User manual ZALMAN CNPSPLUS(S)

Zalman Tech Co., Ltd. User s Manual http://www.zalman.co.kr E-mail:zalman@zalman.co.kr 1) Zalman s CPU Coolers do not generate noise and vibration in Silent Mode. 2) The heat dissipating material of the Flower HeatSink (FHS) is 100% Aluminum or Copper. 3) Separation of the FHS from the CPU fan prevents transfer of the fan's vibration to the CPU. 4) By utilizing a 92mm fan, both the CPU and the motherboard chipset are cooled. 5) The cooling fan can be mounted at any desired location, making it compatible with virtually all computer cases and motherboards (Note: computer cases that have the power supply covering the CPU cannot be used). 6) CPU can be cooled to a temperature sufficiently below the temperature required by the CPU manufacturer in Silent Mode. 7) Zalman s CPU Coolers enable very stable operation of a CPU in an OVERCLOCKED environment. * If you try OVERCLOCKING, please make sure that the fan is in Normal Mode. * Zalman Tech. Co., Ltd. is not responsible for any damage to systems or CPUs caused by CPU OVERCLOCKING. 1) FHS (Flower HeatSink) : ZM6548BC-XXXX 3) Thermal Grease 5) Clip 7) Heatsink Installation Tool (Clip Mate) 2) NP FAN & Bracket : FB123 4) Screw bolts (Inch-sized/mm-sized bolts) 6) One Noiseless Connector RC56 Model Spec. Part No. Dimensions (mm) Dissipating Area ( Base Material Weight (g) ) CNPS2005-Plus CNPS3000-Plus CNPS3100-Plus CNPS3100-GP (Gold Plus) ZM6548BC-Al ZM6548BC-AlCu 95~110(L) Pure Aluminum + Pure Copper 148 0.39 0.32 ZM6548BC-Cu 65(H) ZM6548BC-Gold 52(W) 2000~2100 Pure Aluminum 119 0.41 0.34 Pure Copper 296 0.34 0.26 Pure Copper with Gold Plating 296 0.34 0.26 The specifications of the cooler may change without prior notice to improve the performance thereof. Dimensions : 92(L) X 92(H) X 25(W)mm Speed : Silent mode :1400 RPM 10% Normal mode : 2800 RPM 10% Bearing Type : 2-Ball Weight : 85g Noise : Silent mode : 20.0dB 10% Normal mode : 35.0dB 10% AMD Athlon (Socket A), AMD Duron, INTEL Pentium III, INTEL Celeron, VIA C3 CPU Type Model INTEL,VIA AMD PentiumIII,C3 Silent mode Normal mode Silent mode Duron Athlon UP to 1.0 1.4 UP to 1.2 Athlon XP Athlon XP (T-Bird) UP to 1.33 (1500+) UP to 1.6 (1900+) CNPS2005-Plus CNPS3000-Plus CNPS3100-Plus CNPS2005-GP UP to 1.53 (1800+) UP to 1.73 (2100+) UP to 1.33 (1500+) UP to 1.6 (1900+) Normal mode Supports all Supports all current CPU current CPU Silent mode clock speeds clock speeds Normal mode Silent mode Normal mode 1.4 UP to 1.67 (2000+) UP to 2.13 (2600+) UP to 1.53 (1800+) UP to 1.73 (2100+) Over 2.13 (2600+) UP to 1.53 (1800+) UP to 1.73 (2100+) Over 2.13 (2600+) 1) For a noiseless computer, a Noise Prevention (NP) Power Supply, a NP HDD, a NP CD-ROM and a NP VGA Card should be used together with this cooler. 2) Zalman affixes a Computer Noise Prevention System (CNPS) Mark to each of its parts and components used for noiseless computers. 3) For a high-performance NP VGA Card, it is preferable to use a VGA FHS. 4) When buying a new VGA Card, it is recommended to buy a VGA Card without a fan. Korean Patent Application No. 01-11056 Patent Applications Pending in over 20 nations around the world, including the U.S., EU, and Japan CPU & Socket FHS Clip Fan Br123 Fan Fix 1 } FB123 < Fig. 1 > The specifications of the cooler may change without prior notice to improve the performance thereof. 1) Spread the thermal grease thinly onto the CPU core's surface that comes in contact with the FHS as shown in FIG. 2. 2) Install the clip across the FHS as shown in FIG. 2 3) Hook the short leg of the clip onto the socket first, then hook the long leg on by pushing the hole in the leg with the heatsink installation tool or an ordinary screw driver as shown in FIG. 3. 4) If you need to reinstall the FHS, remove the clip by inserting the heatsink installation tool into the clip's hole and pushing outward, as shown in FIG. 4, or inserting an ordinary flathead screw driver into the clip's slit and pushing outward, as shown in FIG. 5. Thermal Grease < Fig. 2 > < Fig. 3 > < Fig. 4 > < Fig. 5 > The specifications of the cooler may change without prior notice to improve the performance thereof. 1) As shown in FIG. 7, you can freely place the fan and the bracket in any desired location with the FB123. Therefore, place the fan in an ideal location as shown in FIG. 6. You can also place an additional fan on the FB123 to maximize the cooling of the VGA Card as shown in FIG. 8. 2) Screw on the FB123 firmly at the VGA Card slot hole and the expansion slot hole next to it with the included bolts. (Caution! The included bolts are of two types : inch-sized and mm-sized. Use the appropriate type for the slot holes.) < Fig. 6 > < Fig. 7 > < Fig. 8 > The specifications of the cooler may change without prior notice to improve the performance thereof. Connect the noiseless connector (RCXX) to the FB123 fan's 3-pin connector. Then, connect the noiseless connector to the motherboard's CPU fan connector (3-pin) as shown in FIG. 9. Note 1) The separate speed noiseless connector will be on sale afterwards (See FIG. 10). Refer to the manual when using it. Fan Connector(3-pin) Noiseless Connector CPU fan Connector (3-pin) Motherboard Variable Speed Noiseless Connector < Fig. 9 > < Fig. 10 > Turn on the computer after the assembly is finished. If an alarm sound is generated to indicate that the rotation of the CPU fan is slow after the system monitoring program starts to operate during booting of the computer, please unplug the noiseless connector from the fan and set "CPU Fan Detected" to "Disable" in the BIOS settings, or set the slowest rotation of the CPU fan in the system monitoring program, to less than or equal to 1500 RPM. Then, reconnect the noiseless connector to the CPU fan connector. Note 2) Some motherboards do not boot if the RPM of the CPU fan is not measured. In this case, please boot the computer with the Cooler fan in Normal Mode, i.e. after removing the noiseless connector. If the BIOS settings are updated, Silent Mode can be used by reconnecting the noiseless connector. For information on updating the BIOS, please refer to the motherboard manufacturer's web site. Connect the 3-pin connector of the fan directly to the fan connector (3-pin) of the motherboard as shown in FIG. 11. Turn on the computer after the assembly is finished. If an alarm sound is generated to indicate that the rotation of the CPU fan is slow after the system monitoring program starts to operate during booting of the computer, please set "CPU Fan Detected" to "Disable" in the BIOS settings, or set the slowest rotation of the CPU fan to less than or equal to 1500 RPM. Fan Connector(3-pin) CPU fan Connector (3-pin) Motherboard < Fig. 11 > The specifications of the cooler may change without prior notice to improve the performance thereof. For more information on this product, visit our homepage at www.zalman.co.kr.