8-Port 10/100 Ethernet Switch Installation Guide Guide d'installation Installationsanleitung Guida per l'installazione Installatiegids Guía de instalación Manual de Instalação Installationshandbok R24.0318.00 Installation Guide ......................................................................................1 Guide d'installation ...................................................................................9 Installationsanleitung ................................................................................19 Guida per l'installazione.............................................................................27 Installatiegids ...........................................................................................35 Guía de instalación ....................................................................................45 Manual de Instalação.................................................................................55 Installationshandbok .................................................................................65 ..........................................................................73 Installation Package Contents: - 8-Port 10/100 Ethernet Switch - Quick Installation Guide - 7.5VDC power supply Front View LEDS POWER Color - Action Green - Lighted Green - Off Receiving power Not receiving power Function 10/100 LINK/ACT 1-8 (Each LED corresponds with a LAN port on the rear.) Green - Lighted Green - Blinking Yellow - Lighted Yellow - Blinking 100 Mbps LAN link is achieved Sending and receiving data at the corresponding LAN port 10 Mbps LAN link is achieved Sending and receiving data at the corresponding LAN port Back View Port LAN Ports 1 through 8 7.5VDC Function The LAN ports are used to connect Ethernet devices to the LAN. This connection port is for the power supply of the 8-Port 10/100 Ethernet Switch. 1 Before You Begin Note: You Note: For more information, you can also refer to the Support section of the U.S. Robotics Web site at http://www.usr.com/support Note: Your model number is 7908. It is important that you have your serial number written down before you install the 8-Port 10/100 Ethernet Switch. You can find your serial number on the bottom label of the 8-Port 10/100 Ethernet Switch and on the side of the package. If you ever need to call our Technical Support department, you will need this number to receive assistance. Step 1. Connect the power supply Step 2. Connect your 8-Port 10/100 Ethernet Switch to your Ethernet-ready device 2 Congratulations! The installation of your U.S.Robotics 8-Port 10/100 Ethernet Switch is complete. As connections are established with the 8-Port 10/100 Ethernet Switch, the corresponding LED lights will turn on. Repeat this step as needed for up to seven additional devices. This is one of many possible configurations. Note: For networking information, refer to your operating system's documentation. Register your product online at http://www.usr.com/productreg 3 Troubleshooting My 8-Port 10/100 Ethernet Switch is properly connected to my Ethernet-ready device, but I still can't establish a connection. Possible Solution: Verify you are using a known and reliable RJ-45 Category 5 Ethernet cable. An old or unreliable RJ45 Category Ethernet cable could disrupt your connection. It may be necessary to replace your RJ45 Category 5 Ethernet cable. Possible Solution: Check the LED status lights on your 8-Port 10/100 Ethernet Switch. A flashing yellow light indicates you are receiving and transmitting data at 10 Mbps. A flashing green light indicates you are receiving and transmitting data at 100 Mbps. If you don't see any LEDs lighted or blinking, it may be necessary to replace your RJ-45 Category 5 Ethernet cable. Possible Solution: The length of your Ethernet cable between your 8-Port 10/100 Ethernet Switch and your workstation or computer should not exceed 328 feet. Some power sources with strong electromagnetic fields may be causing interference. Possible Solution: It may be necessary to reconfigure the network settings of your operating system. Refer to your operating system's documentation regarding network configuration specifics. My 8-Port 10/100 Ethernet Switch is properly connected to my Ethernet-ready device but my connection speed is slow. Possible Solution: Verify that your network adapter and/or additional Ethernet-ready device supports 100 Mbps. You may be using a 10 Mbps device. To achieve 100 Mbps speeds, replace any 10 Mbps devices you are using with 100 Mbps devices. Possible Solution: Check the LED status lights on your 8-Port 10/100 Ethernet Switch. A flashing yellow light indicates you are receiving and transmitting data at 10 Mbps. A flashing green light indicates you are receiving and transmitting data at 100 Mbps. If you only see blinking LEDs, it may be necessary to replace your RJ-45 Category 5 Ethernet cable. 4 Possible Solution: Verify you are using a known and reliable RJ-45 Category 5 Ethernet cable. An old or unreliable RJ45 Category Ethernet cable could diminish your link quality. It may be necessary to replace your RJ-45 Category 5 Ethernet cable. Possible Solution: The length of your Ethernet cable between your 8-Port 10/100 Ethernet Switch and your workstation or computer should not exceed 328 feet. Some power sources with strong electromagnetic fields may be causing interference. What kind of cables should I use? Possible Solution: The 8-Port 10/100 Ethernet Switch may be used with an RJ-45 Category 5 Ethernet cable. Where is the uplink port? Possible Solution: Each port may be used as an uplink port since each supports auto-crossover. This means that each port on the 8-Port 10/100 Ethernet Switch automatically allows for connecting additional hubs, switches, or routers with an RJ-45 Category 5 Ethernet cable. Are You Still Having Problems? 