37" HD VIDEO MONITOR Model LVM-37w1 Contents English Product Safety Instructions .................................................. 1 Safety Guidelines............................................................... 2 Cleaning the HD Video Monitor............................................. 3 INSTALLATION Package Contents.............................................................. 4 Front View of the HD Video Monitor........................................ 5 Rear View of the HD Video Monitor........................................ 5 Side View of the HD Video Monitor......................................... 6 Remote Control.................................................................. 8 Installation....................................................................... 9 OSD Functions PICTURE PARAMETERS: Brightness / Contrast / Saturation / Hue / Color Temp / Sharpness / Aspect Ratio / Backlight / Reset.............................. 13 PC PARAMETERS: Auto Adjust / Clock / Phase / Position................14 AUDIO SETTINGS: Volume / Bass / Treble / Balance / Mute / Speaker / Reset..................................................... 15 PICTURE-IN-PICTURE: Display Mode / Main Source / PIP Source / Swap / PIP Position / PIP Size / Audio From.. 16 GENERAL SETTINGS: Menu Position / Menu Timeout / Language / Sleep Timer / Transparency / DPMS / System Info / Factory Reset...................... 17 Specifications.................................................................. 18 Troubleshooting ............................................................... 19 PRODUCT SAFETY INSTRUCTIONS Follow and obey all warnings and instructions marked on the HD Video Monitor. For your safety, please read all the safety and operating instructions before you operate the HD Monitor Keep this user's manual for future reference. Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords and each end of the cords for damage. The HD Monitor shall be installed near a wall socket outlet and the plug on power cord shall be readily accessible. Ventilation Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable operation of the HD Monitor and to protect it from overheating, these openings must not be blocked or covered. · Do not block the openings by placing the HD Monitor on a bed, sofa, rug or other similar surface. · Do not place the HD Monitor in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer's instruction have been adhered to. Other Notices · Avoid exposing the HD Monitor to direct sunlight or high temperatures. · Avoid exposing the HD Monitor to moisture or high humidity. · Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by anyone not authorized by Westinghouse Digital. · If the HD Monitor will not be used for a long period of time, unplug the HD Monitor and remove the batteries from the remote control. Precautions · Avoid touching the screen. Skin oils are difficult to remove. · Never remove the rear cover. The HD Monitor contains high-voltage parts. You may be seriously injured if you touch them. · Avoid exposing the HD Monitor to direct sunlight or another heat source. Orient the HD Monitor away from direct sunlight to reduce glare. · Always handle the HD display with care when moving it. · Place the HD Monitor in a well-ventilated area; don't place the HD Monitor in airtight compartments. Do not place anything on the HD Monitor that prevents heat dissipation. · Ensure that the area around the HD Monitor is clean and free of moisture. · Do not place heavy objects on the HD Monitor, audio/video cables, or power cord. · If the HD Monitor emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact the Westinghouse Service Center. · WARNING ­ To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose The HD Monitor To Rain Or Moisture! The HD Monitor shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the Monitor. English 1 Safety Guidelines CAUTION: The power supply outlet should be located near the HD Monitor and should be easily accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below: USA..................UL Switzerland ..... SEV Canada.............CSA Britain ............. BASE/BS Germany..........VDE Japan ............... Electric Appliance Control Act English IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The specific power cord for this HD Monitor is enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and should look like Figure A1 below: Figure A1 Figure A2 For the United States and Canada In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled. For LCD Monitors that are placed on a desk or table, type SVT or SJT cord sets may be used. For LCD Monitors placed directly on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for the LCD Monitor. Please consult the table below for the selection criteria for power cords used in the United States and Canada. Cord Type SJT SVT Size of Conductors in Cord Maximum Current Rating of Unit 18 AWG 16 AWG 14 AWG 18 AWG 17 AWG 10 Amps 12 Amps 12 Amps 10 Amps 12 Amps FCC Compliance Statement This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna. Increase the separation between the LCD Monitor and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Westinghouse Service Center or an experienced radio/Monitor technician for assistance. FCC Warning To assure continued FCC compliance, the user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is used, use only a shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by Westinghouse Digital will void the user's authority to operate this device. 