DISHWASHER ZDT 5044 152964 77/0 INSTRUCTION BOOK UK Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel Prior to using for the first time Setting the water softener Filling with salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine What to do, when... Service and Spare Parts Customer Care Department Guarantee Conditions 3 3 3 4 4 6 6 7 8 9 9 9 10 10 10 11 12 13 14 15 15 15 15 15 16 18 18 19 Installation instructions Building-in Levelling Fixing to adjacent units Water supply connections Water outlet hose connection Electrical connection Hints for test centres 20 20 20 20 20 21 21 22 Technical specifications Dimensions Width Height Max depth Max depth with open door 44.6 cm 81.8 - 87.8 cm 55.5 cm 114 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 50 kPa (0.5 bar) 800 kPa (8 bar) 9 place settings Capacity This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance. Installation q Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact your supplier. For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. Any electrical and plumbing work required to install this appliance should be carried out by a qualified and competent person. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. The sides of the dishwasher must never be drilled to prevent damage to hydraulic components. Disposal Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled. Plastic parts are marked with standard international abbreviations: >PE< for polyethylene, e.g. sheet wrapping material. >PS< for polystyrene, e.g. padding material (always CFCfree). >POM< for polyoxymethylene, e.g. plastic clips. Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling. As and when you cease to use your dishwasher and withdraw it from service, your should render it unserviceable before having it disposed of. Warning! Children at play could lock themselves in your dishwasher or otherwise endanger their lives. Therefore cut off the power supply cable and make the door closing device unusable to prevent children from being trapped inside. For the disposing of the appliance please take it to a recycling centre or to your dealer who may, for a small contribution to the costs, dispose it for you. q q q q Child safety q q This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product. Packaging parts may be dangerous for children, who could even be suffocated! You should therefore keep all packaging well away from children. The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. Keep children well away from your dishwasher when the door is open. Keep all detergents in a safe place out of children's reach. q q q Economical and ecological dishwashing q Ensure that the water softener is correctly adjusted. Do not pre-wash under running water. Select the wash programme to suit the nature and degree of the soiling on the dishes. Do not use more detergent, dishwasher salt and rinse aid than is recommended in these operating instructions and by the manufacturer of the respective product. Your dishwasher in day-to-day use q q q Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher. Under no circumstances should you open the door whilst the appliance is in operation, especially during the washing phase, hot water may escape. However, if the door is opened, a safety device ensures that the machine stops. Only use products (detergent, salt and rinse aid) specifically designed for use in dishwashers. Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. When finishing loading or unloading close the door, as an open door can be a hazard. Do not sit or stand on the open door. Isolate the appliance from the power supply and turn off the water supply after use. This product should be serviced by an authorised service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts. 3 q q q q q q q q q q Description of the appliance 1. 2. 3. 4. 5. 6. 7. 8. 9. Upper basket stop Water hardness switch Salt container Detergent dispenser Control panel Rating plate Rinse aid dispenser Filters Lower spray arm 10. Upper spray arm 11. Upper basket IN155 The control panel Function push buttons On/Off push button Programme selection push buttons Indicator lights Function push buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of these buttons: - water softener setting, - deactivation/activation of the dosage of rinse aid, - the cancelling of a washing programme in progress, - deactivation/activation of the audible signals. Indicator lights: have the following meanings: SALT END OF CYCLE illuminates when the salt has run out and needs replenishing. illuminates when the washing programme has ended, it also has added functions of visual signalling as: - something not working with the machine, - deactivation/activation of the dosage of rinse aid and of the audible signals, - the setting of the water softener. Programme selection push buttons: allows the selection of the desired washing programme (see "Washing programmes" chart). 4 Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: - Setting of the water softener - End of programme - Something not working with the machine Deactivation/activation of the audible signals (The dishwasher must be switched off) Factory setting: audible signals activated 1. Press the On/Off push button. All programme selection push buttons indicator lights will illuminate (setting mode). If only one programme selection push button indicator light is illuminated, this means that a washing programme has been selected. The programme must be cancelled: press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator light of the set programme push button starts flashing for about 2 seconds. After about 2 seconds the indicator lights of all the programme selection push buttons will illuminate indicating that the set programme has been cancelled and that the machine is now in setting mode. 2. Press simultaneously function push buttons 2 and 3, the indicator lights of the function push buttons 1, 2 and 3 start flashing. 3. Press the function push button 3, the indicator lights of function push buttons 1 and 2 turn off while the indicator light of the push button 3 goes on flashing, at the same time the END OF CYCLE indicator light illuminates indicating that the audible signals are active. 4. To deactivate the audible signals, press again the function push button 3, the END OF CYCLE indicator light turns off, indicating that the audible signals have been deactivated. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off push button or wait about 60 seconds after which the dishwasher will automatically return to setting mode. To activate again the dosage of rinse aid simply follow the above operations until the END OF CYCLE indicator light illuminates. 5 Prior to using for the first time Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher salt 5. Fill the rinse aid dispenser b) Setting electronically (The dishwasher must be switched off) The dishwasher is factory set at level 5. 1. Press the On/Off push button. All programme selection push buttons indicator lights will illuminate (setting mode). If only one programme selection push button indicator light is illuminated, this means that a washing programme has been selected. The programme must be cancelled: press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator light of the set programme push button starts flashing for about 2 seconds. After about 2 seconds the indicator lights of all the programme selection push buttons will illuminate indicating that the set programme has been cancelled and that the machine is now in setting mode. 2. Press simultaneously function push buttons 2 and 3, until the indicator lights of the function push buttons 1, 2 and 3 start flashing. 3. Press the function push button 1, the indicator lights of function push buttons 2 and 3 turn off while the indicator light of the push button 1 goes on flashing, at the same time the END OF CYCLE indicator light illuminates, along with a sequence of audible signals. The current level is indicated by the number of flashes of the END OF CYCLE indicator light and of audible signals heard. Example: 5 flashes + 5 audible signals = level 5. 4. To change the level, press push button 1. Each time the push button is pressed the level changes. (For the selection of the new level see the chart). Examples: if the current level is 5, by pressing push button 1 once, level 6 is selected. if the current level is 10, by pressing push button 1 once, level 1 is selected. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off push button or wait about 60 seconds after which the dishwasher will automatically return to setting mode. The water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. Water hardness is measured in equivalent scales, Clarke degrees, French degrees and mmol/l (millimol per litre). The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area. The water softener must be set in both ways: manually, using the water hardness switch and electronically, using the function push buttons on the control panel. a) Setting manually 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3. Turn the water hardness switch to position 1 or 2 (see table). 4. Replace the lower basket. The dishwasher is factory set at position 2. AA07 Water hardness Clarke degrees 64 - 88 53 - 63 46 - 52 36 - 45 28 - 35 23 - 27 18 - 22 13 - 17 5 - 12 <5 °TH (french degrees) mmol/l (millimol per litre, international unit for the hardness of water) Range Adjusting the water hardness setting manually electronically level 10 level 9 level 8 level 7 level 6 level 5 level 4 level 3 level 2 level 1 Number of flashes of the END OF CYCLE indicator light and of audible signals 10 9 8 7 6 5 4 3 2 1 Use of salt 91 - 125 76 - 90 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25 7 - 18 <7 9,0 - 12,5 7,6 - 8,9 6,5 - 7,5 5,1 - 6,4 4,0 - 5,0 3,3 - 3,9 2,6 - 3,2 1,9 - 2,5 0,7 - 1,8 < 0,7 IV IV IV IV IV III III II I/II I 2 2 2 2 2 2 1 1 1 1 6 yes yes yes yes yes yes yes yes yes no Filling with salt Only ...