User manual WESTINGHOUSE W32701

Westinghouse Digital 2004 27" Wide-Format LCD-TV User's Manual 27" Wide-Format LCD-TV User Manual Preface This manual is designed to assist you in setting up and using your LCD-TV. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission permission of Westinghouse Digital Electronics. Read and follow the Important Safety Instructions and FCC Statement located in the Appendix. Copyright 2003, 2004 Westinghouse Digital Electronics Viacom Inc. owns the Westinghouse brand. All Rights Reserved. Revised October 20, 2004 C 1 27" Wide-Format LCD-TV User Manual Table of Contents Introduction Features Installation Guide Unpacking Connections Planning Your Connections Antenna Connection Video Connections PC & Audio Output Connections Power Connection Using The Remote Programming TV Channels Enjoying Wide-Format Movies Reference Guide Connector Descriptions Push-Button Control Descriptions Remote Control Description Picture-in-Picture Description Display Menu Display TV Geometric Audio Miscellaneous Appendices Trouble-Shooting Specifications Wall Mounting Important Safety Instructions FCC Statement 3 3 4 4 5 6 7 7 8 10 10 11 11 13 13 15 16 20 21 23 24 25 26 27 28 28 30 32 33 35 2 27" Wide-Format LCD-TV User Manual Introduction Thank you and congratulations! This user guide is divided into two parts: an Installation Guide and a Reference Guide. The first time you setup and use this LCD-TV, please follow the instructions in the Installation Guide. To fully explore the abilities and individual features of this LCD-TV, a Reference Guide follows this Installation Guide. Features This LCD-TV is HD-ready and requires an external HD source device that is not included with this product. Features (typical): Cable-ready 181 channel NTSC TV tuner Built-in progressive scan de-interlacing 720p, 1080i, 480p, 480i, VGA and SVGA compatible PIP, a variety of picture-in-picture and multiple picture arrangements Stereo speakers (8W/channel) Wireless remote control with direct source buttons Thin timeless style, optional wall mount. Connectors (typical): VGA inputs 2 component Video: YPbPr(HD) inputs S-Video, Video and RF NTSC inputs 5 separate stereo audio inputs: 4+1 (AV+PC) 1 audio output for external 5.1 surround sound processor 1 subwoofer output for 2.1 sound Performance (typical): Best progressive HD (1280x720) native resolution. Wide 170 degree viewing angle Bright 500nit display High 500:1 contrast Fast 16ms response time Outstanding 75% NTSC color gamut 3 27" Wide-Format LCD-TV User Manual Installation Guide You will soon be enjoying your LCD-TV. The following are instructions on what parts to expect to find within the box, how to connect your LCD-TV and how to use your remote to setup and configure basic options. Unpacking Carefully remove the LCD-TV and other contents from the box. Place the LCD-TV in a safe upright position with easy access to the connectors located on the rear of the display. Please confirm the following list of items is included: LCD-TV Remote control 2 AAA batteries AC Power cord VGA cable (analog RGB). AV cable. (The Yellow connector is for video, the white connector is for left audio channel and the red connector is for the right audio channel.) Documentation Westinghouse Digital 2004 27" Wide-Format LCD-TV User's Manual 4 27" Wide-Format LCD-TV User Manual Connections There are 4 separate locations for connectors on the rear of the LCD-TV: Antenna, Video, PC and Power. Menu Function Channel Function Channel Adjust Volume Source Adjust Volume Key Pad Scart (Euro Region) PC RGB(Analog) Y Pb Pr PC Audio Input Audio Output(L/R) Subwoofer Output 1 Y Pb Pr 2 R L S-Video R L R L Video R L PC Connectors Video Connectors Dust Cover Dust Cover Tuner Antenna 5 Power 27" Wide-Format LCD-TV User Manual There are two user accessible covers that can be removed (without tools) by gently squeezing the plastic clip. Carefully remove both covers to expose the PC and AV connections. Replace these covers as desired. Planning Your