SIP-Phone User Manual Chapter 1 Overview of the SIP-Phone ................................................................................. 4 1. Hardware Overview .................................................................................................. 5 1.Front View and Keypad function......................................................................... 5 2.Back View........................................................................................................... 9 3.Specification of connector................................................................................... 9 2. Software Features and Specification ...................................................................... 11 3. Physical specification & Environment ..................................................................... 13 Chapter 2 Configuring the SIP-Phone through LCD Phone menus................................. 14 1. Initialize SIP-Phone ................................................................................................ 14 2. LCD Menu Configuration ........................................................................................ 16 Chapter 3 Configuring the SIP-Phone through Web Pages ............................................... 22 Step 1. Browse the IP Address predefined via Keypad............................................... 23 Step 2. Input the login name and password................................................................ 24 Step 3. Enter the web interface main screen .............................................................. 25 Step 4. Start to configure ............................................................................................ 25 1. Network Interface ............................................................................................ 26 2. SIP Information................................................................................................ 29 3. System Configuration ...................................................................................... 31 4. PPPoE Configure ............................................................................................ 32 5. Voice Setting.................................................................................................... 33 6. Phone Book ..................................................................................................... 34 7. DSCP Configure .............................................................................................. 35 8. Password......................................................................................................... 37 9. Rom Configuration........................................................................................... 38 10. Flash Clean ................................................................................................... 39 11. Reboot System .............................................................................................. 40 Chapter 4 Configuring the SIP-Phone through Telnet command lines ............................... 41 1. [help] command ...................................................................................................... 41 2. [quit] command ....................................................................................................... 42 3. [debug] command ................................................................................................... 42 4. [reboot] command................................................................................................... 42 5. [flash] command ..................................................................................................... 42 6. [commit] command ................................................................................................. 43 7. [ifaddr] command .................................................................................................... 43 8. [time] command ...................................................................................................... 44 9. [ping] command ...................................................................................................... 44 10. [pbook] command ................................................................................................. 45 11. [pppoe] command ................................................................................................. 46 1 SIP SIP-Phone Administration Guide 12. [sysconf] command............................................................................................... 47 13. [sip] command ...................................................................................................... 47 14. [security] command............................................................................................... 49 15. [voice] command................................................................................................... 49 16. [tos] command ...................................................................................................... 50 17. [bureau] command................................................................................................ 52 18. [rom] command..................................................................................................... 52 19. [passwd] command............................................................................................... 54 Chapter 5 Upgrading Software on the SIP-Phone ............................................................. 55 1.From LCD Phone Menu........................................................................................... 55 2. Web Management .................................................................................................. 56 3. Remote Control: Telnet ........................................................................................... 57 2 SIP SIP-Phone Administration Guide Revision History Version LP_SIP_100 LP_SIP_100a Date 2004/03 Author Sabrina Software Version Note For test version First released for software only. test version. lp101/201sip.100 For first formal released software. 