher (68030 processor or Power Macintosh for Mac users), CD-ROM drive, hard drive with 20MB free disk space, 4MB memory, Microsoft Windows 3.1/NT or 95 (Mac OS 7.0 or later for Mac users), Windows-compatible keyboard, display, and mouse. Recommended: SVGA or higher graphics card. 1 Contents Quick Start Guide.............................................................................................3 Chapter 1: Getting Started.................................................................................6 Before You Begin..........................................................................................6 Unpacking Your Scanner.....................................................................................6 Static Electricity Precautions...............................................................................6 A Glance at Your Scanner................................................................................6 Preparing the Scanner.....................................................................................7 Testing the Scanner.............................................................................................7 Changing the SCSI ID Number..............................................................................8 Care and Maintenance Tips..............................................................................8 Chapter 2: Macintosh Installation........................................................................9 Connecting Scanner to Your Computer................................................................9 Installing the Software....................................................................................9 Scanning with Scan Frames/Negative Film Holder...................................................9 Notice for Scanning Images............................................................................11 Chapter 3: PC Installation.................................................................................12 Interface Card Installation..............................................................................12 Connecting the Scanner to the Computer.............................................................13 Installing the Software...................................................................................13 Scanning with Scan Frames/Negative Film Holder.................................................14 Notice for Scanning Images............................................................................15 Chapter 4: Troubleshooting Tips........................................................................16 General Approach........................................................................................16 LED Indicators...........................................................................................17 System Hang..............................................................................................17 Appendix A: Installing An ASPI-Compatible Card..................................................19 Checking the SCSI Addresses..............................................................................19 Resetting the Address of the Scanner....................................................................19 Checking the Terminators...................................................................................20 Connecting the Computer and Scanner.................................................................20 Installing the Software for PC Users.....................................................................21 Appendix B: Scanner Specifications.....................................................................22 Glossary.......................................................................................................23 2 Quick Start Guide This section serves as a quick reference to the connection and installation procedures for the PowerLook 3000 scanner. 1. Unpacking your Scanner Unpack your scanner. Make sure that all the scanner system hardware, software, cabling, and documentation items indicated on the packing list re present. 2. Connecting the Interface Card (for PC users only) a) Turn off your computer and remove the computer's housing cover. b) Locate the available 16-bit slot. c) Insert the SCSI card by pressing it gently but firmly into the slot. Make sure it is firmly seated in the slot. d) Replace the computer's housing cover. Note: If you already have a SCSI card installed on your computer: When installing the software, you will be asked to choose TYPICAL or CUSTOM installation. Choose CUSTOM and select "Adaptec or other ASPI Compatible Interface Card" when installing the scanner driver. Otherwise, the scanner will not work properly. 3. Connecting the SCSI Cable Connect the SCSI cable to the SCSI interface card and the other end of the SCSI cable to the scanner. If your scanner is not chained to other SCSI devices or at the end of the SCSI chain, please connect the terminator to the remaining SCSI port of your scanner. 4. Connecting the Power Connect the power cord to the scanner and plug the other end of the power cord into an available outlet (socket). 