CDX-05 OWNE R 'S MA NUA L NOTE ÇPÅ@ The C DX-05 cannot read C D-R /R W discs that are not finalized. ÇQ The C DX-05 can convert tracks to C D-DA and MP 3 formats. Å@ Å@ If the C D has been made on a computer, it can only read MP 3 and C D-DA formats. Å@ Å@ C D-DA format tracks will be given priority to play when both C D-DA and MP 3 data is Å@ Å@ recorded in the disc, MP 3 tracks will not be played. Å@ Å@ here are features that are not s upported when playing MP 3 tracks . R ead P .20 ŶT Å@ [ MP 3 file playback ] for further instructions. Å@ ÇRÅ@ The C DX-05 cannot guarantee stable operation when playing a [ C OPY GUAR D C D ] or Å@ other C Ds that do not conform to the standard level. For details of standard C Ds, please Å@ Å@ ask the producer of the C D. Å@ J UL. 04. C DX05E 1 D00829300A / ENTER TIME PROFESSIONAL CD PLAYER EJECT (SHIFT) LOOP RELOOP / EXIT EFFECT PLAY MODE SAMPLER DELAY EFFECT SYNC (PGM EDIT) FLANGE FILTER REC COUNT RESET (DISPLAY) LOOP START TAP LOOP ON / OFF LOOP END CUE- PLAY / DEL CUE-SET / INS PLAY (TRK RECALL) CUE 2 CUE 1 CUE 3 (TRK MEMO) SKIP MASTER TEMPO PITCH RANGE PITCH SCRA TCH BRAKE BREAK RSE REVE 300 SEARCH BEND 242 85 NOTE Åú Since the CDX-05 does not support the text display, the text information which are included in the ID tag are not displayed. File number is shown in the TRACK number area and directory number is shown in the parameter display. When parameter display shows the directory number, DIR indicator will light. / ENTER TIME (SHIFT) / ENTER TIME / ENTER TIME (SHIFT) (SHIFT) CD FILTER TIMER start DIRECT mode Å@ , Å@ Å@ *, Å@ Å@ *, Å@ * TOC READ mode Å@ *, Å@ Å@ Å@ Å@ *,Å@ , Å@ Å@ FADER Start mode Factory Preset Memory All Clear 1. Functions and Controls CUE-SET / INS 1-1. Top Panel / ENTER 8 7 9 10 TAP LED 11 (TRK MEMO) TIME 1 / ENTER PROFESSIONAL CD PLAYER EJECT (SHIFT) 13 16 17 18 19 20 21 22 TIME PLAY MODE LOOP RELOOP /EXIT EFFECT PLAY MODE SAMPLER DELAY EFFECT SYNC (PGM EDIT) FLANGE FILTER REC COUNT RESET (DISPLAY) SKIP (SHIFT) (PGM EDIT) 2 3 4 LOOP START TAP LOOP ON / OFF LOOP END CUE- PLAY / DEL CUE-SET / INS PLAY (TRK RECALL) CUE 2 CUE 1 CUE 3 (TRK MEMO) SKIP MASTER TEMPO PITCH RANGE Delete program 1. Enter the program edit mode by pressing and holding the SHIFT key and then pressing the PLAY MODE/ PGM EDIT key. TIME / ENTER SEARCH BEND PITCH PLAY MODE CUE-SET / INS (SHIFT) (PGM EDIT) (TRK MEMO) 12 2. Program number is shown in the parameter display. Select desired program number that you wan to delete the program with the Jog wheel. 5 / ENTER TIME PLAY MODE SCR ATC H BRAKE BREAK E ERS REV (SHIFT) (PGM EDIT) 6 15 14 23 25 24 5. CUE Å@ Locates to the cue point, then pauses. Å@ Stutter play can be performed with this key.ÅiP.11Åj Å@ Selects the CUE key's operation mode.ÅiP.11Åj NOTE Åú If the disc is recorded with multi session , the CDX-05 can read the files in first session area only. ÅúVariable bit rate (VBR) format is not supported. ÅúMP3 playback function does not support following functions. Å@CUE and CUE 1-3 Å@Loop play Å@Search Å@Reverse play Å@Track memory Å@Total remain time display Å@Remain time display Å@Time address bar display - 1. EJECT Å@ disc is ejected. A Å@ Å@ NOTE Å@ These keys cannot be used when direct mode (Preset menu: page 23) is off and a disc is being played back. 2. RELOOP/EXIT, LOOP START, LOOP END Å@ Sets the loop points, or engages or disengages the loop playing.ÅiP.12Åj NOTE ÅúBackward direction of the scratching can be performed up to 7 seconds. 3. Track Skip keys Å@ these to perform track searches. Use 4. SEARCH key Å@ these to perform track searches. Use 7 6. PLAY/PAUSE Å@ Changes the playback mode between playback and pause. Å@ light stays on solid in playback mode and flashes The in pause mode 7. TIME / ENTER / SHIFT Å@ EFFECT SYNC / FLANGE / FILTER / DELAY 10. EFFECT SYNCÅF Turns on and off synchronization of the effect time with the BPM.(P.16) FLANGE ÅF Turns the Flanger effect on and off.(P.17) FILTER ÅF Turns the Filter effect on and off.(P.17) DELAY ÅF Turns the Echo effect on and off.