SERVICE MANUAL nx600 WEB ACCESS: http://www.yorkville.com WORLD HEADQUARTERS CANADA Yorkville Sound 550 Granite Court Pickering, Ontario L1W-3Y8 CANADA Voice: (905) 837-8481 Fax: (905) 837-8746 U.S.A. Yorkville Sound Inc. 4625 Witmer Industrial Estate Niagara Falls, New York 14305 USA Voice: (716) 297-2920 Fax: (716) 297-3689 Quality and Innovation Since 1963 Printed in Canada Manual-Service-nx600-1v1.pdf IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. INSTRUCTIONS RELATIVES AU RISQUE DE FEU, CHOC ÉLECTRIQUE, OU BLESSURES AUX PERSONNES AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE, N'ENLEVEZ PAS LE COUVERT (OU LE PANNEAU ARRIERE) CAUTION: AVIS: NE CONTIENT AUCUNE PIECE REPARABLE PAR L'UTILISATEUR. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Read Instructions The Owner's Manualshould be read and understood before operation of your unit. Please, save these instructions for future reference. CONSULTEZ UN TECHNICIEN QUALIFIE POUR L'ENTRETIENT Veuillez Lire le Manuel Il contient des informations qui devraient êtres comprises avant l'opération de votre appareil. Conservez S.V.P. ces instructions pour consultations ultérieures. Packaging Warning Keep the box and packaging materials, in case the unit needs to be returned for service. When using electric products, basic precautions should always be followed, including the following: Emballage Attention: Conservez la boite au cas ou l'appareil devait être retourner pour réparation. Lors de l'utilisation de produits électrique, assurezvous d'adhérer à des précautions de bases incluant celle qui suivent: Power Sources Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme on the unit is not defeated. Alimentation Hazards Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer's instructions when installing the product and use mounting accessories recommended by the manufacturer. The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus. Terminals marked with the "lightning bolt" are hazardous live; the external wiring connected to these terminals require installation by an instructed person or the use of ready made leads or cords. Ensure that proper ventilation is provided around the appliance. No naked flame sources, such as lighted candles, should be placed on the apparatus. L'appareil ne doit être branché qu'à une source d'alimentation correspondant au voltage spécifié dans le manuel ou tel qu'indiqué sur l'appareil. Cet appareil est équipé d'une prise d'alimentation polarisée. Ne pas utiliser cet appareil avec un cordon de raccordement à moins qu'il soit possible d'insérer complètement les trois lames. Des précautions doivent êtres prises afin d'eviter que le système de mise à la terre de l'appareil ne soit désengagé. Risque Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables. L'appareil pourrait tomber et blesser quelqu'un ou subir des dommages importants. Utiliser seulement un chariot, un support, un trépied ou une table recommandés par le fabricant ou vendus avec le produit. Suivre les instructions du fabricant pour installer l'appareil et utiliser les accessoires recommandés par le fabricant. Il convient de ne pas placer sur l'appareil de sources de flammes nues, telles que des bougies allumées. L'appeil ne doit pas être exposé à des égouttements d'eau ou des éclaboussures et