User manual VIEWSONIC PJ562

ViewSonic PJ552/PJ562 Portable LCD Projector Inage size 30"-300" High Brightness Light Weight LCD Projector ® PJ552/PJ562 User Guide Guide de l'utilisateur Bedienungsanleitung Guía del usuario Guida dell'utente Guia do usuário Användarhandbok Käyttöopas 07/19/04 A ViewSonic PJ552 / PJ562 i Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient of relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Compliance Informatio forCanada This Class B digital apparatus meets all requirements of the Canadian Interfrence-Causing Equipment Regulations. Cet appareil numeique de la Classe B repecte toutes le s exigences du Reglement sur le materiel brouilleur du Canada. Compliance Information for European Countries CE Conformity The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art. 5 with regard to "Electromagnetic compatibility," and 73/23/EEC as amended by 93/68/EEC Art. 13 with regard to "Safety." 07/19/04 A ViewSonic PJ552 / PJ562 ii 07/19/04 A ViewSonic PJ552 / PJ562 iii Copyright © ViewSonic Corporation, 2004. All rights reserved. Apple, Mac and ADB registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo and OnView are registered trademarks of ViewSonic Corporation. VESA and SVGA are registered trademarks of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation. Electronic Warranty Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your projector's warranty on the Internet at: http://www.viewsonic.com For Your Record Document Number: Model Number: Product Name: Purchase Date: Serial Number: A-CD-PJ552 / A-CD-PJ562 VS10386/VS10385 ViewSonic PJ552/PJ562 07/19/04 A ViewSonic PJ552 / PJ562 1 User Information for all Countries Notice: Use the cables which are included with the projector or specified. Contents of package STANDBY/ON VIDEO RGB SEARCH ASPECT AUTO BLANK (1) Projector (2) Remote control with two AA batteries (3) Power cord (4) RGB cable (5) Filter cover for bottom-up use (6) User's manuals (7) Soft case (4) MAGNIFY ON HOME PAGE UP VOLUME END OFF FREEZE PAGE DOWN MUTE KEYSTONE POSITION MENU ENTER ESC RESET (1) (2) (3) (5) (6) (7) NOTE · Keep the original packing materials for future reshipment. For moving the projector, be sure to use the original packing material. Use special caution for the lens part. WARNING . Safety Guide" to operating the unit please your understanding store them in a Notice: Use the cables which are included with the projector or specified. WARNING CAUTION NOTE · Trademark acknowledgment ViewSonic PJ552 /PJ562 2 ViewSonic PJ552 / PJ562 3 2 ViewSonic PJ552 / PJ562 4 ViewSonic PJ552 / PJ562 5 U a ViewSonic PJ552 / PJ562 6 024 68 ViewSonic PJ552 / PJ562 7 ViewSonic PJ552 / PJ562 8 is ed to ViewSonic PJ552 / PJ562 9 ViewSonic PJ552 / PJ562 10 ViewSonic PJ552 / PJ562 11 ViewSonic PJ552 / PJ562 12 ViewSonic PJ552 / PJ562 13 ace ViewSonic PJ552 / PJ562 14 ViewSonic PJ552 / PJ562 15 off all devices prior to connecting them to the projector. ViewSonic PJ552 / PJ562 16 ed V ewSonic PJ552 / PJ562 i 17 ViewSonic PJ552 / PJ562 18 ViewSonic PJ552 / PJ562 19 ViewSonic PJ552 / PJ562 20 ViewSonic PJ552 / PJ562 21 ViewSonic PJ552 / PJ562 22 ViewSonic PJ552 / PJ562 23 ViewSonic PJ552 / PJ562 24 ViewSonic PJ552 / PJ562 25 ViewSonic PJ552 / PJ562 26 ad. ViewSonic PJ552 / PJ562 27 ViewSonic PJ552 / PJ562 28 ViewSonic PJ552 / PJ562 29 ViewSonic PJ552 / PJ562 30 ViewSonic PJ552 / PJ562 31 ViewSonic PJ552 / PJ562 32 for ViewSonic PJ552 / PJ562 33 for ViewSonic PJ552 / PJ562 34 ViewSonic PJ552 / PJ562 35 automatic signal search ViewSonic PJ552 / PJ562 36 GHOST FACTORY RESET ViewSonic PJ552 / PJ562 37 ViewSonic PJ552 / PJ562 38 PRJ-RLC-015 ViewSonic PJ552 / PJ562 39 " Please contact your dealer or ViewSonic for the air filter part number." ViewSonic PJ552 / PJ562 40 ViewSonic PJ552 / PJ562 41 Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on. Message To maximize performance, lamp replacement is recommended. Description After the lamp running reaches 2000 hours, the warning message is displayed, but it won't shut the unit off. The message displays for 30 seconds when the PJ is turned on. If we push any button while displaying the message, the message disappear. The time the filter timer has counted has reached 100 hours. Please clear or change the air filter by referring to the section "Air filter". After caring for the air filter, Please be sure to reset the filter timer. CLEAN THE AIR FILTER POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANNING THE AIR FILTER, RESET THE FILTER TIMER. NO INPUT IS DETECTED ON *** There is no input signal. Please con rm the signal input connection, and the status of the signal source. SYNC IS OUT OF RANGE ON *** fH *****kHz fV *****Hz The horizontal or vertical wavelength of the inputted signal is outside of the response parameters of this unit. Please con rm the specs for this unit or the signal source specs. The internal portion temperature is rising. Please turn the power OFF, and allow the unit to cool down at least 20 minutes. After having con rmed the following items, please turn the power ON again. · Is there blockage of the air passage aperture? · Is the air · Does the peripheral temperature exceed 35°C? · If the same indication is displayed after the treatment, please set the HIGH at the FAN SPEED of the item SERVICE of the OPTION menu. CHECK THE AIR FLOW ViewSonic PJ552 / PJ562 42 ViewSonic PJ552 / PJ562 43 ViewSonic PJ552 / PJ562 44 ViewSonic PJ552 / PJ562 45 ViewSonic PJ552 / PJ562 46