LAVADORA-SECADORA WASHER-DRYER WDJD 1082 124976161 MANUAL DE USO INSTRUCTION BOOKLET YOUR NEW WASHER-DRYER This new washing machine, which is fitted with the Jet System, patented Zanussi, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. Further savings are achieved by washing small loads of laundry, since water and electricity consumption is proportional to the quantity and type of laundry being washed. s The temperature selector dial will allow you to choose the most suitable temperature for your laundry. s s Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed. Environment protection s Packaging recycling s s The special wool programme with its new delicate wash system treats your woollen with extreme gentleness. The automatic cooling of the washing water from 95° to 60°C before draining will prevent old drain pipes from being deformed. The two drying programmes will give your wash that soft, relaxed feel whatever the weather. Materials marked with the symbol are recyclable. To enable them to be recycled, they must be placed in the appropriate collection areas (or containers). Check with your local authorities. >PE<= polyethylene >PS<= polystyrene >PP<= polypropylene s Machine scrapping Hints on how to save energy By following these hints you will obtain economical washing without damaging the environment: s Whenever possible, wash the maximum load for the selected programme, without overloading the drum. s Use the prewash programme only for very soiled laundry. When the appliance is to be scrapped, cut off the power supply cable and make the door closing device inoperative to avoid it becoming a death trap for a child. For correct disposal of the machine, contact your local authority department which provides for collection of urban solid refuse. The symbols you will see on some paragraphs of this booklet have the following meaning: Important information concerning the safety in the use of your machine. Disregarding this information might lead to damages. i Information for correct use of your machine and to obtain the best performance. Important information concerning environment protection. Our contribution to the protection of the environment: we use recycled paper. 24 CONTENTS Warnings Description of the appliance s 26 27 27 27 28 28 28 29 29 29 30 31 31 31 32 33 33 33 33 33 33 34 34 35 36-37 38-39 Maintenance s s s s 40 40 40 40 41 41 41 42-43 Detergent dispenser drawer Technical specifications Installation s s s s s s s s Transit devices Positioning Water inlet Water drainage Electrical connection Door reversal Something not working? Use s s s s s s s Control panel Controls Programme selection Washing and drying hints Sorting the laundry Temperatures Before loading the laundry Maximum loads Removing stains Detergents and additives Drying International wash code symbols Operating sequence Washing and drying programmes 25 ENGLISH Bodywork Detergent dispenser drawer Drain filter Water inlet filter Emergency emptying out Frost precautions WARNINGS It is important that this instruction book be kept with the appliance for future reference. If you sell or give the appliance away, make sure that the book is passed to the new owners so that they can familiarise themselves with its operation and relevant warnings. The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. General warnings s s s s s When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. This appliance is designed to be used by adults. Children must not be allowed to touch the controls or play with the product. During high temperature washing and drying cycles the glass door becomes very hot. Do not touch it. Pets sometimes climb into washing machines. Check the drum before each use. s s s Installation s s s s s All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. Any electrical work required to install this appliance must be carried out by a qualified electrician. Any plumbing work required to install this appliance must be carried out by a qualified plumber. After having installed the machine, check that it is not standing on its electrical supply cable. If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the adjustable feet and the floor. s s s s Do not overload the appliance. Follow the instructions in the instruction book. Make sure that all pockets are empty. Objects such as coins, safety pins, pins and screws can cause extensive damage. Do not machine wash garments saturated with petroleum, methylated spirits, trichlorethylene, etc. If such fluids have been used to remove stains prior to washing, wait until they have completely evaporated from the fabric before placing garments in the appliance. Place small items such as socks, belts, etc. in a cloth bag or pillowcase to prevent them getting trapped between the drum and the tub. Use only the recommended quantities of fabric softener. An excessive amount could damage the laundry. Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal and prevents the formation of musty smells. Always check that water has emptied out before opening the door. If not, drain the water following the instructions in the instruction book. Always unplug the appliance and shut the water tap after use. Service/repair s Use s s s This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. Only wash and dry fabrics which are designed to be machine washed and dried. Follow the instructions on each garment label. If you use a liquid detergent with a dispenser which has to be placed directly in the drum, remember to remove this dispenser before drying. s In the event of a fault, do not attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause damage. If repairs are needed, contact an authorised service centre and ask for genuine spare parts. 26 DESCRIPTION OF THE APPLIANCE 01 Detergent dispenser drawer 02 Programme card 03 Drying pilot light 04 Drying time selector dial 05 Delicate drying button 06 On/Off button 07 Temperature selector dial 08 Operating pilot light 09 Programme selector dial 10 Door handle 11 Filter 12 Adjustable feet 1 3 4 56 7 8 9 10 11 12 Detergent dispenser drawer and programme card Prewash Main wash Fabric softener Bleach A programme card in Spanish is on the handle of the detergent dispenser drawer. P0259 Cl Cl TECHNICAL SPECIFICATIONS DIMENSIONS Height Width Depth Cotton Synthetics Delicates Woollens 85 cm 60 cm 57 cm WASHING 4.5 kg 2.0 kg 2.0 kg 1.0 kg DRYING 2.25 kg 1.50 kg - MAXIMUM LOAD SPIN SPEED POWER SUPPLY VOLTAGE/FREQUENCY TOTAL POWER ABSORBED MINIMUM FUSE PROTECTION WATER PRESSURE Minimum Maximum 1000 rpm max. 220-230 V/50 Hz 2200 W 10 A 5 N/cm2 80 N/cm2 This appliance complies with the following EEC Directives: 73/23/EEC of 19/02/73 relating to low voltage 89/336/EEC of 03/05/89 relating to electromagnetic compatibility 27 ENGLISH 2 INSTALLATION Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor. P0255 2. Remove the polystyrene block from the bottom of the machine and release the two plastic bags by removing the adhesive strip. 3. Carefully remove the right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine. P0234 2 1 P0233 4. Set the machine upright and remove the two remaining bolts from the back. 5. Pull out the three plastic spacers from the holes into which the bolts were fitted. 6. Plug the open holes with the plugs which you will find in the plastic bag containing the instruction booklet. P0256 P0020 Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. After having levelled the machine, tighten the lock nuts. P0254 P0509 28 Water inlet Connect the water inlet hose to a tap with a 3/4" thread after having inserted the small filter "A" supplied with the machine. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks. The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. A P0003 P0021 Water drainage The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall. In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose. The drain hose must not be kinked. Run it along the floor; only the part near the drainage point must be raised. P0022 P0023 Electrical connection This machine is designed to operate on a 220230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use. Connect the machine to an earthed socket. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. 29 ENGLISH Door reversal The opening direction of the outer door on this washing machine can be reversed. To carry out this operation, proceed as follows: 1) Disengage the end of the catch (1) from the door and turn it through 90° to remove it from its seat (Fig. A). 2) Using a screwdriver, turn plastic plug (2) through 90° to remove it from its seat (Fig. A). 3) Fit plug (2) in the hole left free by catch (1) and turn it through 90° to lock it in place (Fig. B). 4) Fit catch (1) into the hole from which plug (2) was removed and turn it through 90°, making sure that the latching tooth is facing towards the right (Fig. B). 5) Remove the door by unscrewing the screws securing it to the bottom hinge (3 - Fig. A). 6) Unscrew the two plastic screws (4 - Fig. A) and fit them on the opposite side (4 - Fig. B). 7) Remove the catch hook (5 - Fig. A) by inserting a screwdriver into the upper hole and pushing downwards. 8) Remove plate (6) by inserting a screwdriver into the bottom hole and pushing upwards (Fig. A). 9) Refit the catch hook (5) and plate (6) on the opposite sides (Fig. B). 10) Remove the door catch (7) and plate (8) as explained in paragraph 7. 11) Turn the door through 180°. 12) Refit the door catch (7) and plate (8), reversing their position and pressing firmly to engage the hook (Fig. B). 13) Fit the door onto the washing machine. Insert the top pin first, then the bottom pin into the hinge (3- Fig. B); finally screw the hinge onto the washing machine. 14) Check that the door is aligned with the appliance. To do this, loosen screw (9 - Fig. B) by a couple of turns and re-tighten when alignment is correct. 15) Fit the flexible end of the door catch (1 - Fig. B) into the location provided in the door. 6 7 2 5 8 1 93 4 A P0534 1 5 6 7 2 4 39 8 B P0535 Fitting a door panel The door of this washing machine has mouldings to allow fitting of a decorative panel (stainless steel sheet, laminated plastic, wood etc.) to match with the existing kitchen units. The dimensions of the panel must be as follows: Width 588 mm Height 588 mm Maximum thickness 004 mm To fit the panel, remove the moulding by unscrewing its fixing screws. Position the panel, t ...