Owner's Manual Mode d'emploi Bedienungsanleitung M YAMAHA CORPORATION Pro Audio & Digital Musical Instrument Division P.O. Box 3, Hamamatsu, 430-8651, Japan i Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. Installing the Software . . . . . . . . . . . . . . . 3 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing from a Macintosh Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing from a Windows 95 PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reinstalling the Regular 03D Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 6 7 2. About the Video Edit Suite Software . . . . 8 ESAM II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Video Edit Suite Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 System Hookup (audio only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Activating the TO EDITOR Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Functions that Cannot Be Used when the TO EDITOR Port is Active . . . 11 How it works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Operating Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3. Quick Start . . . . . . . . . . . . . . . . . . . . . . . . 13 4. Display Pages . . . . . . . . . . . . . . . . . . . . . 14 MIDI/HOST Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine Page (Cross Point Setting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CrossFade Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . From-To Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CH 1-16 & 17-24/Stin Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monitor Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Prefer. Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delay Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIDI Setup Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bulk Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solo Setup Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Moni. Setup Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Define Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EQ Library Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Effects Library Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 16 16 20 21 22 22 23 24 24 24 25 25 26 26 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Supported Editors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Supported Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 MIDI Bulk Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 03D Video Edit Suite Software--Owner's Manual 1 Introduction Introduction Welcome Thank you for purchasing the Yamaha 03D Video Edit Suite Software. With support for the ESAM II editor protocol, the 03D Video Edit Suite software turns the 03D Digital Mixing Console into a full-feature digital audio mixer for video post-pro. Features · · · · · Audio signals can be mixed and edited along with the video editing. With support for ESAM II, the 03D works like a video switcher for audio, allowing remote transition previews from a video editor. Several extended functions of the ESAM II protocol including remote fader level control have been employed. 03D data can be downloaded or uploaded to the video editor for centralized data management. Phase reverse, input delay up to approximately six frames (with 1/4 frame accuracy), 4-band parametric EQ, dynamics, and effects for flexible audio mixing and audio sweetening. The 03D does not require extra hardware, such as boards and ports. A 9-pin TO EDITOR port comes as standard. Channels can be assigned to the 03D's four bus outputs as FROM sources and TO sources, allowing for dissolve transitions. Crossfades can be performed using one of seven crossfade patterns, which can be set individually for each channel, and three curve slopes, which can be applied to all channels globally. The 03D's motorized faders allow for accurate level adjustments and precisely reflect input level settings. In FROM-TO mode, faders reflect transition levels. Preview sources can be selected for monitoring, and CHANNEL and BUS modes allow individual channel monitoring or bus monitoring. · · · · Package Contents The package should contain the following items. Make sure that you have them all. · · · 03D regular software (Mac and PC disks labeled "03D") 03D Video Edit Suite software (Mac and PC disks labeled "03D for Video Editing") This Owner's Manual Contact your Yamaha dealer if something is missing. Trademarks Accom is a trademark of Accom Corporation, Inc. Ampex is a trademark of Ampex Corporation, Inc. CMX is a trademark of CMX Company. Macintosh is a trademark of Apple Computer, Inc. Panasonic is a trademark of Matsushita Corporation, Inc. Sony is a trademark of Sony Corporation, Inc. Windows 95 is a trademark of Microsoft Corporation, Inc. Yamaha is a trademark of Yamaha Corporation, Inc. All other trademarks are the property of their respective holders. 03D Video Edit Suite Software--Owner's Manual Features 2 Copyright © 1997 Yamaha Corporation. All rights reserved. No part of the this software or this Owner's Manual may be reproduced or distributed in any form or by any means without the prior written authorization of Yamaha Corporation. Yamaha on the World Wide Web http://www.yamaha.co.jp/product/proaudio/homeenglish/ Keep This Manual For Future Reference 03D Video Edit Suite Software--Owner's Manual 3 Installing the Software 1 Installing the Software This chapter explains how to install the 03D Video Edit Suite software. Warning All automix data will be lost when the 03D Video Edit Suite software is installed, so back up your important data using MIDI Bulk Dump before installing. Refer to the 03D Owner's Manual for details. Similarly, Video Edit Suite settings and roll library memory data will be lost if the regular 03D software is reinstalled. Installation Requirements The 03D Video Edit Suite software can be installed from a Macintosh or PC computer running Windows 95. Transmission Device Macintosh Windows 95 PC 03D Connection TO HOST TO HOST Cable Macintosh serial cable PC serial cable2 Recommended Software Terminal-J1 HyperTerminal3 1. Terminal-J is included with the Video Edit Suite software. 