User manual UNIVERSAL REMOTE CONTROL AVEX

Congratulations! Congratulations on purchasing Universal Remote Control's AVEXTM R6 Pre--Programmed and Learning remote control. You now have the power to control your entire home entertainment system with one easy--to--use remote. The AVEX R6 can be used with thousands of audio/video components because of the extensive library of codes that have already been programmed into the remote. So... get ready to sit back, relax, and simplify your home entertainment experience. This Owner's Manual is designed to assist you in programming your AVEX R6 remote to work with your components by guiding you through an easy step-by-step process. Everything you need to know about programming the AVEX R6 is contained in this Manual. AVEX R6 Owner's Manual © 2007 Universal Remote Control, Inc. This document is protected by the copyright laws of the United States and internationally by the Berne Convention. No part of this manual may be reproduced in any form without the express written consent of Universal Remote Control, Inc. Although reasonable care has been taken to assure the accuracy of the information herein contained, Universal Remote Control, Inc. is not responsible for operational, technical or editorial errors or omissions. The specifications and information in this manual may be subject to change without notice. MacroPower, SimpleSound and AVEX are trademarks of Universal Remote Control, Inc. Entertainment Made Simple® is a registered trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective owners. UNIVERSAL remote control The Pioneer in Control Technology 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 Page 2 Table of Contents Getting Started - Overview · Control up to 6 Components ........................5 · Activating Component Buttons .....................5 · Learning Capability ....................................5 · Battery Installation ....................................6 · Low Battery Warning .................................6 · Couch Mode .............................................6 Special Advanced Features · MacroPowerTM & Other Macros ..................7 · `My Favorites' - Favorite Channels ...............7 · SimpleSoundTM & Other `Punch Throughs' ......7 Keypad Layout & Button Functions ...8 Programming AVEX R6 Using Pre-Programmed Codes ........................9 · Quick Set-Up Method .................................9 · Three-Digit Code Entry Method ..................10 · Auto-Search Method .................................12 Programming AVEX R6 Using the Learning Method .................................1 4 Finding a Component's Set-Up Code Number .......................................1 6 Programming Special Advanced Features · Programming Multi-Commands to Macro Buttons .......................................17 · MacroPowerTM Total System On/Off ............17 · `My Favorites' ­ Favorite Channels...............20 · SimpleSoundTM Total System Volume Control...................................................21 · Channel Control `Punch Through' ...............23 · Transport Control `Punch Through' ...............24 · OSD (On-Screen Display) Control `Punch Through' .......................................25 Erasing Commands-Overview ..........26 · Erasing a Single Learned Command ............26 · Erasing All Learned Commands from One Component .......................................27 · Erasing MacroPower & Other Macro Commands .............................................28 · Erasing SimpleSound & Other `Punch Through' Commands .................................29 · Factory Reset ..........................................30 Page 3 Pre-Programmed Code Tables .........31 · CABLE/SAT.............................................32 · TV ...................................................33-34 · DVR/VCR ..........................................35-36 · DVD ......................................................37 · AUDIO...................................................38 · AUX ......................................................39 FAQs ......................................................40 Warranty .............................................41 Specifications .......................................41 Page 4 Getting Started - Overview Control up to 6 Components The AVEX R6 remote control is designed to control up to six different Audio/Video components and operate virtually all brands of AUDIO, TV, DVD, VCR/DVR, SAT/CABLE and AUX (Light, Music Server, etc.) components. Component Buttons Once you have programmed the AVEX R6 for all of your components, all you need to do is press a component button and all the buttons on the AVEX R6 will work with that component. For example, when you press the TV component button, all the buttons on your AVEX R6 will operate your TV. If you press the DVD component button, all the buttons on the AVEX R6 will operate your DVD. Each time you press any of the buttons on the remote, the LED light in the component button will light up to indicate which component you are controlling. TV BUTTON Learning Capability The AVEX R6 has the ability to `learn' functions from the original remote controls of other manufacturers, even if they are not in the Pre-programmed database. Page 5 Battery Installation Press the tab and remove the cover of the battery compartment located in the back of your remote. Insert the two AAA batteries (included in the package) making