Connections Below is a table of some common configurations that may help you to determine how best to connect your particular devices. LCD-TV Good Better HD Cable or Satellite Receiver Best Your devices VGA in PC YPbPr1 in YPbPr2 in S-Video in Video in Tuner in DVD Cable or Satellite Game console VCR Progressive DVD Game console HD Cable or Satellite Receiver DVD Recorder Game console VCR Antenna Antenna Audio Out Subwoofer Out Subwoofer Surround Sound 6 27" Wide-Format LCD-TV User Manual To share an input or reduce the number of wires to the display, use a VCR or A Receiver to V consolidate connections. It is common to route the output of your camcorder, cable box (STB), satellite receiver (IRD) and personal video recorder (PVR) through your VCR for recording, editing and time shifting. Not all devices are the same and many may need additional cables, adapters and setup. In particular, computers, game consoles, high-definition receivers and progressive DVD players must be set to 16:9 output accordingly. Antenna Connection This LCD-TV has a built-in cable-ready NTSC tuner for analog cable and NTSC broadcast signals. You may choose to connect the analog cable or TV antenna wire (not included) directly to this LCD-TV antenna input. Tuner Video Connections There are four types of video inputs: YPbPr1, YPbPr2, S-Video and Video. Each of these video inputs has a corresponding set of stereo left and right audio inputs. These connectors are color-coded to match the colors of the corresponding connectors on other devices and cables. The YPbPr1 and YPbPr2 inputs will only accept 480i, 480p, 1080i and 720p signals. Use this to connect high definition devices such as a terrestrial HDTV receiver, HD satellite box, HD cable box or progressive scan DVD player. Use this to obtain better color performance from devices such as a DVD player. The built-in progressive scan logic will automatically convert interlaced DVD to non-interlaced. The S-Video and Video inputs are provided for use with devices such as a VCR, satellite receiver, digital cable box, or game console. The built-in progressive scan logic will also automatically convert these interlaced NTSC signals to non-interlaced. 7 27" Wide-Format LCD-TV User Manual HDTV receiver DVD player OUT AUDIO VIDEO VIDEO OUT AUDIO L R Pr Pb Y Y Pb Pr R L (Green) (Green) Y (Blue) Y (Blue) Pb (Red) Pb (Red) Pr 1 Pr 2 (Red) (Red) R (White) R (White) L S-Video R L L (Yellow) Video (Red) R (White) L R S-VIDEO L R L VIDEO AUDIO AUDIO OUT VCR OUT Game console PC & Audio Output Connections There are two PC inputs: VGA and PC audio. There is also an audio output and a subwoofer output. The VGA input is an analog RGB interface with separate H & V sync signals. VGA is more commonly found on computers. Attach the LCD-TV to your computer using the included (blue color-coded) VGA cable. The PC audio cable is not included and must be purchased separately. For the VGA inputs, please remember to adjust your computer resolution to match the 1280x720 resolution of the 27" LCD-TV for best performance. An additional software driver may be required from your PC graphics chip vendor to obtain wide format resolution support. 8 27" Wide-Format LCD-TV User Manual The audio output is commonly used to connect to an external audio amplifier or surround sound processor. The subwoofer output is used to attach an external powered subwoofer. Remember to enable this feature from the Audio Menu of the LCD-TV. When the subwoofer software command is set to On, an internal crossover cuts off the low frequency signal to the built-in speakers. When the subwoofer software command is set to Off, the built-in speakers will output full range audio. PC RGB (Analog) PC Audio Input (White) (Red) Audio Output (L/R) Subwoofer Output IN AUDIO IN R L SW Connection jack for subwoofer with built-in amplifier. 