2 Cleaning the HD Video Monitor · · MAKE SURE THE HD Monitor IS TURNED OFF NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. English To clean the screen: To clean the case: 1. Use a soft, dry cloth. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild nonabrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface. Disclaimer Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on the HD Monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or HD Monitor case. Westinghouse Digital will not be liable for damage resulting from the use of any ammonia or alcohol-based cleaners. 3 INSTALLATION Package Contents Your product package includes: · 37" Westinghouse HD Video Monitor · Remote Control (with batteries) · Power Cord · Quick Connect Guide · User's Manual · Component Video Cable (Green, Blue, Red) · Audio Cable (Red, White) English 4 Front View of the HD Video Monitor Use the buttons on the right side of the HD Monitor or on the remote control to display the On Screen Display (OSD). The OSD controls are defined in "OSD Functions" on page 12. English "IR" receiver and LED indicator Speakers Rear View of the HD Video Monitor Screws To Detach the Speaker from the Video Monitor 1. Turn off the monitor and unplug the power supply. 2. Detach red and black speaker wires from the monitor first, then from the speaker. 3. Remove screws from the upper corners of the speaker. 4. Remove 4 screws from the back of the base. 5. Gently remove the speaker from the base. 5 Side View of the HD Video Monitor English 1. Menu 2. Volume + / 3. OSD Selection 4. Input 5. Power Button / Turn OSD Menu ON/OFF Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu. Highlight a control while in the OSD Menu. Select Active Video Input or choose a selection while in the OSD MENU. Turn Power ON/OFF 6 Side View of the HD Video Monitor 1. DVI2 (Supports up to 1080i) Using a 20-pin DVI cable, connect to a computer or other device with a DVI output. 2. DVI2 Audio Input (Right / Left) Connect an external audio source to this jack. 3. S-Video Input Connect to an external video device such as a HD Digital cable/satellite receiver, VCR, DVD or video game system. 4. AV Video Input Connect to an external video device such as a VCR, DVD and video game system. 5. AV & S-Video Audio Input (Right / Left) Connect an external audio source to this jack; (Audio (R/L). This connection supports either S-Video or AV input. 6. Audio Output (Right / Left) Connect this output to an external audio receiver. 7. VGA Audio IN Using the cable provided, connect to the Audio out (Green) from a computer. 8. VGA Using a 15-pin VGA cable, connect to a computer or other device with a VGA output. 9. DVI1 Audio Input (Right / Left) Connect an external audio source to this jack. 10. DVI1 (Supports up to 1080p) Using a 20-pin DVI cable, connect to a computer or other device with a DVI output. 11. YPbPr1 Input Connect an external video device with component output to these jacks. 12. YPbPr2 Input Connect an external video device with component output to these jacks. 13. YPbPr1 Audio 1 Input (Left / Right) Connect an external audio source to this jack. 14. YPbPr2 Audio 2 Input (Left / Right) Connect an external audio source to this jack. 15. AC IN (Power) Connect the power cord from AC IN to a power source. English 7 Remote Control The Remote Control will transmit to the HD Monitor up to 10 feet away. English 1. POWER: Switch the power On/Off 2. INPUT Select input source 3. OSD SUB-MENU SELECTION Select OSD sub-menu option directly 4. PREVIOUS OSD MENU Select previous OSD menu 5. MENU/EXIT Turn OSD Menu On/Off. 6. SCALING Select Video Display format "STANDARD", "FILL", or "ZOOM" 7. / // OSD MENU control 8. Enter Execute a command 9. MUTE Turn the Sound On/Off 10. INFO Display the source and channel information 11. PIP Display sub-picture On/Off 12. FREEZE Freeze main screen 13. VOL - / + Volume Up/Down adjustment 14. SOURCE / Source selection Up/Down adjustment 15. YPbPr Select YPbPr1 / YPbPr2 source input 16. VGA Select VGA source input 17. DVI Select DVI1 / DVI2 source input 18. S-Video Select S-Video source input 19. AV Select AV source input 8 Installation 1. Insert Remote Control Batteries English 1) Remove the battery cover. 2) Insert the batteries corresponding to the (+) and (-) marks on the battery compartment. 3) Re-attach the battery cover. CAUTION: · Only use AAA batteries. · Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. · Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a fire risk or lead to personal injury. · Dispose of used batteries in accordance with local laws and regulations. · Keep batteries away from children and pets. · When the remote control will not to be used for an extended period, remove the batteries. 9 2. Connect audio and video cables to a PC Connect one or all of the following into the back of the HD Monitor IMPORTANT: Before beginning, make sure all devices are turned off. VGA CONN ...