sure to match the positive (+) and negative (-) symbols as shown in the diagram. Place the cover back over the battery compartment. INSERT BATTERIES CORRECTLY Low Battery Warning When the batteries are low and need to be replaced the component LED will quickly blink three times when you press the Power [ON] button. Couch Mode The AVEX R6 is designed to automatically turn itself off if a button is pressed for more than 30 seconds. This prevents battery power from being depleted should the remote accidentally slip between the couch cushions. Page 6 Special Advanced Features The AVEX R6 also offers the following special advanced features that can offer you many time-saving conveniences: MacroPowerTM & Other Macro Buttons MacroPower is a unique feature that enables you to turn all your components ON or OFF, all at the same time, simply with the press of one button. The AVEX R6 has six Macro buttons that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons will send out the series of commands that are stored in that button. `My Favorites' (Favorite Channels) This is one of the most desirable features of the AVEX R6 remote control. Once it's set up, you can select one of four favorite channels with the press of one button ­ without the need to type in a channel number. So, whether it's CNN or the Food Network, your favorite viewing spot is just one click away. SimpleSoundTM & Other `Punch Throughs' SimpleSound Volume Control is a dynamic feature that gives you total volume control over all the components in your system, even those that do not have their own built--in volume control, such as TIVO, DVD and VCR... saving you the hassle and inconvenience of constantly needing to switch between component modes on the remote. As an example, in order to increase the volume while watching a DVD, you would typically have to pick up the TV remote control to increase the volume. With the AVEX R6, you do not even have to press the TV component button. Once you program SimpleSound in your DVD mode, you will automatically have TV volume control in DVD mode. SimpleSound is what is called a `Punch Through' feature and is not limited to volume control. It can also be applied to Channel Control, Transport Control, and OSD Control. Page 7 Keypad Layout & Button Functions POWER Allows you to turn the selected component on and off. SYSTEM OFF Designed to send Power On/Off commands for up to six components with one button press. TV, CBL, VCR, AUDIO, DVD, AUX Used to select the component you want to operate and signals remote control activity. GUIDE Displays the Program Guide listings through the Cable Set Top Box. MENU Displays the Applications Menu through the Cable Set Top Box. CURSOR NAVIGATION PAD Used for programming steps and onscreen navigation and highlighting. INFO Displays information about the program currently playing or highlighted in the Program Guide through the Cable Set Top Box. EXIT Exits from current screen through the Cable Set Top Box. SELECT Selects highlighted screen options. VOLUME Raises or lowers the sound volume. INPUT Selects the video source from available components. MY FAVORITES Custom-programmable Favorite Channel Buttons LAST Returns to the previously tuned channel through the Cable Set Top Box. TRANSPORT CONTROLS Perform standard VCR and DVD functions when in VCR and DVD mode, or VOD (Video-OnDemand) and DVR (Digital Video Recorder) functions when in Cable mode. MUTE Silences the Audio. Press to activate. Press again to restore sound to the previous level. NUMBER PAD Use to enter code numbers for programming components and to enter channel numbers to tune in channels. Also used to make numeric entries on on-screen menus. PIP CONTROLS Controls Picture-InPicture actions. Page 8 Programming AVEX R6 using Pre-Programmed Codes There are three ways you can program your AVEX R6 using the component brand codes that are preprogrammed into the remote. · Quick Set-Up Method · Three-Digit Code Entry Method · Auto-Search Method The Quick Set-Up Method is a unique new feature that enables the fastest and easiest set-up by using one-digit codes for up to 10 major brands for each component. The Three-Digit Code Entry Method allows you to set-up the AVEX R6 using 3-digit codes for component brand names. It is also a fast and easy way to program the remote. The Auto-Search Method scans through all the brands in the remote control, one at a time. It should be used when either the Quick Set-Up or Three-Digit Code Entry Methods do not work. *** Quick Set-Up Method STEP 1: Manually or using your old remote, turn on the component you want to program--for example, to program your TV, turn on your TV set. STEP 2: Point the AVEX R6 toward the component that you want to program (in this case the TV set) and press and hold the component button (in this case the TV button). While holding down the component button, begin to press numeric keys, one number at a time, starting from 1, continuing to 2, 3 ... 