User manual VTECH IA5864

Table of Contents GETTING STARTED. . . . . . . . . . . . . . . . . . . 4 Before You Begin . . . . . . . . . . . . . . . . . . . . . 4 Parts Check List: . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . 5 Choose Location . . . . . . . . . . . . . . . . . . . 5 Install Handset Battery . . . . . . . . . . . . . . . . 5 Connect Power and Telephone Line Cords . . . . . . 6 Wall Mounting . . . . . . . . . . . . . . . . . . . . . 7 Desk/Table Installation . . . . . . . . . . . . . . . . 7 Charge the Handset Battery . . . . . . . . . . . . . 8 Set Language Mode . . . . . . . . . . . . . . . . . 8 Check for Dial Tone . . . . . . . . . . . . . . . . . . 8 Set the Dial Mode . . . . . . . . . . . . . . . . . . . 8 Set Handset Date and Time. . . . . . . . . . . . . . 9 Handset Ringer Style/Battery Save . . . . . . . . . . 9 If you subscribe to DSL service: . . . . . . . . . . .10 Belt clip (optional). . . . . . . . . . . . . . . . . . .10 BASIC OPERATION . . . . . . . . . . . . . . . . . . 11 Telephone Operation . . . . . . . . . . . . . . . . . . 11 Handset Operation . . . . . . . . . . . . . . . . . .11 Base Operation . . . . . . . . . . . . . . . . . . . .12 Temporary Tone Dialing . . . . . . . . . . . . . . .12 Message Waiting . . . . . . . . . . . . . . . . . . .12 Clear Message Waiting Alert . . . . . . . . . . . . .13 Call Transfer . . . . . . . . . . . . . . . . . . . . .13 Headset Jack . . . . . . . . . . . . . . . . . . . . .14 Operating Range . . . . . . . . . . . . . . . . . . .14 Display Screen Messages . . . . . . . . . . . . . .15 Speed Dialing . . . . . . . . . . . . . . . . . . . . . . 16 Store a Number/Name in Speed Dial . . . . . . . . .16 Edit a Number/Name Stored in Speed Dial . . . . . .17 Delete a Number/Name Stored in Speed Dial . . . .18 Dial a Speed Dial Number . . . . . . . . . . . . . .18 Reassign Locations in Speed Dial . . . . . . . . . .18 Telephone Directory . . . . . . . . . . . . . . . . . . 19 Store a Number/Name in the Directory . . . . . . . .19 Edit a Number/Name Stored in the Directory . . . . .19 Delete a Number/Name Stored in the Directory . . .20 Move a Number/Name to the Speed Dial Memory . .21 Dial a Number from the Directory . . . . . . . . . . .21 Caller ID . . . . . . . . . . . . . . . . . . . . . . . . 22 About Call History (Caller ID) . . . . . . . . . . . . .23 Review Call History . . . . . . . . . . . . . . . . . .23 Delete Records from Call History . . . . . . . . . . .24 Dial a Displayed Number . . . . . . . . . . . . . . .24 Store a Call History Record in the Directory . . . . .24 Display Screen Messages . . . . . . . . . . . . . .25 Answering System Operation At the Base . . . . . . . 26 Audible Indicators . . . . . . . . . . . . . . . . . . .26 Setting the clock. . . . . . . . . . . . . . . . . . . .26 About Announcements . . . . . . . . . . . . . . . .26 Record Your Announcement . . . . . . . . . . . . .27 To review your announcement at any time: . . . . . .27 To delete your announcement: . . . . . . . . . . . .27 Setting up your answering system . . . . . . . . . .28 Feature summary . . . . . . . . . . . . . . . . . . .28 Listen to, Save & Delete Messages . . . . . . . . . .29 Call Screening/Intercept. . . . . . . . . . . . . . . .30 Record a Memo . . . . . . . . . . . . . . . . . . . .30 Window display . . . . . . . . . . . . . . . . . . . .31 www.vtechphones.com TABLE OF CONTENTS 1 Answering System Operation - Remote Access . . . . 32 Connect with the Answering System . . . . . . . . .32 Voice Menu . . . . . . . . . . . . . . . . . . . . . .32 Remote Access Commands . . . . . . . . . . . . .32 Batteries . . . . . . . . . . . . . . . . . . . . . . . . 34 Battery Care and Maintenance . . . . . . . . . . . .34 Replacing the Handset Battery . . . . . . . . . . . .34 ADDITIONAL INFORMATION . . . . . . . . . . . . . .35 Troubleshooting. . . . . . . . . . . . . . . . . . . . . 35 Maintenance . . . . . . . . . . . . . . . . . . . . . . 42 Warranty Statement . . . . . . . . . . . . . . . . . . 42 Important Safety Instructions . . . . . . . . . . . . . . 44 FCC, ACTA and IC Regulations . . . . . . . . . . . . 45 The RBRC® Seal . . . . . . . . . . . . . . . . . . . . 46 Technical Specifications . . . . . . . . . . . . . . . . 47 Index . . . . . . . . . . . . . . . . . . . . . . . . . . 48 2 TABLE OF CONTENTS www.vtechphones.com NEED HELP? This book has all the feature operation and troubleshooting you need to install and operate your new VTech phone. Please take the time to review thoroughly to ensure proper installation and the benefit of this VTech innovative and feature rich product. You can also visit our website at www.vtechphones.com for support, shopping, and everything new at VTech. In Canada, please visit www.vtechcanada.com. VTech toll free 1-800-595-9511 In Canada dial 1-800-267-7377 Before You Begin · Important! Before using this telephone, you must read Important Safety Instructions on page 44. Enhanced 5.8GHz Technology - Dual band transmission combines the best of 5.8GHz and 900MHz technologies, providing enhanced performance over standard cordless telephones. Parts Check List: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Base Unit Handsets (2) Charger Power Adaptor Charger Telephone Line Cord Desk/Wall Mount Bracket Belt Clips (2) Base Power Adaptor Batteries (2) User's Manual Charger Power Adaptor Base Unit Handsets (2) Charger To purchase replacement batteries, visit us on the web at www.vtechphones.com or call VTech Communications, Inc. at 1-800-595-9511. In Canada, contact VTech Telecommunications Canada Ltd. at www.vtechcanada.com or 1-800-267-7377. Desk/Wall Mount Bracket Telephone Line Cord Belt Clips (2) Base Power Adaptor Batteries (2) User's Manual 4 GETTING STARTED www.vtechphones.com Getting Started Installation Choose Location For maximum performance of your cordless telephone system: 1. Choose a central location for your base unit. 2. Install your base unit and extension handset away from electronic equipment, such as personal computers, television sets and microwave ovens. 