User s Manual (English Edition) Intel Pentium 4 Socket 478 CPU AMD Athlon/ Duron/Athlon XP Socket 462 CPU AMD Athlon 64 Socket 754 CPU ZM-WB2 Gold * Please read before installation http://www.zalman.co.kr http://www.zalmanusa.com 1. Features 1) Gold plated pure copper base maximizes cooling performance and prevents CPU blocks from galvanic corrosion 2) Intel Pentium 4 (Socket 478), AMD Athlon/Duron/Athlon XP (Socket 462),Athlon 64 (Socket 754) compatible design for broad compatibility. 3) Three types of compression fitting are offered for use with water tubes (8X10mm,8X11mm,10X13mm) * Zalman Tech. Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING. 2. Specifications Part No 1 2 3 4 5 6 7 8 9 10 11 12 13 Part name CPU block Hand screw Thermal grease Clip User's manual Clip supports Clip supports A Clip supports B Bolts Paper washer Nipple Back plate Fitting 3 set Q' ty 1 2 1 1 1 2 2 2 4 1 set 2 6.2 60.0 8.2 5.0 5.0 0.8 Socket 478 Socket 462 Socket 462 Clip supports, A, B-type 7, 8 mountimg Socket 754 mountimg Socket 754 mountimg Fitting to 8 x 10mm, 8 x 11mm, 10 x 13mm tubes Weight (g) 447.0 8.0 1.8 9.6 Use CPU mountimg Clip mountimg Apply to cpu core CPU block mountimg NOTE 1) The maximum weight for the cooler is specified as 450g/450g/300g for socket 478/754/462 respectively. Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman Tech Is not responsible for any damage that occurs when moving a computer. 1 3. Exploded View 1) Exploded view of CPU block a Block base Fittings a 2) Exploded view for CPU type using ZM-WB2 Gold Intel Pentium 4 Socket 478 CPU AMD Athlon 64 Socket 754 CPU AMD Athlon/ Duron/Athlon XP Socket 462 CPU 2 4. Components 1) Common Components CPU block - 1 pc. Hand screw - 2 pcs. Thermal grease - 1 pc. Clip - 1 pc. User's manual Fittings - 6 pcs. (3 sets) 2) Components for Intel Pentium 4 (Socket 478) Two (2) Clip Supports for Socket 478 3) Components for AMD Athlon / Athlon XP (Socket 462) One (1) A -Type(blue) Clip Support for AMD Socket 462 One (1) B -Type(white) Clip Support for AMD Socket 462 Four Bolts - For Fastening Clip Supports One Set of Washers 4) Components for AMD Athlon 64 (Socket 754) Two Nipples One Backplate 3 5. Compatible CPU Types 1) Intel Pentium 4 - Socket 478 All speeds of Pentium 4 Socket 478 CPUs Caution As shown in Figure 2, a mainboard that is not compliant with the "10.2 mm mainboard component height restriction" standard, introduced by Intel, may create interference between components and the clip. Please do not install the ZM-WB2 when this interference is observed. 10.2mm Motherboard component height restriction Clip Mainboard component Top View Top View Clip Mainboard component Side View Side View Clip Figure 1 (O) All speeds of AMD Socket 462 CPUs Figure 2 (X) 2) AMD Athlon/Duron/Athlon XP - Socket 462 Caution This product requires "Heatsink Attach Holes" around CPU Socket as shown on the right. This product can not be installed if any Motherboard component(capacitor) taller than 1.5cm is located under the clip. 3) AMD Athlon 64 - Socket 754 All speeds of AMD Socket 754 CPUs Heat sink attach holes 4 6. Cautions During Installation 1) Keep this product away from children. 2) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the product outside its intended purpose.. 3) The exposed core of a Socket 462 CPU can be damaged if proper care is not taken. Read the "Installation" section thoroughly before installing. 4) Please do not install this product if ZM-WB2 interferes with any mainboard components. 5) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the ZM-WB2. 7. Installation (INTEL Pentium 4, Socket 478) 1) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU core (IHS). Thermal Grease CPU 2) Install Clip Support Install the two clip supports at both sides of the retention guide as shown on the right. Retention Guide Clip Support 5 3) Insert Hand screws Insert hand screws into the inner holes on the clip. Hand screw Outer hole Clip 4) Fasten Hand screws Place the CPU block on the center of the CPU. Screw in both Hand screws in an alternating fashion until they are completely tightened. Clip Inner hole 8. Installation-AMD XP/Duron, Socket 462 1) Install Clip spport Install the socket 462 clip supports as shown on the right. Be sure to install A -Type clip Paper support (Blue) next to the lever. washer Mainboard B-Type Clip Support (White) A-Type Clip Support (Blue) Lever Paper washer Bolts B-Type Clip Support (White) 6 2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU. CPU 3) Insert Hand screws Insert hand screws into the outer holes on the clip. Thermal Grease 4) Fasten Hand screws Place the CPU block on the center of the CPU. Screw in both hand screws in an alternating fashion until they are completely tightened. Outer hole Clip A-Type Clip Support B-Type Clip Support Inner hole 9. Installation-AMD XP/Duron, Socket 462 1) Fasten Nipples Position the backplate on the bottom of the mainboard under the CPU socket, then fasten the nipples as shown on the right. * When installing the ZM-WB2 on an Athlon 64, the retention frame is not needed. Nipple Large Hole Washer Main board Backplate 7 2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU. CPU 3) Insert Hand screws Insert hand screws into the outer holes on the clip. Thermal Grease 4) Fasten Hand screws Place the CPU block on the center of the CPU. Partially screw the bolts into the nipples. Then, screw both bolts down further in an alternating fashion until they are completely tightened. Hand screw Clip Outer hole Inner hole 10. Build a noiseless system Creating a Complete Noiseless System Use the following Zalman products to achieve stable and silent operation of your computer, Noiseless Power Supply, Fanless Coolers for Northbridge Chipset & Video Card, and Noiseless Fan. Power supply ZM400A-APF Northbridge Cooler ZM-NB47J Noiseless fan VGA Cooler ZM80C-HP HDD Cooler ZM-2HC1 8 ...