0 until component (in this case the TV) turns off. STEP 3: Release the component button to save the code. The component LED light will blink three times to confirm that the code has been stored. Repeat the above three steps for other components. COMPONENT BUTTONS NUMBER PAD Page 9 Three-Digit Code Set-Up Method STEP 1: Find the 3-digit code numbers assigned to your brand from the lists in the back of this manual. The codes are listed by component category (i.e., TV, VCR, DVD, etc.), then by brand name. For instance, if you would like to locate a code for a Sony television, first locate the TV category and then look for the Sony brand. STEP 2: Once you have located the 3-digit codes for each of the components that you wish to operate with your AVEX R6, write them ALL down on a piece of paper. It's important that you write down all the codes listed for your brand because only one code is going to work with your component. STEP 3: Manually or using your old remote, turn on the component you want to program--for example, to program your TV turn on your TV set. STEP 4: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component LED light turns on. This signals that you are in programming mode. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. COMPONENT BUTTONS SELECT BUTTON Page 10 STEP 5: Point the AVEX R6 toward the component (in this example the TV) and punch in the first 3-digit code that you wrote down for that specific component. Use the Number buttons 0~9 on the remote to punch in the code. The TV LED light will blink each time a number is pressed. NUMBER BUTTONS If the 3-digit code number you just punched in is the correct number, the component you are trying to program will turn off. If it did not turn off, enter the next code number from your list until it does turn off. STEP 6: Once you've entered the code number and the component has turned off, press the POWER button on the AVEX R6 remote to turn the component back on. Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. For example, perhaps your Sony TV turned off with code number 147, but the volume controls did not work properly. In this case, try the next code number listed for that component. Repeat Step 5 using the next code number until you find a perfect match. STEP 7: Once you've entered a correct code you must save it. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored. Now when you press the TV component button, all of the buttons will work with your TV. Program the remaining components by repeating steps 3 through 7. IMPORTANT: If you have tried all the set-up codes in the list and the component still did not turn off after Step 5, either the Auto-Search Method (page 12) or the Learning Method (page 14) will help you program. Page 11 Auto-Search Method The Auto-Search Method is a way you can scan through all of the codes in the table to find the right code for your component. STEP 1: Manually or using your old remote, turn on the component you want to program--for example, to program your TV, turn on your TV set. STEP 2: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component button light turns on. This signals that you are in programming mode. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. UP ARROW DOWN ARROW STEP 3: Point the AVEX R6 remote control toward the component and press the UP arrow (or DOWN arrow) button once. Each time the UP or DOWN arrow button is pressed, the code will count up (or down) one code number and send a Power OFF signal. When the correct code is sent out, the component will turn off. Page 12 STEP 4: Once you have found the right code number and the component has turned off, press the POWER button on the AVEX R6 remote to turn the component back on. Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the buttons do not work properly, you need to find a new code. Continue pressing the UP (or DOWN) arrow button until you find a new code that turns off the component and makes the VOLUME or PLAY buttons respond correctly. STEP 5: Once you have found the right code, you must save it. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored. Now when you press the TV component button, all of the buttons will work with your TV. NOTE: Use this method for those components you cannot program with either the Quick Set-Up or 3-digit Code Entry Methods. IMPORTANT: If you cannot find the right code after 5 minutes of trying the Auto-Search Method, try the Learning Method (page 14). PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT OUR TECHNICAL SUPPORT CENTER. IF YOU NEED ASSISTANCE E-MAIL techsupport@UniversalRemote.com or dial 1-800-901-0800 (9:00AM-6:00PM EST) Page 13 Programming AVEX R6 using the Learning Method STEP 1: Line up the AVEX R6 to the remote control you want to `learn' from, head--to--head as shown below. Make sure the heads are one to two inches apart. STEP 2: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the ENTER [ENT] button at the same time. Hold down both buttons for 2 seconds until the TV Component button light turns on. This signals that you are in programming mode. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 3: Press any button on the AVEX R6 that you want to teach a command to. For example, if you want to teach the MUTE button on the AVEX R6 the TV Mute command from the other remote, first press the MUTE button on the AVEX R6 and the TV component button LED light will blink once indicating that the AVEX R6 is ready to learn the command. STEP 4: Press and hold the MUTE button on the other remote until the component button LED on the AVEX R6 blinks twice. Now you can continue learning all other buttons from your old remote by pressing the next button on the AVEX R6 and repeating this step. Note: The component LED will blink five times if there was an error in the learning process. In this case, please repeat Steps 3 and 4. Page 14 STEP 5: Once the AVEX R6 has learned all the buttons in the selected component mode, press and hold the Component button and ENTER [ENT] buttons at the same time to save the learned functions. The component LED light will blink three times to confirm the programming. Now test all the buttons to make sure they learned correctly. Repeat Steps 1-5 to program any other component modes. If the Learning Method does not work, here are a few suggestions: · If you have a Plasma TV, move to another room · Avoid programming under fluorescent light or direct sunlight · Put new batteries in the old remote · Gradually vary the distance between the two remote controls · Tap the button on your old remote instead of pressing and holding it during the learning process Here are some additional facts regarding the Learning process: · Learned functions override any existing pre-programmed functions on the remote control · Learned functions are automatically erased when a new function is learned on the same button · Learned functions are retained even after a different set-up code number is programmed into the remote control · To return to an original pre-programmed function, a learned function must to be erased Page 15 Finding a Component's Set-up Code Number If you used the Auto--Search or Learning Methods to program a component, you may not know the code number you programmed. Here is a way for you to identify what that code number is, so you can make a note in the back of this Manual for future reference. STEP 1: Press the component button you would like to verify and the SELECT [SEL] button at the same time for 2 seconds until the selected component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. COMPONENT BUTTONS SELECT INFO STEP 2: Press the INFO button and count the number of times the Component LED light blinks. This number indicates the first digit of the code. Next it will pause for about one second and begin blinking again to indicate the number of the second digit. Then once again it will pause, then blink, o indicate the number of the third digit. Example: One blink, pause, eight blinks, pause, three blinks indicates code number 183. Note that ten (10) blinks represent the number 0. Page 16 Programming Special Advanced Features Programming Multi-Commands to Macro Buttons The AVEX R6 has six Macro buttons (POWER, SYSTEM OFF, A, B, C, D) that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons will send out the series of commands that are stored in that particular button. MacroPowerTM Total System On/Off MacroPower makes several devices work together by pressing one button. Imagine the convenience of turning on your TV, your DVD player and your Surround Sound receiver by pressing a single button on your AVEX R6. What could normally take three remotes and three button pushes, the AVEX R6 can accomplish with the press of one button. We call that MacroPower. Any of the Power On or the System Off buttons can be programmed for MacroPower control. To set it up, follow these easy steps: STEP 1: To program MacroPower commands for the Power ON button, press the POWER button and the MUTE button at the same time for 2 seconds until one of the component button LED lights turns on. POWER MUTE Page 17 IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the component button you want to turn on and then the POWER button; repeat for all other components in the order you want them to turn on. The component LED lights will blink once each time you press the P OWER button. POWER COMPONENT BUTTONS STEP 3: Once you've entered all the Power On commands, press the CHANNEL UP button to save your MacroPower commands. The component LED lights will blink three times to confirm that the programming has been successfully saved. CHANNEL UP SUGGESTION: Most of the components have the same signal to turn the power On and Off. You may want to program MacroPower only in the POWER button and save the System Off button to turn components On or Off individually. Note: If you want to program MacroPower for the SYSTEM OFF button, repeat the same steps used for Power ON programming. Page 18 Notes regarding programming multi-commands to Macro buttons: · You can program up to 20 commands on each Macro button. · You can program delays in between commands by pressing the PAUSE button. Each press adds a one-half second delay. · Also, if you add the delay time as the first step of Macro commands, the remote will not send the Macro unless the button is held for two seconds. (This is the Press & Hold Function). · You can also program macro commands in `layers' by pressing the STOP button in between commands. (For example, if you press CBL, 009, STOP, 035, STOP, 365, STOP and the CH+ button in Step 2) the remote will send out 009 at the first press of the `A' button, and then send out 035 at the second press, etc.. · You cannot program the CH+ or PAUSE buttons as macro commands. Page 19 Programming `My Favorites' - Favorite Channel Buttons In Cable mode, the A, B, C, D buttons are also designed to serve as dedicated Favorite Channel buttons. Each button will access one of your favorite channels with just one button press. Here's how to program Favorite Channels: STEP 1: Press the CBL button to select the Cable mode. STEP 2: Press the `A', `B', `C' or `D' button and the MUTE button at the same time for 2 seconds until the CBL component LED turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. MUTE