3. In locations where there are multiple cordless telephones, separate base units as much as possible. 4. Install your telephone equipment away from heat sources and sunlight. 5. Avoid excessive moisture, dust or extreme cold. 1 2 Install Handset Battery a) Remove battery compartment cover by pressing on the indentation and sliding downwards. · Use only the provided VTech battery, or equivalent. b) Align the two holes in the plug with the socket pins, then snap the plug into place. c) Place the battery in the compartment with the wires in the lower right corner. d) Replace cover by sliding it up into place. e) Place the handset in its base when not in use to ensure maximum daily performance. www.vtechphones.com GETTING STARTED 5 Installation Connect Power and Telephone Line Cords · Install the base unit away from electronic equipment such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. · Connect the power and telephone line cords to the underside of the base as illustrated. · Plug the AC adapter into an electrical outlet. If the battery has not been previously charged, place the handset in the base, and allow it to charge for 16 hours (or overnight). Connect the telephone line cord to the wall jack. Standard electrical outlet Modular telephone jack Connect the power cord. After charging the battery for at least 16 hours, connect the telephone line cord. 6 GETTING STARTED www.vtechphones.com Getting Started Installation Wall Mounting Your phone base unit is designed to mount on a standard telephone wall plate. Wall mounting is optional. See position one below for instructions. Desk/Table Installation To place your base unit on a desk or table, insert the desk/wall bracket as instructed below and shown in position one or two, depending on your preference of how you'd like the base unit to be angled. Position One To mount your phone on a wall, or to place it on a table or desk, refer to the diagrams illustrating position one. · First insert the lower portion of the bracket into the grooves in the base, then snap the upper portion into place. · Mount the base on the wall by positioning the base unit so the mounting studs will fit into the holes on the base and wall mount bracket. Slide the base unit down on the mounting studs until it locks into place. Position Two This position is an alternate way to install your phone on a table or desk. Position two allows a different viewing angle to your handset and base unit. Refer to the position two diagrams above. · Insert the upper portion of the bracket into the grooves in the base. · Snap the lower portion into place. www.vtechphones.com GETTING STARTED 7 Installation Charge the Handset Battery · If the phone will not be used for a long period of time, remove the battery to prevent possible leakage. · If you have any trouble installing your phone, please refer to the Troubleshooting section near the end of this manual. Place the handset in the base or charger. NEEDS CHARGING will appear on the handset. Charge the battery for at least 16 hours the first time. Set Language Mode · Press PROG, then press or until LANGUAGE is displayed. Press SELECT. · The current setting blinks. Press or until the screen displays the correct language (English, Spanish or French). · Press SELECT to save your selection. Check for Dial Tone Set the Dial Mode · Press PROG. After the batteries are charged, pick up the handset and press PHONE; you should hear a dial tone. If you do not, refer to the TROUBLESHOOTING section in the back of this user's manual. If you have touch tone service, the phone is ready to use as soon as the battery is charged. If you have pulse (rotary) service, you'll need to change the dial mode. · Press or or until the screen displays DIAL MODE: and the current setting. · Press SELECT. The current setting blinks. · Press or to select TONE or PULSE. · Press SELECT to save. 8 GETTING STARTED www.vtechphones.com Getting Started Installation Set Handset Date and Time · · · · · · Press PROG, then press The day is flashing. Press The hour is flashing. Press or or or If you subscribe to caller ID service, the date and time will be set automatically with the first incoming call. If you do not have caller ID service, you can set the date and time manually: until DATE/TIME is displayed. Press SELECT. or until the screen displays the correct month. Press SELECT. until the screen displays the correct day. Press SELECT. until the screen displays the correct hour. Press SELECT. or until the screen displays the correct minute. Press The month is flashing. Press · In the event of a power outage, or if your phone's power cord is unplugged, the time setting will be lost. The minute is flashing. Press SELECT. AM or PM is flashing. Press or to choose between AM or PM. Press SELECT Handset Ringer Style/Battery Save You can select from four different handset ringer styles, or turn the ringer off and extend the battery life. 1. With the handset in idle (off) mode, press PROG. 2. Press 4. Press or or until the screen displays RINGER: and current setting. to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone. 3. Press SELECT. The current setting blinks, and you will hear a sample of the ring. 5. Press SELECT to choose the displayed ringer setting. www.vtechphones.com GETTING STARTED 9 Installation If you subscribe to DSL service: If you hear noise during conversations and/or your caller ID features aren't functioning properly, install a noise filter to the telephone line between the base unit and the telephone line jack. Contact your DSL provider to obtain a noise filter. Noise filter (For DSL users) To single telephone jack (RJ11C) Belt clip (optional) To attach 10 GETTING STARTED To remove www.vtechphones.com Telephone Operation 1. Make a Call Press PHONE, then dial the number. -ORDial the number (use to backspace and make corrections), then press PHONE to call. 2. Flash/Call Waiting During a call, press to receive an incoming call, if call waiting is activated. 