9 27" Wide-Format LCD-TV User Manual Power Connection Attach the AC power cord to the LCD-TV and plug into an appropriate wall outlet. Power AC 110V Using The Remote Slide open the rear cover on the battery compartment and insert a fresh set of two AAA batteries. Replace the battery cover on the remote. Turn on the TV by pressing the POWER button. Adjust the volume using the volume up and down buttons, VOL+ and VOL-. Select a video source in two ways. You may select a source directly using one of the buttons at the bottom of your remote control: TV, S-VIDEO, AV, YPbPr1, YPbPr2 and PC. Or you may scroll through a list of video sources using the SOURCE button located on top of the LCD-TV. TV or CVBS YPbPr2 S-VIDEO YPbPr1 VGA 10 27" Wide-Format LCD-TV User Manual Programming TV Channels Press the MENU button at the center of the remote. The command to automatically scan for program channels is located in the TV menu and labeled CH-SCAN. You can now watch TV. Change channels by pressing the channel up and down buttons CH CH . and TV CCD OFF + V-CHIP CHANGE PASSWORD CH SCAN CATV / AIR CH ADD/DEL CABLE + 22 TV CCD V-CHIP CHANGE PASSWORD CH SCAN CATV / AIR CH ADD/DEL CABLE + OFF Enjoying Wide-Format Movies As NTSC transitions to HDTV, you may experience a variety of content presented in different aspect ratios. This LCD-TV can scale the incoming video while maintaining the original aspect ratio or stretch the video to use the entire screen. Use the SCALING button on the remote control to switch the aspect ratio as indicated here: Use FILL ALL to stretch programs to occupy more of the screen. Use FILL ALL to view wide format (anamorphic) DVD movies. In particular, look for DVD movies that are labeled: "Anamorphic Widescreen" or "Enhanced for 16:9 TV" to obtain better performance. Use 4:3 MODE to maintain the correct original aspect ratio for most videotape, broadcast television, cable, satellite, HDTV and PC content. The unused portions on the left and right or top and bottom edges of the screen will appear black. 11 27" Wide-Format LCD-TV User Manual Note: Plasma users are often advised to use FILL ALL to stretch all content to the edges of the screen in order to reduce burn-in. This LCD-TV has no such problem with burn-in. Use PANORAMIC to expand NORMAL 4:3 aspect ratio content horizontally using a creative non-linear formula. Objects in the middle maintain the original aspect ratio and only the two sides are expanded. Experiment with these SCALING settings to determine your personal preferences. Use WIDE to expand letterbox content to occupy more of the screen. Occasionally, you may find a TV program or older DVD movie that is actually presented as letterbox format within an NTSC signal. Use this mode to zoom the image up to full screen. The unused portions on the top and bottom of the screen will appear black. Note: In WIDE mode, non-letterbox content will enlarge beyond the boundaries of the screen. Some portions of the video will not be visible above and below the screen. This may include OSD information from you DVD player, cable decoder or satellite receiver. To see the entire screen, switch to a different SCALING mode. 4:3 MODE FILL ALL WIDE 4:3 MODE PANORAMIC 12 27" Wide-Format LCD-TV User Manual Reference Guide Use this section of the user manual to learn about individual features and functions of this LCD-TV. Learn the purpose of each connector on the back panel. Learn to use each control button on the LCD-TV and remote control. Learn how to use the software features that appear in a menu displayed on-screen. Connector Descriptions There are 4 sets of color-coded connectors on the rear of the LCD-TV: Power; PC inputs and audio outputs; video inputs; and antenna input. Antenna input Connector Tuner Input Color Code Silver Description 75ohm coaxial cable with F-type connector. Attach your TV antenna or analog cable service here. PC inputs & audio output Connectors PC RGB (analog) PC Audio Input Audio Output Subwoofer Output Color Code Blue Description Use the included VGA cable to use this LCD-TV as a personal computer monitor. Use this miniature stereo input to attach to your computer audio output. Use these 2 