A BUTTON STEP 3: Using the Number Pad, punch in the Channel number of the Favorite Channel that you want to store in the Macro button. The Cable component LED light will blink once for each button pressed. STEP 4: Press the CHANNEL UP button to store the commands entered. The CBL component LED will blink three times to confirm the programming. CHANNEL UP Page 20 SimpleSoundTM Total System Volume Control SimpleSound is one of the most exciting features of the AVEX R6. It gives you total volume control over ALL the components in your system, even those that do not have built--in volume control, such as TIVO, DVD and VCR. SimpleSound saves you the hassle and inconvenience of constantly switching between component modes just to control volume. First you should identify which device in your system will be used to deliver sound. In a basic system, the sound may come from your TV speaker. In a more advanced system, the sound may come from your audio components (such as a Surround Sound Receiver or Home Theatre system). Now, let's set--up SimpleSound. Here's how: STEP 1: Press and hold the button that corresponds to the Component you want to add volume control to (such as a DVD or VCR) and the SELECT (SEL) button at the same time for about three seconds until the component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. COMPONENT BUTTONS SELECT Page 21 STEP 2: Press the VOLUME UP button and then press either the TV or AUDIO component button that you want to use for volume. The Component LED light will blink three times to confirm that it is saved. This sets up three buttons (Volume Up, Volume Down and MUTE) as a group for that component. VOLUME UP Repeat Steps 1-2 for all other components. Note: SimpleSound is what's technically referred to as a "Punch Through" feature and is not limited to volume control. It can also be applied to other groups of buttons. If you find yourself switching to a particular component mode frequently to access a particular control, consider using Punch Through. Page 22 Channel Control `Punch Through' This `punch through' enables you to program the AVEX R6 so that either the Cable or TV Channel Controls (CHANNEL UP, DOWN, LAST, CHANNEL NUMBERS 0-9, +10 and ENTER) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add channel control to, such as DVD or VCR, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the CHANNEL UP button. The component LED light will blink once. COMPONENT BUTTONS SELECT CHANNEL UP STEP 3: Press either the TV or CBL button that you want to use as the source of channel control. The component LED will blink three times to confirm it is saved. Page 23 Transport Control `Punch Through' This `punch through' enables you to program the AVEX R6 so that VCR or DVD Transport Controls (PLAY, STOP, FF, REW, PAUSE, SKIP and RECORD) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add Transport Control to, such as CBL or TV, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the PLAY button. The component LED light will blink once. COMPONENT BUTTONS SELECT PLAY STEP 3: Press either the DVD or VCR button that you want to use as the source of Transport Control. The component LED will blink three times to confirm it is saved. Page 24 OSD (On-Screen Display) Control `Punch Through' This `punch through' enables you to program the AVEX R6 so that CBL or DVD OSD Controls (MENU, GUIDE, INFO, EXIT, SEL and 4 Cursor Controls) will also operate in other component modes on the remote control. STEP 1: Press and hold the component button you want to add OSD Control to, such as TV or VCR, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the MENU button. The component LED will blink once. COMPONENT BUTTONS MENU SELECT STEP 3: Press either the CBL or DVD button that you want to use as the source of OSD Control. The component LED will blink three times to confirm it is saved. Page 25 Erasing Commands -Overview You can erase a single learned command, all learned commands in each component mode, SimpleSound programming, MacroPower commands, or re--set the remote to original factory default settings. Erasing a Single Learned Command from One Component STEP 1: Press the component button where the learned command is stored and the ENTER buttons at the same time for two seconds until the component LED light turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. COMPONENT BUTTONS ENTER STEP 2: Press and hold the button you want to erase for two seconds. The component LED light will blink twice to confirm the erasure. STEP 3: Repeat Step 2 to erase any other buttons in the selected component mode. STEP 4: To exit Erase mode, press and hold both the component button and the ENTER (ENT) button at the same time until the component LED light blinks three times. Page 26 Erasing All Learned Commands from One Component This function allows you to erase all the learned commands from one component. For example, if you want to erase all learned commands on the TV component button because you bought a new TV, the process is very simple. STEP 1: Press the component button where all the learned commands are stored and the ENTER button at the same time for 2 seconds until the component LED turns on. IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press and hold both the component button you want to erase and the PAUSE button at the same time for two seconds, until the component LED light blinks twice to confirm the