User manual ZALMAN WB4

(English Version) ZM-WB4 Gold CPU WATER BLOCK for Higher Water Cooling Performance Please visit our website and watch the ZM-WB4 Gold installation video for easy installation. Please read this manual thoroughly before installation. The specifications of this product and its components may change without prior notice to improve performance. http://www.zalman.co.kr http://www.zalmanusa.com Precautions 1) Test the product for leakage away from the system before installing it on the system. confirming no leakage, proceed with the installation and use. 2) Use approved coolant for computer water-cooling to prevent corrosion. 3) Use coolant tubes listed under the compatibility list. 4) Do not use the product if it interferes with any motherboard components. 5) Familiarize yourself with this manual. 6) Keep this product and its associated system away from children. Disclaimer Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing. 1. Features 1) Zalman's creative dimple-type processing technology allows lightness in weight and excellent cooling performance. 2) Pure copper-base material water block provides excellent heat transfer, and gold-plated base prevents corrosion. 3) Use of transparent and strengthened plastic water block cover allows lightness in weight, excellent durability, and view for the user to be able to check the flow of internal coolant. 4) Connection fitting for the hose is a single-body cover in the form of two connection structure types, which allows for various types of hoses to be used. 5) Compatible with Intel Pentium 4 (Socket 775/478) and AMD (Socket AM2/754/939/940). 2. Specifications 1) Weight : 135g 2) Materials : Pure Copper (Water Block Base) and Polyester (Water Block Cover) 3) Dimensions : 63(W) x 63(L) x 16.5(H)mm 4) Compatible Tubes (Outer x Inner) : 14x10mm, 13x10mm, 13x9mm, 12x9mm, 12x8mm, 11x8mm, 10x8mm 1 3. Exploded View Bolt Clip Bolt Clip for Intel Water Block Assembly Fixing Bolt for Clip Support Clip Support for Socket 775 Clip Support for Socket 478 Backplate for Socket 775 Retention Guide Clip for AMD ZM-WB4 Gold Retention Guide for AMD Tube Clamp B (11.5 X 8mm):13x9mm, 12x9mm, 12x8mm, 11x8mm, 10x8mm Tube Clamp A (13.8 X 8mm): 14x10mm, 13x10mm 2 4. Components 1) Common Components CPU Water Block Assembly Two(2) Clips Four(3) Bolts Three(3) Clip Bolts Thermal Grease Two(2) Tube Clamps A (13.8 X 8mm ) Two(2) Tube Clamps B (11.5 X 8mm ) Paper Washer User's Manual 2) Components for Intel Pentium 4 (Socket 775) Clip Support for Socket 775 Backplate for Socket 775 Four(4) Fixing Bolts for Clip Support 3) Components for Intel Pentium 4 (Socket 478) Two(2) Clip Supports for Socket 478 4) Components for AMD (Socket AM2/754/939/940) Clip for AMD 3 5. Installation 1) Intel Pentium 4 -775 Install Clip Supports for Socket 775 Align the clip support for socket 775 and the backplate for socket 775 with the mounting holes on the motherboard and fasten them together using the clip support fixing bolt. The lever slot on the clip support should be properly oriented on the hinged side of the socket lever when installing. Clip Support Fixing Bolt CPU Socket Lever Lever Slot Clip Support for Socket 775 Motherboard Backplate for Socket 775 Socket Lever Install Clip Align the Clip's holes with the Waterblock tabs as shown in the diagram, and install the Clips by slowly screwing the Clip Bolts into the Clip holes. Hold the Clips with one hand, and install with slight hand motions for easy installation. Clip Clip Bolt Apply Thermal Grease Clean the contact surface of the CPU completely. Apply Thermal Grease on the CPU surface that makes contact with the base of the Water Block. Thermal Grease Install CPU Water Block Set the CPU Water Block at the center of the CPU. Screw the Bolts in slightly, then tighten each Bolt a few turns at a time while alternating between the two until the Clips are completely pressed against the Clip Support. 4 Note 1) Make sure that the outlet is installed in a manner so that the outlet is placed above the inlet as shown in the picture. Outlet Inlet Motherboard 2) Intel Pentium 4 -478 Install the Clip Supports for Socket 478 Install the Clip Supports for Socket 478 on both sides of the Retention Guide as shown in the diagram on the right. Retention Guide Clip Support for Socket 478 Install Clip Align the Clips' holes with the Waterblock tabs as shown in the diagram, and install the Clips by slowly screwing the Clip Bolts into the Clip holes. Hold the Clips with one hand, and install with slight hand motions for easy installation. Clip Clip Bolt 5 Apply Thermal Grease Clean the contact surface of the CPU completely. Apply Thermal Grease on the CPU surface that makes contact with the base of the Water Block. Thermal Grease Install CPU Water Block Set the CPU Water Block at the center of the CPU. Screw the Bolts in slightly, then tighten each Bolt a few turns at a time while alternating between the two until the Clips are completely pressed against the Clip Support. 3) AMD - AM2/754/939/940 Apply Thermal Grease Clean the contact surface of the CPU completely. Apply Thermal Grease on the CPU surface that makes contact with the base of the Water Block. Thermal Grease Install CPU Water Block Set the CPU Water Block at the center of the CPU. Hook the Clip's slot into the center lug of Clip support, then hook the lever's slot into the other center lug. Lever's Slot Center Lug Clip's Slot Lever Center Lug 6 Zalman Noise Prevention System Stable performance and noiseless liquid cooling system can both be achieved with the use of Zalman's Noiseless Power Supply, Heatpipe Hard Disk Cooler, Noiseless Case Fan and Northbridge Water Block. Noiseless Power Supply Heatpipe HDD Cooler Noiseless Case Fan Northbridge Water Block TNN(Totally No Noise) Computer Case TNN 300 TNN 500AF TNN Computer Enclosures are the world's first environment-friendly noiseless computer enclosures that operate without the use of a fan. TNN Computer Enclosures use the aluminum enclosure itself as a heatsink. They are ideal for environments that require silence, as well as for home theatre systems and multi-media systems. Home Theatre PC Enclosures The HD160 is designed for ultra quiet home theatre PC operation, utilizing optimized ventilation and anti-vibration reinforcements, making it ideal for environments that require silence such as living rooms, bedrooms, educational facilities, and offices. HD160 For more information, please visit our website. 7