Optimum Ergonomics Meet the MX-600 "The Most Reviewed Remote in History" With "No More Pointing" RF Control! The IR/RF MX-600 inherits it's hybrid LCD screen and hard button layout from the acclaimed MX-500 (IR only) remote control. The MX-600 broadcasts radio frequency (RF) signals as well as infrared (IR). Using the MRF-100 RF Base Station, the MX-600 can control infrared A/V components without pointing the remote at all, through walls, floors, and cabinet doors, indoors or outdoors. MX-600 Ultimate Customization TM IR/RF Learning Remote and MRF-100 RF Base Station 50-100' Range Through Walls and Cabinet Doors, Indoors and Outdoors Programs Using Internal IR Command Database or Learning Replaces Up to Ten Remote Controls Macro Capability: 15 Macro Buttons of 20 Steps Each and 50 Favorite Channel Macro Buttons of 10 Steps Each Clone Programming from One MX-600 to Another MX-600 in Less than 3 Minutes Bright Backlighting for Both the LCD Screen and Buttons MRF-100 Radio Frequency (RF) Base Station MX-600/MRF-100 IR/RF Learning Remote The Ultimate In Control Simplicity! Fast On-Board Programming Automation Using Macros and Favorites The powerful memory of the MX-600 offers up to 15 potential Macro buttons and an additional 50 Favorite Channel buttons. Each of these macros can play back a sequence of programmed commands that completely automates a complex system with one button press. A Macro button can record and play back up to 20 steps, while a Favorite Channel button can play back up to 10 steps. Replaces Ten Remote Controls The MX-600 controls up to 10 components. Each of the 10 components can be programmed with up to 2 pages of LCD screens plus the 33 hard buttons. The MX-600 allows you to edit the text on each LCD screen exactly as you prefer (up to 26 screens with 260 text buttons are available). Whether you prefer single screen simplicity or total replacement of the original remotes, the MX-600 will exceed your expectations. Comprehensive Compatibility with Components The MX-600's internal database contains hundreds of "code sets" of various brands, including hard to find and specific discrete codes that allow for precise control of all system components. The MX-600 also has the ability to learn up to 530 new commands. Memory Back-Up The MX-600 system features a smart flash memory back-up system that will retain the programmed memory for up to ten years, even with dead batteries. One Hand Ergonomics ­ Easier to Use than Original Component Remotes! The optimized layout enables you to naturally reach both the thumbpad and hard buttons to navigate on-screen menus and the critical Transport, Channel and Volume controls. You'll quickly discover that you prefer using the MX-600 to control all the special features of your system (especially personal video recorders, satellite receivers, DVD players, surround sound receivers and digital cable boxes). There will never be a reason to dig out the old remotes again. Simplicity Via the RF Base Station No More Pointing - Radio Waves Penetrate Walls, Doors and Floors The MRF-100 receives the RF signals of the MX-600 remote control from any direction. You no longer need to point the remote control at any of your A/V components. You can also place the components distracting blinking lights and displays behind closed cabinet doors and/or in another room! 1. The MX-600 remote control sends radio waves in every direction, so you don't have to point the remote anymore. Specifications MX-600 Remote Control RF Frequency: 418MHz RF Range: 50 to 100 feet, depending upon the environment (the structure of your house, the amount of interference etc.) IR (Line of Sight) Range: 50-60 feet depending upon components Weight: 8 oz. (with batteries) Memory Capacity: 15 Macro Buttons of 20 Steps, 50 Favorite Channel Macro Buttons of 10 Steps and up to 530 IR Commands with up to 26 Custom Labeled Screens. Size: 9.0" x 3.0" x 1.3" Batteries: Four AAA Alkaline batteries included LCD Size: 1.4" x 2.1" Warranty: One year Parts and Labor 2. The MRF-100's built-in Front Blaster sends commands to components in the same cabinet space as the MRF-100. MRF-100 Radio Frequency Base Station Power Supply: 9V 300mA/110V 60Hz (included) IR Flasher Line Outputs: 2.5mm Mono Mini Jack RF Frequency: 418MHz Size: 5 1/8" x 3.5" x 1.25" (4.5" antenna up) Mounting Bracket and Six Emitter/Flashers included 3. Self-adhesive "Flashers" affix to the Infrared sensors on the front panels of your components. The Flashers relay commands to components out of sight of the MRF-100's Front Blaster. The Flashers plug in to the MRF-100's rear flasher line outputs via their 10 foot cables. www.hometheatermaster.com MX-600/M R F- 1 0 0 IR/RF Learning Remote © 2003 Universal Remote Control, Inc. Home Theater Master is a registered trademark of Universal Remote Control, Inc. Entertainment Made Simple is a trademark of Universal Remote Control, Inc. 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532