3 5. Powering Up a) Turn the scanner power switch on. When the Ready indicator is on, your scanner is ready to use. b) Turn on your computer. Power Switch 6. Software Installation We recommend that you install your image editing software first and then MagicScan. a) Insert UMAX MagicScan CD into your CD-ROM drive. b) Win95/Win98 users ­ click on the Start button and click on Run... Win3.1/NT users ­ you can access Run... by clicking on the File menu in Program Manager and then click on Run. In the Run dialog box, type d:\setup. If your CD-ROM drive is designated by another drive, please type the appropriate letter in the Run dialog box. Macintosh users ­ Double-click on the MagicScan installer icon to start installation. c) d) Follow the on-screen instructions to completely install MagicScan. Note: After you finish installing the software, refer to the MagicScan Electronic Book for information on using MagicScan. Note: If you want to scan transparencies, please use frame holders to obtain better scanning results. Please note, you don't need to use frame holders for scanning 35mm slides. 4 About this manual This manual is divided into chapters and appendices. The chapters give instructions on all aspects of installation, troubleshooting, and basic scanner maintenance. The appendices contain relevant technical information for you reference. Chapter 1 gives instructions and tips on scanner preparation, handling, and other routine scanner maintenance. gives instructions on scanner connection to a Macintosh computer and the corresponding software installation. gives instructions on scanner connection to an IBM PC compatible and the corresponding software installation. gives troubleshooting tips for possible problems with the scanner. Chapter 2 Chapter 3 Chapter 4 Appendix A gives instructions for installing an ASPI-compatible interface card. Appendix B lists specifications for PowerLook 3000 A Glossary and an Index are also included for easy reference. 5 Chapter 1: Getting Started Your PowerLook 3000 scanner is extremely user-friendly. Hardware and software installation can be completed in a few steps. In minutes you can start operating your scanner and obtain impressive results. This chapter tells you how to prepare your scanner for connection and installation. It also gives some handling precautions and general care measures to ensure that your scanner will stay in tip condition at all times. Before You Begin Unpacking Your Scanner Ensure that your package contains all the hardware, software, cabling, and documentation you ordered. Check for any damage that may have occurred while the package was in transit. If there are any missing or damaged items in your scanner package, contact your dealer or the carrier of your package immediately. Static Electricity Precautions Static electricity (in your body) can cause damage to the electronic components on the scanner's printed circuit board or the computer's interface card. Therefore, you need to discharge static build-up from your body before handling any card or component outside of its anti-static packaging. To protect your equipment from static discharge, you are advised to closely follow these measures below: · Discharge any static build-up in your body by touching a grounded or anti-static surface (such as a large metal object or the silver-toned expansion slot covers at the rear of your computer). Do this prior to removing any electronic components from their anti-static bags. When handling any electronic components, avoid touching any metal part of the component such as the gold "fingers" that plug into the expansion slot. It is best to handle system components either by their edge or by their mounting brackets. · A Glance At Your Scanner Take a few minutes to become familiar with the different parts of the scanner. The figure below shows the locations and names of the scanner parts. A brief description of each part is also given. · Object Glass ­ The glass surface on which the document or image for scanning is placed; made of tempered glass with excellent optical qualities. LED Indicators ­ two indicators ­ Power and Ready. Document Cover ­ protect the original from dust. Power Switch ­ Switches power on and off. SCSI ID Switch ­ Sets the scanner's SCSI ID. 25/50-Pin SCSI Connector ­ Insert the 25/50-Pin SCSI cables here. · · · · · 6 · · Power Cord Connector ­ Insert the scanner power cord here. Terminator Switch ­ Selects the proper terminator setting to ensure the scanner works properly. Front View Rear View Preparing the Scanner Prepare your scanner for installation through the following simple steps: · · Check and reset (if necessary) the scanner's SCSI address. Run the automatic scanner self-test. Testing the Scanner The scanner automatically performs a simple self-test each time it is turned on. This self-test checks the status of certain scanner devices. After unpacking, start the scanner self-test by following the steps below: 1. 2. 3. Connect the power cord to a wall outlet. Connect the other end of the power cord to the scanner. Turn on the power to the scanner. At power-on, the front panel indicators flash once. The power indicator then glows and the ready indicator light blinks. When the test is completed, the power and ready indicators glow steadily. 7 Changing the SCSI ID Number Your scanner's SCSI ID setting is factory preset at #6. · · Check to see if this ID setting is used by another device connected to your computer's SCSI port. If SCSI ID #6 is not used, you do not need to change your scanner's SCSI ID number. You can directly proceed to hardware connection and software installation. For installation instructions, proceed to Chapter 2 if you are connecting to a Macintosh computer or to Chapter 3 if you are connecting to an IBM PC. If you find, however, that another connected device is already using SCSI ID #6, then you must reset the SCSI ID on your scanner. · To reset the SCSI ID, do the following: 1. 2. 3. Make sure the scanner power and the computer are off. Check the SCSI addresses of your external SCS ...