Table of Contents Introduction ..................................................................................................... 3 FCC Statement .......................................................................................... 4 IC Statement ............................................................................................. 5 Mounting the BC-RH96 ................................................................................. 7 Using the Mounting Bracket ..................................................................... 7 Using Hook and Loop Material ................................................................ 9 BC-RH96 Connections.................................................................................. 10 Connecting Cables ........................................................................................ 11 Remote Head and Scanner Power ........................................................... 11 Control Cable .......................................................................................... 11 Data Port Cable -- Firmware Updates ................................................... 1 Control Configuration Guides ..................................................................... 13 The BR330T Key Configuration............................................................. 14 The BCD396T Key Configuration .......................................................... 14 The BCT15 Key Configuration............................................................... 15 The BCD996T Key Configuration .......................................................... 15 Operation ....................................................................................................... 16 Setting the BC-RH96 Backlight ............................................................. 17 Configuration -- Menu Mode................................................................. 18 Setting the BC-RH96 LCD Contrast ...................................................... 18 Setting Mobile Options ................................................................................. 19 Mobile Default Key Assigment .............................................................. 19 Setting Handy Options ................................................................................. 21 Default Handy Option Key Assigment ................................................... 1 Setting the Function Mode ........................................................................... 22 Setting Hold Timer.................................................................................. Setting Auto Release ............................................................................... 3 Miscellaneous................................................................................................. 23 Volume Settings - For Handy Scanner .................................................... 3 Control Limitations ................................................................................. 4 Serial Operation Precautions .................................................................. 4 Initialize Memory (Reset) ....................................................................... 5 Using the Cable Clamp ........................................................................... 5 Specifications ................................................................................................. 26 One Year Limited Warranty ........................................................................ 26 © 007 Uniden America Corporation, Fort Worth, TX 76155 All Rights Reserved Introduction Your Bearcat BC-RH96 Remote Head helps you get more out of your Uniden BCD396T, BR330T, BCT15, or BCD996T scanner. The BC-RH96 provides the following features: It controls all the functions of your Uniden mobile or handy scanner (with the exception of the scanner's power control.) It gives you three shortcut keys that you can assign to your scanner's most often used operations. It serves as a large LCD with your handy scanner. 3 It recognizes the scanner baud rate for reliable communications between units. Its Volume and Squelch controls emulate those on the scanner. It provides a large, easy to read LCD display with adjustable backligh and contrast levels. It emulates your mobile scanner's Close Call and Alert LED signals. Please read the entire manual to familiarize yourself with installation and operation for maximum enjoyment. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 4 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and . this device must accept any interference received, including interference that may cause undesired operation. IC Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 5 Included with your BC-RH96 Your Bearcat Remote Head is supplied with essential components and accessories to get you operational. Supplied are: The BC-RH96 Remote Head unit. A steel mounting bracket with attachment washers factory installed. Mounting hardware (screws and washers) to attach the bracket. Threaded knobs to allow mounting the Remote Head quickly to the bracket. 