qu'aucun objet rempli de liquide tel que des vases ne doit être placé sur l'appareil. Assurez que lappareil est fourni de la propre ventilation. Les dispositifs marqués d'une symbole "d'éclair" sont des parties dangereuses au toucher et que les câblages extérieurs connectés à ces dispositifs de connection extérieure doivent être effectivés par un opérateur formé ou en utilisant des cordons déjà préparés. Power Cord Service The AC supply cord should be routed so that it is unlikely that it will be damaged. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. The unit should be serviced only by qualified service personnel. Cordon d'Alimentation Service safety-4v3.eps · Oct. 26/05 Évitez d'endommager le cordon d'alimentation. N'UTILISEZ PAS L'APPAREIL si le cordon d'alimentation est endommagé. Consultez un technicien qualifié pour l'entretien de votre appareil. nx600 YS No. 6499 5932 5949 5931 5930 5867 5944 3785 3901 3006 3007 8487 8538 3489 3924 3628 8509 3451 7393 3854 3855 8933 8508T 8240D 3538 3549 3558 3668 3903 5989 8934 4599 4712 4700 5012 4608 4624 9041 8729 8874 8843 8786 8751 8935 8903 8995 3744 7410 8908 8489 8492 8996 Description 0R15 20% 1W7 1.35AMP PTC AUTOFUSE __2U2 100V 10%CAP BLK RAD POLY FLM _3U3 140AC 10%CAP BLK RAD POLYP FLM _6U8 100DC 10%CAP BLK RAD POLYE FLM _10U 100DC 10%CAP BLK RAD POLYE FLM _15U 160AC 10%CAP BLK RAD POLYP FLM _15U 100DC 10% CAP BLK RAD PLYE FLM _150UH COIL 22AWG R000 BOBBIN _690UH COIL 20AWG R000 IRON CORE 1200UH COIL 18AWG R221 IRN CORE 1600UH COIL 18AWG R262 IRN CORE ADAPTOR,SPEAKER STAND,PLASTIC,LARGE RUBBER BUMPER W/ WASHER 1.375X1.375 CLIP 250X032 18-22AWG DISCO/INSL 1/4" JCK PCB MT VERT 2XTIP HICURNT SPKON 4C PCB MT VERT 250TAB GRY #4 BLACK BLANK XOVERDISH PLASTIC CNFG1 EYELET SMALL 0.089 OD PLATED 8R 30W 1" DRIVER BMS 8 OHM 1/2-13X1.5" NYLON HEX SCREW 1/2-13 NYLON HEX NUT 1/4-20 INSIDE 7/16-20 UNF FLATALLEN LARGE DISH ALUMINIZED DECAL "Y" LOGO SML. DOMED YORKVILLE BLUE 24 PIN BREAKAWAY LOCK .156 TRIFURCON TERM .156 TERM HOUSING 4 CIR .156/RAMP 4 CIR CHASSIS MOUNT HDR .156 PCB CONN 4 CIR BOTTOM .156 4 CIR CABLE HOLDER .098 7/16-20 UNF HEX NUT GRD 5 CLEAR ZNC 22AWG SOLID SC WIR T&R JMP 15.W 1R8 10% BLK RES 10.W 8R2 5% BLK RES 15.W 8R2 5% BLK RES 15.W 12R 10% BLK RES 1/2W 1K5 5% T&R RES .093" HOLE .156" STAG 16GA 36"X120" #4 X 3/8 FLAT QUAD TYPE A JS500 BLK 8-32 X 1" PAN PHIL TAPTITE JS500 10-32 X 1 1/8 FLAT PH MS JS500 10-32 X 1 1/4 PAN QD MS JS500 BLACK 10-32 X 2 PAN PH MS JS500 1/4-20 X 23MM JOINT CON. BOLT B/O M5 X 16 DIN 7985 HHZINC SCREW 3/8" STEEL FLAT WASHER,ZINC CLEAR SNAP IN .375 SPACER RICHCO 15" 8R 600WPGM NEO SPEAKER #10 SAE FLAT WASHER .25"ID .565" OD 1/4-20 SPLIT WASHER ZINC 7/16" SPLIT LOCK WASHER CLEAR ZINC 3/8" SPLIT WASHER Qty. 1 1 1 1 1 1 2 1 1 1 1 1 3 2 2 2 1 10 1 1 1 5 1 1 0.167 4 1 1 2 1 5 6 4 1 1 2 11 4 4 4 16 20 3 4 2 5 4 1 14 14 5 5 YS No. Description Qty. A B C D E F G H I J K M673.PCB_DATABASE_HISTORY 1 2 1/4in JCK 20% SLEEVE J1 3924 PTC1 1A35 6499 NX600 # DATE VER# DESCRIPTION OF CHANGE 1 AUG-18-2004 V1.00 FIRST PRODUCTION RELEASE 2 OCT-21-2004 V2.00 CHANGED C1 TO 5867, AND ADDED FREE PAD FOR 3D V 37.5mm LEAD SPACING SUBSTITUTION PART 4 NOV-23-2004 V3.00 PC#6770 - ADD 2ND SPEAKON (GT) 5D V N 6D N V 7D N V 8D N V 9D N V 10 D N V 11 D N V 12 D N V 13 D N V MODEL(S):- 1 2 3 3 C2 3006 1/4in JCK SLEEVE J2 3924 1200UH L1 140V 3U3 4 C3 15U C4 100V 15U 100V 4 R3 15.W SPEAKON 4C 3628 1+ 2_ 5 C1 . 