User manual UTSTARCOM PPC6601KIT - INSTALL GUIDE

Important! Before You Start Using Your Sprint PCS Vision Smart Device (You'll thank us later.) Installing the Pocket PC Desktop Software on Your Windows Operating System Synchronizing Your Sprint PCS Vision Smart Device PPC6601 This guide will walk you through the necessary steps to complete, verify, and perform ActiveSync. This guide will help you install the Pocket PC Desktop Software on your Windows operating system and synchronize your Sprint PCS Vision Smart Device for the first time. If you have previously loaded any Pocket PC software or device USB drivers, please remove the prior software and follow this guide to install the new Pocket PC Desktop software. Note: If you need assistance, please call us at 1-888-987-HELP (4357). Important ! ! Microsoft Outlook must be closed before loading ActiveSync software. DO NOT plug in the USB cable before loading the software. 3 Step Insert the PPC6601 CD-ROM into your computer's CD drive. 1 One of two things will happen: If auto-run is enabled on the computer, the CD will launch and the Main Menu will appear. If auto-run is not enabled, you must manually launch the software by doing the following: 1. Double-click on MY COMPUTER. 2. Double-click on the CD drive for the computer. 3. Double-click SETUP to run the program. 4 Step Select "Getting Started" to log in to the Main Menu. 2 When you click on Getting Started, you will see the following: Start Here Enhance Your Experience Learn More About This CD Help 5 Step 3 Select Start Here. When you click on Start Here, you will see the following: Overview Install Outlook 2002 Install ActiveSync Get Sprint PCS Business ConnectionSM Before you start installing Outlook 2002 or ActiveSync, please read through Important Installation Notes. You can click on Main Menu to return to the previous page at anytime. 6 Step Install Outlook 2002 and ActiveSync. 4 If your computer does not have Microsoft Outlook 98 or later installed, click on Install Outlook 2002, then click on Install.The installation wizard will guide you through the process. Once you have installed Outlook 2002 (if necessary), click on Install ActiveSync, read the Product Details and Installation Guidelines, then click on Install to begin the installation. Follow the instructions on the dialog boxes to install and configure ActiveSync on your PC. Start Installation 7 Step 5 Restart Your Computer. After the software has been completely installed, restart your PC. When your PC boots up, verify that the ActiveSync icon appears in the Desktop Menu Tray (the lower right hand corner of your desktop screen). Desktop Menu Tray ActiveSync Icon in Desktop Menu Tray 8 Step Connect the USB Cradle to your PC. 6 Your PPC6601 comes with a USB cradle which allows you to connect to an available USB port on your desktop PC to run ActiveSync and to recharge your device with the supplied AC Adapter. To connect the USB cradle to your PC, insert the USB connector attached to the cradle into an available USB port on your PC. To allow the cradle to recharge your device's batteries, insert the supplied AC adapter into the adapter port on the cradle and plug the other end into a standard power outlet. You will be able to synchronize and recharge your PPC6601 simultaneously using the USB cradle. Note: AC Adapter plugs into the back of the cradle for battery recharging 9 Step 7 Insert Your PPC6601 into the USB Cradle and Run ActiveSync. With the USB cradle attached to your PC, insert the PPC6601 into the slot on the front of the cradle. Once connected, ActiveSync will automatically detect your device and prompt you to set up a partnership. Follow the prompts on your PC to select your partnership settings, synchronization method, and synchronization settings. Once setup is complete, click . ActiveSync will open and begin synchronizing the selected information between your PPC6601 and your desktop PC. If ActiveSync doesn't launch automatically, right click on the ActiveSync icon in the Desktop Menu Tray and select Open Microsoft ActiveSync. If it does not automatically recognize your PPC6601, select File, and then Get Connected to connect manually. 10 Helpful Hints If you are having difficulties with the software installation, please refer to"Troubleshooting" in the Section 11 of the User's Guide located on the installation CD and www.sprintpcs.com. Never start an ActiveSync operation while your system is booting up. ALWAYS wait until you see the ActiveSync icon in the System Tray (see page 8) prior to starting an ActiveSync operation. For more information about avoiding problems and diagnosing common errors, please see Section 11 of the User's Guide located on the Installation CD, or visit www.sprintpcs.com. If you need further assistance, please call 1-888-987-HELP (4357). 11