Step 1 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. · Base unit · Handset · AC adapter · Rechargeable battery · Telephone cord · Beltclip · This owner's manual · Other printed material Uniden Parts Department at (800) 554-3988 Hours: M-F 8:00 a.m. to 5:00 p.m. CST. or visit our website at www.uniden.com for replacement parts. D Plug the AC adapter cord into the base unit and then into a 120V AC outlet. Use only the Uniden AC adapter supplied with your new phone! TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS A B C Press and hold the call id/menu key. Press the vol/ / or vol/ / to move the pointer to an option. key E Place the handset in the base and charge continuously for 15 - 20 hours before using the phone. D A B C D E Press the select key to change the option setting. Press the end key to exit, and return the handset to the base. QUICK REFERENCE GUIDE OPTIONS INCLUDE Auto Talk On/Off Step 3 Connect to Phone Line When the handset battery pack is fully charged, after 15-20 hours of charging, plug the telephone cord into the base unit and then into a telephone wall jack. Your phone is set for tone dialing. If your local network requires pulse dialing, please see "Choosing the dialing mode" on page 17. Step 2 Install and Charge the Handset Battery TO INSTALL THE HANDSET BATTERY (see page 10 for details) Charge the handset battery pack for at least 1520 hours before using your new cordless telephone for the first time! CIDCW On/Off (Caller ID on call waiting) Area Code Dial Language Enter/Remove Pulse/Tone English/French/Spanish A Remove the cover. Step 5 Set Answering System Connect the battery pack connector with the correct polarity. Step 4 Setting Menu Options Note: There are five setup options available. They are Caller ID options [Auto Talk, CIDCW (Caller ID on Call Waiting), Area Code], Dial Mode and Language (See page 16 for details). B C The answering system is on by default. A pre-recorded greeting will play and your system is ready to accept calls. To record a personal outgoing greeting to callers, please see page 47. delete charge repeat in use skip play/stop find hs memo rec greeting answer on/off set/ringer mic menu/clock volume /select Replace the cover. redial/ select delete/ memory pause channel www.uniden.com QUICK REFERENCE GUIDE [3] 1° Paso Inspección del contenido del embalaje Asegúrese de que haya recibido los siguientes artículos en el paquete. Si alguno de estos artículos falta o está dañado, comuníquese con el departamento de partes de Uniden. · Base · Receptor · Adaptador CA · Pila recargable · Cable telefónico · Pinza para la correa · Este manual para el usuario Uniden Parts Department Teléfono: (800)554-3988 Horas: de Lunes a Viernes desde las 8 a.m. hasta las 5:00 p.m., hora central O visítenos en nuestra página Web en www.uniden.com para conseguir las partes de reemplazo. D Conecte el cable del adaptador CA en la base y luego en una toma CA de 120 V. ¡Use solamente el adaptador CA de Uniden suministrado con su nuevo teléfono! PARA PROGRAMAR LAS OPCIONES DE IDENTIFICACIÓN DE LLAMADAS, LENGUAJE Y MARCACIÓN A B C Mantenga oprimido el botón caller id/ menu en el modo de espera. Oprima el botón vol/ / o vol/ / para mover el cursor a la opción deseada. Oprima el botón select para cambiar la opción. Oprima el botón end para salir, y devuelva el receptor a la base. E Antes de usar el teléfono, coloque el receptor en la base y cárguelo continuamente por 15 ­ 20 horas. D 3° Paso Conexión a la línea telefónica Cuando el paquete de pilas del receptor esté totalmente cargado, después de una carga de 1520 horas, conecte el cable telefónico en la base y luego en el enchufe telefónico de la pared. Su teléfono está programado para marcación por tono. Si su red local requiere la marcación por pulso, por favor consulte "Selección del modo de marcación" en la página 17. LAS OPCIONES INCLUYEN A B C D E Auto Talk Encendido/apagado 2° Paso Instalación y carga de la pila para el receptor PARA INSTALAR LA PILA DEL RECEPTOR (Consulte la página 10 para más detalles) Quite la tapa. ¡Use solamente el paquete de pilas recargables de Uniden suministrado con su nuevo teléfono! Conecte el enchufe del paquete de las pilas con la polaridad correcta. CIDCW Encendido/apagado (Identificación de llamadas de llamadas en espera) Código del área Insertar/quitar Marcación Pulso/tono Lenguaje Inglés/ Francés/ Español A B 4° Paso Programación de las opciones para la exhibición en la pantalla Nota: Hay 5 opciones de programación disponibles. Estas son opciones de la identificación de llamadas (AutoTalk, CIDCW [Identificación de llamadas de llamadas en espera], Código del área), Modo de marcación y del lenguaje. (Consulte la página 16 para más detalles). 5° Paso Programación del contestador automático El contestador automático está activado por omisión. Un mensaje de salutación programado se escuchará y su contestador estará listo para aceptar llamadas. Para grabar un mensaje de salutación, por favor consulte la página 47. delete charge repeat in use skip play/stop C Reponga la tapa. redial/ select delete/ memory pause channel find hs memo rec greeting answer on/off set/ringer mic menu/clock volume /select [4] QUICK REFERENCE GUIDE www.uniden.com Contents Quick Reference Guide Welcome/Features Controls and Functions Getting Started Setting up the Phone Mounting the Base Unit on a Wall Setting Menu Display Options 3 6 7 9 14 16 19 20 21 21 21 22 22 22 23 25 26 27 28 30 31 [5] Storing and Editing the RocketDial Making Calls with the RocketDial Deleting the RocketDial 31 31 32 33 33 34 35 37 39 39 40 41 49 56 56 56 57 57 58 61 62 64 65 Caller ID