6 Remote connection cable, 10 feet in length. A correctly polarized vehicle DC adapter to let you connect the Remote Head to a convenience outlet in your vehicle that provides 1-13.8 VDC. This Owner's Manual. A set of pocket-sized Quick Reference Configuration cards for convenient setup and usage. A Self Adhesive Cable Clamp If any of the above items are missing or damaged, immediately contact your place of purchase or Uniden Customer Service at (800) 97-103. Mounting the BC-RH96 The following two mounting methods are suggestions used by most. Depending upon your individual situation, you may decide on a different approach. or in front of your dash, armrest console, or other location. If you drill carelessly, expensive damage can result. If in doubt, consult your vehicle dealer's service department or a qualified professional installer. Important: AVOID AIRBAG DEPLOYMENT ZONES. Ignoring this installation concern may result in bodily harm and the inability of the airbag to perform properly. Be sure to select a mounting location so that when you route power and remote cables they do not interfere with any existing cables or other controls. Check local laws to determine if using a scanner is legal in your area. 7 Using the Mounting Bracket For most vehicles, the supplied bracket will be the easiest method of mounting. With the bracket removed from the Remote Head, use the holes in the bracket as a template to initially mark the location you plan to use in your vehicle. Be absolutely certain of what might be behind the mounting surface before making any holes, be it above, or below, - 1. Using the supplied screws or other suitable hardware, secure the bracket. Under Dash Bracket . Insert the BC-RH96 and insert the bracket knobs to lock the Remote Head in position. 3. Attach the provided Cigarette Lighter Power Cord to the rear power jack marked DC IN 13.8V. Then plug the adapter end into a dash mounted 1V DC socket. 4. Insert the 3-Conductor Mini-Plug of the supplied ten-foot cable in the REMOTE jack on the back of the scanner. Star Washers & Screws Bracket Knobs BC-RH96 8 5. Route the Remote Cable through the Slotted Guide (3) so it lies flat. Route the Power Cord so it does not interfere with any other wires. Using Hook and Loop Material The rear of the unit, when all connectors and cables are properly routed, is flat. This permits using hook and loop material (not supplied) that has a heavy-duty peel and stick adhesive on one side. This material is generally available from electronic supply stores and hardware stores. Do not apply the tape to the rear until all cables are installed and routed correctly. Do not cover the slotted guide with the tape. 9 Follow the directions supplied with the hook and loop material. Locate a suitable spot on the dash, console, or other area. If you use the Remote Head in another place such as a radio room, using tape lets you quickly mount or remove the Head as desired. Note: The two slots on the front of the Remote Head cannot be used for mounting. These slots are cosmetic features only. BC-RH96 Connections Note: Connect the Remote Cable and route it through the cable channel as shown. Then connect the DC Power Cable and route it through the channel. Always route both cables through the channel. 1 2 DC Power Input Jack 1 DC IN 13.8V REMOTE 2 3 To Remote Cable Mini-Plug Cable Routing Guides Data Port (for firmware updates) 3 4 4 10 Connecting Cables There are three cables that you can connect to the BCRH96. The DC power cable The Remote Control cable The Data Port cable (not supplied with BC-RH96) diameter and wire it with the center positive using at least 18 gauge wire to an extra fuse block terminal of your vehicle. The Remote Head cannot turn power to the scanner off or on. Therefore, consider connecting the power lead of the scanner to a terminal on your vehicle that is turned off when you turn off the ignition key. Remote Head and Scanner Power To provide power to the Remote Head, insert the barrel of the cigarette lighter adapter into the jack in the back of the unit marked DC IN 13.8V. Insert the other end in a convenient socket on the dash of your vehicle. To connect a power lead permanently, obtain a barrel connector 5.5 mm diameter, with a center pin mm 11 Control Cable The ten-foot supplied Control Cable has a stereo miniplug on one end and a scanner serial connector on the other. Insert the mini-plug into the REMOTE jack on the rear of the Remote Head. Route the cable through the guides to keep the cable correctly positioned. Then, route the remainder of the cable toward the location of your target scanner. When doing so, be sure to avoid sharp metal edges of your vehicle's body, or other possible hazards. Be sure the cable does not interfere with controls, operation of the vehicle, or passenger safety. Insert the cable's special connector in the front port of the BCT15/BCD996T mobile scanner, or the side port of the BR330T/BCD396T handy scanner. nect the data transfer cable to this port on the bottom of the Remote Head. Connect the other end to the DB9 serial port on your PC. This is the only purpose of this connection. Important: For best operation, be sure your scanner always has the latest firmware. Visit www.uniden.com to verify that your scanner has the most up-to-date firmware. Data Port Cable -- Firmware Updates The Remote Head has a data port (see BC-RH96 Connections)so you can update the firmware using the data transfer cable provided with your scanner. Con1 Control Configuration Guides The BC-RH96 lets you remotely operate the following scanners: BCT15 Mobile Scanner BCD996T Mobile Scanner BR330T Handy Scanner BCD396T Handy Scanner Even though the scanners have different controls and functions, when you connect the BC-RH96 to the scanner, the Remote Head automatically changes the functionality of its controls to match the operation of the target scanner. 13 Important: If you have more than one scanner, be sure to turn off power to the BC-RH96 before switching target scanners. To assist you to better understand each of these changes, a set of pocket-sized Quick Reference Cards are provided. The diagrams on the next pages replicate the card diagrams. FUNC BR330T F1 F2 F3 MENU FUNC BCD396T F1 F2 F3 pri wx pri wx rcl race att F3= LIGHT F1= MENU rcl rev F2= LIGHT F1= L/O rev car F2= L/O att F3= The BR330T Key Configuration 14 The BCD396T Key Configuration STATE F1 F2 F3 MENU BCT15 BCD996T F1 F2 SRCH1 SRCH2 SRCH3 SRCH4 SRCH5 SRCH6 PRI WX SRCH1 ...