250V 15U R2 10.W J4:A 8R2 8R2 . 1_ 2+ 3628 SPEAKON 4C J4:B SP2 #7410 15" 8R 600W PGM NEO WOOFER 15.W 15.W R1 1R8 . C5 100V 10U C6 100V 2U2 C7 6U8 100V 5 15.W 15.W R4 12R R5 12R . J3:A 6 R7 1R8 . . SPEAKON 4C 3628 1+ 2_ 1_ 2+ 3628 SPEAKON 4C J3:B R9 1R8 R8 1R8 L2 150UH 3785 15.W 15.W . . SP1 #7393 8R 30W 1" DRIVER HORN L5 L4 1600UH 3007 690UH 3901 6 7 7 Product 8 NX600 PCB# M673 Sheet 1 of 2 8 Date: Mon Mar 07, 2005 Filename: M673-3V0.sch2002 A B C D E F G H I J Rev: V3.00 K BlankSize - 13050x9350 Pcb Mech M673V3.00 ETCH GUIDE Top Assy M673 V3.00 NX600 V3.00 RT V 3538 M673 (2/2) OUTSIDE WIRE RT V OUTSIDE WIRE 12R 15.W 12R 15.W RT V W3 IRON Inductor R5 M673.PCB_DATABASE_HISTORY NX600 # DATE VER# DESCRIPTION OF CHANGE 1 AUG-18-2004 V1.00 FIRST PRODUCTION RELEASE 2 OCT-21-2004 V2.00 CHANGED C1 TO 5867, AND ADDED FREE PAD FOR V 37.5mm LEAD SPACING SUBSTITUTION PART 3D 4 NOV-23-2004 V3.00 PC#6770 - ADD 2ND SPEAKON (GT) Red 5D V N Black Black Black V N 6D Yellow V N 7D Yellow V N 8D V N 9D NOTE: CONNECT YELLOW N V 10 D N V 11 D WIRE TO "HORN +" (YELLOW V N WIRE IS GROUND - HORN IS OUT 12 D V N 13 D OF PHASE) Red Black 4608 MODEL(S):- StepAndRepeat - X2@6.050,Y1@0 +H -H -W +W R4 L5 RT V 690UH 4608 R3 INSIDE WIRE C3 RT V 15U 100V RT V 5944 RT V T 15U R V 100V 5944 RT V 8R2 15.W RT V RT V 0R262 IRON 1600UH Inductor RT V 6U8 100V 5931 C4 R2 RT V C7 RT V 8R2 10.W L2 RT V 3785 10U 100V 5930 RT V 4700 OUTSIDE WIRE RT V 5949 140V 3U3 RT V 60V ADD RTV IN GAPS BETWEEN THESE CAPS M673 DRILLING HISTORY MODEL(S):# 1 2 3 4 5 6 DATE JAN-17-2005 D D D D D NX600 VER# DESCRIPTION OF CHANGE P2 CORRECTED DRILL BIT OVERLAP BREAKAGE V N V N V N V N V N M673 PENDING CHANGES NX600 PENDING CHANGE X X X X X X Facing interior of cab 5932 INSIDE WIRE L4 R1 1K5 1/2W RT V 1K5 RV 1/2W T 2U2 100V C6 1R8 15.W 1K5 1/2W RT V RT V C5 150UH RT V INSIDE WIRE 1A3 5 C2 W1 3903 1 PCB CONN 4 CIR BOTTOM .156 2 3 4 MODEL(S):# 1 2 3 4 5 6 PC# PC PC PC PC PC PC 22AWG RT V 6499 PTC1 1K5 1/2WT RV 5989 1K5 1/2W T RV 4712 W5 R8 RT V W6 RT V 1K5 1/2WRT V 1R8 15.W SPEAKON 4C 1+ 2- 3903 PCB CONN 4 CIR BOTTOM .156 1 2 3 4 *PLACE IMPLEMENTED CHANGES INTO BOARD HISTORY 4712 1K5 RV 1/2W T W2 PRODUCTION NOTES: 1. BEND & KINK C1 LEADS TO LAY PART ON ITS SIDE 2. AFTER APPLYING RTV AROUND AND UNDER C1, ENSURE C1 IS PRESSED AND HELD FLAT AGAINST BOARD 3. MOUNT LARGE 15W RESISTORS (R1, R7, R8, R9) ON TOP OF AUTO-INSERTED 1/2W RESISTORS AND UPSIDEDOWN EYELETS. THIS IS TO KEEP LARGE 15W RESISTORS FROM CONTACTING THE BOARD DIRECTLY 4. HAND INSERT X1 AND X2 JUMPERS 5. PUSH C7 AGAINST L4 AND RTV TOGETHER 6. WIRING LINE: ADD TWO STRIPS OF #8384 FOAM ON TOP OF C1 #5867 (TO FILL GAP BETWEEEN C1 AND DISH) J1 3924 SOCKET SOCKET UPSIDE DOWN NORMAL R7 SLEEVE TIP1 4712 W7 0R221 IRON Inductor OUTSIDE WIRE Facing exterior of cab X4 X3 RT V J3 INSIDE WIRE SPEAKON 4C 1+ NL4MP-1 3628 NORMAL LARGE SOCKET WITH DIRECTION J2 SLEEVE 5867 L1 TIP1 250V 15U 1200UH J4 1+ 2- 2- 2+ 3628 TIP2 1- 1- NL4MP-1 RT V 1R8 15.W 1K5 1/2W T RV 21K5 RV 1/2W T 1+ 2+ 2+ TAB 3924 M673 (1/2) NX600 V3.00 TIP2 RT V 1- C1 RT V RT V SHORT AXIS RT V X2 X1 W8 RT V 4712 R9 1- 2+ 1R8 15.W 1K5 RT 1/2W V RT V 1K5 1/2W CLINCH ORIGIN INSERT VCD ORIGIN LONG AXIS ETCH GUIDE ...