Features Caller ID and CIDCW (Caller ID on Call Waiting) When the Telephone Rings Viewing the Caller ID Message List Deleting Information from the Caller ID List Using the Caller ID List Basics Making and Receiving Calls Adjusting the Handset Ringer and Earpiece Volume Redial Tone Dialing Switch Over Traveling Out-of-Range Selecting a Different Channel Find Handset Flash and Call Waiting The Integrated Telephone Answering Device The Integrated Telephone Answering Device Features Turning the Answering System On/Off Setting Up Your Answering System Using Your Answering System Additional Information Changing the Digital Security Code Installing the Beltclip Headset Installation Note on Power Sources Maintenance Troubleshooting General Information Precautions & Warranty I.C. Notice Index Memory Dialing Storing Phone Numbers and Names in Memory Dial Steps for Entering Names and Special Characters Making Calls with Memory Dialing Chain Dialing Editing a Stored Name and/or Phone Number Erasing a Stored Name and Phone Number RocketDial RocketDial www.uniden.com Welcome Congratulations on your purchase of the Uniden cordless phone. This cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless telephone may vary. As an ENERGY STAR® Partner, Uniden has determined that this product or product models meets the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. Features · 900 MHz Extended Range Technology · Caller ID and Caller ID on Caller Waiting · 3 Line Backlit Display · Integrated Telephone Answering Device (ITAD) · Trilingual Voice Prompts (English, French or Spanish) · 10 Number Memory Dialing · RocketDial · Last Number Redial · Flash and Pause · Tone/Pulse Dialing · Find Handset Locator · Earpiece Volume Control · Ringer Volume Control (High-Low-Off) · Hearing Aid Compatible · 20 Channel Autoscan · English, French or Spanish Display Option Be sure to visit our web site: www.uniden.com Uniden ® and RocketDial ® are registered trademarks of Uniden America Corporation. AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of Uniden America Corporation. [6] www.uniden.com Controls and Functions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Handset antenna Optional headset jack Beltclip hole Handset battery compartment Handset earpiece LCD display vol/ / (volume & scroll) key (p.20) vol/ / (volume & scroll) key (p.20) caller id/menu key (p.16/33) /tone/ (left cursor) key (p.21) redial/pause key (p.19) select key (p.16) talk/flash key (p.19) end key (p.19) RocketDial key (p.31) #/ (right cursor) key (p.23) memory key (p.23) delete/channel key (p.22/30) Handset microphone and ringer speaker 20. Handset charging contacts 1 2 3 5 6 7 8 9 13 14 15 4 10 11 12 redial/ select delete/ memory pause channel 16 17 18 19 20 www.uniden.com CONTROLS AND FUNCTIONS [7] 21. 22. 23. 24. 25. 26. 27. 28 21 22 23 24 25 26 27 delete charge repeat in use skip play/stop 29 30 31 32 33 34 35 36 find hs memo rec greeting answer on/off set/ringer mic menu/clock volume /select 28. 29. 30. 31. 32. 33. 34. 35. 36. delete/ key (p.52) repeat/ key (p.50) memo rec key (p.53) find hs key (p.22) greeting key (p.45) menu/clock key (p.41) volume/select/ (down) key (p.49) play/stop/ key (p.41) skip/ key (p.51) charge/in use LED (p.11) answer on/off key (p.40) set/ringer key (p.42/48) volume/select (up) key (p.49) Base charging contacts DC IN 9V jack Telephone line jack [8] CONTROLS AND FUNCTIONS www.uniden.com Setting up the Phone Do the following steps: A. Choose the best location B. Install the rechargeable battery pack into the handset C. Connect the base unit A. Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS. Here are some important guidelines you should consider: Avoid heat sources, such as radiators, air ducts, and sunlight Avoid television sets and other electronic equipment Avoid noise sources such as a window by a street with heavy traffic Avoid microwave ovens Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Avoid personal computers Avoid other cordless telephones If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer. Choose a central location · The location should be close to both a phone jack and a continuous power outlet which is not switchable. · Keep the base and handset away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting. · The base can be placed on a desk, tabletop, or mounted on a standard wall plate. www.uniden.com G E T T I N G S TA R T E D [9] B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed on the base unit. For optimum performance use only the Uniden BT-905 rechargeable battery pack supplied with your phone. Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged. 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one-way.) Match the wire colors to the polarity label in the battery compartment, connect the battery, and listen for a click to insure connection. 3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place. [ 10 ] G E T T I N G S TA R T E D www.uniden.com G E T T I N G S TA R T E D 4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place. 5) Place the handset on the base unit face forward for 15-20 hours without interruption. The base unit's LED light (labeled as charge/in use) illuminates once the handset is placed on the base. The LED light will illuminate regardless if the battery pack is connected or not. If the base charge/in use LED light does not illuminate: · Check to see if the AC adapter is plugged into the base unit and the electrical wall outlet properly. (Use only the supplied AC adapter. Do not use any other AC adapter.) · Check to see if the handset is sitting correctly on the base and making good co ...