1. Go to the Support section of the U.S Robotics Web site at www.usr.com Many of the most common difficulties users experience have been addressed in the FAQ and Troubleshooting Web pages for your specific product. The model number for the 8-Port 10/100 Ethernet Switch is 7908. You may need to know this to obtain information on the U.S. Robotics Web site. 2. Call the U.S. Robotics Technical Support Department Technical questions about U.S. Robotics products can also be answered by technical support specialists. Country United States Canada Argentina Brazil México Chile Colômbia Costa Rica Peru Puerto Rico Venezuela China Hong Kong India - Delhi India - Hyderabad Voice (801) 401-1143 (801) 401-1143 AT&T Direct + (877) 643-2523 AT&T Direct + (877) 487-6253 AT&T Direct + (877) 643-2523 AT&T Direct + (877) 643-2523 AT&T Direct + (877) 643-2523 AT&T Direct + (877) 643-2523 AT&T Direct + (877) 643-2523 AT&T Direct + (877) 643-2523 AT&T Direct + (877) 643-2523 10800 650 0217 800 908 425 11 6284198/99/18/19 40 6261600/01/02/03 Online http://www.usr.com/emailsupport http://www.usr.com/emailsupport lat_modemsupport@usr.com brazil_modemsupport@usr.com lat_modemsupport@usr.com lat_modemsupport@usr.com lat_modemsupport@usr.com lat_modemsupport@usr.com lat_modemsupport@usr.com lat_modemsupport@usr.com lat_modemsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com Support Hours 9:00 A.M. - 5:00 P.M., M-F CST 9:00 A.M. - 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00 A.M. ­ 5:00 P.M., M-F CST 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 5 India - Calcutta India - Chennai India - Bombay India - Bangalore Indonesia Japan Korea Malaysia Philippines Singapore South Korea Taiwan Thailand Australia New Zealand Austria Belgium (Flemish) Belgium (French) Denmark Finland France Germany/Hungary Ireland Israel Italy Luxembourg Middle East/Africa Netherlands Norway Poland Portugal Spain Sweden Switzerland UK 33 216 1800/01 44 851 5273/74 22 8252188/93/94/95 80 2380303/04 001 803 6310011 00531 63 0007 00798 6310025 1800 808514 1800 18888426 800 6363037 00798 6310025 00806 31335 001 800 631 0009 1800 125030 0800 449535 07 110 900 116 +32 (0)70 233 545 +32 (0)70 233 546 +45 7010 4030 +358 98 171 0015 082 507 0693 01805671548 +44 870 844 4546 +44 870 844 4546 848 80 9903 +352 342 080 8318 +44 870 844 4546 0900 20 25 857 +47 23 50 0097 +351 (0)21 415 4034 902 117 964 +46 (0) 77 128 1020 +0848 840 200 0870 844 4546 usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com sg_support@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com usrapsupport@usr.com germany_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com france_modemsupport@usr.com germany_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com italy_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com spain_modemsupport@usr.com emea_modemsupport@usr.com emea_modemsupport@usr.com uk_modemsupport@usr.com 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.M-F 9:00A.M.­5:00P.M.,M-F 9:00A.M.­5:00P.M.,M-F 8:00A.M.­6:00P.M.,M-F 9:00A.M.­6:00P.M.,M-F 9:00A.M.­6:00P.M.,M-F 9:00A.M.­5:00P.M.,M-F 10:00A.M.­6:00P.M.,M-F 9:00A.M.­6:00P.M.,M-F 8:00A.M.­6:00P.M.,M-F 9:00A.M.­6:00P.M.,M-F 9:00A.M.­5:30pm,M-F 9:00A.M.­6:00P.M.,M-F 9:00A.M.­6:00P.M.,M-F 9:00A.M.­6:00P.M.,M-F 9:00A.M.­6:00P.M.,M-F 9:00A.M.­5:00P.M.,M-F 8:00A.M.­6:00P.M.,M-F 9:00A.M.­5:00P.M.,M-F 9:00A.M.­5:00P.M.,M-F 8:00A.M.­5:00P.M.,M-F 8:00A.M.­6:00P.M.,M-F 9:00A.M.­5:30P.M.,M-F For current support contact information, go to the following web site: http://www.usr.com Regulatory Approvals FCC Declaration of Conformity U.S. Robotics Corporation 935 National Parkway Schaumburg, Il 60173 U.S.A. declares that this product conforms to the FCC's specifications: Part 15,Class B: Operation is subject to the following conditions: 1.this device may not cause harmful electromagnetic interference. 2.this device must accept any interference received including interference that may cause undesired operations. This equipment uses the following USOC jacks:RJ-45 Radio and Television Interference: This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the manufacturer's instructions, it may cause interference to radio and television communications. The 8-Port 10/100 Ethernet Switch has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a residential installation. Caution to the User: The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. UL Listing/CUL Listing This information technology equipment is UL-Listed and CUL-Listed for the uses described in this Installation Guide. 6 Industry Canada Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of Industry Canada. «AVIS :Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de classe B prescrites dans la norme sur le matériel brouilleur: "Appareils Numériques", NMB-003 édictée par l 'Industrie Canada. Centre de guarantie et de service après-vente: U.S. Robotics Unit-100 13751 Mayfield Pl. Richmond, B.C.Canada V6V 2G9 CE Declaration of Conformity We, U.S. Robotics Corporation of 935 National Parkway, Schaumburg, Illinois, 60173-5157, USA, declare under our sole responsibility that the U.S. Robotics 8-Port 10/100 Ethernet Switch to which this declaration relates is in conformity with the following standards and/or other normative documents: EN60950 EN55022 EN55024 EN61000-3-2 EN61000-3-3 We hereby declare that this product is in compliance to all the essential requirements of Directive 1999/5/EC. The conformity assessment procedure referred to in Article 10(3) and detailed in Annex II of Directive 1999/5/EC has been followed. Ma ...