5 Parts-list Introduction ..................................................................................................................... 5-3 5-4 5-5 5-6 5-7 5-8 5-9 5-10 5-11 5-12 5-13 5-14 5-15 5-16 5-17 5-18 5-19 5-20 5-21 5-22 5-23 5-24 5-25 5-26 Covers PL 1.1 Covers ................................................................................................................. Paper Trays PL 2.1 Paper Tray (A3/Ledger) ....................................................................................... PL 2.2 Paper Tray (A4/Letter) ......................................................................................... Paper Feeder PL 3.1 Paper Feeder....................................................................................................... MBF Assembly PL 4.1 MBF Assembly..................................................................................................... PL 4.2 Paper Handler...................................................................................................... Paper Transport PL 5.1 Paper Transport................................................................................................... Exit Assembly Fuser PL 6.1 Rear Cover Assembly.......................................................................................... PL 6.2 Fuser.................................................................................................................... Frame Drives PL 7.1 Frame & Drives .................................................................................................... Xerographics PL 8.1 Xerographics........................................................................................................ Electrical PL 9.1 Electrical .............................................................................................................. PL 9.2 Electrical .............................................................................................................. Offsetting Catch Tray PL 10.1 Offsetting Catch Tray (1 of 2) ............................................................................ PL 10.2 Offsetting Catch Tray (2 of 2) ............................................................................ Optional Feeder 1 PL 11.1 500 Sheet Feeder (1 of 3).................................................................................. PL 11.2 500 Sheet Feeder (2 of 3).................................................................................. PL 11.3 500 Sheet Feeder (3 of 3).................................................................................. High Capacity Feeder PL 12.1 2000 Sheet Feeder (1 of 4)................................................................................ PL 12.2 2000 Sheet Feeder (2 of 4)................................................................................ PL 12.3 2000 Sheet Feeder (3 of 4)................................................................................ PL 12.4 2000 Sheet Feeder (4 of 4)................................................................................ Duplex PL 13.1 Duplex................................................................................................................ Initial Issue DocuPrint N2025/N2825 02/2000 5-1 Parts-list EDNord - Istedgade 37A, 9000 Aalborg - Telefon 9633 3500 Parts-list 02/2000 5-2 Initial Issue DocuPrint N2025/N2825 EDNord - Istedgade 37A, 9000 Aalborg - Telefon 9633 3500 Introduction Overview The Parts List section provides exploded view illustrations of all spared subsystem components and a listing of the corresponding part numbers. The illustrations show the relationships between parts. 5. The notation "with X~Y" following an part name indicates an assembly that is made up of components X through Y. For example, "1 (with 2~4)" means part 1 consists of part 2, part 3, and part 4. The notation "RS" means that the part is a requested spare. Part numbers for these parts will be provided as soon as they are available. An asterisk * following a part name indicates the page contains a note about this part. The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that connector jack 1 is attached to one end of the wire harness and connector jack 2 is attached to the other end that is plugged into plug 2. A notation "(part of item 1.1)" indicates that the part is included with item 1.2.1 (PL1.2, line item 1). 