3. Channel Press CHAN to switch to a clear channel while on a call. 4. Delete When viewing the call log, press to delete the current record displayed. While handset is in idle mode, press and hold to delete all records in the call log. 5. Answer a Call Press any key to answer a call (except OFF). /CID and /DIR 6. /CID · While on a call, press to decrease the volume. A double beep will sound when you reach the lowest setting. · While phone is not in use, press to display caller ID information. Handset Operation · While entering names or numbers into memory, press to delete last character entered. /DIR · While on a call, press to increase the volume. A double beep will sound when you reach the highest setting. · While phone is not in use, press to display directory entries. · While entering names or numbers, press to add a space. 7. Select Press to display menu, or to select highlighted item from menu. 8. Off During a call, press to hang up. While using menus, press to cancel an operation, back up, or exit the menu display 9. Redial/Pause Press to view redial memory. While entering numbers, press and hold to insert a dialing pause. 10. Program With the handset in idle (on-hook), press to enter programming mode. Basic Operation 6 1,2 8 7 5 3,4 9 10 www.vtechphones.com BASIC OPERATION 11 Telephone Operation Base Operation 11. CHARGE/IN USE · Flashes in unison with an incoming call's ringing. · · Flashes slowly when the handset is in use, or the answering system is answering a call. Glows steadily when the handset is charging. 12. LOCATE HANDSET Press to page the handset for up to 60 seconds. Press again, press OFF on handset or place handset in base to cancel the page. 11 12 Temporary Tone Dialing If you have pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing * TONE. This is useful if you need to send touch tone signals for access to telephone banking or long distance services. 1. Dial the number. 2. Press * TONE. Buttons pressed after this send touch tone signals. 3. After you hang up, the phone automatically returns to pulse service. Message Waiting Your phone is designed to work with most local and regional telephone service provider's voice messaging systems to provide an alert on handset when new messages come in. Voice messaging is a subscription service, available through most service providers for a monthly fee. Contact your local telephone company for more information. 12 BASIC OPERATION www.vtechphones.com Telephone Operation When you have a message waiting, the handset will display: MESSAGE WAITING 5/01 5:40PM Clear Message Waiting Alert If after you review your message(s) your message waiting alert does not go off, you may manually turn it off by: 1. Press PROG on the handset. or until screen displays MESSAGE WAITING. 2. Press 3. Press SELECT, the screen display: CLEAR? YES 4. Press or to change from YES to NO. 5. Press SELECT, you'll hear a confirmation tone. Call Transfer An external call can be forwarded from one handset (HS1) to the other handset (HS2) by following these steps: 1. While on a call, press SELECT on HS1 to forward the call to HS2. HS1 will show: HS2 will ring and show: CALL TRANSFERRED TRANSFERRED CALL · Only one handset can be on a call at a time. For example, if HS1 is on a call and HS2 presses PHONE, CAN'T CONNECT will display. · If the HS2 cannot be found, HS1 will generate a sad tone and continue the call automatically. Before HS2 answers, HS1 can press PHONE to cancel the forward function and continue the external call. · If HS2 doesn't respond within 30 seconds, HS1 will start ringing until PHONE is pressed to pick up the returned call. If it is not answered within another 30 seconds, the external call will end automatically. Basic Operation 2. Press PHONE on HS2 to answer the forwarded call. HS1 will return to the idle mode. www.vtechphones.com BASIC OPERATION 13 Telephone Operation Headset Jack · To purchase a headset, visit us on the web at www. vtechphones.com or call VTech Customer Service at 1-800-595-9511. In Canada, contact VTech Telecommunications Canada Ltd. at www.vtechcanada.com or 1800-267-7377. You can use this telephone handsfree when you install any VTech 2.5 mm headset, purchased separately. Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely. Operating Range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance - which can vary with the locations of the base and handset, the weather, and the construction of your home or office. If you receive a call while you are out of range, the handset might not ring or if it does ring, the call might not connect when you press PHONE. Move closer to the base, then press PHONE to answer the call. If you move out of range during a phone conversation, you might hear noise or interference. To improve reception, move closer to the base. If you move out of range without pressing OFF, your phone will be left off the hook. To hang up properly, walk back into range, periodically pressing OFF. 14 BASIC OPERATION www.vtechphones.com Telephone Operation Display Screen Messages Screen Displays: ** RINGING ** CONNECTING... PHONE ON ** PAGING ** BATTERY LOW SCANNING... When: There is a call coming in. The handset is waiting for dial tone. The handset is in use. Basic Operation The base is paging the handset. The battery needs to be recharged. The handset is changing to another of the 30 channels available. 1. Displays when one handset is on a call and the other handset presses PHONE. CAN'T CONNECT 2. Displays when base power is off and PHONE is pressed. You'll also hear a sad tone. 3. Displays when an out-of-range dial fails to connect. RINGER OFF MESSAGE WAITING The handset ringer is turned off. Displays when you have been alerted by the telephone company that you have received new voice mail. www.vtechphones.com BASIC OPERATION 15 Speed Dialing · The entries you store in speed dial memory will be marked with 01 through 09 and also display in the directory. · Press OFF at any time to exit speed dial mode. · When memory is full the screen displays MEMORY FULL, an error tone sounds and you cannot store a new number until you delete a record in speed dial memory or telephone directory. Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each location) in the speed dial memory locations you assign (numbered 1 through 9) in each handset. These numbers can be dialed with two button presses. You can also store telephone numbers with names alphabetically in the directory. See Telephone Directory for instructions. Store a Number/Name in Speed Dial 1. Press PROG. Then press or until the screen displays SPEED DIAL. 2. Press SELECT. The screen displays ENTER 1-9. 3. Press the key (1 through 9) to assign the speed dial location this number will be stored. The screen displays ENTER NAME. 4. Using the chart below, enter up to 15 characters for the name you're storing. Use and make corrections; use to advance and add a space. Dial Key 1 2 3 4 5 6 7 8 9 0 * # Once 1 A D G J M P T W 0 * & ` , . # B E H K N Q U X C F I L O R V Y 2 3 4 5 6 S 8 Z 9 7 to backspace Twice Presses 3 Times 4 Times 5 Times 6 Times 16 BASIC OPERATION www.vtechphones.com Speed Dialing 5. After you enter the name, press SELECT or PROG. The screen displays ENTER NUMBER. 6. Enter the telephone number. Use to backspace and make corrections. Press REDIAL/PAUSE to enter a pause if necessary. -- OR -- Press REDIAL/PAUSE to display the last number (up to 24 digits long) dialed from this phone. 7. Press SELECT or PROG to store your entry. The screen displays DISTINCT RING? and the current setting. 8. Press or to choose Y (for yes) if you wish the phone to alert you to calls from this number by assigning a distinctive ringer after the first ring. Choose N for a normal ringer. 9. Press SELECT or PROG to confirm. If you chose Y in Step 8, a entry. will be displayed with the · If the location is not empty, your new entry will be stored in place of the old and will delete the former entry. Take caution to not save over entries you do not wish to delete from speed dial memory. Basic Operation Edit a Number/Name Stored in Speed Dial 1. Press and hold the speed dial location key (1-9) of the entry you wish to edit. 2. When the screen displays the entry you want to edit, press SELECT. Then press flashes. SPEED EDIT ERASE 8005959511 01 or until EDIT 3. Press SELECT. The screen displays the name and number. The cursor appears at the end of the name. Use , and the dial pad keys to edit the name. Press SELECT to move on to edit the number. Use to backspace and make corrections. Press SELECT to move on to edit the distinctive ring setting. Press or to choose Y (for yes) if you wish the phone to alert you to calls from this number by assigning a distinctive ringer after the first ring. Choose N for a normal ringer. 4. Press SELECT to save the edited information. www.vtechphones.com BASIC OPERATION 17 Speed Dialing Delete a Number/Name Stored in Speed Dial 1. Press and hold the speed dial location key (1-9) of the entry you wish to delete. 2. When the screen displays the entry you want to delete, press SELECT. Then press ERASE flashes. SPEED EDIT ERASE 8005959511 01 or until 3. Press SELECT. The screen displays ERASE NO YES and the number. The current choice flashes. 4. Press until YES flashes. 5. Press SELECT. You'll hear a confirmation beep. Dial a Speed Dial Number 2. 1. Press and hold the speed dial location key (1-9) of the entry you wish to dial. Press PHONE to dial the displayed memory number. Reassign Locations in Speed Dial 1. Press and hold the speed dial location key (1-9) of the entry you wish to reassign. 2. When the screen displays the entry you want to reassign, press SELECT. Press SPEED flashes. SPEED EDIT ERASE 8005959511 01 or until 3. Press SELECT. The screen displays ENTER 1-9. 4. Press the keys (1-9) to reassign this entry into another memory location. You'll hear a confirmation beep. 18 BASIC OPERATION www.vtechphones.com Telephone Directory Your phone can store 20 (including the nine speed dial entries) telephone numbers with names (up to 15 characters for the name and 24 digits for the number in each location) in the handset. Store a Number/Name in the Directory 1. Press PROG. The screen displays DIRECTORY. 2. Press SELECT. The screen displays ENTER NAME. 3. Using the chart in page 16, enter up to 15 characters for the name you're storing with the number. to backspace and make corrections; use to advance and add a space. Use 4. When you finish entering the name, press SELECT or PROG. The screen displays ENTER NUMBER. 5. Enter the telephone number. Use to backspace and make corrections. Press REDIAL/PAUSE to store a pause if necessary. -- OR -- Press REDIAL/PAUSE to display the last number (up to 24 digits) dialed from this handset. 6. Press SELECT or PROG. The screen displays DISTINCT RING? and the current setting. 7. Press or to choose Y (yes) if you wish the phone to alert you to calls from this number by changing to a distinctive ringer after the first ring. Choose N for a normal ringer. · Press OFF at any time to exit the directory. · When the memory is full the screen will display MEMORY FULL, an error tone sounds and you will not be able to store a new number until you delete a stored number to make room for another entry. Basic Operation 8. Press SELECT or PROG to confirm. If you chose Y in Step 7, a entry. will be displayed with the directory Edit a Number/Name Stored in the Directory 1. Press . The screen displays DIRECTORY. 2. Press or to scroll alphabetically through entries stored in directory. -- OR -- Press the dial pad key for the first letter of the entry you want to edit. www.vtechphones.com BASIC OPERATION 19 Telephone Directory 3. When the screen displays the entry you want to edit, press SELECT. Then press flashes. SPEED EDIT ERASE 8005959511 or until EDIT 4. Press SELECT. The screen displays the name and number. The cursor appears at the end of the name. Use , and the dial pad keys to edit the name. Press SELECT to confirm and move on to edit the number. Use to backspace and make corrections. Press SELECT to confirm and move to edit the distinctive ring setting. 