Installation and Assembly To Wood Stud or Concrete - Flat Wall Mount with VESA® 200, 100, and 75 IMPORTANT! Read entire instruction sheet before you start installation and assembly. Max. Load Capacity 50 lb (22.7 kg) Model: MT50 THIN R Parts List DESCRIPTION A wall bracket B M4 x 10 mm phillips screw C M4 x 12 mm phillips screw D M4 x 20 mm phillips screw E retaining spacer F #10 x 1 1/2" wood screw G concrete anchor H rubber pad I screw isolation spacer QTY. 1 4 4 4 4 1 1 2 1 PART # 095-4195 520-2027 504-2013 504-2014 590-5003 500-2002 590-0097 590-1159 590-0112 B C D E A F G H I This product is designed to accommodate screens with VESA® compliant hole pattern. For safe mounting, please make sure that mounting screws turn at least three complete turns in the screen inserts. FOR VESA 75 MOUNTING PATTERN: 1) Choose hole pattern indicated to the right. 2) Attach wall bracket (A) to back of screen using four 10 mm screws (B) as indicated. 3) If hole pattern is in a pocket, attach wall bracket (A) to back of screen using four 20 mm screws (D) and four retaining spacers (E) as indicated below. A For screens with a hole pattern in a pocket, spacers (E) go between adapter bracket (A) and screens. FOR VESA 100 MOUNTING PATTERN: 1) Choose hole pattern indicated to the right. 2) Attach wall bracket (A) to back of screen using four M4 x 10 mm screws (B) as indicated. Note: If you don't get three complete turns in the screen inserts, use four M4 x 12 mm screws (C) instead of four M4 x 10 mm screws (B). A FOR VESA 200 MOUNTING PATTERN: 1) Choose hole pattern indicated to the right. 2) Attach wall bracket (A) to back of screen using four M4 x 10 mm screws (B) as indicated. Note: If you don't get three complete turns in the screen inserts, use four M4 x 12 mm screws (C) instead of four M4 x 10 mm screws (B). A Note: Screen may appear slightly different than illustrated. 1 of 4 Visit the Westinghouse Web Site at www.westinghousedigital.com ISSUED: 05-17-04 SHEET #: 095-9197-2 02-18-05 For customer service call 1-866-287-5555. Installation To Wood Stud Walls Use a stud finder to locate center of stud. Place screw isolation spacer (I) over wood screw (F). Screw #10 x 1 1/2" wood screw (F) into wall. Tighten the screw just until the isolation spacer contacts the drywall. Be carefull not to overtighten. WARNING · Tighten wood screw so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screw, greatly reducing its holding power. · Never tighten in excess of 80 in · lb (9 N.M.). · Make sure that mounting screws are anchored into the center of the stud. The use of an "edge to edge" stud finder is highly recommended. I F Installation to Concrete and Cinder Block Walls SO LID CO NC RE TE CI ND ER BL OC K WARNING · When installing wall mounts on cinder block, verify that you have a minimum of 1 5/8" of actual concrete surface in the 1/4" diameter hole to be used for the concrete anchors. It is suggested that a standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid breaking out the back of the hole when entering a void or cavity. Do not drill into mortar joints, which are brittle and will not provide a stable anchorage! G SO LID CO NC Drill one 1/4" (6 mm) dia. hole to a minimum depth of 2" (51 mm). Insert anchor (G) in hole flush with wall as shown. Place screw isolation spacer (I) over wood screw (F). Screw #10 x 1 1/2" wood screw (F) into anchor (G). Tighten screw until the isolation spacer contacts the wall. Do not overtighten screw. RE TE CI ND ER I F BL OC K WARNING · Tighten wood screw firmly, but do not overtighten. Overtightening can damage the screw, greatly reducing its holding power. · Never tighten in excess of 80 in · lb (9 N.M.). WARNING · Never use concrete expansion anchor for attachment of wall plate to concrete walls covered with a layer of plaster, drywall, or other finishing material. 2 of 4 Visit the Westinghouse Web Site at www.westinghousedigital.com CUTAWAY VIEW ISSUED: 05-17-04 SHEET #: 095-9197-2 02-18-05 For customer service call 1-866-287-5555. Place rubber pads (H) on back of wall bracket in the center of the bracket, and adjacent to the top and bottom edges. H Use keyhole slot on wall bracket (A) to hang LCD screen on #10 x 1 1/2" wood screw (F). WARNING · The screen and bracket may be too heavy and bulky for one person to handle safely. Two or more persons, or mechanical lifting equipment, should always be used to securely attach the screen to the wall bracket. Refer to your screen's owner's manual for additional installation instructions. F A Note: Refer to your TV owner's manual for additional instructions which may pertain to the positioning of your specific TV. 3 of 4 Visit the Westinghouse Web Site at www.westinghousedigital.com ISSUED: 05-17-04 SHEET #: 095-9197-2 02-18-05 For customer service call 1-866-287-5555. Limited Five-Year Warranty Westinghouse Digital Electronics warrants to original end-users of this Westinghouse television mounting product (the "Product") that the Product will be free from defects in material and workmanship, under normal use, for a period of five (5) years from the date of purchase by the original end-user, subject to the following terms and conditions: REPAIR OR REPLACEMENT ­ For a period of five (5) years from the original date of purchase, Westinghouse Digital Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product. Replacement parts and products will be warranted for either the remainder of the original warranty period or ninety (90) days from the date of delivery to the end-user, whichever occurs last. OBTAINING WARRANTY SERVICE ­ To obtain warranty services, you must either personally deliver or ship the Product to Westinghouse Digital Electronics, freight prepaid. Please call Westinghouse Digital Electronics at (866) 287-5555 to obtain a Return Merchandise Authorization ("RMA") and for other instructions regarding return and replacement or repair of the Product. Westinghouse Digital Electronics will not accept Products delivered to it without an RMA. EXCLUSIONS TO WARRANTY ­ This warranty does not cover damage caused by (a) service or repairs by anyone other than personnel authorized by Westinghouse Digital Electronics, (b) the failure to utilize proper packing when returning the product, (c) improper installation or the failure to follow Product instructions or warnings, or (d) misuse or accident, in transit or otherwise. PROOF OR ORIGINAL PURCHASE ­ A sales receipt, invoice, or other proof of purchase specifying the original date of purchase within the five (5) year warranty period must be presented to obtain warranty service. This warranty extends to the original purchaser and is not transferable. EITHER REPAIR OR REPLACEMENT IS YOUR EXCLUSIVE REMEDY UNDER THIS WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY LAW, WESTINGHOUSE DIGITAL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CLAIMED TO ARISE FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION AND SCOPE TO THE TERMS OF THIS WARRANTY. Some States do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from State to State. Westinghouse Digital Electronics, LLC 16257 East Gale Ave. City of Industry, California 91745 Tel: (626) 333-9677. 4 of 4 Visit the Westinghouse Web Site at www.westinghousedigital.com ISSUED: 05-17-04 SHEET #: 095-9197-2 02-18-05 For customer service call 1-866-287-5555. and Westinghouse are trademarks of Westinghouse Electric Corporation and are used under license. ...