(P.17) 2. Program number is shown in the parameter display. Select the desired track with the track skip keys. SKIP / ENTER TIME or (SHIFT) Å@ Selects the time display mode, either remain, elapsed or total remain. REMAIN ELAPSED :REMAIN indicator in the LCD will light :Elapsed time will show in the numerical portion in display, but no additional indicator will light. TOTAL REMAIN:The track number display area shows the number of tracks of inserted disc, however, for 5 seconds in the end of track, the current track number flashes and for 5 seconds in the beginning of the track, the current track number lights. Å@ Another function of this key is the modifier key (SHIFT function). Holding SHIFT while pressing another key performs the following functions; Å@ SHIFT + PLAY MODE: Program Edit Å@ SHIFT + CUE-PLAY: Track memory Recall Å@ SHIFT + CUE-SET: Track memory Å@ SHIFT + TAP: Parameter display select Å@ SHIFT + JOG: Preset Å@ SHIFT + LOOP END: Loop end point edit Å@ SHIFT + CUE: Select the CUE key' s operation 11. TAP / DISPLAY Å@ Sets the tempo in BPM by tapping this key. When you press this key, the parameter counter mode momentarily changes to TAP BPM display mode. ÅiP.14Åj Å@ Pressing and holding the SHIFT key while pressing this key selects the parameter display mode. Å@ TEMPO -> KEY -> TAP -> BPM -> (FDR) -> 3. Go to next program number by pressing the ENTER key or using the Jog wheel. / ENTER TIME PLAY MODE (SHIFT) (PGM EDIT) 12. CUE-PLAY / TRK RECALL / DEL Å@ Turns the CUE-PLY mode on and off. Å@ Recalls the track memory data. Å@ Deletes the current selected song from the program list. ÅiP.11Åj 1. Enter the program edit mode by pressing and holding the SHIFT key and then press the PLAY MODE/PGM EDIT key. / ENTER SKIP TIME PLAY MODE 13. CUE-SET / TRK MEMO / INS Å@ the cue points with CUE 1-3. Set Å@ Memorizes the track memory data. Å@ Deletes the current selected song from the program list. ÅiP.11Åj (SHIFT) (PGM EDIT) 14. CUE 1-3 8. PLAY MODE / PGM EDIT Å@ Selects the play mode, either all play, single play (1 track play), programmed play, all repeat play, single repeat play or program repeat play. : No indication in the LCD ÅM :ÅM SINGLE indicator in the LCD will ÅL ÅL light Programmed play ÅM ÅL :ÅM ÅL PGM indicator in the LCD will light All repeat play ÅM ÅL ÅM ÅL :ÅM ÅL ÅM ALL and LOOP indicators in the ÅL LCD will light Single repeat play ÅM :ÅM SINGLE ,ÅMand LOOP indicators ÅL S ÅM ÅL ÅL ÅL ÅM ÅL ÅM ÅL in the LCD will light Programmed repeat play:ÅM ÅL ÅM ÅM ÅL ÅM ÅL PGM and LOOPÅL indicators in the LCD will light Å@ Pressing and holding the TIME/ENTER/SHIFT key while pressing the PLAY MODE key, enters program edit mode. ÅiP.20Åj All play Single play Å@ Depending on the setting, these keys locate to cue points, flash start (cue-ply) from cue points, or stutter play from cue points. ÅiP.11Åj 2. Program number is shown in the parameter display. Select the desired program number with the Jog wheel. 15. JOG Wheel / ENTER TIME PLAY MODE Å@ The following functions can be controlled by the Jog wheel. ÅSearch ÅPitch Bend ÅScratch ÅBrake time ÅKey control ÅPreset menu ÅEffect parameters ÅSampler tempo/level ÅProgram edit ÅTrack memory number select (SHIFT) (PGM EDIT) Insert program 1. Enter the program edit mode by pressing and holding the SHIFT key and then pressing the PLAY MODE/PGM EDIT key. / ENTER TIME PLAY MODE 16. REC 9. LCD Å@ Displays visual feedback for CDX-05 functions Å@ this key is pushed once, it will be in a sampling If standby state (blink), and a sampling will be started(lighting) if it pushes on the next . A sampling will be stopped if it pushes again (lights out).(p.18) Sampling time is for 8 seconds at the maximum.