User Manual Gas Hob ZGS 64IX RO EE LT UA Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance. 2 Contents For the User Important safety information .............................................................................. 4 Operation .......................................................................................................... 6 Using the hob .................................................................................................... 8 Cleaning and Maintenance ................................................................................ 9 Service and original spare parts ....................................................................... 19 European guarantee ........................................................................................ 19 For the Installer Technical data ................................................................................................. 11 Installation ....................................................................................................... 13 Adaptation to different types of gas ................................................................. 14 Electrical connection ....................................................................................... 15 Building in ....................................................................................................... 16 Possibilities for insertion .................................................................................. 18 Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions Step by step instructions for an operation Hints and Tips Environmental information This appliance complies with the following E.E.C. Directives: · 2006/95 (Low Voltage Directive) · 89/336 (Electromagnetical Compatibility Directive) · 90/396 (Gas Appliances) · 93/68 (General Directives) and subsequent modifications. MANUFACTURER: ELECTROLUX HOME PRODUCTS ITALY S.p.A. Viale Bologna, 298 47100 FORLÌ (Italy) 3 Important safety information This warnings has been given for the safety of you and others. We therefore ask you to carefully read the procedures of installing and using this appliance. Installation The work of installation must be carried out by competent and qualified installers according to the regulations in force. · Any modifications to the domestic electrical mains which may be necessary for the installation of the appliance should be carried out only by competent personnel. · If the appliance is out of order, disconnect it from the electric supply. People Safety · This appliance has been designed to be operated by adults and children under supervision. Young children must not be allowed to tamper with the controls or play near or with the oven. · This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely. · Accessible parts of this appliance may become hot when it is in use. Children should be kept away until it has cooled. During Operation · This appliance has been designed for non professional purpose in private houses only. It is meant to cook edible foodstuff only and must not be used for any other purposes. · It is dangerous to alter the specification in any way. · For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats or other foodstuff could result in a fire. · Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts. · Ensure that all control knobs are in the OFF position when not in use. · Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables are not in contact with it and keep them far enough from the heated parts of this appliance. 4 About Installation, Cleaning and Manteinance It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. · Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. · Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen. · Ensure that the gas supply complies with the gas type stated on the identification label, placed near the gas supply pipe. · This appliance is not connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation. · The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood). · Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present. · Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation. · The manufacturer disclaims any responsability should all the safety measures not be carried out. Environmental Information After installation, please dispose of the packaging with due regard to safety and the environment. · When disposing of an old appliance, make it unusable, by cutting off the cable. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. It is very important that this instruction book should be kept safely for future consultation. If the appliance should be sold or given to another person, please ensure that the booklet goes together with it, so that the new owner can know of the functions of the machine and also be aware of the warnings. These instructions are only for the countries stated by the symbol printed on the front cover of this instruction book. Service · Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts. 5 Operation Before using the appliance remove all packaging, including the advertising labels and any protective film. Hob burner control knobs The symbols on the knobs mean: = no gas supply = maximum gas supply = minimum gas supply For easier lighting, proceed before putting a pan on the pan support. Lighting the burners Push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position. Then, check the flame is regular and adjust it as required. If you cannot light the flame even after several attempts, check the "cap" and "crown" (see figure 1 - lett. A, B) are in the correct position. When switching on the mains, after installation or a power cut, it is quite normal for the spark generator to be activated automatically. In the absence of electricity, ignition can occur without the electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position. Do not keep the control knob pressed for more than 15 seconds. 6 A - Burner cap B - Burner crown C - Ignition candle Fig. 1 If the burner does not light even after 15 seconds, release the control knob, turn it the "off" position and wait for at least one minute before trying to light the burner again. To switch off burners To put the flame out, turn the knob to the symbol ( ). 7 Using the hob Practical hints For the correct use of the burners To ensure maximum burner efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used. Rapid Burner diameter 18-26 cm Semi-rapid Burner diameter 12-22 cm Auxiliary Burner diameter 8-16 cm · For easier lighting, proceed before putting a pan on the pan support. · Use only pans or pots with flat bottom. · Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite. · If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the vessel, causing the handle to overheat. · Prolonged cooking with potstones, earthenware pans or cast-iron plates is inadvisable. Also, do not use aluminium foil to protect the top during use. · Make sure pots do not protrude over the edges of the cooktop and that they are centrally positioned on the rings in order to obtain lower gas consumption. · Do not place unstable or deformed pots on the rings: they could tip over or spill their contents, causing accidents. · Pots must not enter the control zone. · If the control knobs become difficult to turn, please contact your local Service Force Centre. · As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering. 8 Fig. 3 Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning machine. The burners The burner caps and crowns can be removed for cleaning. Wash the burners taps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove. After cleaning, be sure to wipe dry with a soft cloth. Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added. Avoid the use of the following: - household detergent and bleaches; - impregnated pads unsuitable for non-stick saucepans; - steel wool pads; - bath/sink stain removers. 9 Should the hob top become heavily soiled, the following products are recommended: - For stainless steel hobs use a proprietary stainless steel cleaner. - For other hobs use Hob Brite or Bar Keepers Friend. Do not leave acid or alkaline substances (e.g. vinegar, salt, lemon juice, etc.) on the cooktop. The Ignition electrode The electric ignition is obtained through a ceramic electrode with a metal electrode. Keep these components very clean, to avoid difficult lighting, and check that the burner crown holes are not obstructed. Periodic Maintenance Periodically ask your local Service Centre to check the conditions of the gas supply pipe and the pressure adjuster, if fitted. 10 Technical data Burner gas power Rapid burner Semi-rapid burner Auxiliary burner Category Gas supply Gas connection Electric supply Appliance class 3,0 kW (natural gas) - 2,8 kW (liquid gas) 2,0 kW 1,0 kW II2H3B/P natural gas G20 (2H) / 20 mbar G 1/2" 230 V~ 50 Hz 3 Hob dimensions Width Depth 580 mm 500 mm Cut out dimensions Width Depth 550 mm 470 mm 11 Gas burners NORMAL POWER BURNER kW kW inj. 100/mm Auxiliary burner Semi-rapid burner Rapid burner m3/h inj. 100/mm REDUCED POWER NORMAL POWER NATURAL GAS G20 (2H) - 20 mbar LPG (Butane/Propane) 30 mbar g/h G30 G31 1,0 0,33 70 0,095 50 73 71 2,0 3,0 (natural gas) 2,8 (liquid gas) 0,45 0,75 96 119 0,190 0,285 71 86 145 204 143 200 By-pass diameters Burner Auxiliary Semi-rapid Rapid Ø By-pass in 1/100 mm. 28 32 42 12 Installation · The following instructions about inst ...