2004/04/07 Sabrina 3 SIP SIP-Phone Administration Guide Chapter 1 Overview of the SIP-Phone SIP-Phone is a full-featured IP-based telephone set via Ethernet base communication. Over the office LAN connection, it provides IP-PBX solution such as station-to-station call, IP call and local PSTN/PBX Extension call via PSTN Gateway. SIP-Phone provides two 10/100BaseT switch/hub RJ-45 ports allow connecting to office LAN and PC simultaneously. It is compatible with ADSL or Cable Modem provided by ITSP, ISP or Carrier Company to provide VoIP services to residential and SOHO application. SIP-Phone is also an integrated Analog Phone provides IP call or PSTN call selection. When external power is down, it can be a Plain Old Telephone set (POTs). It provides internal high-quality speakerphone, programmable keys and feature buttons. SIP-Phone also embedded with a dot matrix of two lines 24 characters LCD, which can display date and time, calling party name, calling party number, and digits dialed and etc. 4 SIP SIP-Phone Administration Guide Note: (**): May be not available right now, please contact with your distributor. 1. Hardware Overview 1.Front View and Keypad function LCD: 2 lines, 24 character Dot Matrix display. C: Jump out current LCD menu. : Move to previous selection or clear previous data. : Move to right or next selection. OK: Press OK to confirm the modification. Direct Line (DL) Button 1 ­ 10: User press DL button after off-hook to do speed dial 5 SIP SIP-Phone Administration Guide according to phone book data from 1-10 (please refer to LCD configuration-3.Phone Book; Advanced Configurations via Telnet- 10.[pbook] command, or Web Configuration-Phone Book chapter. Number 1 ­10, * and #: The function is the same as the general phone set. Corresponding list of keypad and symbol: (1) Character mode: 1 2 3 4 5 6 7 8 9 * 0 # "1" "A" ; " B" ; "C" ; "2" "D" ; "E" ; "F" ; "3" "G" ; "H" ; "I" ; "4" "J" ; "K" ; "L" ; "5" "M" ; "N" ; "O" ; "6" "P" ; "Q" ; "R" ; "S" ; "7" "T" ; "U" ; "V" ; "8" "W" ; "X" ; "Y" ; "Z" ; "9" "." ; "@" ; "_" ; "-" ; "," ; "!" ; "?" ; "*" ; "'" ; "+" ; "$" ; "*" "Space" ; "0" "#" (2) Digit mode: 1 2 3 4 5 6 7 8 9 * 0 # MUTE: Mute the voice of MIC and let others can't hear from user in communication. PSTN: Press PSTN to switch SIP-Phone as PSTN or IP Phone Mode. In PSTN mode, "PSTN" characters will be displayed on LCD left bottom side, then users can dial out as 6 SIP SIP-Phone Administration Guide "1" "2" "3" "4" "5" "6" "7" "8" "9" "." "0" if standard telephone set in PSTN; in IP Phone mode, "PROXY " characters will be displayed on LCD left bottom side. Note: 1. When SIP-Phone is in PSTN mode, only PSTN and SPEAKER function key can work. 2. On LCD will display "...Incoming Call... " to inform user when SIP-Phone has both IP and PSTN side incoming calls. 3. If in communication with IP side, user can press HOLD to hold IP side, then press PSTN to pick up PSTN side, after that can press HOLD again to retrieve IP side. 4. If in communication with PSTN side, user must hang up PSTN side before pick up IP side. HOLD: To hold a call, after press HOLD button, both sides will hear hold tone. SPEED: 1. Press SPEED and number (Phone book index) after off-hook can do speed dial according to phone book data (please refer to 3.LCD configuration-6. Phone Book or Advanced Configurations via 4.Telnet- 10.[pbook] command). 2. Switch input mode between character mode or digit mode, e.g., when user wants to input phone number can press SPEED to switch input mode as digit mode; when user wants to input name can also press SPEED to switch input mode as character mode. FORWARD: Forward an incoming call to another IP device. (Please refer to LCD configuration-Forward Type) (**) MESSAGE and its indicated LED light: When having missed incoming calls, the MESSAGE LED will be flashing. User can check the information of missed calls by pressing the MESSAGE button. (**) TRANSFER: 1. Transfer a call to the third site. When A and B are in communication, A wants to transfer this call to C, A can press TRANSFER button, now B will hear hold tone, and A will hear dial tone, then A can press phone number of C, after C picks up, A can talk with C, after A hangs up, B and C can be connected. Note: 1. A cannot press phone number of C before hearing dial tone. 2. If A press TRANSFER and number, press TRANSFER again can cancel transferring and retrieve call with B. 7 SIP SIP-Phone Administration Guide 3. If A press TRANSFER and number of C, C is ringing, press TRANSFER again C will return to standby mode and A can retrieve call with B. 4. Before C picks up, A cannot hangs up the phone. 2. Change characters to be capital or lowercase: when pressing TRANSFER before press letters can switch input type of letters. REDIAL: Redial the last outgoing call. + And -: Adjust the voice volume heard of communication. SPEAKER: Hand free mode. User can talk without picking up handset. Note: All function keys mentioned above (except dialing keypad) are effective only in IP Phone mode. (**) 8 SIP SIP-Phone Administration Guide 2.Back View DC 9V: DC 9V power input outlet LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5 cable. PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable Line: RJ-11 connector, connected directly to the PSTN analog line. Note: There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port. When network status is regular, LED of LINK/ACT will light on; when SIP-Phone is transmitting or receiving data, LED will be flashing; when transmit rate is in 10 mbps or 100mbps, LED of 10/100 will light off or light on. 3.Specification of connector 1 Ethernet Port Ethernet port is for connecting SIP-Phone to network, transmit rate supports 10/100 Base-T. 9 SIP SIP-Phone Administration Guide Ethernet connector 2 RJ-11connector LAN RJ-11 connector is for connecting SIP-Phone with PSTN. RJ11connector 10 SIP SIP-Phone Administration Guide 2. Software Features and Specification Application: ISP/ITSP (Internet Telephony Service Provider) IP-PBX with office telephony services Multi-nation enterprise communication SOHO Telephony Calling Features Call Hold Call Transfer Call Forward (**) 10 sets last number Redial Ten configurable speed dials Network Supported Fixed IP Dynamic Host Configuration Protocol (DHCP) PPPoE connection (When PPPoE disconnect, SIP-Phone can automatically re-connect) Behind NAT IP Sharing Device Support QOS by setting DSCP (Differentiated Service Code Point) parameters of VoIP packet Support 802.1p1q (VLAN) (**) Audio Features G.711 a/-Law, G.723.1, G.729, G.729a VAD, CNG G.165/G.168 compliant echo cancellation Programmable Dynamic Jitter B ...