User manual WESTINGHOUSE MT10 FLIP - INSTALL GUIDE

Installation & Assembly - Under Cabinet Swivel Mount for LCD TVs This product is intended for use with 10" to 15" LCD TVs weighing up to 10 lb and VESA® 75 and VESA® 100 mounting patterens Model: MT10 FLIP Max Load 10 lb (4.5 kg) IMPORTANT! Read entire instruction sheet before you start assembly and installation. Important, read before installation: In order to locate the mount completely under the cabinet, the cabinet depth should be at least 1.5" more than the height of the TV. This depth may be more depending on the width and shape of your TV. As an alternative means of mounting, the mount can still be fastened when it is extended 2" past the front of the mounting surface which will add 2" of depth to your cabinet. PART LIST Part # A 090-0238 B 095-4101 C 520-2027 D 520-2099 E 540-9443 F 520-2100 G 540-9465 H 560-1134 I 540-9442 J 590-1122 K 520-2005 L 540-9447 M 504-2013 N 590-5003 O 504-2014 Some parts may QTY. DESCRIPTION 1 LCD assembly 1 adapter plate 4 M4 x .7 x 10 mm phillips screw 4 10-32 x 1.25" phillips screw 4 .219 x .5 x .25 nylon spacer 4 10-32 x 2" phillips screw 4 .219 x .5 x .88 nylon spacer 3 cord clip 8 #10 SAE washer 1 2' helical wire wrap 4 M5 x .8 x 10 mm phillips 4 1/4 split washer 4 M4 x 12 mm phillips screw 4 .198 x .313 x .437 retaining spacer 4 M4 x 20 mm phillips screw not appear exactly as illustrated. C D A B J H G F I 1 of 5 Visit the Westinghouse Web Site at www.westinghousedigital.com M E K O L N ISSUED: 04-16-04 SHEET #: 090-9101-1 For customer service call 1-866-287-5555. Remove cord cover from LCD assembly (A). Cord Cover A This product is designed to accommodate screens with VESA® compliant hole pattern. For safe mounting, please make sure that mounting screws turn at least three complete turns in the screen inserts. FOR VESA 75 MOUNTING PATTERN: 1.) Choose hole pattern indicated below. 2.) Attach adapter bracket (B) to back of monitor using four M4 x 10 mm screws (C) as indicated below. 3.) If hole pattern is in a pocket, attach adapter bracket (B) to back of monitor using four M4 x 20 mm screws (O) and four retaining spacers (N) as indicated below. FOR VESA 100 MOUNTING PATTERN: 1.) Choose hole pattern indicated below. 2.) Attach adapter bracket (B) to back of monitor using four M4 x 10 mm screws (C) as indicated below. Note: If you don't get three complete turns in the screen inserts, use four M4 x 12 mm screws (M) instead of four M4 x 10 mm screws (C). B For screens with a hole pattern in a pocket, spacers (N) go between adapter bracket (B) and screen. B Note: Screen may appear slightly different than illustrated 2 of 5 Visit the Westinghouse Web Site at www.westinghousedigital.com ISSUED: 04-16-04 SHEET #: 090-9101-1 For customer service call 1-866-287-5555. Locate the bracket in the slot so that the top of the TV does not touch the round cover or go above it when the tilt is in the open position as shown in figure 1. Place 1/4 split washer (L) on M5 screw (K) before #10 SAE washer (I) and fasten adapter plate (B) to LCD assembly (A) as shown in figure 2. Round Cover A I L K figure 1 B figure 2 Sample location: your screen may mount in a different location in the slot. Carefully hold the closed mount with the TV against the bottom of your cabinet. Make sure that there is enough clearance between the back of the TV and the wall to clear the back tab. Drill four 1/4" holes to match the drawing to the right. Back holes of A 6.00" CAUTION · We recommend taking the screen off the mount to affix the bracket to the cabinet, to avoid any damages to the screen. Fasten LCD Assembly (A) to cabinet using four 10-32 x 1.25" screws (D) four #10 SAE washers (I) and four 1/4" spacers (E). Get all four screws (D) started before tightening. Note: If cabinet underside has lip, use four 7/8" spacers (G) and four 10-32 x 2" screws (F) instead of screws (D) and spacers (E). This lowers LCD Assembly (A) by 7/8" to allow LCD Assembly (A) to open and close without obstruction. LCD assembly Back Tab 1.25" Wall TOP VIEW I D or F E or G 3 of 5 Visit the Westinghouse Web Site at www.westinghousedigital.com ISSUED: 04-16-04 SHEET #: 090-9101-1 For customer service call 1-866-287-5555. Reattach screen onto bracket using the same position determined in step 4. Wind helical wrap (J) around all cords from back of LCD TV, as shown. Place cord clips (H) as needed, to better manage cords, making sure that one clip is close enough to the hinge area to prevent cord from bunching up. Note: Make sure that cords come out right side of LCD assembly (A). H Right Side A J Place cord cover back onto LCD assembly (A), so that it is even with the bends on the side of the mount. Note: Make sure all slack is pulled out with mount fully open before replacing cord cover. Cord Cover 4 of 5 Visit the Westinghouse Web Site at www.westinghousedigital.com ISSUED: 04-16-04 SHEET #: 090-9101-1 For customer service call 1-866-287-5555. Limited Five-Year Warranty Westinghouse Digital Electronics warrants to original end-users of this Westinghouse television mounting product (the "Product") that the Product will be free from defects in material and workmanship, under normal use, for a period of five (5) years from the date of purchase by the original end-user, subject to the following terms and conditions: REPAIR OR REPLACEMENT ­ For a period of five (5) years from the original date of purchase, Westinghouse Digital Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product. Replacement parts and products will be warranted for either the remainder of the original warranty period or ninety (90) days from the date of delivery to the end-user, whichever occurs last. OBTAINING WARRANTY SERVICE ­ To obtain warranty services, you must either personally deliver or ship the Product to Westinghouse Digital Electronics, freight prepaid. Please call Westinghouse Digital Electronics at (866) 287-5555 to obtain a Return Merchandise Authorization ("RMA") and for other instructions regarding return and replacement or repair of the Product. Westinghouse Digital Electronics will not accept Products delivered to it without an RMA. EXCLUSIONS TO WARRANTY ­ This warranty does not cover damage caused by (a) service or repairs by anyone other than personnel authorized by Westinghouse Digital Electronics, (b) the failure to utilize proper packing when returning the product, (c) improper installation or the failure to follow Product instructions or warnings, or (d) misuse or accident, in transit or otherwise. PROOF OR ORIGINAL PURCHASE ­ A sales receipt, invoice, or other proof of purchase specifying the original date of purchase within the five (5) year warranty period must be presented to obtain warranty service. This warranty extends to the original purchaser and is not transferable. EITHER REPAIR OR REPLACEMENT IS YOUR EXCLUSIVE REMEDY UNDER THIS WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY LAW, WESTINGHOUSE DIGITAL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CLAIMED TO ARISE FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION AND SCOPE TO THE TERMS OF THIS WARRANTY. Some States do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from State to State. Westinghouse Digital Electronics, LLC 16257 East Gale Ave. City of Industry, California 91745 Tel: (626) 333-9677. 5 of 5 Visit the Westinghouse Web Site at www.westinghousedigital.com ISSUED: 04-16-04 SHEET #: 090-9101-1 For customer service call 1-866-287-5555. and Westinghouse are trademarks of Westinghouse Electric Corporation and are used under license.