VGA WATER BLOCK ZM-GWB1 Features 1. Pure aluminium base ensures optimal weight and heat dissipation. 2. Anodized product surface prevents corrosion. 3. Two types of water blocks provide support for virtually all types of ATI and NVIDIA VGA card. This product can be reused with upgraded video cards. (Note: This product is not compatible with VGA cards that do not have holes around the VGA chip) 4. RAM heatsinks provide effective heat dissipation. Specifications Small Type Material Dimensions(mm) Weight RAM Heat Sink Tubing 35.6 (W) X 66 (L) X 27.5 (H) 60g Large Type 35.6 (W) X 76 (L) X 27.5 (H) 75g Pure Aluminium (anodized) Aluminium (Anodized), 8pcs, 5g / pc Silicone Tubing (12 X 8, 13 X 9 mm) Installation Small Type Large Type Tube Clamp Tube Bolt RB LO C WA TE VG A Plate Spring Thermal Grease RAM Heatsink O-Ring Nipple Themal Conductive Tape Note 1. To install the water block, ensure that it is placed on the middle of the GPU core and that it is tightly pressed onto the GPU. 2. To install the RAM heat sinks, remove any residual thermal grease on the surface of the RAM chips by using acetone or alcohol. (Grease or any kind of stain on the surface of thermal tape may cause it not to stick.) 3. Stop the installation if the water block interferes with any other components. 4. Watch for any leakage if using tubing (PVC, Urethane) other than the silicone tubing that's provided. 5. To install tube clamp, use pliers or other suitable tool. The specifications of this product and its components may change without prior notice. VG A WA TE R BL OC K K ...