User manual VISIONEER 5800 - INSTALLATION GUIDE

Visioneer OneTouch 58XX Scanner Installation Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2001 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. TextBridge is a registered trademark of ScanSoft, Inc. ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, ZyLAB International, Inc. All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies. Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The software described is furnished under a licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any purpose other than the licensee's personal use and as specifically allowed in the licensing agreement, without the express written permission of Visioneer. Part Number: 05-0464-002 Restricted Rights Legend Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying with all such laws and regulations. Visioneer's Limited Product Warranty If you find physical defects in the materials or the workmanship used in making the product described in this document, Visioneer will repair, or at its option, replace, the product at no charge to you, provided you return it (postage prepaid, with proof of your purchase from the original reseller) during the 12-month period after the date of your original purchase of the product. THIS IS VISIONEER'S ONLY WARRANTY AND YOUR EXCLUSIVE REMEDY CONCERNING THE PRODUCT, ALL OTHER REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT, EXCEPT AS SET OUT ABOVE, THE PRODUCT IS SOLD "AS IS" AND YOU ARE ASSUMING THE ENTIRE RISK AS TO THE PRODUCT'S SUITABILITY TO YOUR NEEDS, ITS QUALITY AND ITS PERFORMANCE. IN NO EVENT WILL VISIONEER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in conflict with the express requirements of applicable law. FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Visioneer 58xx OneTouch Scanner Table of Contents Welcome..................................................................................................... 1 What's in the Box ....................................................................................... 1 What You Need.......................................................................................... 3 Getting the PaperPort Online Documentation ........................................... 3 Step 1: Installing the Scanner Software........................................................................ 4 Step 2: Connecting the Scanner .................................................................................. 5 Step 3: Checking Out Your Scanner ........................................................................... 7 Three Ways to Scan .................................................................................... 10 Scanning by Pressing the OneTouch Buttons.............................................................. 11 Scanning from the Button Panel on the Screen ........................................................... 12 Selecting New Options for the Buttons ....................................................................... 16 Adjusting Scan Settings and Page Settings................................................... 18 Setting Preferences ...................................................................................... 22 Scanning from the PaperPort Software........................................................ 25 Setting Up the Scanner ............................................................................................... 25 Scanning an Item Using the Twain Button................................................. 26 Adjusting Scanner Settings .......................................................................................... 29 Selecting a Predefined Scanner Setting ........................................................................ 30 Selecting Scan Configuration Options ........................................................................ 31 Customizing a Scanner Setting.................................................................................... 32 Adjusting the Brightness and Contrast ........................................................................ 33 Selecting the Area of the Item You Want to Scan ........................................................ 34 Installation Troubleshooting....................................................................... 35 Cleaning the Scanner Glass......................................................................... 36 Contacting Visioneer for Technical Support ............................................... 36 Visioneer OneTouch 58XX Scanner Specifications..................................... 37 How to Uninstall your Scanner................................................................... 38 Uninstalling your Visioneer OneTouch Scanner ......................................................... 38 For Windows 98, 98 SE, &ME............................................................................... 38 For Windows 2000 & XP ....................................................................................... 38 Uninstalling your PaperPort Software ......................................................................... 40 For Windows 98, 98 SE, & ME.............................................................................. 40 For Windows 2000 & XP ....................................................................................... 