5. Press SELECT to save the edited information. Delete a Number/Name Stored in the Directory 1. Press . The screen displays DIRECTORY. or 2. Press -- OR -- Press the dial pad key for the first letter of the entry you want to delete. 3. When the screen displays the entry you want to delete, press SELECT. Then press ERASE flashes. SPEED EDIT ERASE 8005959511 to scroll alphabetically through entries stored in directory. or until 4. Press SELECT. The screen displays ERASE NO YES and the number. The current choice flashes. 5. Press until YES flashes. 20 BASIC OPERATION www.vtechphones.com Telephone Directory 6. Press SELECT. You'll hear a confirmation beep. Move a Number/Name to the Speed Dial Memory 1. Press . The screen displays DIRECTORY. 2. Press or to scroll alphabetically through entries stored in directory. -- OR -- Press the dial pad key for the first letter of the entry you want to move. 3. When the screen displays the entry you want to move, press SELECT. Then press SPEED flashes. SPEED EDIT ERASE 8005959511 or until Basic Operation 4. Press SELECT. The screen displays ENTER 1-9. 5. Press the key (1-9) to move this entry from the normal directory to the speed dial memory and assign the memory location. You'll hear a confirmation beep. A memory location number (1 through 9) will be displayed with this entry. Dial a Number from the Directory 1. Press . The screen displays DIRECTORY. 2. Press or to scroll alphabetically through entries stored in directory. -- OR -- Press the dial pad key for the first letter of the entry you want to dial. 3. When the screen displays the entry you want to dial, press PHONE. www.vtechphones.com BASIC OPERATION 21 Caller ID Your phone has a caller ID (CID) with call waiting feature that works with service from your local phone service provider. Caller ID with call waiting lets you see who's calling before you answer the phone, even when you're on another call. You may need to change your phone service to use this feature. Contact your phone service provider if: · · · You have both caller ID and call waiting, but as separate services (you may need combined service) You have only caller ID service, or only caller waiting service. You don't subscribe to any caller ID or call waiting services. You can use this product with regular caller ID service, and you can use this product's other features without subscribing to either caller ID or combined caller ID with call waiting service. There are fees for caller ID services, and they may not be available in all areas. This product can provide information only if both you and the caller are in areas offering caller ID service, and if both telephone companies use compatible equipment. 22 BASIC OPERATION www.vtechphones.com Caller ID Caller's telephone number Caller's name Long distance call · If you answer a call before the information appears on the scree n , i t w i l l not be in the call history. · Press OFF at any time to exit call history. · Each handset's call log is independent from the other handset. For example, when you delete one or all call log entries from one handset, they will not be deleted from the other handset. VTech * L 800-595-9511 NEW 5/01 5:40 PM OLD 28 Date of call Time of call This party has called more than once. Position of call in call history Basic Operation About Call History (Caller ID) Indicate whether the record is new or old Your phone can store up to 45 calls in its caller ID (CID) memory. When the memory is full, the oldest call will automatically be deleted to make room for new incoming call information. For each call that comes in, the screen displays the following information between the first and second rings: · · · · 1. Your caller's name (15 letters are sent by your telephone company). The caller's area code and telephone number. The time and date of the call. The repeat tag (*) in the upper right corner, indicating the party has called more than once. Press (CID) to view call history. to scroll through records in call history. Review Call History 2. Use and www.vtechphones.com BASIC OPERATION 23 Caller ID Delete Records from Call History · Caller ID numbers may appear with an area code that may not be required for local calls, or without a 1 that may be needed for long distance calls. If the number displayed is not in the right format, press # repeatedly to see different dialing options. You can choose to dial with or without the area code, or with or without the 1. Delete a Specific Call: 1. Locate the record you want to delete from call history. 2. Press the DELETE key to delete. You'll hear a confirmation beep. Delete All Calls: 1. With the handset in idle (off) mode, press and hold the DELETE key to delete. The screen displays ERASE ALL NO YES. The current choice flashes. 2. Press until YES flashes. 3. Press SELECT. You'll hear a confirmation beep. Dial a Displayed Number 2. 1. Locate the record in call history that you want to dial. If you wish to change how the number is dialed, press #. The screen displays any alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). See the side column for more information on changing the dialing format. or until DIAL flashes. 800-595-9511 OLD 28 5/01 5:40 PM 3. Press SELECT. Press 4. Press SELECT. The number is automatically dialed. -- OR -- When the number is correctly displayed for dialing, you want to dial, press PHONE. DIAL PROGRAM 800-595-9511 OLD 28 5/01 5:40 PM Store a Call History Record in the Directory 24 BASIC OPERATION www.vtechphones.com 1. Locate the record in the call history you want to store in the directory. Caller ID 2. If you wish to change how the number is stored, press #. The screen displays any alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). See the note in the side margin for more information on changing the dialing sequence. 