2. 9-pin D-sub to 8-pin mini DIN cable 3. The HyperTerminal program is included with Windows 95. Installing from a Macintosh Computer 1. Connect an 8-pin mini DIN cable between the 03D's TO HOST port and the Macintosh's Modem port. 2. Turn on the Macintosh. 3. Insert the Mac 03D for Video Editing floppy disk into the floppy disk drive, double-click the floppy disk icon, and then copy the Terminal-J file to your hard disk. 4. Double-click the Terminal-J file to decompress it. The Terminal-J folder containing the Terminal-J program is created. 5. Copy the "03VEKxxxMIX.sea" file to your hard disk, and then double-click it to decompress it. The "03VEKxxxMIX" folder is created. 6. Copy the "03VEKxxx.T" and "03VEKxxx.X" files from the "03VEKxxxMIX" folder to the Terminal-J folder. 7. On the Chooser, turn off AppleTalk. 8. While holding down the [UTILITY], [DYNAMICS], and [EFFECT 2] buttons, turn on the 03D. The UPDATE PROGRAM page appears. 9. Double-click the Terminal-J icon to launch the program. 10. Choose Connection from the Options menu. The Connection Settings dialog box appears. 03D Video Edit Suite Software--Owner's Manual Installing from a Macintosh Computer 4 11. Make the following settings, as shown on the dialog box below, and then click OK. Method: Direct Serial Baud Rate: 38.4K Parity: None Data Bits: 8 Stop Bits: 1 Handshake: None 12. Choose Transfer from the Options menu. The Transfer Settings dialog box appears. 13. Click the Binary file icon. The settings for binary file transfers appear. 14. Turn off the "Recognize and use MacBinary format for non-TEXT files" setting, as shown below, and then click OK. 15. Choose X/YMODEM from the Options menu. The X/YMODEM options dialog box appears. 16. Turn off the CRC setting, as shown below, and then click OK. 17. Choose Connect from the Session menu. 18. On the 03D, use the cursor buttons and [ENTER] button to make the following settings. PORT: TO HOST FLYING: ON UPDATE BLOCK: ALL 19. In Terminal-J, choose TRANSMIT XMODEM from the File menu. The File Open dialog box appears. 03D Video Edit Suite Software--Owner's Manual 5 Installing the Software 20. Locate the "03VEKxxx.T" file, and then click Transmit. 21. On the 03D, use the cursor buttons to select START, and press the [ENTER] button. The message "Please send BLOCK TABLE FILE" appears on the 03D. The file is transmitted to the 03D. Wait until the following message appears on the 03D before proceeding: "Please send BLOCK 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F, G, H". 22. In Terminal-J, choose TRANSMIT XMODEM from the File menu. The File Open dialog box appears. 23. Locate the "03VEKxxx.X" file, and then click Transmit. 24. On the 03D, use the cursor buttons to select START, and press the [ENTER] button. The file is transmitted to the 03D. While the data is being transmitted, an asterisk flashes slowly on the 03D. Transmission may take between 5 and 20 minutes. When the file have been transmitted successfully, "UPDATE . . . DONE" and an EXIT option appear on the 03D. 25. Press the [ENTER] button to restart the 03D. That completes the installation process. 03D Video Edit Suite Software--Owner's Manual Installing from a Windows 95 PC 6 Installing from a Windows 95 PC 1. Connect an 8-pin mini DIN to 9-pin D-sub cable between the 03D's TO HOST port and a serial port (COM port) on the PC. 2. Turn on the PC. 3. Insert the 03D Video Edit Suite floppy disk into the floppy disk drive, and then copy the "03VEKxxx.T" and "03VEKxxx.X" files to the HyperTerminal folder on your hard disk (Hard Disk­>Program Files­>Accessories­>HyperTerminal. 4. While holding down the [UTILITY], [DYNAMICS], and [EFFECT 2] buttons, turn on the 03D. The UPDATE PROGRAM page appears. 5. Double-click the Hypertrm icon to launch the program. The Connection Description dialog box appears. 6. Enter a name for the connection (e.g., "03D"), and then click OK. Ignore the icon settings in this dialog box. The Phone Number dialog box appears. 7. Choose "Direct to Com x" from the Connect using menu (x being the number of the serial port to which the 03D is connected), and then click OK. The Port Settings dialog box appears. 8. Make the following settings, as shown on the dialog box below, and then click OK. Bits per second: 38400 Data bits: 8 Parity: None Stop bits: 1 Flow control: None 9. Choose Connect from the Call menu. 10. On the 03D, use the cursor buttons and [ENTER] button to make the following settings. PORT: TO HOST FLYING: ON UPDATE BLOCK: ALL 11. In HyperTerminal, choose Send File from the Transfer menu. The Send File dialog box appears. 03D Video Edit Suite Software--Owner's Manual 7 Installing the Software 12. Choose Xmodem from the Protocol menu. 13. Click Browse and locate the "03VEKxxx.T" file, and then click Send. 14. On the 03D, use the cursor buttons to select START, and press the [ENTER] button. The message "Please send BLOCK TABLE FILE" appears on the 03D. The file is transmitted to the 03D. Wait until the following message appears on the 03D before proceeding: "Please send BLOCK 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F, G, H". 15. In HyperTerminal, choose Send File from the Transfer menu. The Send File dialog box appears. 16. Click Browse and locate the "03VEKxxx.X" file, and then click Send. ...