41 WELCOME Congratulations on purchasing your Visioneer OneTouch 58XX USB scanner. With your scanner, you can quickly scan paper documents and color photos to place their electronic images on your computer. WHAT'S IN THE BOX Before starting the installation, check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the scanner. Visioneer OneTouch 58XX Scanner Installation CD Power supply Note: In addition to this Installation Guide you're reading, the Installation CD also includes the ScanSoft PaperPort Online Documentation, the guide for the ScanSoft PaperPort software. You can print a copy of either of these guides from the CD to your printer. VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE 1 2 VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE THE VISIONEER ONETOUCH 58XX SCANNER 1 2 3 4 5 Document cover Document pad Glass OneTouch button panel Reference frame 6 Power jack 7 USB cable 1 2 3 4 5 Document cover. Close the document cover after placing items on the scanner glass. Document pad. Helps to secure the document in place on the scanner glass. Glass. Place items face down on the glass, aligned at the lower left corner. OneTouch buttons panel. Press a OneTouch button to scan, email, or copy an item. Reference frame. Place items face down within this frame. Markings for standard (8.5"x 11"), A4 (8.25"x11.69") and B5 (7.17"x10.12") sheet sizes appear along the border of the frame. Power jack. Plug the scanner's power supply into this jack. Universal Serial Bus (USB) cable. Plug this cable into your computer's USB port. Note: The scanner does not have an on/off switch. Simply press a button on the front of the scanner to start scanning an item. 6 7 WHAT YOU NEED 3 WHAT YOU NEED To use the scanner and software, you need the following: IBM PC (or 100-percent compatible) Pentium or equivalent MS Windows 98, Windows 2000, Windows Me or Windows XP One available Universal Serial Bus (USB) port on your computer 64 megabytes (MB) or more of available internal memory (RAM) 70 MB of free hard disk space A VGA or SVGA monitor. Recommended settings for your monitor are as many colors as possible--High Color (16-bit), True Color (24-bit or 32-bit). Set the resolution to at least 800 by 600 pixels. To set your monitor's colors and resolution, open the Windows Control Panel, double-click Display, and then click the Settings tab. A CD-ROM drive GETTING THE PAPERPORT ONLINE DOCUMENTATION The Installation CD also includes your PaperPort User's Guide. This guide provides more detailed information about PaperPort's features. Please see the CD to view the manual. You can also print the manual from the CD. 4 VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE STEP 1: INSTALLING THE SCANNER SOFTWARE Note: You must install the scanner software before connecting the scanner to your computer. Otherwise, the correct driver software for your scanner will not be installed and it may not work properly. To install the scanner software: 1. Start Microsoft Windows and make sure that no other applications are running. 2. Insert the CD into your computer's CD-ROM drive. The CD automatically starts. Note: If the CD does not automatically start, make sure the CD drive's door is completely shut. If the CD still doesn't start, click the Windows icon that shows the drives on your computer. (Usually, the icon is named My Computer.) The window shows the drives available on your computer. Double-click the icon for your CD-ROM drive to see the list of files on the CD. Double-click the file named START32.EXE. The CD starts. STEP 2: CONNECTING THE SCANNER 5 3. When the CD window appears, click the "ScanSoft PaperPort" button. Next , click "Install ScanSoft PaperPort software". After the ScanSoft Paperport software has been installed, restart your computer and follow the instructions on the screen to install the other scanner software on your computer. When you are finished installing the software, a message instructs you to connect the scanner to the computer. Be sure to connect the power supply cable to your scanner. 4. When you're finished, click Finish in the dialog box above. STEP 2: CONNECTING THE SCANNER The Visioneer OneTouch 58XX scanner connects to any available USB port. Check your computer's manual for the USB port location. Note: You do not have to shut off the power to your computer when connecting the scanner to a USB port. 6 VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE To connect your Visioneer OneTouch 58XX scanner: Note: If you have not installed the software yet, unplug the cable form the computer and install the software now. When the software installation is complete a message tells you to connect the scanner. 1. Plug the USB cable on the back of your scanner into any USB port on your computer. If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection. 2. Plug the power supply cable into the jack on the back of the scanner, then plug the power supply into a wall outlet. Power supply USB Cable A progress message appears saying that the scanner has been found. The scanner is now correctly installed. 3. To install the other software applications on the CD, reinsert the CD and wait for the opening menu to appear on the monitor. Select "MGI PhotoSuite IIISE" or "Other Great Software". Follow the on-screen instruction to continue each installation. 