3. Press SELECT, then press flashes. or until PROGRAM 800-595-9511 OLD 28 5/01 5:40 PM DIAL PROGRAM 800-595-9511 OLD 28 5/01 5:40 PM DISTINCT RING? N 800-595-9511 OLD 28 5/01 5:40 PM · Caller ID numbers may appear with an area code that may not be required for local calls, or without a 1 that may be needed for long distance calls. If the number displayed is not in the right format, press # repeatedly to see different dialing options. You can choose to dial with or without the area code, or with or without the 1. Basic Operation 4. Press SELECT three times. The screen displays: 5. Press or to select Y or N for distinctive ringer. 6. Press SELECT. You'll hear a confirmation beep. If you choose Y in step 5, a will be displayed with the directory entry. Display Screen Messages Screen Displays: PRIVATE UNKNOWN * (after name) When: The other party is blocking name and/or number information. Your phone company is unable to receive information about this caller's name and/or number. This caller has called you more than once. www.vtechphones.com BASIC OPERATION 25 Answering System Operation At the Base Audible Indicators · The time will be set automatically with incoming caller ID data. You can however choose to set the time manually. · To advance the minute or year by increments of 10, press and hold CHANGE. Your phone telephone system gives you voice prompts for feature operations and voice confirmations when you press a button or complete an operation. Setting the clock 1. Make sure the answering system is on. 2. Press TIME/SET. The system announces the clock setting, then announces: "To set day and time, press TIME/SET." 3. Press TIME/SET. The system announces the current day. 4. Press CHANGE until the system announces the correct day, then press TIME/SET. The system announces the current hour. 5. Press CHANGE until the system announces the correct hour, then press TIME/SET. The system announces the current minute. 6. Press CHANGE until the system announces the correct minute, then press TIME/SET. The system announces the current year. 7. Press CHANGE until the system announces the correct year, press TIME/SET. The system announces the current clock setting. · · · · You can record two different announcements -- one for normal answering and one for when you've set the system to play the announcement only. Use normal answering when you want the system to record callers' messages. Use announce only when you want to give information to callers without accepting messages. If you choose not to record an announcement, the system answers with a pre-recorded announcement. The normal answering pre-recorded announcement says: "Hello. I'm unable to answer your call right now. Please leave your name, number and a message after the tone." The announce only prerecorded announcement says: "Hello, I'm unable to answer your call right now. Please call again. Thank you." About Announcements 26 BASIC OPERATION www.vtechphones.com Answering System Operation At the Base · By setting announce only to on or off, you decide which announcement your callers will hear when the system answers a call (the system comes set for normal answering, with announce only turned off). See Set announce only, located in the Feature Summary chart later in this section, to change your announcement selection. Enter answering system feature setup and choose a feature to set.. ... Select a feature setting · Announcements less than three seconds in length will not be recorded. Record outgoing announcements, and memos Review/change clock setting; confirm feature settings Basic Operation Turn answering system on or off Record Your Announcement 1. Press MENU until you hear "Record outgoing message." 2. Press REC/MEMO. After you hear " ow recording" followed by a beep, speak toward the base to N record an announcement up to 90 seconds long. 3. Press PLAY/STOP. The system plays back your recorded message. To review your announcement at any time: 1. Press MENU until you hear "Record outgoing message." 2. Press PLAY/STOP, the system plays the current announcement. To delete your announcement: Press DELETE during announcement playback. The system will use the pre-recorded announcement until you record a new one. www.vtechphones.com BASIC OPERATION 27 Answering System Operation At the Base Setting Up Your Answering System · To advance the remote access code number by increments of ten, press and hold the CHANGE key. You can set up one feature at a time, or you can set up the first feature and then move on to set up the other features in sequence. 1. Make sure the answering system is on. 2. Press MENU until the system announces the feature you want to set. Refer to the Feature Summary below for a description of the features and your choices. 3. Press CHANGE until the system announces the desired setting. 4. Press TIME/SET to confirm your selection. 5. Press MENU to move on to the next feature, or press PLAY/STOP to exit feature setup. Feature Summary Default settings indicated by * . System Announces: "Set security code" 19* Description/Directions: Set the remote access code you will use to access features and functions of the answering system from a touch tone phone. You can select any two digit code, from 10 to 99. When message alert is turned on, the base beeps once every 10 seconds when new messages have been received. When you turn announce only on, callers hear your announcement, but cannot leave a message. "Set audible message alert" Off* On "Set announce only" On Off* 28 BASIC OPERATION www.vtechphones.com Answering System Operation At the Base "Set base ringer" On* Off "Set number of rings" 2 4* 6 Toll Saver Turn the base ringer on or off. · You can exit feature setup at any time by pressing a PLAY/ STOP. Choose how many times the phone will ring before the system answers a call. With toll saver active, the system answers after two rings when you have new messages and after four when you have no new messages. Listen to, Save & Delete