6. 7. 8. Organization of this Section The following elements make up the Parts List section:Parts Lists (PL)Each item number in the part numbers listing corresponds to an item number in the illustration. All the parts in a given subsystem of the machine will be located in the same illustration or in a series of associated illustrations. The parts which are not spared are indicated by "- -" in the Part column. Exploded View IllustrationsAn item that is called out on an illustration has a corresponding listing within this section.Components are given item numbers that correspond to the part number listings. Hardware items are lettered. All hardware dimensions are in millimeters unless otherwise noted. Assemblies and kits are a combination of several separate components. A bracket is used on the illustration when an assembly or kit is spared but is not shown. The item number of the assembly or kit precedes the bracket; the item numbers of the piece parts follow it.Part Number IndexThis index lists all the spared parts in the system in numerical order. Each number is followed by a reference to the parts list on which the part may be found. Other InformationAbbreviationsAbbreviations which may be used in the parts lists text or illustrations are as follows:US ------ United States Parts Distribution SystemXE ------ European Parts Distribution SystemAO ------ South America Parts Distribution SystemXCL ------ Canada Parts Distribution SystemP/J ------ Plug/Jack P/O ------ Part ofW/ ------ WithW/O -----WithoutTagA Tag is used when a part or area of the system has been modified. The Change Tag Index, which is found in the General Procedures/Information Section, lists the name and purpose of the Tag. In some cases, you will go to the parts lists and find a part number listed as "with Tag." Go to the Change Tag Index for a description of what the Tag is and what you need to install the Tag. The Change Tag Index will either list a kit number or indicate "piece part." If "piece part" is indicated, the parts lists reference(s) will be given and all parts associated with the Tag will have to be individually located, ordered, and installed.The notation "P/O Tag" after a part number indicates that the item is part of a Tag. The notation "Tag" after a part number will be used only to indicate the entire Tag, whether that is a kit number or an individual part.Whenever you install a Tag kit or all the piece parts that make up a Tag, mark the appropriate number on the Tag matrix. 9. Using the Parts List 1. 2. The numbers shown in each illustration correspond to the parts list number for that illustration. Throughout this manual, parts are identified by the prefix "PL", followed by a number, a decimal point, and another number. For example, PL3.1.12 means the part is item 12 of parts list 3.1. The capital letters "C", "E", and "S" shown in an illustration stand for C-ring, E-ring, and Screw, respectively. A shaded triangle t in an illustration indicates the item is part of an assembly. 3. 4. Initial Issue DocuPrint N2025/N2825 02/2000 5-3 Parts-list Introduction EDNord - Istedgade 37A, 9000 Aalborg - Telefon 9633 3500 PL 1.1 Covers Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part 48K75876 ----3E46230 ----48E64291 48E64082 ----3E46240 ------------------------50E88420 101K31281 48E64122 ----48E64102 892E08620 892E08640 892E08660 --------802K04213 --------892E08500 600K76430 Description Top Cover Assembly (includes 215, 21, 22) Top Cover Stopper (left) Bracket (left) Top Cover Cap Left Cover Bracket (right) Stopper (right) Top Cover Latch (right) Latch (left) Tray Guide (right) Tray Guide (left) Tray Extension Tray Stopper Control Panel Assembly Right Cover Front Cover Lower Left Cover Control Panel Overlay (US) Control Panel Overlay (Port.) Control Panel Overlay English Label Front Label Front Cover Assembly (with 18, 22) Access Cover Label 3 Cover Pop Up Stand Badge Hardware Kit (includes Screw) 21 22 23 24 25 26 S Parts-list PL 1.1 02/2000 5-4 Initial Issue DocuPrint N2025/N2825 EDNord - Istedgade 37A, 9000 Aalborg - Telefon 9633 3500 PL 2.1 Paper Tray (A3/Ledger) Item 1 Part 109R00484 --------------------------------------------------------------------------------------------------------------------------------802K05701 ----------------600K76430 Description Tray Assembly (A3/Ledger) (includes 2-28) Tray Assembly A3/Ledger Bottom Latch Spring Side Guide Plate (left) Side Guide Plate (right) Side Lever (right) Latch Assembly (right) Spring Long Ground Spring End Guide Plate End Guide Spring End Plate Guide Tray 1 Long Housing Rack Pinion Bottom Cover (Long) Sector Gear (Long) Idler Gear End Guide Lock Tray 1 Cover Size Cam (Long) Pin Lock Long Side Label Max Paper Label Hold Here Label Paper Set Label Latch Tray Set Label Side Cap (right) Latch Cover (right) Latch Cover (left) Latch Assembly (left) Tray Cover Assembly (with 20, 28) Mini Bottom Plate Rack (left) N/F Center Spring Tray Plate Hardware Kit (Includes Screw) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 S Initial Issue DocuPrint N2025/N2825 02/2000 5-5 Parts-list PL 2.1 EDNord - Istedgade 37A, 9000 Aalborg - Telefon 9633 3500 PL 2.2 Paper Tray (A4/Letter) Item 1 Part 109R00485 ----------------------------------------------------------------------------------------------------------------------------------------600K76430 Description Tray Assembly (Short) (includes 233) Tray Assembly A4/Letter Bottom Plate Assembly Latch Spring Side Guide Plate (left) Side Guide Plate (right) Side Lever (right) Latch Assembly (right) Spring Ground Spring End Guide Spring Plate End Guide End Plate Guide Tray 1 Short Housing Rack Pinion Bottom Cover (Short) Sector Gear (Short) Idler Gear End Guide Lock Size Cam (A4/Letter) Pin Lock Short Side Label Max Paper Label Set Paper Label Latch Latch Cover (right) Latch Cove (left) Latch Assembly (left) Side Cap (right) Handle Cover Mini Bottom Plate Rack (left) N/F Center Spring Tray Plate Hardware Kit (Includes Screw) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 S Parts-list PL 2.2 02/2000 5-6 Initial Issue DocuPrint N2025/N2825 EDNord - Istedgade 37A, 9000 Aalborg - Telefon 9633 3500 PL 3.1 Paper Feeder Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 E S Part 54K13043 ------------------------54K13055 ----------------19K94613 --------600K72189 ------------32K93788 --------110E98320 162K42630 ----130E82030 130E81970 --------------------600K76430 600K76430 Description Rear Chute Assembly (includes 24) Chute (Rear) Pinch Roll Pinch Spring Rod GG (P/O item 16) Collar GG (P/O item 16) Tray 1 Guide Assembly (with 5,6,16) Retard Chute Assembly (includes 9-15, 31, 32) Retard Chute (P/O item 8) Turn Roll Assembly (left) (P/O item 8) Bearing Support (P/O item 8) Bearing ES8 (P/O item 8) Retard Holder Assembly (P/O item 8) Retard Arm (P/O item 8) Turn Gear (left) (P/O item 8) Tray 1 Guide Assembly (right) (includes 5, 6 &17-19) Tray 1 Guide (right) (P/O item 16) GG Actuator GG Spring Tray 1 Guide Assembly (left) (includes 21-33) Tray 1 Guide (left) Size Actuator Paper Size Switch Sensor Harness Assembly (J20J201, J202) Low Paper Sensor Harness Assembly (J127-P128) MBF Home Switch MBF Actuator Tray 1 Low Paper Sensor Low Paper Actuator Low Paper Spring Retard Lever (P/O item 8) Release Spring (P/O item 8) Ground Clip Hardware Kit (Includes E-ring) Hardware Kit (Includes Screw) Initial Issue DocuPrint N2025/N2825 02/2000 5-7 Parts-list PL 3.1 EDNord - Istedgade 37A, 9000 Aalborg - Telefon 9633 3500 PL 4.1 MBF Assembly Item 1 Part 59K15221 Description MBF Assembly [includes 2, 5-11, 13-24 (PL 4.1), 2-5, 7-11, 13-16, 18-31 (PL 4.2)] Tray Assembly Latch Assembly (left) Upper Guide MBF Spring 1 Pick Up Gear Pick Up Cam Core Roll MBF Feed Roll (P/O item 26) Pick Up Shaft Bearing #8 Latch Assembly (right) Tray 1 Turn Roll Clutch Turn Roll Assembly -Tray 1 Bracket Tray 1 Pick Up Gear MBF Idle Gear 1 Tray 1 Core Roll Envelope Feed Roll (P/O item 27) Core Bearing #8 Spring Tray 1 Feed Roll MBF Turn Roll Shaft Label Gear Kit (includes 6, 16, 17 & PL 4.1B items 23, 24) Feed Roll Assembly Kit (contains 2) Envelope Feed Roll Kit (includes 2) Hardware Kit (Includes E-ring) Hardware Kit (Includes Screw) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 E S ----3K8552 ----809E15350 ------------------------3K85941 121K20060 59K13064 ----------------59K11 ...