Please Read! -- Color TFT LCD Monitor User's Manual Safety Warnings 1. When using AC power, to prevent fire or shock hazard, do not expose this equipment to high humidity or dust. Do not use it in an unprotected outdoor installation or any area classified as a wet area. The operating temperature should be kept between 32 -140 degrees Fahrenheit. Avoid extreme changes of temperature. Do not disassemble the unit, attempt to service it, or put it on an unstable base. Do not drop it and avoid heavy impact. Ventilation: Openings in the enclosure are provided for ventilation (to protect it from overheating). These openings must not be blocked or covered. This unit should not be placed in a built-in installation unless proper ventilation is provided. Cleaning: Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners, use only a damp cloth. Overload: Do not overload outlets and extension cords as this may result in a risk of fire or electric shock. Never force objects or liquids into any opening of the unit ­ electrical shock and/or damage not covered by your warranty may result. Specifications Drive System: Active-matrix TFT-LCD Active Area: 4.45" W x 3.33" H Resolution: 960 W x 234 H Overall Dimensions: 6.14" W x 4.96" H x 1.36" D Luminosity: 300 cd/m2 TYP Input Terminals: Power, RCA Video Power Input: 12V DC +/- 15% Power Consumption: 8W max. Viewing Angles: 30/10/45 (top/bottom/left-right) Video System: NTSC/PAL autoswitch Video Input: 1V p-p (positive) 75 ohm Operating Temp: 32-140 F Operating Humidity: 85% max Picture Adjustments: Color Level and Brightness Weight: 0.9 lb. -You may notice red, blue, or green spots on the panel. This is a characteristic of LCD panels and isn't a problem. The high-precision panel has at least 99.99% effective image pixels, but on .01% of the panel there may be missing or constantly lit pixels. 2. 3. 4. 5. 6. 7. IMPORTANT NOTE: Your monitor comes supplied with an AC/DC power adapter. Depending on the accessories you purchase, you can power and use the monitor in a variety of ways. USING A POWER SOURCE NOT SUPPLIED BY VARIZOOM COULD LEAD TO MALFUNCTION OR DAMAGE NOT COVERED BY YOUR WARRANTY. IF YOU PLAN TO USE A POWER SOURCE FROM ANOTHER MANUFACTURER, MAKE SURE THE VOLTAGE AND POLARITY ARE CORRECT TO PREVENT DAMAGE. CONNECTION AND USE OF THE MONITOR 1. Your monitor comes supplied with an AC/DC power adapter. Depending on the accessories you purchase, you can power and use the monitor in a variety of ways. 2. To mount the monitor on top of your camera, screw the VZ-SHOE * (1) into the threaded hole on the bottom of the monitor (2) and loosen the disc at the base of the VZ-SHOE so that you will be able to insert the square plate into the shoe slot on the camera. Once inserted, you must screw the disc down onto the shoe slot to secure the mount (if you don't screw the disc down, you may not be able to tighten the swivel lock knob). Position your monitor and tighten the swivel lock knob. 1 2 3. Connect the RCA and DC plugs to the jacks on the rear of the monitor. Plug the RCA video cable into the RCA jack (A) and the DC power plug into the DC jack (B). Note: If your camera only has a BNC video output, you can get RCA-to-BNC adapters at most electronics supply stores. The additional RCA connector (C) is for audio monitoring (mono), which is possible using headphones connected to the "Ear Phone" jack on the front of the monitor. B A C 4. Finally, turn on the POWER and adjust the color and brightness to your liking by pressing the appropriate buttons (see below). Note: The "AV INPUT" jack is not functional on this model. * VZ-SHOE (shoemount) and VZ-702M (battery kit) are optional accessories not included with model VZ-TFT (Available kit: VZ-TFT-U monitor kit includes monitor, carrying case, battery kit, shoemount, and sunhood. www.varizoom.com - 888-826-3399