RCA jacks to provide audio to an external amplifier or surround sound decoder. Use these 2 RCA jacks to provide audio to an external powered subwoofer. Green White, Red White, Red 13 27" Wide-Format LCD-TV User Manual Video Connectors Color Code Description YPbPr1 Input Y Pb Pr Right audio Left audio Green Blue Red Red White 5 RCA jacks. Use this set of component video connectors to attach a high-definition HDTV receiver that can output 480p, 1080i or 720p format. May also be used to attach a progressive scan DVD player. YPbPr2 Input Y Pb Pr Right audio Left audio Green Blue Red Red White 5 RCA jacks. Use this set of component video connectors to attach a high-definition HDTV receiver that can output 480p, 1080i or 720p format. May also be used to attach a progressive scan DVD player. S-Video Input Right audio Left audio Video Input Right audio Left audio Black Red White Yellow Red White 1 DIN, 2 RCA jacks. S-Video is superior to Composite Video but not as good as YPbPr or RGB video. 3 RCA jacks. Use the included composite video cable to attach a popular device such as a VCR or game console. Power Connector Color Code Description Use the included power cord to attach to an appropriate AC wall outlet. 100-240VAC, 50-60Hz, 1.8A Power Input Black 14 27" Wide-Format LCD-TV User Manual Push-Button Control Descriptions The power button is located separately on the front lower right of the display. Button Description Use this button to switch the LCD-TV between on and standby modes. The power indicator will glow green when the power is on. POWER The power indicator will glow red when the LCD-TV is in standby. The power indicator will not glow if the power cord is unplugged. The MENU, CHANNEL, VOLUME and SOURCE buttons are conveniently located on the top of the LCD-TV. 15 27" Wide-Format LCD-TV User Manual Remote Control Description The remote control uses 2 AAA (1.5VDC) batteries. The buttons are grouped in 4 categories: Power & Mute Buttons Picture-in-Picture Buttons Audio & Video Adjustment Buttons Volume & Channel Control Buttons The index number corresponds to the callout number for each button depicted in the illustration. Power & Mute Buttons 2 1 Index Description Use this button to switch the LCD-TV between on and standby modes. The power indicator will glow green when the power is on. The power indicator will glow red when the LCD-TV is in standby. The power indicator will not glow if the power cord is unplugged. 1 POWER 2 MUTE Use this button to toggle audio on and off. 16 27" Wide-Format LCD-TV User Manual 4 Index 3 6 7 5 Picture-inPicture Buttons Description Use this button to activate and adjust Picture-in-Picture 3 PIP features in conjunction with SOURCE, SWAP, PIPSIZE and PIP-POS. (See also Picture-in-Picture Description.) 4 5 6 7 PIP-SRC SWAP PIP-SIZE PIP-POS Use this button to change the small picture's signal source. Use this to exchange the two PIP video sources. Use this to change the size of the small video window. Use this to move the position of the small video window. 17 27" Wide-Format LCD-TV User Manual Audio & Video Adjustment Buttons Index 8 Description 9 10 11 13 12 14 Use this button to adjust aspect ratio and to fill the screen. 8 SCALING Use FILL ALL for HD content. Use 4:3 MODE for 4:3 content. Use PANARAMIC to stretch 4:3 content to full screen. Use WIDE for letterboxed content. Use this button with the two arrow buttons to select among stereo, mono and the secondary audio program (SAP). Use this button to hold a particular image on screen. This may be useful in making fine color adjustments. Use this button to turn on and off closed caption display. Use this button to scroll through the video input sources: TV, AV, S-VIDEO, YPbPr1, YPbPr2, and VGA. Use the MENU button and 4 arrow keys to traverse and adjust the software features. Press the MENU button again to exit. The SLEEP feature is used to automatically shut off this LCD-TV after a preset period of time has passed. Press the SLEEP button repeatedly to select 0, 30, 60, 90 or 120 minutes. Selecting 0 turns the SLEEP feature off. 9 AUDIO 10 FREEZE 11 CAPTION 12 SOURCE 13 MENU 14 SLEEP 18 27" Wide-Format LCD-TV User Manual Volume & Channel Control Buttons VOL+- Index Description 15 Use VOL+ and VOL- keys to adjust the audio louder and quieter. 