UIP1868P OWNER'S MANUAL Contents WELCOME/FEATURES TERMINOLOGY CONTROLS & FUNCTIONS GETTING STARTED Setting up the Phone Expanding Your Phone Registering Expansion Handsets Installing the Beltclip Headset Installation Display and Icons Soft Key Function Main Menu Options Setting Menu Options 7 14 15 17 17 18 19 20 21 2 CALLER ID Caller ID and CIDCW 4 MULTI-HANDSET FEATURES 5 Multi-Handset Features 7 Using DirectLink Mode Using the Room/Baby Monitor Using the Intercom 48 48 52 52 52 54 55 TROUBLESHOOTING Troubleshooting 58 58 ADDITIONAL INFORMATION Note on Power Sources General Information Liquid Damage 65 65 67 68 BASICS Using Your Phone Call Waiting Placing a Call on Hold Redialing a Call Adjusting the Ringer, and Earpiece and Speaker Volume Muting the Ringer Muting the Microphone Traveling Out of Range Privacy Mode Conferencing Find Handset Using One Touch Voice Mail Access 30 PRECAUTIONS & WARRANTY 30 I.C. NOTICE 32 32 INDEX 33 34 35 36 36 37 37 38 39 69 70 71 PHONEBOOK 40 Setting up the Phonebook 40 Viewing the Phonebook 44 Making Calls Using the Phonebook 45 Speed Dialing 45 Editing or Erasing a Stored Name, Phone Number, Distinctive Ring and Speed Dial 46 Copying Phonebook Entries 47 [1] www.uniden.com Welcome With the UIP1868P voice-over-Internet Protocol (VoIP) telephone, Packet8 VoIP service and your broadband connection, you can access the Internet and make phone calls simultaneously. The UIP1868P connects directly to your broadband modem. It separates voice signals from data signals and sends voice traffic to its cordless handsets and data traffic to your computer. If you a have a local switch or router supporting a LAN, the UIP1868P will pass all Ethernet traffic through to your LAN. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. Features · · · · · · · · · · · · · · · · 5.8GHz Digital Expandable Corded/Cordless Telephone System Dual Keypad and LCD Screen at Base Ten Multi-Handset Expandability Hands-Free Duplex Speakerphone in the Handset and Base Caller ID/Call Waiting Deluxe (Subscribe through Service provider) 100 Programmable Memory Locations in the Base and Each Cordless Handset Intercom/Call Transfer Between Handsets or Handset and Base 20 Distinctive Ring Options (Ten Ringer Tones and Ten Melody Ringers) Mute and Hold Features Do Not Disturb (DND) Feature DirectLinkTM Mode Room/Baby Monitoring Battery Level Indicator Clock Display Animation Displays WELCOME/FEATURES www.uniden.com WELCOME/FEATURES [2] This series features AutoTalkTM and AutoStandbyTM. AutoTalk allows you to answer a call by just removing the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To protect you against mis-billed calls that might result from your phone being activated by other equipment, this series has Random CodeTM digital security, which automatically selects one of more than 10,000,000 digital security codes for the handset and base. Digital Spread Spectrum Technology uses a wider frequency band than standard digital transmissions. The result is a more secure conversation with the clarity of digital sound, extended range, and minimal interference from other cordless phones. IntegriSoundTM Built in sound quality which provides life-like conversations. With DirectLinkTM mode, you can use two or more handsets as radio tranceivers (walkie-talkies). Be sure to visit our web site: www.uniden.com Uniden® is a registered trademark of Uniden America Corporation. AutoTalk, AutoStandby, DirectLink, IntegriSound and Random Code are trademarks of Uniden America. Accessibility If you have a disability and need customer service assistance or if you have any questions about how Uniden's products can accommodate persons with disabilities, please call the accessibility voice/TTY line:1-800-874-9314 A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a message, and we will call you back. Information is also available on our website, www.uniden.com, under the "Accessibility" link. [3] WELCOME/FEATURES www.uniden.com WELCOME/FEATURES Terminology ·Standby Mode - The handset maybe sitting or off the cradle, but