erasure. COMPONENT BUTTONS PAUSE ENTER STEP 3: To exit Erase mode, press and hold both the component button and the ENTER (ENT) button at the same time until the component LED light blinks three times. Page 27 Erasing MacroPower & Other Macro Commands STEP 1: To erase MacroPower commands on the POWER ON or SYSTEM OFF button, press and hold either the POWER ON or SYSTEM OFF button and the MUTE button simultaneously for two seconds until the current status component LED turns on. IMPORTANT: If you don't proceed to the next step within 30 seconds, the LED will turn off and exit set-up mode and you will need to start over.) STEP 2: Press the CHANNEL UP button to erase and exit Erase mode. The component LED light will blink three times to confirm the erasure. POWER ON SYSTEM OFF CHANNEL UP MUTE NOTE: To erase other Macros, simply press the appropriate button in Step 1 in combination with the MUTE button. Page 28 Erasing SimpleSound & Other `Punch Through' Commands STEP 1: Press and hold the Component button you want to erase volume control from, such as DVD or VCR and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on. STEP 2: Press the VOLUME UP button and the same component button from Step 1. The component LED light will blink three times to confirm the erasure. COMPONENT BUTTONS SELECT VOLUME UP Repeat Steps 1--2 to erase SimpleSound commands from other components. NOTE: To erase other `punch through' commands, simply press the following buttons in place of VOLUME UP in Step 2: · For Channel Control, press: CHANNEL UP · For Transport Control, press: PLAY · For OSD Control, press: MENU Page 29 Factory Reset You can reset your AVEX R6 remote to the original factory default settings. Press and hold both the TV and RECORD buttons for about five seconds until the DVR/VCR component LED light blinks five times. All programming and setup codes that you have entered into the remote will be erased and the AVEX R6 will return to the original factory default settings. Warning This procedure will erase all programming and set-up codes that you have entered into the remote. DVR/VCR TV COMPONENT BUTTON RECORD Page 30 Pre-Programmed Code Tables The AVEX R6 Pre-Programmed code library is classified by category (TV, VCR, DVD, etc.). Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three-digit code. Circle the correct row and refer to it while you perform setup operations. CABLE/SAT Cable Set top boxes and satellite receivers 32 TV DVR/VCR DVD AUDIO AUX TVs, Plasmas, Projectors and Monitors VCRs, DVRs & Combo Units DVD Players and Recorders Amps, Preamps and A/V Receivers iPod, Media PC, Gaming System, Lighting Controls 33-34 35-36 37 38 39 Page 31 CABLE/SAT Brand Code Numbers 004 042 001 110 001 001 099 110 110 251 001 110 099 001 110 110 001 110 110 001 110 108 001 110 001 042 251 110 001 110 110 001 110 111 110 110 110 004 099 110 110 004 110 110 110 110 148 111 253 111 086 110 110 031 001 001 110 044 047 085 001 034 105 047 110 001 001 042 251 001 110 110 001 108 047 004 001 110 001 110 004 004 110 001 110 110 110 250 001 099 ECHOSTAR EXPRESSVU GE GENERAL INSTRUMENT GOI HITACHI HTS HUGHES JVC LG MITSUBISHI NEXT LEVEL PANASONIC PHILIPS PROSCAN RADIOSHACK RCA SAMSUNG SONY STAR CHOICE TOSHIBA VOOM 122 122 116 148 122 114 122 114 122 170 114 148 142 156 114 116 148 116 163 169 175 115 148 114 148 CABLE Boxes ABC ADELPHIA ADVANCED NEWHOUSE ALTRIO AMERICAST ARMSTONG AT&T BROADBAND AT&T IPTV ATLANTIC BROADBAND BELL SOUTH BLUE RIDGE BRESNAN BRIGHT HOUSE BUCKEYE COMM CABLEVISION CHARTER CISCO COGECO COMCAST COMSAT COX DIGITAL DIGEO DIRECTOR GCI GENERAL INSTRUMENT GNC INSIGHT JERROLD MASSILLON MEDIACOM MIDCONTINENT MOTOROLA MOXI NCTC NEW WAVE OAK ONELINK PACE PANASONIC PHILIPS PIONEER RCA RCN RODGERS SCIENTIFIC ATLANTA SEREN SERVICE ELECTRIC SHAW SIGECOM SONY SPRUCER STARCOM SUSQUEHANNA TIME WARNER TORX UNITED CABLE VERIZON VIDEOTRON VISTA III MEDIA WAVE BROADBAND WEHCO VIDEO WEGENER WIDE OPEN WEST SATELLITE Receivers CABLEVISION 148 DIRECTV 173 DISH 122 Page 32 TV Brand Code Numbers 025 072 251 333 247 002 103 028 116 146 248 281 404 405 112 043 073 052 043 054 056 080 112 116 363 112 058 006 477 076 116 333 072 043 238 116 116 002 003 363 058 001 116 043 116 002 003 363 043 258 103 043 043 333 116 073 363 043 050 051 116 043 054 164 043 116 258 363 043 363 043 076 103 363 320 164 363 528 258 333 011 025 116 073 096 570 257 043 399 187 001 024 076 466 072 526 028 048 043 155 005 116 363 047 050 051 076 096 153 116 323 007 057 246 198 028 043 052 043 242 268 073 116 008 009 034 056 074 155 333 363 391 116 073 113 116 102 004 106 112 028 043 363 363 381 028 466 043 081 076 043 419 011 166 363 009 010 012 023 075 158 072 HP 378 316 327 ILO 472 INFINITY 164 INFOCUS 333 330 INTEQ 073 INSIGNIA 350 399 400 052 164 403 JANEIL 002 JBL 164 JCB 001 JCPENNEY 363 024 116 008 009 030 065 258 333 JENSEN 013 JVC 038 034 001 083 199 210 KAWASHO 116 001 KEC 043 KENWOOD 116 001 KLEGG 466 KLOSS 002 059 KREISEN 530 KTV 043 116 KURAZAI 072 LG 363 113 116 102 363 106 112 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 363 LXI 166 007 138 052 251 333 164 MAGNAVOX 164 059 116 003 060 061 363 022 333 094 226 390 MAJESTIC 333 072 MARANTZ 116 164 MATSUI 164 MATSUSHITA 080 MAXENT 242 MEGATRON 116 011 MEMOREX 007 072 363 MGA 116 363 024 028 042 MIDLAND 333 073 MINTEK 282 362 MINUTZ 008 MITSUBISHI 124 109 024 363 028 040 042 146 MONTGOMERY WARD 333 072 MOTOROLA 081 MTC 116 363 