4. When you are finished installing the other software, remove the CD from your computer and store it in a safe place. STEP 3: CHECKING OUT YOUR SCANNER 7 STEP 3: CHECKING OUT YOUR SCANNER The Visioneer OneTouch 58XX scanner software comes with special software, called the OneTouch software, that you to use scan with the OneTouch buttons. The OneTouch software adds the scanner icon to the Windows taskbar (at the bottom right corner of the computer screen). If the scanner is properly connected, the scanner icon looks like the one in this figure. Scanner Icon If the icon has a red X through it, the scanner is not properly connected. See the next section, "If the Scanner Is Not Properly Connected," for the steps to fix the problem. To check the status of the scanner: 1. Right-click the scanner icon in the Windows taskbar. The shortcut menu appears. 2. Choose About from the shortcut menu. A dialog box confirms that the scanner is properly connected. 8 VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE 3. Click OK to close the dialog box. That's it. Your scanner is ready to scan. See "Three Ways to Scan" on page 10. Note: The scanning lamp under the scanner's glass needs to warm up before you can scan. A status message lets you know when the lamp is ready. The lamp then remains ready so you don't have to wait for it to warm up each time you want to scan. To conserve electricity and prolong the life of the scanner, you can set the length of time for the lamp to remain lit before powering down. See "Setting Preferences" on page 22. IF THE SCANNER IS NOT PROPERLY CONNECTED If the scanner icon on the Windows taskbar has a red "X" through it, the scanner is not properly connected. Check for one of these possible problems: · Is a cable loose or not plugged in securely? Inspect all cable connections. Make sure all the cables are plugged in securely. · Is the scanner's power light on? Turn on the scanner's power. If the light still doesn't come on, plug the power adapter into another electrical outlet. · Did you restart the computer after installing the software? If you didn't restart the computer, it may not have loaded all of the software files. Try restarting your computer. Please see the Readme file in the PaperPort directory on your computer's hard drive. The Readme file contains additional information that may help you diagnose problems connecting the scanner. Also see "Installation Troubleshooting" on page 35 of this Guide for more information. STEP 3: CHECKING OUT YOUR SCANNER 9 To connect the scanner: 1. After checking for all the above problems, right-click the scanner icon with the red X over it. The shortcut menu appears. 2. Choose Connect from the shortcut menu. The software finds the scanner and makes the connection. The scanner icon will no longer have a red X through it, and you're ready to begin scanning. If you try all the troubleshooting procedures described above and in the Readme file, and the scanner icon still has a red X through it, you may have a malfunctioning scanner. Please see "Contacting Visioneer for Technical Support" on page 36 for technical assistance telephone numbers. Also visit our web site at www.visioneer.com for additional technical information. 10 VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE THREE WAYS TO SCAN You can scan items by pressing a OneTouch button, by clicking a button on the screen, or from the PaperPort software (or other Twain software). · Scan with the scanner buttons. Press a button on the scanner's front panel. See "Scanning by Pressing the OneTouch Buttons" on page 11 · Scan from the screen Click the scanner icon on the Windows taskbar. A panel representing the scanner buttons appears. Click a button on the panel on the screen. See "Scanning from the Button Panel on the Screen" on page 12 for details. · Scan from the PaperPort software (or other Twain software) To scan from the PaperPort software, start the software, and then click the Twain icon on the PaperPort Command Bar. You can also scan from other Twain software. See "Scanning from the PaperPort Software" on page 25 for details. SCANNING BY PRESSING THE ONETOUCH BUTTONS 11 SCANNING BY PRESSING THE ONETOUCH BUTTONS Pressing a scanner button scans the item, and then sends the image either to the printer, or to a software application--called the destination application--on your computer. To scan by pressing a button on the scanner: 1. Place an item to scan on the glass, face down, and align the edge of the item with the arrow marker at the lower left corner of the glass. 2. Close the lid and press one of the scanner buttons. The scanner starts scanning the item. Messages just above the Windows taskbar shows the status of the scanning. During scanning, the scan progress window shows a small copy of the image, as illustrated by this example: When the scan is complete, the scanned image appears in the destination software. In this example, the destination software is the PaperPort Desktop. 12 VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE SCANNING FROM THE BUTTON PANEL ON THE SCREEN Scanning from the button panel on the screen is just like pressing a scanner button, except you click the button on the screen. The scanner scans the item, and then sends the image either to the printer, or to a destination application on your computer. This method of scanning is especially helpful if the scanner is not located close to your computer. To scan from the screen: 1. Place an item to scan on the glass, face down, close the lid, and then click the scanner icon on the Windows taskbar. The scanner button panel appears on the screen. 