is NOT in use. talk/flash or speaker has not been pressed. The corded base handset is on the base and speaker on the base has not been pressed. No dial tone is present. ·Talk Mode The handset is off the cradle and talk/flash or speaker has been pressed, or pick up the corded base handset and speaker on the base is pressed and enabling a dial tone. ·VoIP Voice over Internet Protocol, a method of sending voice signals over broadband Internet connections. ·Station The main base or any registered handset. TERMINOLOGY www.uniden.com TERMINOLOGY [4] Controls & Functions 1 5 6 2 7 3 8 9 4 10 11 12 17 18 19 20 14 15 16 13 1. Handset Antenna 2. Beltclip Hole 3. Speakerphone Speaker and Ringer 4. Handset Battery Compartment 5. New Message LED 6. Handset Earpiece 7. LCD Display 8. soft Keys (P. 19) 9. /vol / (volume up/down) (P. 34 & 21) 10. */tone/< (P. 51 & 41) 11.speaker (P. 30) 12.intcom/hold (P. 55 & 32) 13.Headset Jack Cover 14.talk/flash (P. 30 & 32) 15.end (P. 32) 16.cid (P. 49) 17.#/> (P. 51 & 41) 18.phonebook (P. 40) 19.Handset Microphone 20.Handset Charging Contacts CONTROLS & FUNCTIONS [5] CONTROLS & FUNCTIONS www.uniden.com 21 22 23 24 25 32 33 34 26 35 36 37 38 41 42 43 44 45 27 28 29 30 31 40 39 21. phonebook (P. 40) 22. In use LED 23. New Message LED 24. call id (P. 49) 25. Corded Base Handset 26. Base Speaker 27. Curl Cord 28. intercom/hold (P. 55 & 32) 29. find handset (P. 38) 30. do not disturb /DND LED (P. 35) 31. /tone/< (P. 51 & 41) 32. LCD Display 33. /vol / (volume up/down) (P. 34 & 21) 34. soft Keys (P. 19) 35. speaker/speaker LED (P. 31) 36. flash (P. 32) 37. mute (P. 36) 38. exit (P. 21) 39. mic (microphone) 40. #/> (P. 51 & 41) 41. VoIP1 port 42. WAN port 43. LAN port 44. Reset Switch 45. Power port CONTROLS & FUNCTIONS www.uniden.com CONTROLS & FUNCTIONS [6] G E T T I N G S TA RT E D Setting up the Phone Safety Recommendations To ensure general safety, follow these guidelines: · Do not open or disassemble this product. · Do not expose the product to moisture. · Do not perform any action that creates a potential hazard to people or makes the equipment unsafe. · Ultimate disposal of this product should be handled according to all national laws and regulations. · Do not touch the wires on the cable ports or the wires of cables connected to a port as hazardous voltage may be present on these wires when the equipment is powered on. · The plug-socket combination must be accessible at all times because it serves as the power disconnect. · To avoid electric shock, do not connect the UIP1868P to any RJ-11 telephone wall jacks. Use caution when connecting cables. This could damage the UIP1868P or the telephone wiring in the building. · Do not work on the system or connect or disconnect cables if lightning or thunder are present in your area. · Do not cover or block the air vents on the top or bottom surface of the UIP1868P. Overheating can cause permanent damage to the unit. · Read the instructions completely before connecting the system to its power source. [7] GETTING STARTED www.uniden.com GETTING STARTED 911 Service Notice Packet8 services do not include traditional 911 emergency dialing. Packet8 offers Enhanced 911 service (an FCC standard developed for emergency calling from wireless phones) at an additional monthly fee. A subscription to Packet8's Enhanced 911 service is required for emergency calling. Packet8's Enhanced 911 optional service is not available in all areas. note If you ordered your UIP1868P directly from Packet8, it will already be activated for you. Your 10-digit activation code was in the confirmation email you received when your UIP1868P shipped. (If you don't have this email, go to www.packet8.net and enter the email address and password used to create the account in the account sign in page.) Before You Start! Visit the Packet8 activation website http://activate.packet8.net/ and enter the MAC address ID found on the bottom of your UIP1868P. After you activate the UIP1868P, you will receive an email containing a 10-digit activation code. You will need this activation