258 MULTITECH 043 NAD 138 025 NEC 272 132 134 116 040 024 056 019 262 NET TV 242 NIKEI 043 NIKKO 116 NIKO 527 NORCENT 390 NTC 103 GEM GIBRALTER GOLDSTAR GRUNPY HAIER HALL MARK HANNSPREE HARLEY DAVIDSON HARSPER HARVARD HAVERMY HELLO KITTY HIMITSU HISENSE HITACHI ABEX ADMIRAL ADVENT ADVENTURA AIKO ALERON AKAI A MARK AMERICA ACTION AMPRO AMSTRAD ANAM AOC APEX DIGITAL ASTAR AUDIOVOX BELCOR BELL&HOWELL BRADFORD BROKSONIC BROCKWOOD CANDLE CAPEHART CELEBRITY CENTURION CETRONIC CITIZEN CLARION CLASSIC CLP CLASSIC COLORTYME CONCIERGE CONCERTO CONTEC CORNEA CRAIG CROSLEY CROWN CURTIS MATHES CXC DAEWOO DAYTRON DELL DIGITAL LIFESTYLE DIGITRON DIMENSIA DUKANE DUMONT DURABRAND DIGITAL PROJECTION DWIN DYNASTY DYNEX EIKI ELECTROBAND ELECTROHOME ELECTROGRAPH ELEKTRA ELEMENT EMERSON ENVISION ESA FISHER FUJITSU FUNAI FUTURETECH GATEWAY GE Page 33 TV Brand NUVISION OLEVIA ONKING ONWA OPTIMUS OPTONICA OPTOMA ORION PANASONIC REVOLUTION HD PHILCO PHILIPS PILOT PIONEER POLAROID PORTLAND PRIMA PRISM PROSCAN PROTON PROTRON PROVIEW PROX PULSAR QUASAR RADIO SHACK RCA REALISTIC RUNCO SAMPO SAMSUNG SAMSUX SANSEI SANSUI SANYO SCEPTRE SCOTCH SCOTT SEARS SELECO SHARP SHENG CHIA SHOGUN SIGNATURE SIMPSON SONY SOUNDESIGN SOVA SOYO SPECTRICON SPECTRONIQ SQUAREVIEW STARLITE SSS SUPRA SUPRE MACY SUPREME SVA SYLVANIA SYNTAX OLEVIA TANDY TATUNG TECHNICS TECHNOL ACE TECHWOOD TEKNIKA Code Numbers 351 432 043 043 025 019 251 265 096 080 034 056 164 208 583 466 116 003 059 060 164 363 024 056 164 005 093 038 116 003 363 059 206 116 234 025 018 023 116 272 393 388 363 164 034 333 363 112 058 171 172 392 398 526 572 116 073 034 056 019 363 043 333 065 116 363 024 056 152 023 074 007 019 043 047 072 182 073 395 416 116 058 363 242 258 050 089 105 363 333 228 229 116 076 096 166 007 020 053 057 082 187 276 116 028 043 363 048 138 030 363 007 028 057 094 333 082 166 205 011 251 019 014 028 029 363 022 175 081 116 072 003 001 028 363 003 043 363 528 112 392 398 052 043 363 043 116 002 001 328 116 003 052 059 060 164 333 333 363 432 251 056 034 080 028 363 002 003 363 024 028 043 072 258 TELERENT TERA TMK TNCI TOSHIBA TRUTECH TVS UNIVERSAL VICTOR VIDEO CONCEPTS VIDIKRON VIDTECH VIEWSONIC VIKING VIORE VISCO VITO VIZIO WARDS WAYCON WESTINGHOUSE YAMAHA YORK YUPITERU ZENITH ZONDA 072 172 363 073 138 030 007 040 258 325 529 096 008 009 038 146 174 164 188 363 242 389 002 472 526 363 386 387 363 008 009 019 028 060 061 072 074 164 034 015 076 276 116 363 363 043 363 073 072 095 103 112 Page 34 DVR/VCR Brand VCRs ADMIRAL ADVENTURA AIKO AIWA AKAI AMERICA ACTION AMPRO ANAM AUDIO DYNAMICS AUDIOVOX BROOKSONIC CALIX CANON CCE CITIZEN CRAIG CURTIS MATHES DAEWOO DBX DYNATECH ELECTROHOME ELECTROPHONIC EMERSON FISHER FUNAI GARRARD GE GO VIDEO GOLDSTAR GRADIENTE HARLEY DAVIDSON HARMAN KARDON HITACHI HQ INSTANTREPLAY JCL JCPENNEY JENSEN JVC KEC KENWOOD KODAK LG LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUSHITA MEI MEMOREX MINOLTA MITSUBISHI MOTOROLA MTC MULTITECH NEC NIKKO NORDMENDE OPTIMUS OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER Code Numbers 053 034 117 034 043 117 072 145 012 043 101 129 101 145 117 101 117 003 102 145 117 010 112 012 043 034 053 059 101 006 145 034 101 129 131 153 003 010 008 034 034 145 072 147 144 102 101 013 012 123 034 034 012 034 043 013 034 145 145 012 013 102 101 043 048 043 012 145 101 048 034 145 101 101 013 012 123 034 034 003 102 067 145 034 067 012 145 101 145 145 101 003 010 145 034 053 072 102 013 059 013 145 053 034 102 034 012 043 048 101 043 101 053 070 145 167 013 145 145 034 067 145 067 034 101 101 013 048 PULSAR RADIO SHACK RADIX RANDEX RCA REALISTIC RICO SAMSUNG SANKY SANSUI SANYO SCOTT SEARS SHARP SIGNATURE SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC VILLAIN WARDS XR-1000 YAMAHA ZENITH TV/VCR Combos AMERICA ACTION DAEWOO EMERSON FUNAI GOLDSTAR HARLEY DAVIDSON HITACHI JCPENNEY LG LLOYD MAGNAVOX MEMOREX PANASONIC PHILIPS RADIO SHACK RCA SAMSUNG SEARS SONY SYLVANIA SYMPHONIC THOMAS ZENITH DVR Receivers HUGHES HUMAX PHILIPS 072 123 101 101 144 147 145 013 034 102 003 008 010 145 034 102 053 101 058 102 112 144 147 053 043 048 003 010 102 112 129 131 003 008 010 013 101 112 149 145 034 057 058 003 145 149 154 034 013 145 034 059 067 034 010 034 043 034 043 145 070 145 034 101 034 006 112 131 008 059 013 102 101 102 012 048 012 034 102 034 003 013 145 034 102 053 131 145 034 012 034 043 072 048 101 034 058 117 117 153 034 101 123 034 034 101 101 123 034 034 067 101 070 167 034 067 145 123 034 144 102 101 057 154 058 067 034 034 034 001 001 001 Page 35 DVR/VCR Brand REPLAY NETWORKS SONY TIVO TOSHIBA Code Numbers 775 804 805 001 001 Page 36 DVD Brand AIWA AKAI ALLEGRO APEX DIGITAL BLAUPUNKT BROKSONIC CINEVISION COBY CYBERHOME DENON DURABRAND DVD 2000 EMERSON ENTERPRISE FISHER FUNAI GOLDSTAR GO VIDEO GREENHILL HARMAN KARDON HITACHI HITEKER ILO INITIAL INSIGNIA JBL JVC KENWOOD KISS KLH KRELL LITEON LEXICON LG MAGNAVOX MARANTZ MALATA MERIDIAN MINTEK MITSUBISHI MYRYAD NAD NAKAMICHI NESA ONKYO OPTIMUS OPPO ORION PANASONIC PHILIPS PHILIPS MAGNAVOX PIONEER POLAROID POLK AUDIO RIO RJTECH SAMSUNG SANSUI SANYO SEARS SENSORY SCIENCE SHARP SHINSONIC SONIC BLUE SONY SYLVANIA SYMPHONIC TATUNG TEAC Code Numbers 146 281 091 087 111 115 111 130 091 260 271 138 173 091 017 091 143 074 147 143 091 137 091 220 221 222 111 084 140 101 087 268 111 143 084 012 151 279 135 104 264 265 148 091 057 001 096 143 282 001 095 267 153 111 282 017 102 134 088 103 111 