2. Click the button you want to use to scan. The scanner starts scanning the item; the messages about the scanning appear above the Windows taskbar; the progress window shows the image as it is scanned. When the scan is complete, the scanned image appears in the destination application. The icons on the buttons indicate the destination application for the scanned image. For example, in the illustration above, the icon on the email button is for the email application, Outlook Express. When you click the email button, the item is scanned, and then Outlook Espress opens. In this case, the scanned image automatically becomes an attachment to send with an email message. A question mark icon on a button means your computer does not have an application that corresponds to that button's functions. For example, if your computer does not have an email application, the Email button will have a question mark icon on it. ABOUT THE ONETOUCH BUTTONS 13 ABOUT THE ONETOUCH BUTTONS The OneTouch buttons are preconfigured to scan items at various settings, and then send the scanned image to a preselected destination software application. You can change the settings for each button. See "About the Configuration Dialog Box" on page 13. The following table lists the scanner's preconfigured settings: Button Email Copy/Print Scan Preconfigured Settings Scans the item as a color photo and attaches it to a new email message in your email application Prints the scanned item in black and white on your printer/copier at the printer/copier's default resolution Scans the item as an 8.5" x 11" color page and displays it in PaperPort Note: If a button is not preconfigured, the Configuration dialog box appears when you press that button so you can configure it manually. For example, if your computer does not have email software installed, the Email button cannot be preconfigured. ABOUT THE CONFIGURATION DIALOG BOX The Configuration dialog box shows the current settings for each scanner button. The tabs across the top of the dialog box correspond to the buttons. Clicking a tab shows the current settings for the corresponding button on the scanner. 14 VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE For example, the following figure shows the current settings for the Scan button because the Scan tab is selected. The Scan button is set up to scan the item with the configuration named Special Scan for Dark Print, and then after the scanning is finished, to open PaperPort to display the scanned image. The Format and Page(s) setting is to scan as a bitmap for a single page item. Select a software application to send the scanned image to that application. Click this tab to set preferences. Select a setting for scanning the item. Select format and page(s) options for the button. See "Setting Preferences" on page 22 to set Preferences. To display the Configuration dialog box: 1. Right-click the scanner icon. Scanner icon The shortcut menu appears. ABOUT THE ONETOUCH BUTTONS 15 2. Choose Configure from the shortcut menu. The Configuration dialog box appears. The options on the Configuration dialog box are: Select Destination--the list of applications that can open to display the scanned image. Select the application that you want to automatically open to display or process the scanned image. Select Configuration--the list of the button's scan configurations. The configuration settings include: color, black and white, or grayscale, resolution in dots per inch (dpi), page size, brightness, and contrast. To see the details about a configuration, click its icon in the list. Click the icon again to close the detailed information. Clicking an icon expands the configuration to show its settings 16 VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE Select Format and Page(s)--a set of options for selecting a format for the scanned image and whether to scan a single page or multiple pages. The formats are bitmap and PaperPort. Use PaperPort for scanning any item. Bitmaps are usually for photos or artwork. The page icons represent single or multiple page scanning. Scan single page Scan multiple pages Scan multiple pages and stack them on the PaperPort Desktop Properties--displays a dialog box for selecting options about the destination application for the scanned image. Each destination application has its own properties dialog box. Folder Copy--displays a dialog box for selecting the folder to use for storing copies of the scanned images. GETTING HELP IN THE CONFIGURATION DIALOG BOX You can get help with the scanner's features or any of the options on the Configuration dialog box using either of the following methods: When the Configuration dialog box is displayed, press the F1 key on your keyboard Click the Help button at the top right corner of the Configuration dialog box SELECTING NEW OPTIONS FOR THE BUTTONS You can select a new destination application, configuration, and image format for a scanner button to optimize it for the type of scanning you want to do. You use the Configuration dialog box to select new options.