ÅB (SHIFT) (PGM EDIT) Sampler output level SAMPLER REC Å@ While pushing the PLAY key then using the Jog wheel adjusts the sampler output level. The sampler output level can be set from 0 (mute) to 100 (default level). LOOP ON / OFF PLAY 3-7. Track Memory / Recall Å@ CDX-05 can memorize the various The Å@ playback settings of current selected tracks up to100 tracks of memory. Track Memory 1. Enter the track memory mode by pressing and holding the SHIFT key then pressing the TRK MEM key. / ENTER TIME CUE-SET / INS Å@ (SHIFT) (TRK MEMO) 4. Press the ENTER key. At this time, if there is stored memory in the selected memory number, indication is displayedÅ@ Å@ Å@ the LCD. Å@ Å@ in Å@ Pressing the ENTER key overwrites the current track data. Pressing any other key cancels the memory operation. TIME / ENTER 2. LCD shows the lowest empty memory number. Memory data WARNING;SHOCK HAZARD-DO NOT OPEN. AVIS;RISQUE DE CHOC ELELCTRIQUE -NE PAS OUVRIR. (SHIFT) DC 8V RISK OF ELECTRIC SHOCK. DO NOT OPEN 11W PROFESSIONAL CD PLAYER POWER DC8V MADE IN CHINA UNDERLICENCE OF VESTAX TOKYO, JAPAN SERIAL NO. L OUTPUT DIGITAL OUTPUT FADER START TT-LINK R 3. Use the Jog wheel to change the memory number if necessary. Å@ l DISC ID ÅE Å@ Å@ ÅE Å@ Å@ CUE point Å@ CUE 1-3 points ÅE Å@ Å@E Å@ Å LOOP A/B points Å@ LOOP mode ÅE Å@ Å@ Play mode Å@ ÅE Å@ MASTER TEMPO On/OffÅE ÅE TAP value Å@ Brake On/Off ÅE Å@ Å@ Brake Time Å@ ÅE Å@ Time mode ÅE S a mpling points for the MP 3 file cannot be memoriz ed NOTE 50 51 46 47 48 49 Recal 1. Enter the recall mode by pressing and holding the SHIFT key and pressing the TRK RECALL key. If there is a track memory data for the current selected track, its memory number is shown in the LCD. Å@ / ENTER / ENTER TIME (SHIFT) TIME CUE-PLAY / DEL The CDX-05 can recall the track (song) from the track memory data. 1. Enter the recall mode by pressing and holding the SHIFT key then pressing the TRK RECALL key. Using the Jog wheel to select the desired track memory number. / ENTER (SHIFT) (TRK RECALL) 2. When track memory number is shown in the LCD, pressing the ENTER key recalls the track memory data. TIME CUE-PLAY / DEL (SHIFT) (TRK RECALL) 19 3-6. Sampler Sampling NOTE Å@ CDX-05 includes eight seconds sampler on each player. The Å@ CDX-05 can memorize the play start point as a cue point. If the cue point is memorized, pressing the CUE key The locates the unit to the cue point. Åú When you sample, please check that the sampler has stopped. Åú Elimination of sampling data cannot be performed. Sampler can always overwrite. To memorize the CUE point 1. Push the REC key once during play or a stop. The REC key blinks at this time and it will be in a REC standby state. SAMPLER REC Å@ After pushing the REC key, if 8 seconds of the maximum recording time passes, sampling will be stopped automatically. SAMPLER REC Å@ There are two ways to store the cue point. Å@ Pressing and holding the SHIFT key then pressing CUE selects the method for the CUE key's operation. / ENTER TIME Å@ Pressing the CUE key when unit is paused stores the current point as the Å@ cue point.Å@ Å@ play start point is stored as the Last CUE point. LOOP ON / OFF LOOP ON / OFF (SHIFT) PLAY PLAY Stutter play with the CUE key 2. Push the REC key again during play or stop, recording will begin and the REC key will light up. 3. If the REC key is again pushed during play or a stop, a sampling will be ended and a deed REC key will switch off blink 3 times. Å@ When unit is paused at the cue point, the unit will play when this key is pressed, and enter pause mode when CUE is released. Å@ the PLAY key is pressed during CUE playback, the unit will go into normal play mode. If Å@ CDX-05 can have another three cue points stored with the CUE 1-3 keys. The SAMPLER REC Sampler Play Å@ After sampling, push PLAY key, and Sampled track will start. If the PLAY key is de- tached, Sampler will stop. To memorize the CUE 1-3 points LOOP ON / OFF 1. Find the desired point. 2. Press the SET key. The parameter display shows . 3. Press the desired CUE key. CUE-SET / INS CUE 2 CUE 1 CUE 3 (TRK MEMO) PLAY Sampler Loop Å@ SAMPLER REC Å@ When the CUE key has the stored point, the CUE key lights. The stored cue point cannot be erased but can be overwritten. Å@ Å@ Presh tha LOOP key then Å@ push the LOOP key to turn the sampler loop play on and off. When sampler loop play is activated, Å@ LOOP LED will light. LOOP ON / OFF ÅE When the unit is paused and the CUE-PLY indicator in the LCD lights, pressing the SET key then pressing the CUE 1-3 key starts the unit automatically. Å@ ÅE When the unit is paused and the CUE-PLY indicator in the LCD doesn't light, pressing the SET key then pressing the CUE 1-3 key flashes the pressed CUE 1-3 key three times then lights. à ...