16 CH Use the CH and CH keys to surf forwards and backwards between pre-programmed TV channels. Press 0-9 to select channels from 01 to 125. If you 15 17 17 0-9 want to select the channel 123, you just press the "1", "2", "3" buttons in proper order. 19 18 20 16 18 R (RETURN) CH TV, S-VIDEO, AV, YPbPr1, YPbPr2, PC Use the R button to return to the previous channel. Use the CH button to display the current channel information on the LCD-TV screen. 21 19 20 Use these buttons to switch directly to a video source. 21 INFO Use the INFO button to display the current signal status. 19 27" Wide-Format LCD-TV User Manual Picture-in-Picture Description Main picture mode 1.You can change the signal source of the main picture through the MAIN MODE of your remote control. The signal source you choose appears on the upper left corner of the screen (diagram 1). 2.The main picture will be changed in the sequence as follows: TV/CVBS(AV)/S-VIDEO/SCART (for Europe only)/YPbPr1/YPbPr2 or D4 (for Japan only)/VGA. 3.Users are allowed to set the options specifically designed for a certain mode under the OSD MENU. PIP mode 1.LCD display can display the main signal and auxiliary visual input signals simultaneously. The auxiliary signal (or input source) appears in a frame on the main picture. This is known as PIP picture (diagram 1). To activate PIP mode from the PIP button on the remote controller. 2.Please select the PIP input source from the SOURCE button on the remote controller. There is no PIP button on the LCD display control panel. 3.The sub-signal options change as the main signal source changes. (Diagram 2) The signal source Main signal Sub signal Channel & Audio mode 1. TV 2. OFF VGA YPbPr1 YPbPr2 CHANNEL NO. : 25 SAP Sub signal Main signal (Diagram 1) Sub signal (PIP) Main signal OFF TV AV CVBS SV (S-VIDEO) SCART (For Europe only) YPbPr1 YPbPr2 D4 VGA ( PC ) (For Japan only) TV CVBS(AV S-VIDEO SCART (For Europe only) YPbPr2 D4 YPbPr1 YPbPr2 D4 (For Japan only) VGA (PC) YPbPr2 D4 (Diagram 2) 20 27" Wide-Format LCD-TV User Manual Display Menu 1. Users can use either the MAIN MODE button or the quick selection button on the remote control to select the proper mode. Once the signal source is detected, the system mode selected by users appears on the upper left corner of the screen. 2. After the system mode is selected, users can press MENU buttons to execute the following functions: AUTO (automatic adjustment) (can be used under PC mode) Allows you to adjustment the setup of picture automatically. DISPLAY (picture display) Provides more picture modes and functions based upon your favorite programs and lets you adjust the setup regarding colors and brightness. TV (to be used under TV mode) Allow you to set your favorite channels. If you use several systems and input signal sources, this function executes the automatic programs. GEOMETRIC (geometric adjustment) (to be used under PC mode) Allows you to adjust the position and sharpness of picture. AUDIO (audio setup) Provides more audio selections. You can also set the audio environment for your LCD display. MISCELLANEOUS (other setups) Provides several options and allows you to set the automatic closing hour, language, and restore the default. 