076 035 180 338 023 266 130 138 144 150 285 001 095 035 001 023 131 233 035 001 091 269 165 170 137 159 275 154 147 130 222 094 033 091 002 033 145 191 286 143 143 102 023 270 TECHNICS TECHWOOD THETA DIGITAL TOSHIBA URBAN CONCEPTS VENTURER YAMAHA ZENITH DVD Recorders GO VIDEO CYBERHOME ILO KISS LITEON PANASONIC SENSORY SCIENCE SONY TOSHIBA TV/DVD Combos AKAI AIWA FUNAI INSIGNIA MAGNAVOX MINTEK SAMSUNG SYLVANIA SYMPHONIC TOSHIBA 138 088 023 035 130 141 164 188 273 035 149 138 089 001 197 057 091 220 221 222 271 268 279 265 138 222 191 188 281 146 143 143 282 282 165 143 143 130 TV/DVD/VCR Combos MAGNAVOX 143 PANASONIC 144 SYLVANIA 143 TOSHIBA 164 DVD/VCR Combos GO VIDEO 137 PANASONIC 150 PHILIPS 001 (VCR Functions for VCR 067) SAMSUNG 137 159 SANSUI 154 SONY 145 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR101) Page 37 AUDIO Brand Code Numbers SUNFIRE TEAC TECHNICS THETA DIGITAL TOSHIBA YAMAHA ZENITH SATELLITE Radios DELPHI POLKAUDIO SIRIUS XM SATELLITE RADIO 344 345 182 005 019 049 040 212 217 122 176 193 219 178 177 200 257 262 136 060 087 198 278 026 253 169 067 173 205 264 232 089 274 143 210 082 092 225 161 269 356 170 018 104 202 203 213 211 188 189 335 337 141 077 342 096 097 070 170 224 347 409 460 447 006 028 061 201 214 226 185 013 077 284 CITATION 148 CLARION 026 DENON 001 109 215 230 234 330 ELAN 057 290 ENLIGHTENED AUDIO 099 098 ESCIENT 451 FISHER 214 182 FLEXTRONICS 378 FOSGATE AUDIONICS 148 342 GOLDSTAR 008 HARMAN KARDON 148 233 077 154 118 318 HITACHI 020 INSIGNIA 589 INTEGRA 275 017 046 108 080 209 JAMO 398 JCPENNEY 216 JVC 163 191 114 279 291 KENWOOD 026 066 145 192 182 005 280 374 KLH 331 KOSS 216 573 KRELL 072 384 LEXICON 120 235 236 237 357 360 LINN 124 377 LUXMAN 009 139 052 165 115 004 MAGNAVOX 086 164 152 208 MARANTZ 006 028 031 040 063 185 186 265 289 492 MCINTOSH 238 286 MERIDIAN 100 012 013 MITSUBISHI 242 204 MONDIAL 157 158 042 043 081 112 MYRYAD 077 NAD 186 113 NAKAMICHI 040 244 245 172 183 287 NEC 176 NIRO 343 NILES 403 ONKYO 275 017 046 108 080 209 OPTIMUS 026 041 OUTLAW 342 PANASONIC 032 195 219 177 292 PARASOUND 129 130 132 261 294 295 333 334 PHILIPS 249 250 063 PIONEER 014 039 044 069 168 116 035 078 198 480 PROCEED 144 268 RCA 010 048 117 156 067 288 REALISTIC 019 073 075 095 ROTEL 074 083 085 SAMSUNG 016 SANSUI 040 048 110 063 065 228 SANYO 214 SCOTT 019 SHARP 026 094 175 SHERWOOD 024 102 106 447 SONY 002 018 247 248 166 101 184 218 271 SOUNDESIGN 036 ADCOM AIWA AKAI ANTHEM ARCAM ATLANTIC TECHNOLOGY B&K BOSE BOSTON ACOUSTICS CARVER 515 515 555 515 Page 38 AUX Brand iPod Controls APPLE / iPod BOSE GRIFFIN KENSINGTON TEN TECHNOLOGY Code Numbers 901 912 909 471 906 901 MEDIA PC Controls DELL 001 GATEWAY 001 HP 001 KEYSPAN 797 SONY 001 TOSHIBA 001 WINBOOK 001 GAMING SYSTEM Controls MICROSOFT / XBOX 908 607 SONY / PS2 914 LIGHTING Controls LITE-TOUCH 708 757 LUTRON 658 659 577 X-10 683 594 XANTECH 688 689 URC-R6 AUX (D2A) ARTEC 586 CASTI 587 CRAIG 588 GRIDLINK 592 INET ACCESS 589 INSIGNIA 567 LASONIC 592 MAGNAVOX 584 RCA 585 SANSONIC 592 TIVAX 589 590 ZENITH 567 ZINWELL 591 593 Page 39 Frequently Asked Questions If the batteries run out, will I lose my settings? No. The AVEX R6 stores all of your settings in nonvolatile FLASH memory. You could remove the batteries for months, replace them at your convenience, and the AVEX R6 would still remember your settings. What is MacroPower? MacroPower is a very useful way to make a lot of things happen with one button push. For example, in most home theaters, to watch television, the user must turn on the TV, then turn on the Cable Box or the Satellite Receiver, then turn on the Surround Sound system for sound. Instead of pressing all of those buttons one at a time, MacroPower enables you to turn on all of these components, in the sequence you want, with one button push. For more information on why and how you should program MacroPower commands, refer to page 17 in this Manual. What if my remote control no longer works from a distance? Replace the batteries with new Alkaline batteries. Who can I contact for more answers? The Universal Remote Control technical support and customer service staff are ready to answer any questions you might have. E-Mail us at techsupport@universalremote.com Visit our website www.universalremote.com Call us at (914) -835-4484 Monday - Friday, 9AM to 6PM (EST) USA Limited Warranty Page 41 USA Limited Warranty UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair the product using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product. This warranty does apply to the following: · Units purchased from unauthorized resellers. · Units purchased second-hand (used). · Units installed or deployed for rental or commercial use. · Damage caused by misuse, neglect, or acts of nature. · Products that have been modified or incorporated into other products. · Products purchased more than 12 months ago. Specifications Learning Capability IR frequencies (15kHz to 100kHz) Macro Capability 6 Macros of up to 20 steps each IR Range (Line of Sight via Infrared) 30--50 feet, depending on the environment Weight 6.9 oz. (with batteries) Size 2 1/8" x 1 1/8" x 8 3/4" Batteries Two AAA Alkaline batteries included Page 42 Information To The User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. Page 43 MEMO Page 44 UNIVERSAL remote control The Pioneer in Control Technology 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com OCE-0058A Rev03