Messages The system automatically saves your messages until you delete them, and can store approximately 15 minutes of messages, memos, and announcements (up to a maximum of 99 messages). A message or memo can be up to four minutes long. The message window will flash to alert you to new, unplayed messages. If all messages have been reviewed, the number displayed in the window will glow steadily. If the system contains both old and new messages, it will play only the new messages first. After all new messages are played, press the PLAY/STOP to hear all messages. Before playing a message, the system announces the day and time it was received. While the message plays, the message window displays the number of the message. After playing the last message in a E mailbox, the system announces " nd of messages." If the system has less than five minutes of recording time left, it announces remaining time. · If the system has less than 30 seconds of record time left, the answering system turns off. The system will answer after 10 rings and announce "Memory full, please enter your security code" and wait for the caller to enter the remote access code. Basic Operation www.vtechphones.com BASIC OPERATION 29 Answering System Operation At the Base Press to repeat a message; hold to back up and play the previous message. Delete Messages · To delete a message, press DELETE while the message is playing. · Press and hold DELETE to delete all old messages. · You cannot delete a message until it's been reviewed; deleted messages cannot be recovered. Message Window Press to skip to the next message; hold to speed up playback. Play Messages Press to play messages. Press again to stop playback. Call Screening/Intercept 1. Make sure the answering system is on, and set the message playback volume control above level 1 so you can hear the caller' message. s 2. If you decide to take the call, press PHONE on the handset. Record a Memo You can record a memo up to four minutes long, which is stored as an incoming message. 1. Press and release REC/MEMO. 2. The system announces "Now recording". After the beep, speak toward the microphone. The message window displays the length of your memo up to 99 seconds, if you record a memo longer than 99 seconds, 99 continues to flash until you finish. 30 BASIC OPERATION www.vtechphones.com Answering System Operation At the Base 3. To stop recording, press the PLAY/STOP again. Window Display: 0 1-98 0-99 <--> F 1 to 99 (counting) 99 (flashing) 1-8 (on steady for one second) 10 - 99 A 1-98 and A (alternating) ON or OFF (steady for one second) CL <--> (normal display) -- (steady) -- (flashing) When: No messages. Total number of messages, or message number during message playback. Memory is full, or total number of messages is 99. Basic Operation Duration of announcement or memo recording (maximum length of announcement is 90 seconds). Length of recording is more than 99 seconds. Indicates volume level selected when VOL- or VOL+ is pressed. Current remote access code while setting. Announce only mode. System is set to announce only mode and the memory is full. Display when any setting is changed from on or off. Clock needs to be set. System is answering a call or is in remote operation. System is in programming mode or initializing. www.vtechphones.com BASIC OPERATION 31 Answering System Operation - Remote Access Connect with the Answering System 1. Dial your telephone number. 2. When the system answers, enter your remote access code (preset to 19). The system beeps once and then announces the number of new messages. 3. Enter a remote command (see Remote Access Commands). 4. To end remote access, simply hang up the phone. You can access many features of this system remotely from a touch tone phone. Voice Menu The system has voice prompts to help you with remote operation. Press * 5 to hear the menu while remotely connected to the answering system. Remote Access Commands Function: Play messages Repeat a message Skip a message Stop Help Save messages Command: Press 1 to play all messages. Press 2 to play new messages. If there are no new messages, the system plays old messages. Press 4 while message is playing; press 4 4 to back up previous message. Press 6 while message is playing; each press advances to the next message. Press 5. Press *5. Hang up. Function: 32 BASIC OPERATION Command: www.vtechphones.com Answering System Operation - Remote Access Delete message Review announcement Record announcement Record memo Turn system off Turn system on Press 3 while message is playing. Press 3 3 to delete all old messages. Press #7; system plays announcement, then beeps. Press *7; after beep, record announcement, press 5 to stop. System plays back announcement. Press 8, speak after beep; press 5 when finished. Press 0; the system announces, "Answering machine off." Press 0 again to turn the system back on. When system is off, it answers after 10 rings and announces, "Please enter you security code." Enter your remote access code, then press 0 to turn the answering system on. Press #9. Press *9. · If no key is pressed within 10 seconds of entering remote access, the voice menu will be announced. After the voice menu announcement, if no key is pressed within 20 seconds, the remote access call will automatically end. Basic Operation Review remote access code Change remote access code www.vtechphones.com BASIC OPERATION 33 Batteries Battery Care and performance: · If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced. · To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the user's manual. After your battery is fully charged, you can expect the following performance: Operation While in use (talking) While not in use (standby*) * Handset is off the base unit or charger but not in use. Operating time up to 5 hours up to 6 days · · · The battery needs charging when: -- A new battery is installed in the handset. -- The phone beeps twice every five seconds. -- The screen displays BATTERY LOW and the low battery icon. Place the handset in the base so the CHARGE light turns on. The battery is typically fully charged in 16 hours. You can keep the battery fully charged by returning the handset to the base after each use. Replacing the Handset Battery 1. Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward. 2. Lift out the old battery and disconnect. 3. Align the two holes in the new battery's plug with the socket pins, and snap the plug into place. Snap the battery in the compartment, as described in Installation, on page 5. 4. Replace the cover by sliding it up into place. 5. The new battery must be charged before using the phone. Place the handset in the base and allow it to charge for at least 16 hours the first charge. The telephone might operate before that, but for best performance, let the battery charge fully. 34 BASIC OPERATION www.vtechphones.com Troubleshooting If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. Problem My phone doesn't work at all. Suggestion · Make sure the power cord is plugged in. · Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall jack. · Charge the battery in the handset for 18 hours. For optimum daily performance, return the handset to its base when not in use. · Reset the base. Unplug the unit's electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the handset and base to reset. · You may need to purchase a new battery, please refer to the Batteries section of this user's manual. · First try all the suggestions above. · Move the handset closer to the base. You might have moved out of range. · Your line cord might be malfunctioning. Try installing a new line cord. · If the previous suggestions don't work, disconnect the base unit from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local service. Contact your local telephone company. I cannot get a dial tone. Additional Information www.vtechphones.com ADDITIONAL INFO 35 Troubleshooting Problem I cannot dial out. Suggestion · Make sure you have a dial tone before dialing. The handset may take a second or two to find the base and produce a dial tone. This is normal. Wait an extra second before dialing. · Make sure your phone is set to the correct dial mode for the type of service that you have (pulse or touchtone). Refer to the Installation section of this user's manual to set the dial mode. · If the other phones in your home are having the issue, the problem is in your wiring or local service. Contact your local telephone company (charges may apply.) · Eliminate any background noise. Noise from a television, radio or other appliance may cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the handset before dialing, or dialing from another room in your home with less background noise. · Make sure the power cord is securely plugged into the base. Plug the unit into a different, working outlet not controlled by a wall switch. · Move the handset closer to the base. You might have moved out of range. · If the handset is in its base and the charging light does not come on, refer to Charge Light is Off in this troubleshooting guide. · Reset the base. Unplug the unit's electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the handset and base to reset. · Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones. My handset beeps four times and isn't performing normally. 36 ADDITIONAL INFO www.vtechphones.com Troubleshooting Problem CAN'T CONNECT displays on my handset. Suggestion · Only one handset of your phone system can be in use (off hook) at a time. For example, if HS1 is on a call and HS2 presses TALK, CAN'T CONNECT will display. Be sure only one handset is in use at a time. Move the handset closer to the base. You might have moved out of range. If the handset is in its base and the charging light does not come on, refer to The charge light is off in this troubleshooting guide. Reset the base. Unplug the unit's electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the handset and base to reset. Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones. Charge the battery in the handset for 16 hours. For optimum daily performance, return the handset to its base when not in use. You may need to purchase a new battery, please refer to the Batteries section of this user's manual. · · · · The batteries will not hold a charge. · · · Additional Information Your phone might be malfunctioning. Please refer to the Warranty section of this user's manual for further instruction. If you subscribe to DSL service If you hear noise during conversations and/or your caller ID features aren't functioning properly, install a noise filter to the telephone line between the base unit and the telephone line jack. Contact your DSL provider to obtain a noise filter. www.vtechphones.com ADDITIONAL INFO 37 Troubleshooting Problem I get noise, static, or weak signal even when I'm near the base. Suggestion · · Press the CHAN button while on a call until the interference has been eliminated. Other electronic products can cause interference with your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones. Microwaves operate on the same frequency as your phone. It is normal to experience static on your phone while the microwave is running. Do not install this phone in the same outlet or near the microwave. If your phone is plugged in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this solves the problem, re-locate your phone or modem farther apart from one another, or use a different surge protector. Relocate your phone to a higher location. The phone will likely get better reception not installed in a low area. If the other phones in your home are having the issue, the problem is in your wiring or local service. Contact your local telephone company (charges may apply.) Disconnect your base unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company. Make sure the power cord is plugged in. · · · · I hear other calls while using my phone. I hear noise in the handset, and none of the keys or buttons work. · · 38