21 27" Wide-Format LCD-TV User Manual Items DISPLAY CONTRAST BRIGHTNESS COLOR-TEMP RED GREEN BLUE WHITE BALANCE COLOR HUE SHARPNESS FOCUS NOISE FILTER RESET< / > 0 0 0 0 50 50 6 31 0 0 50 50 Range Activation mode TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC PC PC PC PC PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4 TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4 TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4 YPbPr1/YPbPr2/SCART/D4 TV/S-VIDEO/AV/SCART TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC High / Middle / Low / User 0 0 0 255 255 255 ON / OFF TV CCD V-CHIP CHANGE PASSWORD CH SCAN CATV / AIR CH ADD / DEL CC1~CC4 / T1~T4 / OFF TV/AV ( For NTSC) TV/S-VIDEO/AV ( For NTSC) 0000 0 125 9999 TV/S-VIDEO/AV ( For NTSC) TV TV ( For NTSC) TV ( For NTSC) ANTENNA / CABLE +/0 0 0 0 255 31 255 255 GEOMETRIC CLOCK PHASE H-POSITION V-POSITION RESET< / > PC PC PC PC PC AUDIO VOLUME BASS TREBLE SUBWOOFER SURROUND BALANCE RESET< / > 0 0 0 31 24 24 TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC R TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC ON / OFF ON / OFF L 0 MISCELLANEOUS OSD TIMER LANGUAGE PIP SIZE PIP POSITION RESET< / > 5/10/15/20/25/30 SEC ENGLISH/DEUTESH/FRANCOIS/ ITALIA NO/ESP ANOL/JAPAN TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC TV/S-VIDEO/AV/YPbPr1/YPbPr2/SCART/D4/PC 1, 2, 3, 4, 5 0 4 Menu is changed as the picture mode and district are changed. 22 27" Wide-Format LCD-TV User Manual Display 1. Press MENU button on the remote controller to display the main menu. 2. Press 3. Press 4. Press button on the remote controller to select the Display to be adjusted. button on the remote controller to select the item to be adjusted. button on the remote controller to adjust the default of that item. 5. Press MENU again to quit the picture. Menu DISPLAY CONTRAST BRIGHTNESS COLOR HUE SHARPNESS NOISE FILTER RESET < / > OFF 42 28 25 25 4 Descriptions Press to increase or decrease the picture contrast . Press to make picture brighter or darker. Contrast Brightness Color Temp Press to select color temps. For TV/S-VIDEO/AV/SCART Red Press to increase or decrease the red of the picture. Press to increase or decrease the green of the picture. Press to increase or decrease the blue of the picture. Green DISPLAY CONTRAST BRIGHTNESS COLOR-TEMP RED GREEN BLUE WHITE BALANCE RESET < / > USER 128 128 128 43 49 Blue In the PC Mode, select all white for the White Balance center ofpicture; and then press to make the color balanced. Color Press to increase or decrease the thickness of color. Press to change the colors to be redder or greener. Press softer. to make the picture sharper or For PC Hue Sharpness DISPLAY CONTRAST BRIGHTNESS COLOR HUE SHARPNESS FOCUS RESET < / > 42 35 46 27 4 15 Noise Filter Press to choose on or off to make the picture more clear. Press softer. to make the signal sharper or Focus Reset< / > Press this button to restore all setups of the Display to the default. For YPbPr1/YPbPr2/D4 23 27" Wide-Format LCD-TV User Manual TV TV CCD V-CHIP CHANGE PASSWORD CH SCAN CATV / AIR CH ADD/DEL CABLE + OFF 1. Press MENU button on the remote controller to display the main menu. 2. Press button on the remote controller to select the main item (TV) to be adjusted. 3. Press button on the remote controller to adjust the setup of that item. 4. Press button on the remote controller to adjust the default of that item. 5. Press MENU button again to quit the picture. Descriptions CCD (This function is designed for American NTSC system only) Use this function to activate the subtitle function. V-CHIP (grading system) (This function is designed for American NTSC system only) Enter password to activate the MENU of V-CHIP. You can press button to select the grade you want; and then press button to set up if you'd like to watch the programs. (Please refer to Table 1 and Table 2 as follows) Change Password (change the password for grading)(This function is designed for American NTSC system only) Press button and enter the original password (defaulted as 0000). You'll see the New Password picture. Enter the password you choose and quit. CH Scan (automatic channel scanning) At CH Scan, press button to execute the automatic channel scanning. You need to execute the automatic channel scanning if you install your LCD display for the first time. CATV / AIR (TV signal source) Antenna Cable Press button on the remote controller to select the item you'd like to use. Cable please set this item if you receive programs