code in Step 3. STEP 1: Check Your Equipment Check your broadband setup and the other equipment you will need: · A broadband modem and a broadband Internet connection · A computer with an Ethernet port (or a local Ethernet switch or router) · One CAT-5 Ethernet cable · The Packet8 10-digit activation code that was emailed to you when you created your account. (If you don't have this email, go to www.packet8.net and enter the email address and password used to create the account in the account sign in at the top of the screen.) · If you want to use a backup phone along with the UIP1868P, you will need a standard telephone cable (RJ-11). www.uniden.com GETTING STARTED [8] G E T T I N G S TA RT E D Check Your Broadband Configuration The UIP1868P supports the two most common broadband connection protocols: DHCP and PPPoE. If your broadband connection uses DHCP, you do not need to change any settings on the UIP1868P. If your broadband connection uses PPPoE, you will need to enter your user name and password in the UIP1868P. If your broadband provider has given you a static IP address, you will need to enter that information in the UIP1868P. For more information on configuring your UIP1868P visit http://www.uniden.com/voip. STEP 2: Connect Your UIP1868P Once your account is set up, you can connect your UIP1868P. 1) Use the coil cord to connect the corded handset to the base. 2) Use the included Ethernet cable to connect your broadband modem to the RJ-45 port labeled WAN. [9] GETTING STARTED www.uniden.com GETTING STARTED 3) Use another Ethernet cable to connect your PC to the RJ-45 port labeled LAN. If you use a switch or router for a local network, connect it to the LAN port instead. note ·You can also connect a wireless access point to the LAN port, if desired. ·VoIP1 is not a separate line. Any phone connected to VoIP1 will share VoIP line 1 with all the UIP1868P's cordless handsets. 4) OPTIONAL: If you have a second phone you want to use for line 1, connect it to VoIP1. CAUTION Do not connect the UIP1868P to a regular telephone wall jack. www.uniden.com GETTING STARTED [10] G E T T I N G S TA RT E D 5) Use the included AC abapter to connect the POWER port to a 120 Vac continuous power outlet. CAUTION To avoid risk of fire or electrical hazard, use ONLY the included AC adapter! All the LEDs will flash several times, and the PWR LED will remain on. If the UIP1868P was properly recognized by Packet8's network, the CA LED will remain on. Test your connection by making a call with the corded handset and browsing to a web page from your PC. If you have any difficulty, see the Troubleshooting section. Step 3 Activate your Packet8 Service Once you have connected your UIP1868P, you can activate your Packet8 service · You will need your 10-digit activation code that was sent to you by email when your Packet8 order shipped. (You can also obtain your activation code at www.packet8.net by signing in at your account page.) · Pick up your telephone handset and dial the Activation Service number 012-0001. · Follow the voice instructions and enter your 10-digit activation code. · When you enter a valid code, your account will be activated and your Packet8 phone number will be emailed to you. This Packet8 phone number can also be found in your account details page after signing in at www.packet8.net. [11] GETTING STARTED www.uniden.com GETTING STARTED Install the rechargeable battery pack into the handset 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way.) Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection. 3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place. 4) Place the battery case cover back on the handset and slide it upwards until it clicks into place. note ·Use only the Uniden (BT-446) rechargeable battery pack supplied with your cordless telephone. ·Replacement battery packs are also available through the Uniden Parts Department. www.uniden.com GETTING STARTED [12] G E T T I N G S TA RT E D Connect the charger note For maximum range: ·Keep the antenna free of obstruction. ·When the h ...