DTPK95M Pads Set Accessories List The following accessories are included with this set. if any item is missing, please contact the dealer from whom you purchased the set. Please refer to the Owner's Manual for each product on the proper use and set-up. Drum Pads Clamp bolts X5 (For TP65/65S) Cymbal Pads Hi-hat Control Pedal Kick Pad Stopper X2 (For PCY65/65S) 9-Channel Snake Cable Drum Key Owner's Manuals 1each Example : Connecting with the 9-Channel Snake Cable Connection Example 1 : The DTXPRESS III is set on the left-side. Follow the numbers indicated on the 9-channel snake cable (1: KICK, etc) and properly connect the pads as shown in the diagram below. III 1 KICK 2 SNARE 3 TOM 1 4 TOM 2 5 TOM 3 6 RIDE 7 CRASH 1 8 HI HAT HH CONTROL 1 KICK 2 SNARE 3 TOM 1 4 TOM 2 5 TOM 3 6 RIDE 7 CRASH 8 HI HAT HH CONTROL SPECIAL MESSAGE SECTION NOTICE: Service charges incurred due to a lack of knowledge relathing to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer's warranty, and are therefore the owners responsibility. Please study this manual carefuly and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Warning: Do not attempt to disassemble. CRASH PCY65S DT XP RE SS II RIDE PCY65 TOM2 TP65 TOM3 TP65 I TOM1 TP65 SNARE TP65S HI HAT TP65 KICK KP65 HI HAT CONTROL PEDAL HH65 1 KICK KICK (KP65) HH CONTROL HI HAT CONTROL PEDAL (HH65) 2 SNARE SNARE (TP65S) 8 HI HAT HI HAT (TP65) 3 TOM 1 TOM 1 (TP65) 7 CRASH CRASH (PCY65S) 4 TOM 2 TOM 2 (TP65) 6 RIDE RIDE (PCY65) 5 TOM 3 TOM 3 (TP65) Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly. NAME PLATE LOCATIOIN: The name plate is located on the bottom of the product. The model number, serial number, power are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. Connections Example 2 : The DTXPRESS III is set on the right-side. The pads can be set as shown in the diagram below. Please note that in this case, numbers on the 9-channel snake cable (2: SNARE, etc.) will not match with the pad names and input numbers on the DTXPRESS III. III 1 KICK 6 RIDE 7 CRASH 3 TOM 1 2 SNARE 8 HI HAT 4 TOM 2 5 TOM 3 HH CONTROL 1 KICK 2 SNARE 3 TOM 1 4 TOM 2 5 TOM 3 6 RIDE 7 CRASH 1 8 HI HAT HH CONTROL Model : TP65 (1) Model : TP65 (2) Model : TP65 (3) Model : TP65 (4) Model : TP65S Purchase Date Serial No. Serial No. Serial No. Serial No. Serial No. Model : PCY65 Model : PCY65S Model : HH65 Model : KP65 Serial No. Serial No. Serial No. Serial No. CRASH PCY65S TOM1 TP65 HI HAT TP65 SNARE TP65S TOM2 TP65 RIDE PCY65 II SS RE XP DT I KICK KP65 TOM3 TP65 HI HAT CONTROL PEDAL HH65 5 TOM 3 HI HAT (TP65) 6 RIDE SNARE (TP65S) 4 TOM 2 CRASH 1 (PCY65S) 7 CRASH TOM 1 (TP65) 3 TOM 1 TOM 2 (TP65) 8 HI HAT RIDE (PCY65) 2 SNARE HH CONTROL TOM 3 HI HAT CONTROL PEDAL (TP65) (HH65) 1 KICK KICK (KP65) PLEASE KEEP THIS MANUAL * Cable length may not be sufficient for some setups. If the cable length is insufficient, please choose an optional cable (Yamaha C03S, etc.). ...