through CA TV. Antenna please set this item if you receive programs through antenna. CH ADD/DEL Press button on the remote controller to select the item you'd like to +(ADD) / - (DEL) the channel. TV RATING V-CHIP MPAA-RATING G U PG U FV U PG-13 U R U NC-17 U L U U U X U D U U Y7 PG 14 MA FV D L S V suitable for older kids parental guidance required parents should be aware if the programs are suitable for children adults only fantasy and violence some sexual content and dialogue low level of content and profanity Sex Violence TV-RATING V S U U U U U U TV-Y7 TV-PG TV-14 TV-MA (Table 1) MAPP RATING B prohibited (not allowed to watch this program) U not prohibited (allowed to watch this program) suitable for children and average audience G parental guidance required PG PG-13 suitable for kids less than 13 years under parental supervision rated, children under 17 should be R accompanied by parents NC-17 children under 17 are not allowed X former grading, has merged with NC-17, but can be seen in older movies. 24 27" Wide-Format LCD-TV User Manual Geometric GEOMETRIC CLOCK PHASE H-POSITION V-POSITION RESET < / > 127 11 125 30 1. Press MENU button on the remote controller to display the main menu. 2. Press 3. Press 4. Press button on the remote controller to select the main item (Geometric) to be adjusted. button on the remote controller to select the item you'd like to adjust. button on the remote controller to adjust the default of that item. 5. Press MENU button again to quit the picture. Menu Descriptions Clock Press button to adjust the alignment of VGA for steady display of VGA. Press button to adjust the focus and sharpness of VGA. Phase H-Position Press button to adjust the horizontal position of VGA. V-Position Press button to adjust the vertical position of VGA. Reset< / > Press this button to restore all Geometric setups to default. 25 27" Wide-Format LCD-TV User Manual Audio AUDIO VOLUME BASS TREBLE SUBWOOFER SURROUND BALANCE RESET < / > L OFF OFF 0 R 11 12 12 1. Press the MENU button on the remote controller to display the main menu. 2. Press button on the remote controller to select the main item (Audio) to be adjusted. 3. Press button on the remote controller to select the item to be adjusted. 4. Press button on the remote controller to adjust the default of that item. 5. Press MENU button again to quit the picture. Menu Descriptions Volume Bass Treble Subwoofer Surround Balance Reset< / > Press Press Press button and adjust the volume to the level you want. button to increase or decrease the volume. button to increase or decrease the volume of pitch sound. Press ON or OFF to activate or inactivate the subwoofer filter. Press ON or OFF to activate or inactivate the surround sound effect. Press button to adjust the balance between right and left speakers. Return all Audio items to default by pushing the left or right arrow keys. 26 27" Wide-Format LCD-TV User Manual Miscellaneous MISCELLANEOUS OSD TIMER LANGUAGE PIP SIZE PIP POSITION RESET < / > 30 SEC English 1 0 1. Press the MENU button on the remote controller to display main menu. 2. Press button on the remote controller to display the main item (Miscellaneous) to adjust. 3. Press button on the remote controller to select the item to be adjusted. 4. Press button on the remote controller to adjust the default of that item. 5. Press MENU again to quit the picture. Menu Descriptions OSD Timer Language PIP Size PIP Position Reset< / > Press 5 sec button to select the time to be shown on the menu 15 sec 20 sec 25 sec 30 sec Press button to select language English/French/Spanish/German/ Italian/Japanese/Chinese(Traditional)/Chinese(Simplified) Press button to select the size of small picture. (5 size) (Please execute this function under PIP Mode) Press button to move the small to upper left, upper right, center, lower left, or lower right.(Please execute this function under PIP Mode) Return all Miscellaneous items to default. 27 27" Wide-Format LCD-TV User Manual Appendices Trouble-Shooting